SceSyscon: Difference between revisions
CelesteBlue (talk | contribs) |
CelesteBlue (talk | contribs) |
||
Line 2,297: | Line 2,297: | ||
! Version !! NID | ! Version !! NID | ||
|- | |- | ||
| 0.931.010 || not present | | 0.931.010-0.940 || not present | ||
|- | |- | ||
| 0.990.000-3.740.011 || 0x373ECF8A | | 0.990.000-3.740.011 || 0x373ECF8A |
Revision as of 22:55, 5 January 2024
System Controller.
Module
Version | World | Privilege |
---|---|---|
0.931.010-3.740.011 | Non-secure | Kernel |
Libraries
Known NIDs
Version | Name | World | Visibility | NID |
---|---|---|---|---|
0.931.010-3.740.011 | SceSysconForDriver | Non-secure | Kernel | 0x60A35F64 |
Types
#define SCE_KERNEL_ERROR_SYSCON_ERROR 0x80250000 #define SCE_SYSCON_ERROR_INVALID_SIZE 0x80250001 #define SCE_SYSCON_ERROR_INVALID_ARGUMENT 0x80250002 #define SCE_SYSCON_ERROR_INVALID_POINTER 0x80250003 #define SCE_SYSCON_ERROR_INVALID_STATUS 0x80250004 #define SCE_SYSCON_ERROR_NOT_INTR_ALLOWED 0x80250005 #define SCE_SYSCON_ERROR_TX_SIZE_TOO_LONG 0x80250006 #define SCE_SYSCON_ERROR_ILLEGAL_SIZE 0x80250100 #define SCE_SYSCON_ERROR_ILLEGAL_STATUS 0x80250101 #define SCE_SYSCON_ERROR_NOEXEC 0x80250102 #define SCE_SYSCON_ERROR_INVALID_FLAGS 0x80250105 // Syscon error codes are gotten with 0x80250200 | rx[3], where rx is the data returned by Syscon typedef struct SceSysconPacket { // size is 0x80 struct SceSysconPacket *next; SceUInt32 status; // Lower 16 bits contain flags SceUID semaId; SceUInt32 index; // Out: returns to which packet list the packet was inserted into SceUInt8 tx[32]; // tx[0..1] = cmd, tx[2] = size i.e. sizeof(actual_data)+1, rx[3..31] = actual_data SceUInt8 rx[32]; // rx[0..1] = cmd, rx[2] = size i.e. sizeof(actual_data)+2, rx[3] = error_code, rx[4..31] = actual_data void *tx_extra; void *rx_extra; SceSize rx_extra_size; SceUInt32 rx_offset; int (*callback)(SceSysconPacket *packet, void *argp); void *argp; SceUInt32 time; SceUInt32 unk[5]; } SceSysconPacket; typedef enum SceSysconControl { SCE_SYSCON_CTRL_UP = 0x1, SCE_SYSCON_CTRL_RIGHT = 0x2, SCE_SYSCON_CTRL_DOWN = 0x4, SCE_SYSCON_CTRL_LEFT = 0x8, SCE_SYSCON_CTRL_TRIANGLE = 0x10, SCE_SYSCON_CTRL_CIRCLE = 0x20, SCE_SYSCON_CTRL_CROSS = 0x40, SCE_SYSCON_CTRL_SQUARE = 0x80, SCE_SYSCON_CTRL_SELECT = 0x100, SCE_SYSCON_CTRL_LTRIGGER = 0x200, SCE_SYSCON_CTRL_RTRIGGER = 0x400, SCE_SYSCON_CTRL_START = 0x800, SCE_SYSCON_CTRL_PSBUTTON = 0x1000, SCE_SYSCON_CTRL_POWER = 0x4000, SCE_SYSCON_CTRL_VOLUP = 0x10000, SCE_SYSCON_CTRL_VOLDOWN = 0x20000, SCE_SYSCON_CTRL_HEADPHONE = 0x8000000 } SceSysconControl;
Flags (passed to sceSysconCmdExecForDriver
, etc), also lower bits of status
:
Flags | Meaning |
---|---|
0x1 | Some kind of priority that helps to select to which packet list the packet is inserted into. |
0x100 | Do not insert packet checksum (at tx_buf[2 + len] ), where len = tx_buf[2] . And don't memset the rest of the buffer to -1 (memset(tx_buf + len + 3, -1, 29 - len) ) if len < 29.
|
0x400 | When set, use rx_extra to receive the data. rx_extra_size must be greater than 32. |
0x800 | When set, use tx_extra instead of tx for sending data. The size is contained in tx_extra[2] and must be smaller or equal to 253. When cleared: use tx and the size is contained in tx[2], which has to be smaller or equal 29. |
SceSysconForDriver
sceSysconErnieShutdownForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x94AB13CC |
Calls Syscon command 0xC1.
#define ERNIE_SHUTDOWN_SHUTDOWN 0 #define ERNIE_SHUTDOWN_REBOOT 1 int sceSysconErnieShutdownForDriver(int mode);
sceSysconErnieResetForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x14B99945 |
This is a guessed name. Temp name was sceSysconPowerCtrlKermitResetForDriver.
It issues SMC 0x11A with type=RESET and mode=0: return sceSysconSetPowerModeForDriver(2, 0);
.
int sceSysconErnieResetForDriver(void);
sceSysconErnieHibernateForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.990.000-3.740.011 | 0x4278E614 |
It issues SMC 0x11A with type=HIBERNATE and mode=0: return sceSysconSetPowerModeForDriver(5, 0);
.
int sceSysconErnieHibernateForDriver(void);
sceSysconBatterySWResetForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x87DA378D |
If Syscon version <= 0x70503, it does nothing and returns error 0x8025023F.
int sceSysconBatterySWResetForDriver(void);
sceSysconGetBatteryFullCapForDriver
Version | NID |
---|---|
0.931.010 | not present |
0.990.000-3.740.011 | 0xF93CF833 |
Temp name was sceSysconGetBatteryFullCapacityForDriver.
Used in ScePower's module_start.
int sceSysconGetBatteryFullCapForDriver(SceUInt32 *pCap);
sceSysconGetBertTempForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.990.000 | 0xECFA7242 |
1.000.041-3.740.011 | not present |
This is a guessed name. Another possible name is sceSysconGetBatteryInternalTempForDriver.
Calls Syscon command 0x98B.
int sceSysconGetBertTempForDriver(SceUInt32 *pTemp);
sceSysconGetAbbyTempForDriver
Version | NID |
---|---|
0.931.010-0.990.000 | not present |
1.000.041-3.740.011 | 0xE1885F68 |
This is a guessed name. Another possible name is sceSysconGetBatteryInternalTempForDriver.
Calls Syscon command 0x98B.
int sceSysconGetAbbyTempForDriver(SceUInt32 *pTemp);
sceSysconGetBatteryCycleCountForDriver
Version | NID |
---|---|
0.931.010-0.990.000 | not present |
0.996.090-3.740.011 | 0xCD73079D |
Calls Syscon command 0x98C.
Used in ScePower.
int sceSysconGetBatteryCycleCountForDriver(SceUInt32 *pCount);
sceSysconBatteryStartBLModeForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x2CEF078E |
int sceSysconBatteryStartBLModeForDriver(void);
sceSysconBatteryStopBLModeForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xE4AE7852 |
int sceSysconBatteryStopBLModeForDriver(void);
sceSysconBatterySetBLCommandForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xE4F29744 |
BL command (1 byte at most) must be contained in either unk_byte or pSrc.
int sceSysconBatterySetBLCommandForDriver(SceUInt16 ctx, SceUInt8 unk_byte, void *pSrc, SceUInt8 size);
sceSysconBatteryExecBLCommandForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x74B2AB55 |
int sceSysconBatteryExecBLCommandForDriver(SceUInt16 ctx);
sceSysconBatteryReadBLCommandForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x448DAFF1 |
// size must be between 0 and 0x10 int sceSysconBatteryReadBLCommandForDriver(SceUInt16 ctx, SceUInt8 unk1, SceUInt8 unk2, void *pDst, SceUInt8 size);
sceSysconGetManualChargeModeForDriver
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0x4FEC564C |
int sceSysconGetManualChargeModeForDriver(int *piMode);
sceSysconCtrlManualChargeModeForDriver
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0xC6A2C9EF |
int sceSysconCtrlManualChargeModeForDriver(int mode);
sceSysconGetLogInfoForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.990.000-3.740.011 | 0x701535FC |
typedef struct SceSysconLogInfo { // size is 8 on FW 3.600.011 uint8_t unk_0[8]; } SceSysconLogInfo; int sceSysconGetLogInfoForDriver(SceSysconLogInfo *pInfo);
sceSysconLogStartForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.990.000-3.740.011 | 0x4E55CF5E |
int sceSysconLogStartForDriver(void);
sceSysconLogStartWaitingForDriver
Version | NID |
---|---|
0.931.010-2.12 | not present |
2.500.071-3.740.011 | 0x9C0B1E61 |
int sceSysconLogStartWaitingForDriver(void);
sceSysconLogReadDataForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0x487D97F3 |
int sceSysconLogReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconGetTemperatureLogForDriver
Version | NID |
---|---|
0.931.010-2.12 | not present |
2.500.071-3.740.011 | 0x3B354824 |
sceSysconClearTemperatureLogForDriver
Version | NID |
---|---|
0.931.010-2.12 | not present |
2.500.071-3.740.011 | 0x3843D657 |
sceSysconGetUsbDetStatusForDriver
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0xEF810687 |
Calls Syscon command 0x805.
Maybe supported by PS TV or PS Vita Slim only.
int sceSysconGetUsbDetStatusForDriver(SceUInt32 *pStatus);
sceSysconCtrlDolceLEDForDriver
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0x727F985A |
This is a guessed name.
#define STATE_ON 0 #define STATE_BLINK_SLOW 1 #define STATE_BLINK_FAST 2 int sceSysconCtrlDolceLEDForDriver(SceUInt32 state);
sceSysconGetTimeStampForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x4D588A0A |
This is a guessed named, derived from PSP. Temp name was sceSysconGetBaryonTimestampForDriver.
Returns the timestamp of latest installed Syscon firmware patch, formatted as YYYYMMDDhhmm
. This comes from a string stored in Syscon firmware under another format: $Date:: YYYY-MM-DD hh:mm:ss +0900#$
Example: $Date:: 2013-12-13 15:52:05 +0900#$
in Syscon firmware becomes 201312131552
in Syscon command 2.
// pTimestamp will point to a buffer of size 0x10 bytes, containing a string of size 13 (12: length + 1: terminal character) int sceSysconGetTimeStampForDriver(char *pTimestamp);
sceSysconGetWakeupFactorForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xCF5B2F2F |
Result is 2 bytes wakeup factor coming from Syscon command 0x10.
int sceSysconGetWakeupFactorForDriver(SceUInt32 *pWakeupFactor);
sceSysconCtrlHdmiCecPowerForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x62155962 |
If Syscon version is strictly lower than 0x40000, it does nothing and returns 0.
Sets the pin CDC Hot Plug Detect (HPD) state of the HDMI bridge (AD80244 / ADV7533).
int sceSysconCtrlHdmiCecPowerForDriver(SceBool enable_HDMI_CDC_HPD_pin);
sceSysconCtrlMotionSensorPowerForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x063425AE |
This is a guessed name.
If Syscon version is strictly lower than 0x40000, it does nothing and returns 0.
int sceSysconCtrlMotionSensorPowerForDriver(SceBool enable);
SceSysconForDriver_3FDD29D6
Version | NID |
---|---|
0.931.010-3.740.011 | 0x3FDD29D6 |
int SceSysconForDriver_3FDD29D6(int a1, SceBool use_flag);
sceSysconCtrlVoltageForDriver
Version | NID |
---|---|
0.920.050-3.740.011 | 0x7F198FA2 |
Temp name was sceSysconSetVoltageForDriver.
Used in ScePower.
/* type: 0: Reserved 1: DD1 (VDD - IFTU, DMAC, Internal bus, SPM 32KiB/128KiB) SetSysClockFrequency, SetDmac5ClockFrequency, SetBusClockFrequency, SetCameraBusClockFrequency 2: DD2 (VDDA - ARM core, L2 cache) SetArmClockFrequency 3: DD3 (VDDC - Codec Engine, AVC Decoder) SetVipClockFrequency, SetVeneziaClockFrequency 4: DD4 (VDDG - GPU core) SetGpuClockFrequencyInternal, SetGpuXbarClockFrequency, SetCompatClockFrequency vid: 0x22 (0.34V) 0x8A (1.38V) - (something got from ScePervasiveForDriver) */ #define SCE_SYSCON_VOLTAGE_DD1 (1) #define SCE_SYSCON_VOLTAGE_DD2 (2) #define SCE_SYSCON_VOLTAGE_DD3 (3) #define SCE_SYSCON_VOLTAGE_DD4 (4) int sceSysconCtrlVoltageForDriver(SceUInt32 type, SceUInt32 vid);
sceSysconSetPowerModeForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x8A95D35C |
Temp name was sceSysconResetDeviceForDriver.
It issues SMC 0x11A.
The mode
argument is usually set to 0x2
or sometimes 0x8002
(which seems to correspond to some request by the UDC and BT drivers).
The type
argument determines what to do.
Real definition names are like: "SCE_SYSCON_POWERMODE_MODE_STANDBY".
Type | Description | Syscon command arguments {command_low, command_hi, args_size, ...}
|
---|---|---|
0 | Power off | {0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
1 | Suspend (low-power state) | {0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
2 | Reset (cold reset) | {0x01, 8, 1, 0}
|
3 | ?Reset to update mode? | {0xC1, 0, 2, 0}
|
4 | ?Reset to update mode? | {0xC1, 0, 2, 1}
|
5 | Hibernate | {0xC2, 0, 2, 0x5A}
|
16 | ?Resume? | {0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
17 | Resume (soft reset: suspend and immediately resume) | {0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
int sceSysconSetPowerModeForDriver(int type, int mode);
sceSysconEnableHibernateIOForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.990.000-3.740.011 | 0x4946538A |
int sceSysconEnableHibernateIOForDriver(int maybe_enable);
sceSysconWaitReadyForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0x55DF1C9B |
Temp name was sceSysconWaitInitializedForDriver.
int sceSysconWaitReadyForDriver(void);
sceSysconCmdSyncForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x6E517D22 |
int sceSysconCmdSyncForDriver(SceSysconPacket *packet, int noWait);
sceSysconCmdExecForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x9ADDCA4A |
int sceSysconCmdExecForDriver(SceSysconPacket *packet, unsigned int flags);
sceSysconCmdExecAsyncForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xC2224E82 |
int sceSysconCmdExecAsyncForDriver(SceSysconPacket *packet, u32 flags, int (*callback)(SceSysconPacket *, void *), void *argp);
sceSysconCtrlSdPowerForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xBE1ADE4F |
If Syscon version is strictly lower than 0x40000, it does nothing and returns 0. Calls Syscon command 0x888.
Enables/disables GameCard reader.
Used in SceSdstor.
// param: 1 = enable SD (GameCard reader) power, 0 = disable SD (GameCard reader) power int sceSysconCtrlSdPowerForDriver(SceUInt16 param);
sceSysconCtrlWirelessPowerForDriver
Version | NID |
---|---|
0.931.010-0.995.000 | 0x4FBDA504 |
0.996.090-3.740.011 | not present |
If Syscon version is strictly lower than 0x40000, it does nothing and returns 0. Calls Syscon command 0x88A.
Replaced by function #sceSysconCtrlWirelessPower2ForDriver.
int sceSysconCtrlWirelessPowerForDriver(SceUInt16 param);
sceSysconCtrlWirelessPower2ForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0xA2E85DB9 |
Replacement function for #sceSysconCtrlWirelessPowerForDriver. Calls Syscon command 0x88A.
int sceSysconCtrlWirelessPower2ForDriver(SceUInt16 param);
sceSysconCtrlWirelessPowerDownForDriver
Version | NID |
---|---|
0.931.010-0.995.000 | 0xDF8C6D2D |
0.996.090-3.740.011 | not present |
If motherboard is not "hardware info third byte 0x10" (probably IRS-001), it does nothing and returns 0, probably because missing hardware. Calls Syscon command 0xB1. Wireless power down might be a button to enable/disable Wireless, like on PSP.
int sceSysconCtrlWirelessPowerDownForDriver(SceUInt16 param);
sceSysconGetConfigStorageInfoForDriver
Version | NID |
---|---|
0.995.000-3.740.011 | 0xCE48E8EB |
Get Syscon Config Storage Info using Syscon command 0x1300.
typedef struct SceKernelConfigStorageInfo { // size is 8 bytes SceUInt16 version; SceUInt16 unk_2; SceUInt32 unk_4; } SceKernelConfigStorageInfo; int sceSysconGetConfigStorageInfoForDriver(SceKernelConfigStorageInfo *pInfo);
sceSysconVerifyConfigstorageScriptForDriver
Version | NID |
---|---|
0.931.010-0.990.000 | not present |
0.995.000-3.740.011 | 0xCC6F90A8 |
This function is not used in the OS and anyway it would always return error because it calls a command that is not implemented in Syscon FW.
int sceSysconVerifyConfigstorageScriptForDriver(int a1, void *pScript, SceSize size);
sceSysconLoadConfigstorageScriptForDriver
Version | NID |
---|---|
0.931.010-0.990.000 | not present |
0.995.000-3.740.011 | 0x89C5CFD6 |
The OS uses this function to change between modes: IDU mode, Show Mode, no mode. This works by spoofing or rewriting Hardware Info. This is reboot persistent.
int sceSysconLoadConfigstorageScriptForDriver(int a1, void *pScript, SceSize size);
sceSysconBeginConfigstorageTransactionForDriver
Version | NID |
---|---|
0.931.010 | not present |
0.990.000-3.740.011 | 0xA4968B8C |
int sceSysconBeginConfigstorageTransactionForDriver(void);
sceSysconCommitConfigstorageTransactionForDriver
Version | NID |
---|---|
0.931.010 | not present |
0.990.000-3.740.011 | 0x7B9B3617 |
int sceSysconCommitConfigstorageTransactionForDriver(void);
sceSysconEndConfigstorageTransactionForDriver
Version | NID |
---|---|
0.931.010 | not present |
0.990.000-3.740.011 | 0xFCC3E8EE |
int sceSysconEndConfigstorageTransactionForDriver(void);
sceSysconSetDebugHandlersForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xF245CD6F |
/** A set of debug handlers for syscon, that you can set in sceSysconSetDebugHandlersForDriver(). */ typedef struct SceSysconDebugHandlers { /** Structure size (probably, unused). */ s32 size; /** Callback ran right before running a packet, with a pointer to it passed as the first argument. */ void (*start)(SceSysconPacket *packet); /** Callback ran right after finishing running a packet, with a pointer to it passed as the first argument. */ void (*end)(SceSysconPacket *packet); } SceSysconDebugHandlers; int sceSysconSetDebugHandlersForDriver(SceSysconDebugHandlers *debug_handlers);
sceSysconGetBatteryCalibDataForDriver
Version | NID |
---|---|
0.931.010-3.36 | not present |
3.500.011-3.740.011 | 0x9ADC9936 |
int sceSysconGetBatteryCalibDataForDriver(int *piData1, int *piData2, int *piData3, int *piData4);
sceSysconGetTouchpanelDeviceInfoForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xF492E69E |
typedef struct SceKernelTouchpanelDeviceInfo { // size is 8 bytes uint16_t FrontVendorID; uint16_t FrontFirmwareRev; uint16_t RearVendorID; uint16_t RearFirmwareRev; } SceKernelTouchpanelDeviceInfo; int sceSysconGetTouchpanelDeviceInfoForDriver(SceKernelTouchpanelDeviceInfo *pInfo);
sceSysconGetTouchpanelDeviceInfo2ForDriver
Version | NID |
---|---|
0.931.010-1.50 | not present |
1.690.011-3.740.011 | 0x030D447F |
This is a guessed name.
Returns extended touchpanel info.
// this is a guessed name typedef struct SceKernelTouchpanelInfo { // size is 0xA bytes SceUInt16 vendorID; SceUInt16 firmwareRev; SceUInt16 configRev; SceUInt8 hwVersion; SceUInt8 vendorInfo; SceUInt16 reserved; } SceKernelTouchpanelInfo; // this is a guessed name typedef struct SceKernelTouchpanelDeviceInfo2 { // size is 0x14 bytes SceKernelTouchpanelInfo front; SceKernelTouchpanelInfo rear; } SceKernelTouchpanelDeviceInfo2; int sceSysconGetTouchpanelDeviceInfo2ForDriver(SceKernelTouchpanelDeviceInfo2 *pInfo);
sceSysconMotionGetMeasureDataForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x270B7B0B |
Calls Syscon command 0x400.
sceSysconMotionGetDeviceInfoForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xD01E64FC |
Returns motion sensor device info.
Calls Syscon command 0x480.
See SceMotionDev#sceMotionDevGetDeviceInfoForDriver for the SceKernelMotionDeviceInfo structure.
int sceSysconMotionGetDeviceInfoForDriver(SceKernelMotionDeviceInfo *pInfo);
SceSysconForDriver_9A7858B6
Version | NID |
---|---|
0.931.010-3.740.011 | 0x9A7858B6 |
Calls Syscon command 0x481. Sends 3 bytes to Syscon.
Probably used to send information to the motion sensor device.
int SceSysconForDriver_9A7858B6(SceBool a1, SceUint16 a2);
sceSysconGetHardwareInfoForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xCBD6D8BC |
Returns Hardware Info obtained from Syscon command 0x5.
int sceSysconGetHardwareInfoForDriver(void);
sceSysconGetHardwareInfo2ForDriver
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0x965C68C3 |
Returns Hardware Info 2 obtained from Syscon command 0x6.
This function was certainly added for PS Vita Slim or PS TV support because Hardware Info risked being fulfilled if too many hardware revisions were made.
Used in SceAudioIn (maybe to check Conexant IC), SceCodec (maybe to check Conexant IC), and _vshSysconGetHardwareInfo2.
typedef struct SceKernelHardwareInfo2 { SceUInt8 flags[0x10]; } SceKernelHardwareInfo2; int sceSysconGetHardwareInfo2ForDriver(SceKernelHardwareInfo2 *pInfo);
sceSysconGetErnieVersionForDriver
Version | NID |
---|---|
0.931-3.740.011 | 0xFF86F4C5 |
This is a guessed name. Temp name was sceSysconGetBaryonVersionForDriver.
int sceSysconGetErnieVersionForDriver(void);
SceSysconForDriver_EBE3262C
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0xEBE3262C |
In SceSblPostSsMgr, used just after #sceSysconGetErnieVersionForDriver.
Returns 8 bits of some Syscon Mode information. Bit 6 (from right) is Syscon DownLoader Mode flag. Bit 3 (from right) is Power Online flag.
SceUInt8 SceSysconForDriver_EBE3262C(void);
sceSysconIsDownLoaderModeForDriver
Version | NID |
---|---|
0.931.010 | not present |
0.990.000-3.740.011 | 0x9ADD60D2 |
int sceSysconIsDownLoaderModeForDriver(void);
sceSysconIsDealDownLoaderModeForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xB7BCC638 |
int sceSysconIsDealDownLoaderModeForDriver(void);
sceSysconNopForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x0D0B6D25 |
int sceSysconNopForDriver(void);
sceSysconIsPowerOnlineForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x9DA2A5AB |
Returns true iff Syscon information bit 3 (from right) is set. See also #SceSysconForDriver_EBE3262C.
Used in many ScePower functions for example before setting display brightness (to save battery).
SceBool sceSysconIsPowerOnlineForDriver(void);
sceSysconGetErnieDLVersionForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xD2F456DC |
Calls Syscon command 0x1100.
void sceSysconGetErnieDLVersionForDriver(int *pVersion);
sceSysconGetBatteryVersionForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x68E0031E |
Battery IC name: if HWinfo > 7 "Abby" else "Bert".
int sceSysconGetBatteryVersionForDriver(SceUInt16 *HWinfo, SceUInt16 *FWinfo, SceUInt16 *DFinfo);
sceSysconAbbySyncForDriver
Version | NID |
---|---|
0.931.010-1.81 | not present |
2.000.081-3.740.011 | 0xDFB024C4 |
This is a guessed name.
int sceSysconAbbySyncForDriver(SceUInt32 *puiStatus);
sceSysconGetManufacturesStatusForDriver
Version | NID |
---|---|
0.931.010-1.692.000 | not present |
1.800.071-3.740.011 | 0x3E09A1F4 |
In theory, this function should only be called when Product Mode is already set.
int sceSysconGetManufacturesStatusForDriver(int *piStatus);
sceSysconReadScratchPadForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x299B1CE7 |
Temp name was sceSysconReadCommandForDriver, sceSysconVsReadDataForDriver.
Calls Syscon command 0x90.
Used in SceRtc.
See also Syscon Scratchpad structure.
// size: On FW 3.60, must be between 0 and 0x18. On FW 0.931, must be 2, 4 or 8. // offset: Must be between 0 and 0xFF. // offset + size must not exceed 0x100 int sceSysconReadScratchPadForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconWriteScratchPadForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xE26488B9 |
Temp name was sceSysconSendCommandForDriver, sceSysconVsWriteDataForDriver.
Calls Syscon command 0x91.
See also Syscon Scratchpad structure.
// size: On FW 3.60, must be between 0 and 0x18. On FW 0.931, must be 2, 4 or 8. // offset: Must be between 0 and 0xFF. // offset + size must not exceed 0x100 int sceSysconWriteScratchPadForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconNvsSetRunModeForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x81A6060D |
Used in sceSblNvsReadDataForKernel and sceSblNvsWriteDataForKernel.
// mode: 0 before NVS read/write int sceSysconNvsSetRunModeForDriver(int mode);
sceSysconNvsSetUnkModeForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x2EC6D55D |
// mode: unk int sceSysconNvsSetUnkModeForDriver(int mode);
sceSysconNvsReadDataForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xACAFA2B8 |
Used in sceSblNvsReadDataForKernel and sceSblSsGetNvsDataForDriver.
int sceSysconNvsReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconNvsWriteDataForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x10C9657A |
Used in sceSblNvsWriteDataForKernel and sceSblSsSetNvsDataForDriver.
int sceSysconNvsWriteDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconGetMultiCnInfoForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x1503D6A0 |
Returns data obtained by Syscon command 0x103.
Returns 0x4ff00 when nothing is connected.
Returns 0x40080 when pin 11 is pulled to GND.
Returns 0x40680 when pin 12 is pulled to GND.
Returns 0x40380 when pin 12 is pulled to GND while pin 11 pulled to ground via 100K resistor.
Returns 0x40000 on PSTV
Bits 8 and 9 indicate that an audio-out dock is connected.
Bits 8, 9, 11, 12, 13, 14 and 15 indicate that UDC pins are connected.
Used in SceHpremote, SceUsbServ.
int sceSysconGetMultiCnInfoForDriver(SceUInt32 *pInfo);
sceSysconSetMultiCnPortForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x8AAB6308 |
Used in SceSblPostSsMgr.
// port: 0: for JIG mode, 1 for UART0 logging mode, 0x10000: for normal mode int sceSysconSetMultiCnPortForDriver(int port);
sceSysconConfigLEDForDriver
Version | NID |
---|---|
0.996.090-3.740.011 | 0x6F586D1A |
This is a guessed name.
Used in ScePower.
#define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue) // unk: SceLedConfig.unk_4 int sceSysconConfigLEDForDriver(int device, SceUInt32 unk);
SceSysconForDriver_9CA6EB70
Version | NID |
---|---|
0.931.010 | not present |
1.000.071-3.740.011 | 0x9CA6EB70 |
On motherboards IRT-001 and older, it does nothing and returns 0, probably because missing hardware that could be a LED, else it sends 2 bytes using Syscon command 0x89E.
Used in ScePower#ScePowerForDriver_38415146. Related to LED.
int SceSysconForDriver_9CA6EB70(SceBool state);
sceSysconCtrlAccPowerForDriver
Version | NID |
---|---|
0.931-3.60 | 0x8D1D97E8 |
int sceSysconCtrlAccPowerForDriver(SceBool enable);
sceSysconCtrlUsbStatusForDriver
Version | NID |
---|---|
0.931-3.60 | 0x59DC5938 |
Sends 3 bytes to Syscon command 0x89A.
Related to SceUdcd and ScePower.
int sceSysconCtrlUsbStatusForDriver(SceUInt32 value);
sceSysconCtrlRMRPowerForDriver
Version | NID |
---|---|
0.931.010 | not present |
0.990.000-3.740.011 | 0x710A7CF0 |
Temp name was sceSysconCtrlMsPowerForDriver.
int sceSysconCtrlRMRPowerForDriver(int enable_power);
sceSysconCtrlDevKitUsbPowerForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.990.000-3.740.011 | 0xB1F88B11 |
This is a guessed name.
int sceSysconCtrlDevKitUsbPowerForDriver(SceBool enable);
SceSysconForDriver_3274A925
Version | NID |
---|---|
0.931.010-1.692.000 | not present |
1.800.071-3.740.011 | 0x3274A925 |
Temp name was sceSysconCtrlDolceUsbPowerForDriver.
This function enables/disables a USB bus related to either PS Vita IRS-1001 Wlan/Bt module USB or PS Vita 3G modem USB. This also affects PS TV USB host and maybe also PS TV ethernet.
Used in SceUsbEtherSmsc, SceUsbServ.
This function was maybe added to support IRS-1001 motherboard.
int SceSysconForDriver_3274A925(SceBool enable);
sceSysconJigOpenPortForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x44A173F5 |
int sceSysconJigOpenPortForDriver(void);
sceSysconJigClosePortForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x483FAE05 |
int sceSysconJigClosePortForDriver(void);
sceSysconJigSetConfigForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xD24BF916 |
int sceSysconJigSetConfigForDriver(SceUInt8 a1, SceUInt8 a2);
sceSysconOutputClockForDriver
Version | NID |
---|---|
0.990.000-3.740.011 | 0x058941D7 |
Sends 2 bytes to Syscon using Syscon command 0xB0.
sceSysconCtrlHostOutputViaDongleForDriver
Version | NID |
---|---|
0.931.010 | not present |
0.990.000-3.740.011 | 0xDECCB2B4 |
Enables / disables Kermit UART0 output (logs) via Dongle (Jig).
Sends 2 bytes to Syscon using Syscon command 0xB2.
int sceSysconCtrlHostOutputViaDongleForDriver(SceBool enable);
SceSysconForDriver_33B5CDB3
Version | NID |
---|---|
0.996.090-3.740.011 | 0x33B5CDB3 |
Reads from Syscon using Syscon command 0xB3.
This function was probably added to support IRS-002 motherboard.
SceSysconForDriver_F6D4DDC4
Version | NID |
---|---|
0.931.010-1.692.000 | not present |
1.800.071-3.740.011 | 0xF6D4DDC4 |
Reads from Syscon using Syscon command 0xB4. It is probably the "get" equivalent of #SceSysconForDriver_00AE3AEB.
This function was added to support IRS-1001 motherboard.
SceSysconForDriver_00AE3AEB
Version | NID |
---|---|
0.931.010-1.692.000 | not present |
1.800.071-3.740.011 | 0x00AE3AEB |
It is probably a "sceSysconCtrl...ForDriver" function.
Sends 2 bytes to Syscon using Syscon command 0xB5. It is probably the "set" equivalent of #SceSysconForDriver_F6D4DDC4.
This function was added to support IRS-1001 motherboard.
SceSysconForDriver_0D300158
Version | NID |
---|---|
3.100.081-3.740.011 | 0x0D300158 |
It is probably a "sceSysconCtrl...ForDriver" function.
Sends 2 bytes to Syscon using Syscon command 0xB6. It is probably the "set" equivalent of #SceSysconForDriver_91EF4EC3.
This function was added to support DOL-1002 motherboard.
SceSysconForDriver_91EF4EC3
Version | NID |
---|---|
3.100.081-3.740.011 | 0x91EF4EC3 |
Reads from Syscon using Syscon command 0xB7. It is probably the "get" equivalent of #SceSysconForDriver_0D300158.
This function was added to support DOL-1002 motherboard.
receive_pm_sm_jig_msg_from_syscon
Version | NID |
---|---|
0.931.010-3.740.011 | 0x3C80B529 |
int receive_pm_sm_jig_msg_from_syscon(SceUInt32 offset, SceSize size, void *buf);
send_pm_sm_jig_msg_to_syscon
Version | NID |
---|---|
0.931.010-3.740.011 | 0x7BFBA09E |
send_pm_sm_stop_to_syscon
Version | NID |
---|---|
0.931.010-3.740.011 | 0x933D813F |
Used just after send_pm_sm_jig_msg_to_syscon or when it fails before.
int send_pm_sm_stop_to_syscon(int a1, int a2, int a3);
sceSysconIduModeSetForDriver
Version | NID |
---|---|
0.931.010-0.996.090 | not present |
1.030.071-3.740.011 | 0x956D07CB |
int sceSysconIduModeSetForDriver(void);
sceSysconIduModeClearForDriver
Version | NID |
---|---|
0.931.010-0.996.090 | not present |
1.030.071-3.740.011 | 0x34574496 |
int sceSysconIduModeClearForDriver(void);
sceSysconShowModeSetForDriver
Version | NID |
---|---|
0.931.010-1.50 | not present |
1.600.061-3.740.011 | 0x6D65B70F |
int sceSysconShowModeSetForDriver(void);
sceSysconShowModeClearForDriver
Version | NID |
---|---|
0.931.010-1.50 | not present |
1.600.061-3.740.011 | 0x8D7724C0 |
int sceSysconShowModeClearForDriver(void);
sceSysconSetWlanCallbackForDriver
Version | NID |
---|---|
0.931.010-0.996.090 | 0x4DEB8712 |
1.03-3.740.011 | not present |
This is a guessed name.
Registers a Wlan-related callback.
index 5 on FWs 0.931.010-0.940.
SceSysconForDriver_18A6F4D9
Version | NID |
---|---|
0.990.000-3.740.011 | 0x18A6F4D9 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 0 on FW 3.600.011.
No use case seen.
Related to #SceSysconForDriver_C0F215B7.
int SceSysconForDriver_18A6F4D9(void *cb_0, void *cb_1);
SceSysconForDriver_DE613081
Version | NID |
---|---|
0.990.000-3.740.011 | 0xDE613081 |
A guessed name is sceSysconSetHeadphoneCallbackForDriver.
Registers an headphone remote related callback.
index 1 on FW 3.600.011.
Used in SceHpremote.
Related to #SceSysconForDriver_C3504ADE.
int SceSysconForDriver_DE613081(void *cb_0, void *cb_1);
SceSysconForDriver_229A07C2
Version | NID |
---|---|
0.990.000-3.740.011 | 0x229A07C2 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 2 on FW 3.600.011.
No use case seen.
Related to #SceSysconForDriver_B832B72C.
int SceSysconForDriver_229A07C2(void *cb_0, void *cb_1);
SceSysconForDriver_8351526D
Version | NID |
---|---|
0.990.000-3.740.011 | 0x8351526D |
A guessed name is sceSysconSetAlarmTimerCallbackForDriver.
Registers a callback.
index 3 on FW 3.600.011.
Used in SceRtc.
Related to #SceSysconForDriver_86BAAF7D.
int SceSysconForDriver_8351526D(void *cb_0, void *cb_1);
SceSysconForDriver_9F8340FF
Version | NID |
---|---|
0.990.000-3.740.011 | 0x9F8340FF |
A guessed name is sceSysconSetResumeRequestCallbackForDriver.
Registers the "is resume requested" callback.
Used in ScePower to register a callback that sets the ScePower global variable g_resume_requested to SCE_TRUE.
index 4 on FW 3.600.011.
Related to #SceSysconForDriver_A57B5433.
int SceSysconForDriver_9F8340FF(void *cb_0, void *cb_1);
SceSysconForDriver_35E1689F
Version | NID |
---|---|
0.990.000-3.740.011 | 0x35E1689F |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
Used in SceHpremote.
index 5 on FW 3.600.011.
Related to #SceSysconForDriver_ACC7F71E.
int SceSysconForDriver_35E1689F(void *cb_0, void *cb_1);
SceSysconForDriver_474A9EA7
Version | NID |
---|---|
0.931.010-3.740.011 | 0x474A9EA7 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 0xC on FWs 0.931.010-0.940. index 6 on FW 3.600.011.
Related to #SceSysconForDriver_769F9AC4.
No use case seen.
int SceSysconForDriver_474A9EA7(void *cb_0, void *cb_1);
SceSysconForDriver_4E88B4D9
Version | NID |
---|---|
0.990.000-3.740.011 | 0x4E88B4D9 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 8 on FW 3.600.011.
Related to #SceSysconForDriver_4BC63A40.
No use case seen. Maybe used in internal modules for Jig.
int SceSysconForDriver_4E88B4D9(void *cb_0, void *cb_1);
SceSysconForDriver_376CCCB8
Version | NID |
---|---|
0.990.000-3.740.011 | 0x376CCCB8 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 9 on FW 3.600.011.
Related to #SceSysconForDriver_99A254A9.
No use case seen.
int SceSysconForDriver_376CCCB8(void *cb_0, void *cb_1);
SceSysconForDriver_3BAAC8A9
Version | NID |
---|---|
0.931.010-0.995.000 | not present |
0.996.090-3.740.011 | 0x3BAAC8A9 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 0xA on FW 3.600.011.
Related to #SceSysconForDriver_9A4F4B7C.
No use case seen.
int SceSysconForDriver_3BAAC8A9(void *cb_0, void *cb_1);
sceSysconSetAccCallbackForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.995.000-3.740.011 | 0x4A42712F |
This is a guessed name.
Registers 2 callbacks (maybe constructor and destructor or callback and args) for accessory port.
index 0xF on FW 3.600.011.
Used in SceUsbServ.
int sceSysconSetAccCallbackForDriver(void *cb_0, void *cb_1);
sceSysconSetLowBatteryCallbackForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x3F0DB7C0 |
Registers the low-battery callback.
index 6 on FWs 0.931-0.940. index 0x10 on FW 3.600.011.
int sceSysconSetLowBatteryCallbackForDriver(void *cb_0, void *cb_1);
SceSysconForDriver_80D6E061
Version | NID |
---|---|
1.000.071-3.740.011 | 0x80D6E061 |
A guessed name is sceSysconSetBatteryOnlineCallbackForDriver.
Registers a callback. Maybe related to Battery online status.
index 0x11 on FW 3.600.011.
int SceSysconForDriver_80D6E061(void *cb_0, void *cb_1);
SceSysconForDriver_7682FE69
Version | NID |
---|---|
1.000.071-3.740.011 | 0x7682FE69 |
A guessed name is sceSysconSet...Battery...CallbackForDriver.
Registers a battery-related callback.
No use case seen.
index 0x12 on FW 3.600.011.
Related to #SceSysconForDriver_4A184B7C.
int SceSysconForDriver_7682FE69(void *cb_0, void *cb_1);
SceSysconForDriver_E0D52DF0
Version | NID |
---|---|
0.990.000-3.740.011 | 0xE0D52DF0 |
A guessed name is sceSysconSet...Battery...CallbackForDriver.
Registers a battery-related callback.
No use case seen.
index 0x13 on FW 3.600.011.
Related to #SceSysconForDriver_ACEE1C70.
int SceSysconForDriver_E0D52DF0(void *cb_0, void *cb_1);
SceSysconForDriver_2D471528
Version | NID |
---|---|
0.931.010-0.940 | not present |
1.000.071-3.740.011 | 0x2D471528 |
A guessed name is sceSysconSet...Battery...CallbackForDriver.
Registers a callback very similar to the low battery callback.
Used in ScePower.
index 0x14 on FW 3.600.011.
Related to #SceSysconForDriver_03C50DC3.
int SceSysconForDriver_2D471528(void *cb_0, void *cb_1);
SceSysconForDriver_129EA022
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0x129EA022 |
A guessed name is sceSysconSet...CallbackForDriver.
Used in ScePower.
index 0x15 on FW 3.600.011.
Related to #SceSysconForDriver_BFDA5590.
int SceSysconForDriver_129EA022(void *cb_0, void *cb_1);
SceSysconForDriver_85E5DEBF
Version | NID |
---|---|
0.931.010-0.996.090 | not present |
1.000.071-3.740.011 | 0x85E5DEBF |
A guessed name is sceSysconSet...CallbackForDriver.
index 0x16 on FW 3.600.011.
Related to #SceSysconForDriver_63B14156.
No use case seen.
int SceSysconForDriver_85E5DEBF(void *cb_0, void *cb_1);
sceSysconSetThermalAlertCallbackForDriver
Version | NID |
---|---|
0.931.010-0.996.090 | not present |
1.000.071-3.740.011 | 0x773B8126 |
Registers the thermal alert callback.
index 0x17 on FW 3.600.011.
Related to #SceSysconForDriver_50CAE242.
int sceSysconSetThermalAlertCallbackForDriver(void *cb_0, void *cb_1);
SceSysconForDriver_2E4BA4B8
Version | NID |
---|---|
0.990.000-3.740.011 | 0x2E4BA4B8 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 0x19 on FW 3.600.011.
Related to #SceSysconForDriver_29CF4335.
No use case seen. Maybe used in internal modules for Jig.
int SceSysconForDriver_2E4BA4B8(void *cb_0, void *cb_1);
SceSysconForDriver_C442D0BE
Version | NID |
---|---|
0.931.010-1.692.000 | not present |
1.800.071-3.740.011 | 0xC442D0BE |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 0x1A on FW 3.600.011.
Related to #SceSysconForDriver_9F4042F8.
No use case seen.
int SceSysconForDriver_C442D0BE(void *cb_0, void *cb_1);
SceSysconForDriver_61AE3970
Version | NID |
---|---|
0.931.010-3.01 | not present |
3.100.081-3.740.011 | 0x61AE3970 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 0x1B on FW 3.600.011.
Related to #SceSysconForDriver_C50568E9.
No use case seen.
int SceSysconForDriver_61AE3970(void *cb_0, void *cb_1);
sceSysconSetLowBatteryInhibitUpdateRebootCallbackForDriver
Version | NID |
---|---|
0.931.010-3.18 | not present |
3.300.041-3.740.011 | 0x94678881 |
This is a guessed name.
Registers the low-battery-inhibit-update-reboot callback.
index 0x1C on FW 3.600.011.
No use case seen.
int sceSysconSetLowBatteryInhibitUpdateRebootCallbackForDriver(void *cb_0, void *cb_1);
sceSysconSetLowBatteryInhibitUpdateDownloadCallbackForDriver
Version | NID |
---|---|
0.931.010-3.18 | not present |
3.300.041-3.740.011 | 0x7AA00C01 |
This is a guessed name.
Registers the low-battery-inhibit-update-download callback.
index 0x1D on FW 3.600.011.
No use case seen.
int sceSysconSetLowBatteryInhibitUpdateDownloadCallbackForDriver(void *cb_0, void *cb_1);
SceSysconForDriver_423D0C58
Version | NID |
---|---|
0.990.000-3.740.011 | 0x423D0C58 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 0x20 on FW 3.600.011.
No use case seen.
int SceSysconForDriver_423D0C58(void *cb_0, void *cb_1);
SceSysconForDriver_154676F1
Version | NID |
---|---|
0.990.000-3.740.011 | 0x154676F1 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 0x21 on FW 3.600.011.
No use case seen.
int SceSysconForDriver_154676F1(void *cb_0, void *cb_1);
SceSysconForDriver_63352A39
Version | NID |
---|---|
0.990.000-3.740.011 | 0x63352A39 |
A guessed name is sceSysconSetMicrophoneCallbackForDriver.
Registers a callback.
index 0x22 on FW 3.600.011.
Used in SceHpremote.
int SceSysconForDriver_63352A39(void *cb_0, void *cb_1);
SceSysconForDriver_14730196
Version | NID |
---|---|
0.990.000-3.740.011 | 0x14730196 |
A guessed name is sceSysconSet...CallbackForDriver.
Registers a callback.
index 0x23 on FW 3.600.011.
No use case seen.
int SceSysconForDriver_14730196(void *cb_0, void *cb_1);
sceSysconSetAlarmCallbackForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x32418370 |
Registers the alarm callback.
index 0 on FWs 0.931.010-0.940. index 0x24 on FW 3.600.011.
int sceSysconSetAlarmCallbackForDriver(void *cb_0, void *cb_1);
sceSysconSetMultiCnOtgCallbackForDriver
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0xA26586B2 |
This is a guessed name.
Registers 2 callbacks (maybe constructor and destructor or callback and args) for multi-connector OTG on PS Vita Fat.
index 0x25 on FW 3.600.011.
Used in SceUsbServ.
int sceSysconSetMultiCnOtgCallbackForDriver(void *cb_0, void *cb_1);
sceSysconSetMiniUsbOtgCallbackForDriver
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0x67A4CB9F |
This is a guessed name.
Registers 2 callbacks (maybe constructor and destructor or callback and args) for mini-USB OTG on PS Vita Slim.
index 0x26 on FW 3.600.011.
Used in SceUsbServ.
int sceSysconSetMiniUsbOtgCallbackForDriver(void *cb_0, void *cb_1);
sceSysconUpdaterSetSegmentForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x9B00BC7F |
// segment_no: a 8bit value int sceSysconUpdaterSetSegmentForDriver(SceUInt32 segment_no);
sceSysconUpdaterLoadSegmentForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x356B9696 |
// pSegment: the encrypted segment to load // unk: maybe segment_no // size: usually 0x400 int sceSysconUpdaterLoadSegmentForDriver(void *segment, int unk, SceSize size);
sceSysconUpdaterLoadSegment2ForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x734544E4 |
// pSegment: the encrypted segment to load // unk: maybe segment_no // size: usually 0x400 int sceSysconUpdaterLoadSegment2ForDriver(void *segment, int unk, SceSize size);
sceSysconUpdaterCalcChecksumForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xD27C3D80 |
Computes checksum to use with #sceSysconUpdaterExecProgrammingForDriver. It does not call any Syscon command.
int sceSysconUpdaterCalcChecksumForDriver(void *data, SceSize size, int *checksum);
sceSysconUpdaterExecProgrammingForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x69AD76E4 |
Executes programming, i.e writes segments to Syscon Flash memory.
// checksum: value got from sceSysconUpdaterCalcChecksumForDriver int sceSysconUpdaterExecProgrammingForDriver(int checksum);
sceSysconUpdaterSetRunModeForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xB487C2FB |
On 3.60 Ernie firmware, only updater run mode 0x72BA seems to be actually useful. Modes 0x9A54 and 0x152E are recognized but just make the function return without doing anything. Mode 0xC5E7 is not recognized by Ernie firmware, although it is present on ARM side.
// mode: 0x72BA (0.931.010-3.740.011), 0x9A54 (0.931.010-3.740.011), 0x152E (3.600.011-3.740.011), 0x3665 (3.600.011-3.740.011), 0xC5E7 (3.600.011-3.740.011), int sceSysconUpdaterSetRunModeForDriver(int mode);
sceSysconUpdaterExecFinalizeForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xC7747A63 |
// digest: sha1 of decrypted concatenated segments, comes from Syscon Update package packet type 0x20 // size: usually 0x14 (sha1 size) int sceSysconUpdaterExecFinalizeForDriver(void *digest, SceSize size);
SceSysconForDriver_CBA836FF
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0xCBA836FF |
Sends a 0x18-byte buffer to Syscon command 0x1185. This Syscon command 0x1185 seems to be unimplemented in recent Syscon firmwares: it does not do anything.
// size: must be 0x18 int SceSysconForDriver_CBA836FF(void *pBuf, SceSize size);
snvs_read
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0xEBDF88B9 |
This is a guessed name.
Used in SceSblPostSsMgr to read data from SNVS with pm_sm command 8. Also used in SceSblUpdateMgr with update_service_sm commands 0xB0002 and 0xC0002.
// in_size: 0x10 // out_size: 0x30 int snvs_read(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);
snvs_write
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0x63683B9B |
This is a guessed name.
Used in SceSblPostSsMgr to write data to SNVS with pm_sm command 8. Also used in SceSblUpdateMgr with update_service_sm commands 0xB0002 and 0xC0002.
// in_size: 0x30 // out_size: 0x10 int snvs_write(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);
syscon_update_command_0xD00002
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0x4D03754A |
This is a guessed name.
Calls Syscon command 0xD0.
Used in SceSblUpdateMgr with update_service_sm command 0xD0002.
// in_buf: buffer that embeds input data, usually 0xD0002 command request + 8 // in_size: usually 0x28 // out_buf: buffer to receive result, usually 0xD0002 command request + 0x30 // out_size: usually 0x28 int syscon_update_command_0xD00002(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);
sceSysconSetAffirmativeRertryModeForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x901D6CD4 |
This is an official name. Typo is the name is intentional.
Sets AffirmativeRertryMode flag in kernel memory. During SceSyscon initialization, AffirmativeRertryMode is enabled by default.
AffirmativeRertryMode flag is used by SceSyscon kernel module when executing Syscon commands.
int sceSysconSetAffirmativeRertryModeForDriver(int enable);
sceSysconGetControlsInfoForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x145F59A4 |
This is a guessed name.
See Boot Controls Info.
Calls Syscon command 0x100.
int sceSysconGetControlsInfoForDriver(SceUInt32 *pCtrl);
SceSysconForDriver_76272CB9
Version | NID |
---|---|
0.931.010-1.692.000 | not present |
1.800.071-3.740.011 | 0x76272CB9 |
Gets a 4 byte value.
Calls Syscon command 0x120.
int SceSysconForDriver_76272CB9(SceUInt32 *unk);
sceSysconGetClockForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xD7BEFF8B |
Gets Syscon power-on time in ticks of 0.5 second. Each second the counter automatically increases by 2.
Calls Syscon command 0x11.
Used in SceRtc to calculate the current time and date.
int sceSysconGetClockForDriver(SceUInt32 *puiTime);
SceSysconForDriver_3168F3AF
Version | NID |
---|---|
0.931.010-3.740.011 | 0x3168F3AF |
Calls Syscon command 0x12.
It is an alarm timer. It must be initialized using Syscon command 0x82 via #SceSysconForDriver_51164951.
// FW 0.931.010 int SceSysconForDriver_3168F3AF(SceUInt32 *pResult); // FW 3.600.011-3.740.011 int SceSysconForDriver_3168F3AF(SceUInt32 *pResult, SceUInt32 *pResult2);
SceSysconForDriver_BA09F171
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.990.000-3.740.011 | 0xBA09F171 |
Calls Syscon command 0x13.
It might be related to alarm/timer. Gets 2 bytes from Syscon.
int SceSysconForDriver_BA09F171(SceUInt32 *pResult, SceUInt32 *pResult2);
SceSysconForDriver_93075DD1
Version | NID |
---|---|
0.931.010-3.740.011 | 0x93075DD1 |
Calls Syscon command 0x14. Gets 1 byte from Syscon.
int SceSysconForDriver_93075DD1(SceUInt32 *pResult);
sceSysconSetClockForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x9B6A6F64 |
Calls Syscon command 0x81.
Sets current Syscon power on time in ticks of 0.5 second. The set value can be get with #sceSysconGetClockForDriver.
Used in SceRtc. Set to 0 just before setting Current Tick, to reset syscon power on time.
int sceSysconSetClockForDriver(SceUInt32 time);
SceSysconForDriver_51164951
Version | NID |
---|---|
0.931.010-3.740.011 | 0x51164951 |
Calls Syscon command 0x82. On Syscon version < 0x90907, 4 bytes are sent to Syscon, whilst on Syscon version >= 0x90907, 5 bytes are sent to Syscon.
Used in SceRtc#sceRtcSetAlarmTickForDriver.
The set value can be get with #SceSysconForDriver_3168F3AF.
// a1: seen value: 0xffffffff during Syscon Init // a2: some 8-bit flag, seen value: 0 during Syscon Init // FW 0.931.010 int SceSysconForDriver_51164951(int a1); // FW 3.600.011-3.740.011 int SceSysconForDriver_51164951(int a1, int a2);
SceSysconForDriver_373ECF8A
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.990.000-3.740.011 | 0x373ECF8A |
Calls Syscon command 0x83. Sends 3 bytes to Syscon. Used only if Hardware Info indicates that the motherboard is not IRT-001 or IRT-002 or type 0x10 (maybe named IRS-001) and if console is not in manufacturing mode.
int SceSysconForDriver_373ECF8A(SceUInt32 unk);
SceSysconForDriver_2659535C
Version | NID |
---|---|
0.931.010 | not present |
0.990.000-3.740.011 | 0x2659535C |
Calls Syscon command 0x84. Sends 1 byte to Syscon: 0.
int SceSysconForDriver_2659535C(void);
SceSysconForDriver_4295D497
Version | NID |
---|---|
0.931.010 | not present |
0.990.000-3.740.011 | 0x4295D497 |
Calls Syscon command 0x85. Sends 1 byte to Syscon: 0.
int SceSysconForDriver_4295D497(void);
SceSysconForDriver_253CC522
Version | NID |
---|---|
0.931.010-1.692.000 | not present |
2.100.081-3.740.011 | 0x253CC522 |
Calls Syscon command 0x807. Gets 2 bytes from Syscon.
On DevKit, it returns 0x8025023F. Maybe limited by model: PS TV? PS Vita Slim?.
int SceSysconForDriver_253CC522(SceUInt16 *pResult);
sceSysconGetPowerStatusForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x175CE5A1 |
Calls Syscon command 0x883. Gets 8 bytes from Syscon. Reads Elmo registers 0xA0 through 0xA3.
// pStatus: pointer to a buffer of at least 8 bytes int sceSysconGetPowerStatusForDriver(void *pStatus);
sceSysconCtrlDeviceResetForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x40FF3898 |
Sends 2 bytes to Syscon command 0x88F.
Example:
- (0xC,0) : Touchpanel Front or Rear device
- (0xC,1) : Touchpanel Front or Rear device
int sceSysconCtrlDeviceResetForDriver(SceUInt8 a1, SceUInt8 a2);
SceSysconForDriver_285594F8
Version | NID |
---|---|
0.931.010-3.740.011 | 0x285594F8 |
Sends 2 bytes to Syscon command 0x890.
int SceSysconForDriver_285594F8(SceUInt16 value);
sceSysconCtrlLEDForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x04EC7579 |
#define STATE_ON 1 #define STATE_OFF 0 #define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue) int sceSysconCtrlLEDForDriver(SceUInt16 device, SceBool state);
sceSysconCtrlChargeACForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x596B17B7 |
Sends 2 bytes to Syscon command 0x892. Related to Battery. Maybe enables/disables battery charging.
Used in ScePower's module_start.
int sceSysconCtrlChargeACForDriver(SceBool enable);
sceSysconCtrlChargeVBUSForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x2A4B0437 |
Sends 3 bytes to Syscon command 0x893. Related to Battery. Maybe enables/disables battery charging.
Used in ScePower's module_start.
// a1: ex: 0, 1 // a2: ex: 0, 1 // FW 0.931.010 int sceSysconCtrlChargeVBUSForDriver(SceUInt32 a1); // FW 3.600.011-3.740.011 int sceSysconCtrlChargeVBUSForDriver(SceUInt32 a1, SceUInt32 a2);
SceSysconForDriver_5CDDA14D
Version | NID |
---|---|
0.931.010-3.740.011 | 0x5CDDA14D |
A guessed name is sceSysconCtrlHpremoteForDriver.
If Syscon version < 0x80001, it does nothing and returns 0, else it sends 2 bytes to Syscon command 0x899.
Maybe enables/disables Jack power.
Used in SceHpremote.
int SceSysconForDriver_5CDDA14D(SceBool enable);
SceSysconForDriver_A2FE9BF9
Version | NID |
---|---|
0.931.010-3.740.011 | 0xA2FE9BF9 |
Calls Syscon command 0x800.
Gets information related to battery charge status, or USB power connection. See also Ernie#CMD_0x0800.
Used in ScePower's module_start.
int SceSysconForDriver_A2FE9BF9(void *pResult);
sceSysconGetBatteryTempForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x9070F139 |
If Syscon version <= 0x70503, it calls Syscon command 0x8A0, else Syscon command 0x981.
Used in ScePower's module_start.
int sceSysconGetBatteryTempForDriver(int *pResult);
sceSysconGetBatteryRemainCapForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xC562AF3A |
Temp name was sceSysconGetBatteryRemainCapacityForDriver.
If Syscon version <= 0x70503, it calls Syscon command 0x802, else Syscon command 0x900.
Only used in ScePower.
int sceSysconGetBatteryRemainCapForDriver(SceUInt32 *pResult);
sceSysconGetBatteryVoltForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x03F11220 |
If Syscon version <= 0x70503, it calls Syscon command 0x803, else Syscon command 0x901.
Used in ScePower.
int sceSysconGetBatteryVoltForDriver(SceUInt32 *pResult);
sceSysconGetBatteryLifePercentForDriver
Version | NID |
---|---|
0.931.010-1.06 | not present |
1.500.151-3.740.011 | 0xAD0A8275 |
Used in ScePower.
int sceSysconGetBatteryLifePercentForDriver(SceUInt32 *pResult);
sceSysconGetBatteryFullCapForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x00A65FC1 |
If Syscon version <= 0x70503, it calls Syscon command 0x8A1, else Syscon command 0x982.
Used in ScePower.
int sceSysconGetBatteryFullCapForDriver(int *pResult);
sceSysconGetBatteryElecForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x0826BA07 |
If Syscon version <= 0x70503, it calls Syscon command 0x8A2, else Syscon command 0x983.
Used in ScePower.
int sceSysconGetBatteryElecForDriver(SceUInt16 *pResult);
sceSysconGetBatteryTTEForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xB841C141 |
Temp name was sceSysconGetBatteryLifeTimeForDriver.
If Syscon version <= 0x70503, it calls Syscon command 0x8A3, else Syscon command 0x984.
Used in ScePower.
int sceSysconGetBatteryTTEForDriver(SceUInt16 *pTTE);
sceSysconGetBatterySOHForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x91D3B7A3 |
If Syscon version <= 0x70503, it calls Syscon command 0x8A4, else Syscon command 0x985.
Used in ScePower.
int sceSysconGetBatterySOHForDriver(void *pSOH);
sceSysconReadBatteryRegForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xC2FB5565 |
If Syscon version <= 0x70503, it calls Syscon command 0x8A8, else Syscon command 0x986.
int sceSysconReadBatteryRegForDriver(SceUInt16 offset, SceUInt16 *pRes);
sceSysconWriteBatteryRegForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x9B779DB0 |
If Syscon version <= 0x70503, it calls Syscon command 0x8A9, else Syscon command 0x987.
int sceSysconWriteBatteryRegForDriver(SceUInt16 offset, SceUInt16 value);
SceSysconForDriver_A5AB19B1
Version | NID |
---|---|
0.931.010-3.740.011 | 0xA5AB19B1 |
Read 2 bytes from some Battery device. Is is an alternative register-reading function that seems to be Syscon-side implemented only on internal System Software version 4.00 or DevKit ones.
If Syscon version <= 0x70503, it calls Syscon command 0x8AA, else Syscon command 0x988.
Offset must be between 0 and 0xFFFF else returns error 0x80250001.
int SceSysconForDriver_A5AB19B1(SceUInt16 offset, SceUInt16 *pRes);
SceSysconForDriver_FDB3AE9D
Version | NID |
---|---|
0.931.010-3.740.011 | 0xFDB3AE9D |
Gets 0x10 bytes from Syscon command 0x183.
int SceSysconForDriver_FDB3AE9D(int *pResult);
SceSysconForDriver_C3504ADE
Version | NID |
---|---|
0.931.010-3.740.011 | 0xC3504ADE |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_DE613081.
Used in SceHpremote.
SceBool SceSysconForDriver_C3504ADE(void);
SceSysconForDriver_B832B72C
Version | NID |
---|---|
0.931.010-3.740.011 | 0xB832B72C |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_229A07C2.
SceBool SceSysconForDriver_B832B72C(void);
SceSysconForDriver_86BAAF7D
Version | NID |
---|---|
0.931.010-3.740.011 | 0x86BAAF7D |
A guessed name is sceSysconIsAlarmTimerExistForDriver.
Returns the global variable related to #SceSysconForDriver_8351526D.
Used in SceRtc.
SceBool SceSysconForDriver_86BAAF7D(void);
SceSysconForDriver_A57B5433
Version | NID |
---|---|
0.931.010-3.740.011 | 0xA57B5433 |
A guessed name is sceSysconIsResumeRequestedForDriver.
Related to #SceSysconForDriver_9F8340FF.
SceBool SceSysconForDriver_A57B5433(void);
SceSysconForDriver_ACC7F71E
Version | NID |
---|---|
0.931.010-3.740.011 | 0xACC7F71E |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_35E1689F.
Used in SceHpremote.
SceBool SceSysconForDriver_ACC7F71E(void);
SceSysconForDriver_769F9AC4
Version | NID |
---|---|
0.931.010-3.740.011 | 0x769F9AC4 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_474A9EA7.
Returns always SCE_TRUE on PS TV. This function could be related to USB or ethernet availability.
No use case seen.
SceBool SceSysconForDriver_769F9AC4(void);
SceSysconForDriver_4BC63A40
Version | NID |
---|---|
0.931.010-3.740.011 | 0x4BC63A40 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_4E88B4D9.
Used in SceSblPostSsMgr.
SceBool SceSysconForDriver_4BC63A40(void);
SceSysconForDriver_99A254A9
Version | NID |
---|---|
0.931.010-3.740.011 | 0x99A254A9 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_376CCCB8.
No use case seen.
SceBool SceSysconForDriver_99A254A9(void);
SceSysconForDriver_9A4F4B7C
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0x9A4F4B7C |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_3BAAC8A9.
No use case seen.
SceBool SceSysconForDriver_9A4F4B7C(void);
SceSysconForDriver_92D2C6A4
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0x92D2C6A4 |
int SceSysconForDriver_92D2C6A4(void);
SceSysconForDriver_B9EA2FA8
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.995.000-3.740.011 | 0xB9EA2FA8 |
A guessed name is sceSysconIsAccExistForDriver.
Only used in SceUsbServ.
SceBool SceSysconForDriver_B9EA2FA8(void);
SceSysconForDriver_29CF4335
Version | NID |
---|---|
0.931.010-3.740.011 | 0x29CF4335 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_2E4BA4B8.
It is related to Ernie DL Mode.
Used in SceSblPostSsMgr.
SceBool SceSysconForDriver_29CF4335(void);
SceSysconForDriver_32B2DB3D
Version | NID |
---|---|
0.931.010-3.740.011 | 0x32B2DB3D |
int SceSysconForDriver_32B2DB3D(void);
sceSysconIsHeadphoneExistForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x142D5E82 |
Used in SceHpremote#sceHprmIsHeadphoneExistForDriver.
SceBool sceSysconIsHeadphoneExistForDriver(void);
sceSysconIsMotionDevExistForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x490C5548 |
This is a guessed name.
Used in SceMotionDev.
SceBool sceSysconIsMotionDevExistForDriver(void);
SceSysconForDriver_012B57B3
Version | NID |
---|---|
0.931.010 | not present |
0.940-3.740.011 | 0x012B57B3 |
int SceSysconForDriver_012B57B3(void);
SceSysconForDriver_27758A64
Version | NID |
---|---|
0.931.010-0.940 | not present |
1.000.071-3.740.011 | 0x27758A64 |
A guessed name is sceSysconIsBatteryOnlineForDriver, deriving from #sceSysconIsPowerOnlineForDriver.
Used in ScePower#scePowerGetBatteryRemainLevelForDriver, ScePower#scePowerIsLowBatteryForDriver, ScePower's module_start.
Returns the global variable related to #SceSysconForDriver_80D6E061.
SceBool SceSysconForDriver_27758A64(void);
SceSysconForDriver_4A184B7C
Version | NID |
---|---|
0.931.010-0.940 | not present |
1.000.071-3.740.011 | 0x4A184B7C |
A guessed name is sceSysconIs...ForDriver.
Returns some information about battery.
Used in ScePower#ScePowerForDriver_627A89C6.
Returns the global variable related to #SceSysconForDriver_7682FE69.
SceBool SceSysconForDriver_4A184B7C(void);
SceSysconForDriver_ACEE1C70
Version | NID |
---|---|
0.931.010-0.940 | not present |
0.996.090-3.740.011 | 0xACEE1C70 |
A guessed name is sceSysconIs...ForDriver.
Returns information about battery. Only used when battery is working.
Used in ScePower#ScePowerForDriver_0D56C601.
Returns the global variable related to #SceSysconForDriver_E0D52DF0.
SceBool SceSysconForDriver_ACEE1C70(void);
SceSysconForDriver_03C50DC3
Version | NID |
---|---|
0.931.010-0.940 | not present |
1.000.071-3.740.011 | 0x03C50DC3 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_2D471528.
SceBool SceSysconForDriver_03C50DC3(void);
SceSysconForDriver_BFDA5590
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0xBFDA5590 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_129EA022.
SceBool SceSysconForDriver_BFDA5590(void);
SceSysconForDriver_63B14156
Version | NID |
---|---|
0.931.010-0.996.090 | not present |
1.000.071-3.740.011 | 0x63B14156 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_85E5DEBF.
SceBool SceSysconForDriver_63B14156(void);
SceSysconForDriver_50CAE242
Version | NID |
---|---|
0.931.010-0.940 | not present |
1.000.071-3.740.011 | 0x50CAE242 |
A guessed name is sceSysconIsThermalAlertForDriver.
Returns the global variable related to #sceSysconSetThermalAlertCallbackForDriver.
Used in ScePower.
SceBool SceSysconForDriver_50CAE242(void);
SceSysconForDriver_9F4042F8
Version | NID |
---|---|
0.931.010-1.692.000 | not present |
1.800.071-3.740.011 | 0x9F4042F8 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_C442D0BE.
No use case seen.
SceBool SceSysconForDriver_9F4042F8(void);
SceSysconForDriver_C50568E9
Version | NID |
---|---|
0.931.010-3.01 | not present |
3.100.081-3.740.011 | 0xC50568E9 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_61AE3970.
This function was added to support DOL-1002 motherboard.
No use case seen.
SceBool SceSysconForDriver_C50568E9(void);
sceSysconIsLowBatteryForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xD7F5A797 |
This is a guessed name.
Only used in ScePower.
SceBool sceSysconIsLowBatteryForDriver(void);
sceSysconIsLowBatteryInhibitUpdateRebootForDriver
Version | NID |
---|---|
0.931.010-3.18 | not present |
3.300.041-3.740.011 | 0x1A0C140F |
This function was added along with ScePower#scePowerIsLowBatteryInhibitUpdateReboot.
Used in ScePower#scePowerIsLowBatteryInhibitUpdateReboot.
SceBool sceSysconIsLowBatteryInhibitUpdateRebootForDriver(void);
sceSysconIsLowBatteryInhibitUpdateDownloadForDriver
Version | NID |
---|---|
0.931.010-3.18 | not present |
3.300.041-3.740.011 | 0x1E3130EE |
This function was added along with ScePower#scePowerIsLowBatteryInhibitUpdateDownload.
Used in ScePower#scePowerIsLowBatteryInhibitUpdateDownload.
SceBool sceSysconIsLowBatteryInhibitUpdateDownloadForDriver(void);
sceSysconGetBatteryRemainLevelForDriver
Version | NID |
---|---|
0.931.010-3.18 | not present |
3.300.041-3.740.011 | 0x26F9D729 |
Only used if Syscon version >= 0x1040105.
This function was added along with ScePower#scePowerGetBatteryRemainLevelForDriver.
Used in ScePower#scePowerGetBatteryRemainLevelForDriver.
int sceSysconGetBatteryRemainLevelForDriver(SceUInt8 *pResult1, SceUInt8 *pResult2);
SceSysconForDriver_C0F215B7
Version | NID |
---|---|
0.931.010-0.990.000 | not present |
0.996.090-3.740.011 | 0xC0F215B7 |
A guessed name is sceSysconIs...ForDriver.
Returns the global variable related to #SceSysconForDriver_18A6F4D9.
The global variable is updated by #sceSysconCmdSyncForDriver.
SceBool SceSysconForDriver_C0F215B7(void);
SceSysconForDriver_D6F6D472
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0xD6F6D472 |
Gets electric information (maybe intensity) of the device connected to USB OTG on PS Vita Slim. It should be studied if PS TV supports this function and if this function was initially targetting PS TV.
Returns a global variable updated by #sceSysconCmdSyncForDriver, obtained using Syscon command 0x130.
int SceSysconForDriver_D6F6D472(int *pInfo);
SceSysconForDriver_F99BC858
Version | NID |
---|---|
0.931.010-3.01 | not present |
3.100.081-3.740.011 | 0xF99BC858 |
Detects microSD swap.
Calls syscon command 0x131.
This function was maybe added to support a prototype motherboard that has a microSD port.
int SceSysconForDriver_F99BC858(SceBool *isSwapped);
SceSysconForDriver_E7893732
Version | NID |
---|---|
0.931.010-2.060.011 | not present |
2.100.081-3.740.011 | 0xE7893732 |
Calls Syscon command 0x1B0. Related to UART or JIG on PS Vita Slim or PS TV.
// value holds 3 useful bytes and 1 byte not sent to syscon int SceSysconForDriver_E7893732(int value);
sceSysconGetElmoVersionForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xA039B563 |
Temp name was sceSysconGetElmoFwVersionForDriver.
Calls Syscon command 0x880. Read Elmo registers 0xD0 through 0xEF.
On PS Vita 1000 series with IRS-001 motherboard, Elmo Fw Version is 0x192.
int sceSysconGetElmoVersionForDriver(SceUInt32 *pVersion);
sceSysconGetCookieVersionForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x9BF78047 |
Temp name was sceSysconGetCookieFwVersionForDriver.
Calls Syscon command 0x881.
int sceSysconGetCookieVersionForDriver(SceUInt32 *pVersion);
sceSysconReadElmoRegForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x5BF765BB |
Calls Syscon command 0x895.
sceSysconWriteElmoRegForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xCCC71C28 |
Calls Syscon command 0x896.
sceSysconReadCookieRegForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0x95975DD1 |
Calls Syscon command 0x897.
sceSysconWriteCookieRegForDriver
Version | NID |
---|---|
0.931.010-3.740.011 | 0xF39300D3 |
Calls Syscon command 0x898.
Returns error 0x80250001 if offset is greater than 0xFF.
// offset: 0-0xFF int sceSysconWriteCookieRegForDriver(SceUInt32 offset, SceUInt16 data);
Commands
It seems like the command format is as follows: (direction << 8) | cmd_id
, where direction = 1
means write to syscon, and direction = 0
means read from syscon.
Command | Return size (without considering the 2 bytes rx.size and rx.error_code) | Functions NIDs | Description |
---|---|---|---|
0x0 | 0x0 | 0x0D0B6D25 | sceSysconNopForDriver |
0x1 | 0x4 | module_start | sceSysconGetErnieVersionForDriver. Used during SysconInit. |
0x2 | 0xC | module_start | sceSysconGetTimeStampForDriver. Returns 12-byte string followed by at least 2-byte memory leak. Used during SysconInit. |
0x3 | 0x4 | module_start | sceSysconGetSleepFactor. Used during SysconInit. |
0x4 | 0x4 | Unknown. Run during boot. See Ernie#CMD_0x0004. | |
0x5 | 0x4 | 0xCBD6D8BC, module_start | sceSysconGetHardwareInfoForDriver |
0x6 | 0x10 | 0x965C68C3, module_start | sceSysconGetHardwareInfo2ForDriver. Get Hardware Info 2. See KBL_Param#Hardware_Info_2. |
0x10 | 0x2 | 0xCF5B2F2F | sceSysconGetWakeupFactorForDriver |
0x11 | 0x4 | 0xD7BEFF8B | sceSysconGetClockForDriver |
0x12 | ?0x5 or 0x6? | 0x3168F3AF | SceSysconForDriver_3168F3AF. Gets information about alarm timer. Return value is 1 byte indicating data size then between ?4 and 8? bytes of data. |
0x13 | 0x2 | 0xBA09F171 | SceSysconForDriver_BA09F171 |
0x14 | 0x1 | 0x93075DD1 | SceSysconForDriver_93075DD1 |
0x15 | 0x4 | 0x3E09A1F4 | sceSysconGetManufacturesStatusForDriver |
0x80 | 0x0 | module_start | ?? Used during SysconInit. Sends 2 bytes (ex: 0x0012) to Syscon. |
0x81 | ? | 0x9B6A6F64 | sceSysconSetClockForDriver. Sends 5 bytes to Syscon: 1 byte for size=5 and 4 bytes of data. |
0x82 | ? | 0x51164951 | |
0x83 | ? | 0x373ECF8A | Sends 3 bytes to Syscon. |
0x84 | ? | 0x2659535C | Sends 1 byte to Syscon. |
0x85 | ? | 0x4295D497 | |
0x86 | 8 | 0x701535FC | sceSysconGetLogInfoForDriver |
0x87 | 0 | 0x4E55CF5E | sceSysconLogStartForDriver. Sends 1 byte to Syscon: 0. |
0x88 | 0x18 | 0x487D97F3 | sceSysconLogReadDataForDriver. Sends 2 bytes to Syscon: offset. |
0x89 | 0 | 0x9C0B1E61 | sceSysconLogStartWaitingForDriver. Sends 1 byte to Syscon: 0. |
0x90 | ?0x3B? | 0x299B1CE7 | sceSysconReadScratchPadForDriver |
0x91 | ?0x3B? | 0xE26488B9 | sceSysconWriteScratchPadForDriver |
0xA0 | ?0x10 or 0x28? | second_loader | Handshake during boot. See Ernie_Secure#Ernie_Secure_Commands. |
0xB0 | 0 | 0x058941D7 | sceSysconOutputClockForDriver. Sends 2 bytes to Syscon. |
0xB1 | 0 | 0xDF8C6D2D | sceSysconCtrlWirelessPowerDownForDriver |
0xB2 | 0 | 0xDECCB2B4 | sceSysconCtrlHostOutputViaDongleForDriver. Sends 2 bytes to Syscon. |
0xB3 | at least 1 | 0x33B5CDB3 | ?? |
0xB4 | at least 1 | 0xF6D4DDC4 | ?? |
0xB5 | 0 | 0x00AE3AEB | Probably a control command. Sends 2 bytes to Syscon. |
0xB6 | 0 | 0x0D300158 | Probably a control command. Sends 2 bytes to Syscon. |
0xB7 | at least 1 | 0x91EF4EC3 | ?? |
0xC0 | ?0x3E? | ||
0xC1 | 0 | 0x94AB13CC | sceSysconErnieShutdownForDriver. Sends 2 bytes to Syscon. |
0xD0 | ?0x2A or 0x28? | Handshake before SNVS RW. See Ernie_Secure#Ernie_Secure_Commands. | |
0xD1 | ?0x2? | ||
0xD2 | ?0x30? | second_loader, SNVS functions | SNVS RW. See Ernie_Secure#Ernie_Secure_Commands. |
0xD3 | ?0x12? | ||
0x100 | 0x4 | 0x145F59A4 | sceSysconGetControlsInfoForDriver. Used in SceCtrlVblankHandler in SceCtrl. |
0x101 | 0x8 | sceSysconGetControlsInfo2ForDriver. Used in SceCtrlVblankHandler in SceCtrl. Uses Ernie version and Ernie DL version. | |
0x102 | 0xC | ||
0x103 | 0x4 | 0x1503D6A0 | sceSysconGetMultiCnInfoForDriver |
0x104 | 0xC | sceSysconGetControlsInfo3ForDriver. Used in SceCtrlVblankHandler in SceCtrl. | |
0x105 | ? | Uses string "PS" then "TUV". | |
0x106 | ? | ||
0x107 | ? | ||
0x108 | ? | ||
0x109 | ? | ||
0x110 | ? | ||
0x120 | ? | 0x76272CB9 | ?? |
0x121 | ? | ||
0x130 | 0x4 | module_start, 0xD6F6D472 | Get USB OTG device electric info (maybe intensity). Used during SysconInit. |
0x131 | ?0x1? (read) | 0xF99BC858 | ?? Added on a FW > 2.50 and <= 3.100.081. |
0x140 | ? | ||
0x141 | ? | ||
0x142 | ? | ||
0x143 | ? | ||
0x144 | ? | ||
0x145 | ? | ||
0x146 | ? | ||
0x147 | ? | ||
0x148 | ? | ||
0x150 | ? | ||
0x151 | ? | ||
0x152 | ? | ||
0x153 | ? | ||
0x154 | ? | ||
0x155 | ? | ||
0x156 | ? | ||
0x157 | ? | ||
0x160 | ? | ||
0x161 | ? | ||
0x162 | ? | ||
0x163 | ? | ||
0x168 | ? | ||
0x170 | ? | ||
0x171 | ? | ||
0x172 | ? | ||
0x180 | ? | Set analog sampling. Sends 2 bytes to Syscon: 0 to disable, 1 to enable on Syscon version is < 0x90202, 3 to enable on Syscon version is >= 0x90202. Used in SceCtrlVblankHandler in SceCtrl. | |
0x181 | 0 | 0xCFCEE733 | Sends 2 bytes to Syscon. |
0x182 | ? | ||
0x183 | 0x10 | 0xFDB3AE9D | Gets some info. |
0x184 | ? | ||
0x185 | ? | ||
0x186 | ? | ||
0x187 | ? | ||
0x188 | ? | ||
0x189 | ? | ||
0x18A | ? | ||
0x18B | ? | ||
0x18C | ? | ||
0x18D | ? | ||
0x18E | ? | ||
0x18F | ? | ||
0x190 | 0 | 0x8AAB6308 | sceSysconSetMultiCnPortForDriver. Sends 3 bytes to Syscon. |
0x191 | ? | ||
0x192 | ? | ||
0x1A0 | ? | ||
0x1A1 | ? | ||
0x1B0 | 0 | 0xE7893732 | Sends 3 bytes to Syscon. |
0x1B2 | ? | ||
0x1C0 | ? | ||
0x1C1 | ? | ||
0x1C2 | ? | ||
0x1C3 | ? | ||
0x1C4 | ? | ||
0x1D0 | ? | ||
0x1D1 | ? | ||
0x1D2 | ? | ||
0x1D3 | ? | ||
0x1D4 | ? | ||
0x1D5 | ? | ||
0x1E0 | ? | ||
0x1E1 | ? | ||
0x1E2 | ? | ||
0x1E3 | ? | ||
0x300 | ? | ||
0x301 | ? | ||
0x303 | ? | ||
0x380 | at least 1 | 0xF492E69E | sceSysconGetTouchpanelDeviceInfoForDriver |
0x38A | at least 1 | 0xA1F1B973 | ?? |
0x390 | at least 1 | 0x030D447F | sceSysconGetTouchpanelDeviceInfo2ForDriver |
0x392 | ? | 0x48ED8981, 060E55C1 | |
0x393 | ? | 0x9A28BEEF, 0x8874EF45 | Used in SceSblUpdateMgr |
0x3A0 | ? | ?? | sceSysconTouchStartBlModeForDriver |
0x3A1 | ? | ?? | sceSysconTouchUnlockDeviceForDriver |
0x3A2 | ? | ?? | sceSysconTouchSetProgramDataForDriver |
0x3A3 | ? | ?? | sceSysconTouchExecProgramDataForDriver |
0x3A4 | ? | ?? | sceSysconTouchGetBLStatusForDriver |
0x3A9 | 0 | 0x010F95D9 | Sends 1 byte to Syscon. |
0x3AB | ? | 0x357CC9D9 | |
0x3AC | ? | 0x3664E2C0 | ?? |
0x3AF | ? | 0xB8F4F4E3 | |
0x3B0 | ? | ?? | sceSysconTouchStartBlModeForDriver |
0x3B1 | ? | ?? | sceSysconTouchUnlockDeviceForDriver |
0x3B2 | ? | ?? | sceSysconTouchSetProgramDataForDriver |
0x3B3 | ? | ?? | sceSysconTouchExecProgramDataForDriver |
0x3B4 | ? | ?? | sceSysconTouchGetBLStatusForDriver |
0x3B9 | ? | 0x42E599AC | |
0x3BB | ? | 0xCCA56A16 | |
0x3BC | ? | 0x2E6D97CD | ?? |
0x3BF | ? | 0x240A604E | |
0x3C2 | ? | 0x5946B29B, 0x10327C64 | Used in SceSblUpdateMgr |
0x400 | ? | 0x270B7B0B | sceSysconMotionGetMeasureDataForDriver |
0x480 | 4 | 0xD01E64FC | sceSysconMotionGetDeviceInfoForDriver |
0x481 | ? | 0x9A7858B6 | SceSysconForDriver_9A7858B6 |
0x800 | ?0x2 or 0x4? | 0xA2FE9BF9 | SceSysconForDriver_A2FE9BF9. ScePower related. |
0x801 | 0x0 | ?? | |
0x802 | ?0x4? | 0xC562AF3A | sceSysconGetBatteryRemainCapForDriver. Replaced by Syscon command 0x900 on Syscon version > 0x70503. |
0x803 | 0x4 | 0x03F11220 | sceSysconGetBatteryVoltForDriver. Replaced by Syscon command 0x901 on Syscon version > 0x70503. |
0x804 | ? | ?? | |
0x805 | 4 | 0xEF810687 | sceSysconGetUsbDetStatusForDriver |
0x806 | ?0x1? | 0xE7F5D3DC | Reboots PS Vita? |
0x807 | 0x2 | 0x253CC522 | ?? |
0x820 | 0x0 | 0x727F985A | sceSysconCtrlDolceLEDForDriver. PSTV LED on |
0x821 | 0x0 | 0x727F985A | sceSysconCtrlDolceLEDForDriver. PSTV LED blink slow |
0x822 | 0x0 | 0x727F985A | sceSysconCtrlDolceLEDForDriver. PSTV LED blink fast |
0x840 | ?0x1? | 0x4FEC564C | sceSysconGetManualChargeModeForDriver |
0x841 | ?0x1? | 0x3C3B949C | ?? |
0x842 | ?0x1? | 0x1C29C00E | ?? |
0x843 | ?0x1? | 0x730E4725 | ?? |
0x880 | 0x4 | 0xA039B563 | sceSysconGetElmoVersionForDriver |
0x881 | ? | 0x9BF78047 | sceSysconGetCookieVersionForDriver |
0x882 | 0x6 | 0x68E0031E | sceSysconGetBatteryVersionForDriver. Replaced by Syscon command 0x980 on Syscon version > 0x70503. |
0x883 | 0x8 | 0x175CE5A1 | sceSysconGetPowerStatusForDriver |
0x884 | ? | 0x3FDD29D6 | ?? |
0x885 | ? | 0x79E6DD8B | ?? |
0x886 | ?0x2? | 0x62155962 | sceSysconCtrlHdmiCecPowerForDriver |
0x887 | ? | 0x063425AE | sceSysconCtrlMotionSensorPowerForDriver |
0x888 | ?0x2? | 0xBE1ADE4F | sceSysconCtrlSdPowerForDriver |
0x889 | ?0x2? | 0x8D1D97E8 | sceSysconCtrlAccPowerForDriver |
0x88A | ? | 0x4FBDA504, 0xA2E85DB9 | sceSysconCtrlWirelessPowerForDriver, sceSysconCtrlWirelessPower2ForDriver |
0x88B | ? | 0x5A614349 | ?? |
0x88C | ? | 0xB872E904 | ?? |
0x88D | ? | 0xDD16ABD9 | ?? |
0x88E | 0x0 | 0x7F198FA2 | sceSysconCtrlVoltageForDriver. See Ernie#CMD_0x088E_-_CtrlVoltage. |
0x88F | ?0x2? | 0x40FF3898 | sceSysconCtrlDeviceResetForDriver. ?UsbEtherSmsc and WlanBt related? |
0x890 | ? | 0x285594F8 | ?? |
0x891 | ?0x2? | 0x04EC7579 | sceSysconCtrlLEDForDriver |
0x892 | ?0? | 0x596B17B7 | sceSysconCtrlChargeACForDriver. ScePower related. |
0x893 | ?0? | 0x2A4B0437 | sceSysconCtrlChargeVBUSForDriver. ScePower related. |
0x895 | ? | 0x5BF765BB | sceSysconReadElmoRegForDriver |
0x896 | ? | 0xCCC71C28 | sceSysconWriteElmoRegForDriver |
0x897 | ? | 0x95975DD1 | sceSysconReadCookieRegForDriver |
0x898 | ? | 0xF39300D3 | sceSysconWriteCookieRegForDriver |
0x899 | ?0? | 0x5CDDA14D | ?Guessed name: sceSysconCtrlHpremoteForDriver? SceHpremote related. |
0x89A | ?0? | 0x59DC5938 | sceSysconCtrlUsbStatusForDriver |
0x89B | ?0x2? | 0x710A7CF0 | sceSysconCtrlRMRPowerForDriver |
0x89C | ?0x2? | 0xB1F88B11 | sceSysconCtrlDevKitUsbPowerForDriver. SceUsbServ related. |
0x89D | ? | 0x6F586D1A | sceSysconConfigLEDForDriver |
0x89E | ? | 0x9CA6EB70 | ScePower related |
0x89F | ? | 0xCB41B531 | ?? |
0x8A0 | ?0x4? | 0x9070F139 | sceSysconGetBatteryTempForDriver. Replaced by Syscon command 0x981 on Syscon version > 0x70503. |
0x8A1 | ?0x3B or 0x4? | 0x00A65FC1 | sceSysconGetBatteryFullCapForDriver. Replaced by Syscon command 0x982 on Syscon version > 0x70503. ScePower related. |
0x8A2 | 0x2 | 0x0826BA07 | sceSysconGetBatteryElecForDriver. Replaced by Syscon command 0x983 on Syscon version > 0x70503. |
0x8A3 | ?0x4? | 0xB841C141 | sceSysconGetBatteryTTEForDriver. Replaced by Syscon command 0x984 on Syscon version > 0x70503. |
0x8A4 | ?0x4? | 0x91D3B7A3 | sceSysconGetBatterySOHForDriver. Replaced by Syscon command 0x985 on Syscon version > 0x70503. |
0x8A8 | 2 | 0xC2FB5565 | sceSysconReadBatteryRegForDriver. Replaced by Syscon command 0x986 on Syscon version > 0x70503. |
0x8A9 | ? | 0x9B779DB0 | sceSysconWriteBatteryRegForDriver. Replaced by Syscon command 0x987 on Syscon version > 0x70503. |
0x8AA | 2 | 0xA5AB19B1 | SceSysconForDriver_A5AB19B1. Replaced by Syscon command 0x988 on Syscon version > 0x70503. |
0x8B0 | ? | 0x4946538A | sceSysconBatteryStartBLModeForDriver. Replaced by Syscon command 0x9B0 on Syscon version > 0x70503. Since FW 0.940, it is also used by sceSysconEnableHibernateIOForDriver independently of Syscon version. |
0x8B1 | ? | 0xE4AE7852 | sceSysconBatteryStopBLModeForDriver. Replaced by Syscon command 0x9B1 on Syscon version > 0x70503. |
0x8B2 | ? | 0xE4F29744 | sceSysconBatterySetBLCommandForDriver. Replaced by Syscon command 0x9B2 on Syscon version > 0x70503. |
0x8B3 | ? | 0x74B2AB55 | sceSysconBatteryExecBLCommandForDriver. Replaced by Syscon command 0x9B3 on Syscon version > 0x70503. |
0x8B4 | ? | 0x448DAFF1 | sceSysconBatteryReadBLCommandForDriver. Replaced by Syscon command 0x9B4 on Syscon version > 0x70503. |
0x8C0 | ? | 0xC6A2C9EF | sceSysconCtrlManualChargeModeForDriver |
0x8C3 | ? | ?? | sceSysconCtrlSupplyCurrentAcForDriver |
0x8C4 | ? | ?? | sceSysconCtrlSupplyCurrentUsbForDriver |
0x8C5 | ?0x2 or 0? | 0x3274A925 | ??. SceUsbServ and SceUsbEtherSmsc related. |
0x8C6 | ? | 0xDFB024C4 | sceSysconAbbySyncForDriver. SceSblUpdateMgr related |
0x8C7 | ? | 0x87FF8041 | ?? |
0x8C8 | ? | 0x7BFA95DA | ?? |
0x8C9 | ? | 0x451C1662 | ?? |
0x8CA | ? | 0x79074DE4 | ?? |
0x8CB | ? | 0x7D25F6D2 | ?? |
0x8CC | ? | 0xD2ADABCA | ?? |
0x8CE | 0x10 | 0x3B354824 | sceSysconGetTemperatureLog |
0x8CF | 0 | 0x3843D657 | sceSysconClearTemperatureLog. Sends 2 bytes to syscon. |
0x8D0 | ? | 0xF87679EE | ?? |
0x900 | ?0x4? | 0xC562AF3A | sceSysconGetBatteryRemainCapForDriver. Replaces Syscon command 0x802 on Syscon version > 0x70503. |
0x901 | 0x4 | 0x03F11220 | sceSysconGetBatteryVoltForDriver. Replaces Syscon command 0x803 on Syscon version > 0x70503. |
0x902 | ?0x4? | 0xAD0A8275 | sceSysconGetBatteryLifePercentForDriver |
0x903 | 0x2 | 0x26F9D729 | sceSysconGetBatteryRemainLevelForDriver. Added on a FW higher than 2.50 and Syscon version >= 0x1040105. |
0x904 | ? | 0x9ADC9936 | sceSysconGetBatteryCalibDataForDriver |
0x910 | ? | ||
0x911 | ? | ||
0x912 | ? | ||
0x913 | ? | ||
0x914 | ? | ||
0x915 | ? | ||
0x916 | ? | ||
0x917 | ? | ||
0x932 | ? | ||
0x944 | ? | ||
0x945 | ? | ||
0x952 | ? | Uses string "PC" then "TUV". | |
0x953 | ? | ||
0x954 | ? | ||
0x961 | ? | ||
0x962 | ? | ||
0x963 | ? | ||
0x964 | ? | ||
0x965 | ? | ||
0x966 | ? | ||
0x967 | ? | ||
0x968 | ? | ||
0x969 | ? | ||
0x980 | 0x6 | 0x68E0031E | sceSysconGetBatteryVersionForDriver. Replaces Syscon command 0x882 on Syscon version > 0x70503. |
0x981 | ?0x4? | 0x9070F139 | sceSysconGetBatteryTempForDriver. Replaces Syscon command 0x8A0 on Syscon version > 0x70503. |
0x982 | ?0x4? | 0x00A65FC1 | sceSysconGetBatteryFullCapForDriver. Replaces Syscon command 0x8A1 on Syscon version > 0x70503. ScePower related. |
0x983 | 0x2 | 0x0826BA07 | sceSysconGetBatteryElecForDriver. Replaces Syscon command 0x8A2 on Syscon version > 0x70503. |
0x984 | ?0x4? | 0xB841C141 | sceSysconGetBatteryTTEForDriver. Replaces Syscon command 0x8A3 on Syscon version > 0x70503. |
0x985 | ?0x4? | 0x91D3B7A3 | sceSysconGetBatterySOHForDriver. Replaces Syscon command 0x8A4 on Syscon version > 0x70503. |
0x986 | 2 | 0xC2FB5565 | sceSysconReadBatteryRegForDriver. Replaces Syscon command 0x8A8 on Syscon version > 0x70503. |
0x987 | ? | 0x9B779DB0 | sceSysconWriteBatteryRegForDriver. Replaces Syscon command 0x8A9 on Syscon version > 0x70503. |
0x988 | 2 | 0xA5AB19B1 | SceSysconForDriver_A5AB19B1. Replaces Syscon command 0x8AA on Syscon version > 0x70503. |
0x989 | ? | 0x87DA378D | sceSysconBatterySWResetForDriver |
0x98A | ?between 0x2 and 0x4? | 0xF93CF833 | sceSysconGetBatteryFullCapForDriver |
0x98B | ?between 0x2 and 0x4? | 0xECFA7242 / 0xE1885F68 | sceSysconGetBertTempForDriver / sceSysconGetAbbyTempForDriver |
0x98C | ?0x4? | 0xCD73079D | sceSysconGetBatteryCycleCountForDriver |
0x9B0 | ? | 0x2CEF078E / 0x4946538A | sceSysconBatteryStartBLModeForDriver. Replaces Syscon command 0x8B0 on Syscon version > 0x70503. Since FW 0.940, it is also used by sceSysconEnableHibernateIOForDriver independently of Syscon version. |
0x9B1 | ? | 0xE4AE7852 | sceSysconBatteryStopBLModeForDriver. Replaces Syscon command 0x8B1 on Syscon version > 0x70503. |
0x9B2 | ? | 0xE4F29744 | sceSysconBatterySetBLCommandForDriver. Replaces Syscon command 0x8B2 on Syscon version > 0x70503. |
0x9B3 | ? | 0x74B2AB55 | sceSysconBatteryExecBLCommandForDriver. Replaces Syscon command 0x8B3 on Syscon version > 0x70503. |
0x9B4 | ? | 0x448DAFF1 | sceSysconBatteryReadBLCommandForDriver. Replaces Syscon command 0x8B4 on Syscon version > 0x70503. |
0xA00 | 0x0 | ?? | |
0xA82 | ? | 0x7BAFE083 | ?? |
0x1080 | ?0x0 or 0x2? | 0x81A6060D | sceSysconNvsSetRunModeForDriver |
0x1081 | ?0x0 or 0x2? | 0x2EC6D55D | sceSysconNvsSetUnkModeForDriver |
0x1082 | ?around 0x20? | 0xACAFA2B8 | sceSysconNvsReadDataForDriver |
0x1083 | ?0x2? | 0x10C9657A | sceSysconNvsWriteDataForDriver |
0x1100 | 0x4 | 0xD2F456DC | sceSysconGetErnieDLVersionForDriver |
0x1101 | 0x4 | ||
0x1180 | ? | 0x9B00BC7F | sceSysconUpdaterSetSegmentForDriver |
0x1181 | ? | 0x356B9696, 0x734544E4 | sceSysconUpdaterLoadSegmentForDriver, sceSysconUpdaterLoadSegment2ForDriver |
0x1182 | ? | 0x69AD76E4 | sceSysconUpdaterExecProgrammingForDriver |
0x1183 | ? | 0xB487C2FB | sceSysconUpdaterSetRunModeForDriver |
0x1184 | ? | 0xC7747A63 | sceSysconUpdaterExecFinalizeForDriver |
0x1185 | ? | 0xCBA836FF | SceSysconForDriver_CBA836FF |
0x1300 | 0x8 | 0xCE48E8EB | sceSysconGetConfigStorageInfoForDriver |
0x1310 | 0x1 | 0x351946B0 | ?? |
0x1382 | ? | 0xA4968B8C | sceSysconBeginConfigstorageTransactionForDriver |
0x1383 | ? | 0xFCC3E8EE | sceSysconEndConfigstorageTransactionForDriver |
0x1384 | ? | 0x7B9B3617 | sceSysconCommitConfigstorageTransactionForDriver |
0x1385 | ? | 0x89C5CFD6 | sceSysconLoadConfigstorageScriptForDriver |
0x1386 (called from ARM Kernel but not implemented in Syscon FW) | ? | 0xCC6F90A8 | sceSysconVerifyConfigstorageScriptForDriver |
0x1392 | ? | 0xFD65FFCB | ?? |
0x1393 | ? | 0x02350352 | ?? |
0x1394 | ? | 0x7DE84CE3 | ?? |
0x2080 | ? | 0x44A173F5 | sceSysconJigOpenPortForDriver |
0x2081 | ? | 0x483FAE05 | sceSysconJigClosePortForDriver |
0x2082 | ? | 0xD24BF916 | sceSysconJigSetConfigForDriver |
0x2083 | ? | ||
0x2084 | ? | ||
0x2085 | ? |
Callbacks
All the following exported functions have this function prototype: int sceSysconSet...Callback(void (*func)(int enable, void *argp), void *argp);
.
See also SilverSpring's PSP Syscon callbacks enum and PSPSDK power callbacks enum.