System controller
Module
Version |
World |
Privilege
|
1.69-3.60 |
Non-secure |
Kernel
|
Libraries
Known NIDs
Version |
Name |
World |
Visibility |
NID
|
1.69-3.60 |
SceSysconForDriver |
Non-secure |
Kernel |
0x60A35F64
|
Types
#define SCE_KERNEL_ERROR_SYSCON_ERROR 0x80250000
#define SCE_SYSCON_ERROR_INVALID_SIZE 0x80250001
#define SCE_SYSCON_ERROR_INVALID_ARGUMENT 0x80250002
#define SCE_SYSCON_ERROR_INVALID_POINTER 0x80250003
#define SCE_SYSCON_ERROR_INVALID_STATUS 0x80250004
#define SCE_SYSCON_ERROR_NOT_INTR_ALLOWED 0x80250005
#define SCE_SYSCON_ERROR_TX_SIZE_TOO_LONG 0x80250006
#define SCE_SYSCON_ERROR_ILLEGAL_SIZE 0x80250100
#define SCE_SYSCON_ERROR_ILLEGAL_STATUS 0x80250101
#define SCE_SYSCON_ERROR_NOEXEC 0x80250102
#define SCE_SYSCON_ERROR_INVALID_FLAGS 0x80250105
// for Ernie error code
// 0x802502XX. Returned with 0x80250200 | rx[3], where rx is the returned data by Syscon
typedef struct SceSysconPacket {
struct SceSysconPacket *next; // 0x00
u32 status; // Lower 16 bits contain flags
SceUID semaId; // 0x08
u32 index; // Out: returns to which packet list the packet was inserted into
u8 tx[32]; // tx[0..1] = cmd, tx[2] = size
u8 rx[32]; // rx[0..1] = cmd?, rx[2] = size?
void *tx_extra;
u8 *rx_extra;
u32 rx_extra_size;
u32 rx_offset;
int (*callback)(SceSysconPacket *packet, void *argp);
void *argp;
u32 time;
u32 unk2[5];
} SceSysconPacket; /* size 0x80 */
Flags (passed to ksceSysconCmdExec
, etc), also lower bits of status
:
Flags |
Meaning
|
0x1 |
Some kind of priority that helps to select to which packet list the packet is inserted into.
|
0x100 |
Do not insert packet checksum (at tx_buf[2 + len] ), where len = tx_buf[2] . And don't memset the rest of the buffer to -1 (memset(tx_buf + len + 3, -1, 29 - len) ) if len < 29.
|
0x400 |
When set, use rx_extra to receive the data. rx_extra_size must be greater than 32.
|
0x800 |
When set: use tx_extra instead of tx for sending data. The size is contained in tx_extra[2] and must be smaller or equal to 253. When cleared: use tx and the size is contained in tx[2], which has to be smaller or equal 29.
|
SceSysconForDriver
sceSysconErnieShutdownForDriver
Version |
NID
|
0.931-3.60 |
0x94AB13CC
|
#define ERNIE_SHUTDOWN_SHUTDOWN 0
#define ERNIE_SHUTDOWN_REBOOT 1
int sceSysconErnieShutdownForDriver(int mode);
sceSysconPowerCtrlKermitResetForDriver
Version |
NID
|
0.931-3.60 |
0x14B99945
|
int sceSysconPowerCtrlKermitResetForDriver(void);
sceSysconBatteryExecBLCommandForDriver
Version |
NID
|
0.990-3.60 |
0x74B2AB55
|
int sceSysconBatteryExecBLCommandForDriver(int ctx);
sceSysconBatteryReadBLCommandForDriver
Version |
NID
|
0.990-3.60 |
0x448DAFF1
|
int sceSysconBatteryReadBLCommandForDriver(int ctx, int unk1, int unk2, void *buf, SceSize size);
sceSysconBatterySetBLCommandForDriver
Version |
NID
|
0.990-3.60 |
0xE4F29744
|
int sceSysconBatterySetBLCommandForDriver(int ctx, int unk, void *src, SceSize size);
sceSysconBatteryStartBLModeForDriver
Version |
NID
|
0.990-3.60 |
0x2CEF078E
|
int sceSysconBatteryStartBLModeForDriver(void);
sceSysconBatteryStopBLModeForDriver
Version |
NID
|
0.990-3.60 |
0xE4AE7852
|
int sceSysconBatteryStopBLModeForDriver(void);
sceSysconBatterySWResetForDriver
Version |
NID
|
0.990-3.60 |
0x87DA378D
|
int sceSysconBatterySWResetForDriver(void);
SceSysconForDriver_ACEE1C70
Version |
NID
|
3.60 |
0xACEE1C70
|
related to battery, called by ScePowerForDriver_0D56C601.
SceSysconForDriver_4A184B7C
Version |
NID
|
3.60 |
0x4A184B7C
|
related to battery, called by ScePowerForDriver_627A89C6.
sceSysconIsLowBatteryInhibitUpdateRebootForDriver
Version |
NID
|
3.60 |
0x1A0C140F
|
used by scePowerIsLowBatteryInhibitUpdateReboot
int sceSysconIsLowBatteryInhibitUpdateRebootForDriver(unk);
sceSysconIsLowBatteryInhibitUpdateDownloadForDriver
Version |
NID
|
3.60 |
0x1E3130EE
|
used by scePowerIsLowBatteryInhibitUpdateDownload
int sceSysconIsLowBatteryInhibitUpdateDownloadForDriver(unk);
sceSysconGetManualChargeModeForDriver
Version |
NID
|
3.60 |
0x4FEC564C
|
sceSysconCtrlManualChargeModeForDriver
Version |
NID
|
3.60 |
0xC6A2C9EF
|
int sceSysconCtrlManualChargeModeForDriver(int mode);
sceSysconGetLogInfoForDriver
Version |
NID
|
3.60 |
0x701535FC
|
sceSysconLogStartForDriver
Version |
NID
|
3.60 |
0x4E55CF5E
|
sceSysconLogStartWaitingForDriver
Version |
NID
|
3.60 |
0x9C0B1E61
|
sceSysconLogReadDataForDriver
Version |
NID
|
3.60 |
0x487D97F3
|
sceSysconGetTemperatureLogForDriver
Version |
NID
|
3.60 |
0x3B354824
|
sceSysconClearTemperatureLogForDriver
Version |
NID
|
3.60 |
0x3843D657
|
sceSysconGetUsbDetStatusForDriver
Version |
NID
|
3.60 |
0xEF810687
|
sceSysconGetBaryonTimestampForDriver
Version |
NID
|
3.60 |
0x4D588A0A
|
A temp name was sceSysconGetTimeStampForDriver.
int sceSysconGetBaryonTimestampForDriver(char timeStamp[16]);
sceSysconWaitInitializedForDriver
Version |
NID
|
3.60 |
0x55DF1C9B
|
int sceSysconWaitInitializedForDriver(void);
sceSysconCtrlHdmiCecPowerForDriver
Version |
NID
|
0.940-3.60 |
0x62155962
|
Sets the pin CDC Hot Plug Detect (HPD) state of the HDMI bridge (AD80244 / ADV7533).
int sceSysconCtrlHdmiCecPowerForDriver(SceBool enable_HDMI_CDC_HPD_pin);
sceSysconCmdSyncForDriver
Version |
NID
|
3.60 |
0x6E517D22
|
int sceSysconCmdSyncForDriver(SceSysconPacket *packet, int noWait);
sceSysconCtrlRMRPowerForDriver
Version |
NID
|
3.60 |
0x710A7CF0
|
Temp name was sceSysconCtrlMsPowerForDriver.
int sceSysconCtrlRMRPowerForDriver(int enable_power);
sceSysconSetPowerModeForDriver
Version |
NID
|
0.940-3.60 |
0x8A95D35C
|
Temp name was sceSysconResetDeviceForDriver.
int sceSysconSetPowerModeForDriver(int type, int mode);
It issues SMC #0
with r12 = 0x11A
.
The mode
argument is usually set to 0x2
or sometimes 0x8002
(which seems to correspond to some request by the UDC and BT drivers).
The type
argument determines what to do.
Real define names are like: "SCE_SYSCON_POWERMODE_MODE_STANDBY".
Type |
Description |
Syscon command
|
0 |
Power off |
{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
1 |
Suspend (low-power state) |
{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
2 |
Cold reset |
{0x01, 8, 1, 0}
|
3 |
?Reset to update mode? |
{0xC1, 0, 2, 0}
|
4 |
?Reset to update mode? |
{0xC1, 0, 2, 1}
|
5 |
Hibernate |
{0xC2, 0, 2, 0x5A}
|
16 |
?? |
{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
17 |
Soft reset (suspend and immediately resume) |
{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
sceSysconEnableHibernateIOForDriver
Version |
NID
|
0.990-3.60 |
0x4946538A
|
sceSysconCmdExecForDriver
Version |
NID
|
0.990-3.60 |
0x9ADDCA4A
|
int sceSysconCmdExecForDriver(SceSysconPacket *packet, unsigned int flags);
sceSysconCtrlSdPowerForDriver
Version |
NID
|
3.60 |
0xBE1ADE4F
|
used by SceSdstor
int sceSysconCtrlSdPowerForDriver(int enable_power);
sceSysconCtrlWirelessPowerForDriver
Version |
NID
|
0.990 |
0x4FBDA504
|
3.60 |
unk
|
sceSysconCtrlWirelessPowerDownForDriver
Version |
NID
|
0.990 |
0xDF8C6D2D
|
3.60 |
unk
|
sceSysconCmdExecAsyncForDriver
Version |
NID
|
3.60 |
0xC2224E82
|
int sceSysconCmdExecAsyncForDriver(SceSysconPacket *packet, u32 flags, int (*callback)(SceSysconPacket *, void *), void *argp);
sceSysconVerifyConfigstorageScriptForDriver
Version |
NID
|
3.60 |
0xCC6F90A8
|
sceSysconLoadConfigstorageScriptForDriver
Version |
NID
|
3.60 |
0x89C5CFD6
|
sceSysconBeginConfigstorageTransactionForDriver
Version |
NID
|
0.990-3.60 |
0xA4968B8C
|
int sceSysconBeginConfigstorageTransactionForDriver(void);
sceSysconCommitConfigstorageTransactionForDriver
Version |
NID
|
0.990-3.60 |
0x7B9B3617
|
int sceSysconCommitConfigstorageTransactionForDriver(void);
sceSysconEndConfigstorageTransactionForDriver
Version |
NID
|
0.990-3.60 |
0xFCC3E8EE
|
int sceSysconEndConfigstorageTransactionForDriver(void);
sceSysconSetDebugHandlersForDriver
Version |
NID
|
0.990-3.60 |
0xF245CD6F
|
/** A set of debug handlers for syscon, that you can set in sceSysconSetDebugHandlersForDriver(). */
typedef struct SceSysconDebugHandlers {
/** Structure size (probably, unused). */
s32 size;
/** Callback ran right before running a packet, with a pointer to it passed as the first argument. */
void (*start)(SceSysconPacket *packet);
/** Callback ran right after finishing running a packet, with a pointer to it passed as the first argument. */
void (*end)(SceSysconPacket *packet);
} SceSysconDebugHandlers;
int sceSysconSetDebugHandlersForDriver(SceSysconDebugHandlers *debug_handlers);
sceSysconGetBatteryCalibDataForDriver
Version |
NID
|
3.60 |
0x9ADC9936
|
sceSysconGetTouchpanelDeviceInfoForDriver
Version |
NID
|
0.990-3.60 |
0xF492E69E
|
typedef struct SceKernelTouchpanelDeviceInfo {
uint16_t FrontVendorID;
uint16_t FrontFwVersion;
uint16_t BackVendorID;
uint16_t BackFwVersion;
} SceKernelTouchpanelDeviceInfo;
int sceSysconGetTouchpanelDeviceInfoForDriver(SceKernelTouchpanelDeviceInfo *pInfo);
sceSysconGetTouchpanelDeviceInfoForDriverExt
Version |
NID
|
0.990-3.60 |
0x030D447F
|
Returns extended panel info.
typedef struct SceKernelTouchpanelDeviceInfoExt {
uint16_t FrontVendorID;
uint16_t FrontFwVersion;
uint16_t FrontUnk1;
uint8_t FrontUnk2;
uint8_t FrontUnk3;
uint16_t unused1;
uint16_t BackVendorID;
uint16_t BackFwVersion;
uint16_t BackUnk1;
uint8_t BackUnk2;
uint8_t BackUnk3;
uint16_t unused2;
} SceKernelTouchpanelDeviceInfoExt;
int sceSysconGetTouchpanelDeviceInfoForDriverExt(SceKernelTouchpanelDeviceInfoExt *pInfo);
sceSysconGetHardwareInfoForDriver
Version |
NID
|
0.931-3.60 |
0xCBD6D8BC
|
Return Ernie HW info. Hardcoded value seen: 0x102400.
int sceSysconGetHardwareInfoForDriver(void);
sceSysconGetHardwareInfo2ForDriver
Version |
NID
|
3.60 |
0x965C68C3
|
//"hwinfo = 0x%08x, id = 0x%llx, hwtype = 0x%08x"
typedef struct SceKernelHardwareInfo2 {
int hwinfo;
uint64_t id; // unsure
int hwtype; // unsure
} SceKernelHardwareInfo2;
int sceSysconGetHardwareInfo2ForDriver(SceKernelHardwareInfo2 *pInfo);
sceSysconGetBaryonVersionForDriver
Version |
NID
|
0.931-3.60 |
0xFF86F4C5
|
On PSVita it is Ernie Version not Baryon Version.
int sceSysconGetBaryonVersionForDriver(void);
SceSysconForDriver_0D0B6D25
Version |
NID
|
3.60 |
0x0D0B6D25
|
SceSysconForDriver_4BC63A40
Version |
NID
|
3.60 |
0x4BC63A40
|
SceSysconForDriver_EBE3262C
Version |
NID
|
1.03-3.60 |
0xEBE3262C
|
In SceSblPostSsMgr, used just after sceSysconGetBaryonVersionForDriver.
Return some Syscon Mode information. Bit 6 (from right) is Syscon DownLoader Mode flag. Bit 3 (from right) is some flag.
int SceSysconForDriver_EBE3262C(void);
sceSysconGetErnieDLVersionForDriver
Version |
NID
|
0.931-3.60 |
0xD2F456DC
|
Runs syscon command 0x1100.
void sceSysconGetErnieDLVersionForDriver(int *pVersion);
sceSysconGetBatteryVersionForDriver
Version |
NID
|
0.931-3.60 |
0x68E0031E
|
Battery IC name: if HWinfo > 7 "Abby" else "Bert".
int sceSysconGetBatteryVersionForDriver(int *HWinfo, int *FWinfo, int *DFinfo);
sceSysconGetManufacturesStatusForDriver
Version |
NID
|
3.60 |
0x3E09A1F4
|
Unverified name.
SceSysconForDriver_9DA2A5AB
Version |
NID
|
3.60 |
0x9DA2A5AB
|
Used by scePowerGetBatteryLifeTime and other ScePower functions.
int SceSysconForDriver_9DA2A5AB(void);
sceSysconVsReadDataForDriver
Version |
NID
|
0.931-3.60 |
0x299B1CE7
|
Temp name was sceSysconReadCommandForDriver.
Calls syscon command 0x90.
Used by SceRtc.
// size: On FW 3.60, must be between 0 and 0x18. On FW 0.931, must be 2, 4 or 8.
// offset: Must be between 0 and 0xFF.
// offset + size must not exceed 0x100
int sceSysconVsReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconVsWriteDataForDriver
Version |
NID
|
0.931-3.60 |
0xE26488B9
|
Temp name was sceSysconSendCommandForDriver.
Calls syscon command 0x91.
Used by SceRtc and ScePower.
// size: On FW 3.60, must be between 0 and 0x18. On FW 0.931, must be 2, 4 or 8.
// offset: Must be between 0 and 0xFF.
// offset + size must not exceed 0x100
int sceSysconVsWriteDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconNvsSetRunModeForDriver
Version |
NID
|
0.931-3.60 |
0x81A6060D
|
Used by sceSblNvsReadDataForKernel and sceSblNvsWriteDataForKernel.
// mode: 0 before read/write
int sceSysconNvsSetRunModeForDriver(int mode);
sceSysconNvsSetUnkModeForDriver
Version |
NID
|
0.931-3.60 |
0x2EC6D55D
|
// mode: unk
int sceSysconNvsSetUnkModeForDriver(int mode);
sceSysconNvsReadDataForDriver
Version |
NID
|
0.931-3.60 |
0xACAFA2B8
|
Used by sceSblSsNvsReadDataForKernel and sceSblSsGetNvsDataForDriver.
int sceSysconNvsReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconNvsWriteDataForDriver
Version |
NID
|
0.931-3.60 |
0x10C9657A
|
Used by sceSblSsNvsWriteDataForKernel and sceSblSsSetNvsDataForDriver.
int sceSysconNvsWriteDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconGetMultiCnInfoForDriver
Version |
NID
|
3.60 |
0x1503D6A0
|
sceSysconSetMultiCnPortForDriver
Version |
NID
|
0.940-3.60 |
0x8AAB6308
|
// port: 0: for JIG mode, 0x10000: for normal mode
int sceSysconSetMultiCnPortForDriver(int port);
SceSysconForDriver_9CA6EB70
Version |
NID
|
1.03-3.60 |
0x9CA6EB70
|
Sends value using Syscon command 0x89E. Does nothing on prototype models with motherboards IRT-001 and older.
Related to LED.
int SceSysconForDriver_9CA6EB70(SceBool state);
sceSysconCtrlLEDForDriver
Version |
NID
|
0.931-3.60 |
0x04EC7579
|
#define STATE_ON 1
#define STATE_OFF 0
#define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue)
int sceSysconCtrlLEDForDriver(int device, SceBool state);
sceSysconCtrlDolceLEDForDriver
Version |
NID
|
0.931 |
not present
|
3.60 |
0x727F985A
|
This is a guessed name.
#define STATE_ON 0
#define STATE_BLINK_SLOW 1
#define STATE_BLINK_FAST 2
int sceSysconCtrlDolceLEDForDriver(SceUInt32 state);
sceSysconConfigLEDForDriver
Version |
NID
|
3.60 |
0x6F586D1A
|
This is a guessed name.
#define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue)
// unk: SceLedConfig.unk_4
int sceSysconConfigLEDForDriver(int device, SceUInt32 unk);
sceSysconCtrlAccPowerForDriver
Version |
NID
|
0.940-3.60 |
0x8D1D97E8
|
int sceSysconCtrlAccPowerForDriver(SceBool enable);
sceSysconCtrlDeviceResetForDriver
Version |
NID
|
0.990-3.60 |
0x40FF3898
|
sceSysconJigOpenPortForDriver
Version |
NID
|
0.940-3.60 |
0x44A173F5
|
int sceSysconJigOpenPortForDriver(void);
sceSysconJigClosePortForDriver
Version |
NID
|
0.940-3.60 |
0x483FAE05
|
int sceSysconJigClosePortForDriver(void);
sceSysconJigSetConfigForDriver
Version |
NID
|
0.940-3.60 |
0xD24BF916
|
int sceSysconJigSetConfigForDriver(char a1, char a2);
sceSysconCtrlHostOutputViaDongleForDriver
Version |
NID
|
0.990-3.60 |
0xDECCB2B4
|
Connect / disconnect PSVita SLIM Jig Host.
int sceSysconCtrlHostOutputViaDongleForDriver(SceBool enable);
receive_pm_sm_jig_msg_from_syscon
Version |
NID
|
0.940-3.60 |
0x3C80B529
|
int receive_pm_sm_jig_msg_from_syscon(SceUInt32 offset, SceSize size, void *buf);
send_pm_sm_jig_msg_to_syscon
Version |
NID
|
0.940-3.60 |
0x7BFBA09E
|
send_pm_sm_stop_to_syscon
Version |
NID
|
0.990-3.60 |
0x933D813F
|
Used just after send_pm_sm_jig_msg_to_syscon or when it fails before.
int send_pm_sm_stop_to_syscon(int a1, int a2, int a3);
sceSysconIduModeSetForDriver
Version |
NID
|
3.60 |
0x956D07CB
|
sceSysconIduModeClearForDriver
Version |
NID
|
3.60 |
0x34574496
|
sceSysconShowModeSetForDriver
Version |
NID
|
3.60 |
0x6D65B70F
|
sceSysconShowModeClearForDriver
Version |
NID
|
3.60 |
0x8D7724C0
|
sceSysconIsDownLoaderModeForDriver
Version |
NID
|
3.60 |
0x9ADD60D2
|
sceSysconIsDealDownLoaderModeForDriver
Version |
NID
|
0.990-3.60 |
0xB7BCC638
|
sceSysconSetAlarmCallbackForDriver
Version |
NID
|
3.60 |
0x32418370
|
sceSysconSetWlanCallbackForDriver
Version |
NID
|
0.990 |
0x4DEB8712
|
3.60 |
not present
|
This is a guessed name.
Looks like sceSysconSetAlarmCallbackForDriver.
sceSysconSetLowBatteryCallbackForDriver
Version |
NID
|
3.60 |
0x3F0DB7C0
|
sceSysconSetThermalAlertCallbackForDriver
Version |
NID
|
3.60 |
0x773B8126
|
sceSysconUpdaterCalcChecksumForDriver
Version |
NID
|
0.990-3.60 |
0xD27C3D80
|
int sceSysconUpdaterCalcChecksumForDriver(void *segment, SceSize segment_size, int *checksum);
sceSysconUpdaterExecFinalizeForDriver
Version |
NID
|
0.990-3.60 |
0xC7747A63
|
// size is usually 0x14
int sceSysconUpdaterExecFinalizeForDriver(void *buf, SceSize size);
sceSysconUpdaterExecProgrammingForDriver
Version |
NID
|
0.990-3.60 |
0x69AD76E4
|
int sceSysconUpdaterExecProgrammingForDriver(int checksum);
sceSysconUpdaterSetRunModeForDriver
Version |
NID
|
0.990-3.60 |
0xB487C2FB
|
// mode: 0x3665, 0xc5e7, 0x9a54
int sceSysconUpdaterSetRunModeForDriver(int mode);
SceSysconForDriver_CBA836FF
Version |
NID
|
3.60 |
0xCBA836FF
|
int SceSysconForDriver_CBA836FF(void *buf, SceSize size);
sceSysconUpdaterSetSegmentForDriver
Version |
NID
|
0.990-3.60 |
0x9B00BC7F
|
int sceSysconUpdaterSetSegmentForDriver(SceUInt32 segment_no);
snvs_read
Version |
NID
|
1.03-3.60 |
0xEBDF88B9
|
Used in SceSblPostSsMgr to read data from SNVS with pm_sm command 8. Also used in update_mgr with update_service_sm commands 0xB0002 and 0xC0002.
// in_size: 0x10
// out_size: 0x30
int snvs_read(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);
snvs_write
Version |
NID
|
1.03-3.60 |
0x63683B9B
|
Used in SceSblPostSsMgr to write data to SNVS with pm_sm service 8. Also used in update_mgr with update_service_sm commands 0xB0002 and 0xC0002.
// in_size: 0x30
// out_size: 0x10
int snvs_write(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);
syscon_update_command_0xD00002
Version |
NID
|
3.60 |
0x4D03754A
|
Used in update_mgr with update_service_sm command 0xD0002.
Calls syscon command 0xD0.
int syscon_update_command_0xD00002(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);
SceSysconForDriver_D7F5A797
Version |
NID
|
0.996-3.60 |
0x4D03754A
|
int SceSysconForDriver_D7F5A797(void);
SceSysconForDriver_C562AF3A
Version |
NID
|
0.931-3.60 |
0xC562AF3A
|
Only used by ScePower.
If Ernie version is greater than 0x70503 it calls syscon command 0x900 else syscon command 0x802.
pOut value comes from Syscon. Only 4 bytes are copied to pOut.
int SceSysconForDriver_C562AF3A(SceUInt32 *pOut);
SceSysconForDriver_901D6CD4
Version |
NID
|
0.931-3.60 |
0x901D6CD4
|
Sets a flag used internally by SceSyscon.
Used by SceCtrl.
int SceSysconForDriver_901D6CD4(int enable);
SceSysconForDriver_145F59A4
Version |
NID
|
0.931-3.60 |
0x145F59A4
|
Gets unk_CC. See KBL Param.
Runs syscon command 0x100.
int SceSysconForDriver_145F59A4(SceUInt32 *unk_CC);
SceSysconForDriver_76272CB9
Version |
NID
|
0.931-0.940 |
not present
|
3.60 |
0x76272CB9
|
Gets a 4 byte value.
Runs syscon command 0x120.
int SceSysconForDriver_76272CB9(SceUInt32 *unk);
Commands used by function
It seems like the command format is as follows: (direction << 8) | cmd_id
, where direction = 1
means write to syscon, and direction = 0
means read from syscon.
Commands used
|
NID
|
Description
|
0x1
|
module_start
|
"Baryon" (Ernie) version. Used during SysconInit. Returned by sceSysconGetBaryonVersionForDriver.
|
0x2
|
module_start
|
Returns 12 bytes.
|
0x3
|
module_start
|
?? Used during SysconInit
|
0x10
|
0xCF5B2F2F
|
??
|
0x11
|
0xD7BEFF8B
|
??
|
0x13
|
0xBA09F171
|
??
|
0x14
|
0x93075DD1
|
??
|
0x15
|
0x3E09A1F4
|
sceSysconGetManufacturesStatusForDriver
|
0x80
|
module_start
|
?? used at SysconInit
|
0x90
|
|
sceSysconVsReadDataForDriver
|
0x91
|
|
sceSysconVsWriteDataForDriver
|
0xA0
|
second_loader
|
See Ernie Secure.
|
0xB0
|
0x058941D7
|
??
|
0xB2
|
0xDECCB2B4
|
sceSysconCtrlHostOutputViaDongleForDriver
|
0xB3
|
0x33B5CDB3
|
??
|
0xB4
|
0xF6D4DDC4
|
??
|
0xB7
|
0x91EF4EC3
|
??
|
0xD2
|
second_loader, SNVS functions
|
See Ernie Secure.
|
0x100
|
0x145F59A4
|
??
|
0x120
|
0x76272CB9
|
??
|
0x130
|
module_start
|
?? used during SysconInit
|
0x131
|
0xF99BC858
|
??
|
0x190
|
0x8AAB6308
|
sceSysconSetMultiCnPortForDriver
|
0x38A
|
0xA1F1B973
|
??
|
0x3AC
|
0x3664E2C0
|
??
|
0x3BC
|
0x2E6D97CD
|
??
|
0x480
|
0xD01E64FC
|
??
|
0x800
|
0xA2FE9BF9
|
?? related to Ernie#CMD_0x0800
|
0x805
|
0xEF810687
|
sceSysconGetUsbDetStatusForDriver
|
0x806
|
0xE7F5D3DC
|
Reboots Vita?
|
0x807
|
0x253CC522
|
??
|
0x820
|
0x727F985A
|
PSTV LED on
|
0x821
|
0x727F985A
|
PSTV LED blink slow
|
0x822
|
0x727F985A
|
PSTV LED blink fast
|
0x840
|
0x4FEC564C
|
sceSysconGetManualChargeModeForDriver
|
0x841
|
0x3C3B949C
|
??
|
0x842
|
0x1C29C00E
|
??
|
0x843
|
0x730E4725
|
??
|
0x880
|
0xA039B563
|
??
|
0x881
|
0x9BF78047
|
??
|
0x884
|
0x3FDD29D6
|
??
|
0x885
|
0x79E6DD8B
|
??
|
0x886
|
0x62155962
|
sceSysconCtrlHdmiCecPowerForDriver
|
0x887
|
0x063425AE
|
??
|
0x888
|
0xBE1ADE4F
|
sceSysconCtrlSdPowerForDriver
|
0x889
|
0x8D1D97E8
|
sceSysconCtrlAccPowerForDriver. ?F00D and USB related?
|
0x88A
|
0xA2E85DB9
|
Wlan/Bluetooth related
|
0x88B
|
0x5A614349
|
??
|
0x88C
|
0xB872E904
|
??
|
0x88D
|
0xDD16ABD9
|
??
|
0x88E
|
0x7F198FA2
|
maybe related to clock frequency. see Ernie#CMD_0x088E
|
0x88F
|
0x40FF3898
|
sceSysconCtrlDeviceResetForDriver ?UsbEtherSmsc and WlanBt related?
|
0x890
|
0x285594F8
|
??
|
0x891
|
0x04EC7579
|
sceSysconCtrlLEDForDriver
|
0x892
|
0x596B17B7
|
ScePower related
|
0x893
|
0x2A4B0437
|
ScePower related
|
0x899
|
0x5CDDA14D
|
SceHpremote related
|
0x89A
|
0x59DC5938
|
SceUdcd and ScePower related
|
0x89B
|
0x710A7CF0
|
sceSysconCtrlRMRPowerForDriver
|
0x89C
|
0xB1F88B11
|
SceUsbServ related
|
0x89D
|
0x6F586D1A
|
?sceSysconConfigLEDForDriver?
|
0x89E
|
0x9CA6EB70
|
ScePower related
|
0x89F
|
0xCB41B531
|
??
|
0x8A0
|
0x9070F139
|
ScePower related
|
0x8A1
|
0x00A65FC1
|
??
|
0x8A2
|
0x0826BA07
|
??
|
0x8C0
|
|
sceSysconCtrlManualChargeModeForDriver
|
0x8C5
|
0x3274A925
|
SceUsbServ and SceUsbEtherSmsc related
|
0x8C6
|
0xDFB024C4
|
SceSblUpdateMgr related
|
0x8C7
|
0x87FF8041
|
??
|
0x8C8
|
0x7BFA95DA
|
??
|
0x8C9
|
0x451C1662
|
??
|
0x8CA
|
0x79074DE4
|
??
|
0x8CB
|
0x7D25F6D2
|
??
|
0x8CC
|
0xD2ADABCA
|
??
|
0x8CE
|
0x3B354824
|
sceSysconGetTemperatureLog
|
0x8CF
|
0x3843D657
|
sceSysconClearTemperatureLog
|
0x8D0
|
0xF87679EE
|
??
|
0x900, 0x802
|
0xC562AF3A
|
??
|
0x901, 0x803
|
0x03F11220
|
??
|
0x902
|
0xAD0A8275
|
??
|
0x903
|
0x26F9D729
|
??
|
0x981
|
0x9070F139
|
??
|
0x982
|
0x00A65FC1
|
??
|
0x983
|
0x0826BA07
|
??
|
0x984
|
0xB841C141
|
??
|
0x985
|
0x91D3B7A3
|
??
|
0x98A
|
0xF93CF833
|
??
|
0x98B
|
0xE1885F68
|
??
|
0x98C
|
0xCD73079D
|
??
|
0x9B0
|
|
sceSysconBatteryStartBLModeForDriver
|
0x9B1
|
|
sceSysconBatteryStopBLModeForDriver
|
0xA82
|
0x7BAFE083
|
??
|
0x1080
|
0x81A6060D
|
sceSysconNvsSetRunModeForDriver
|
0x1081
|
0x2EC6D55D
|
sceSysconNvsSetUnkModeForDriver
|
0x1082
|
|
sceSysconNvsReadDataForDriver
|
0x1083
|
|
sceSysconNvsWriteDataForDriver
|
0x1100
|
0xD2F456DC
|
sceSysconGetErnieDLVersionForDriver
|
0x1183
|
|
sceSysconUpdaterSetRunModeForDriver
|
0x1310
|
0x351946B0
|
??
|
0x1382
|
0xA4968B8C
|
sceSysconBeginConfigstorageTransactionForDriver
|
0x1383
|
0xFCC3E8EE
|
sceSysconEndConfigstorageTransactionForDriver
|
0x1384
|
0x7B9B3617
|
sceSysconCommitConfigstorageTransactionForDriver
|
0x1392
|
0xFD65FFCB
|
??
|
0x1393
|
0x02350352
|
??
|
0x1394
|
0x7DE84CE3
|
??
|
Callbacks
All the following exports have this function prototype: int sceSysconSet*Callback(void (*func)(int enable, void *argp), void *argp);
.
Maybe we will find more same as on PSP: SilverSpring's PSP Syscon callbacks enum.
NID |
Function |
Description
|
0x129EA022 |
?? |
??
|
0x14730196 |
?? |
??
|
0x2D471528 |
?? |
??. Set by ScePower. Very similar to SYSCON_CB_LOW_BATTERY.
|
0x32418370 |
sceSysconSetAlarmCallbackForDriver |
SYSCON_CB_ALARM. Set by ScePower.
|
0x3F0DB7C0 |
sceSysconSetLowBatteryCallbackForDriver |
SYSCON_CB_LOW_BATTERY. Set by ScePower.
|
0x773B8126 |
sceSysconSetThermalAlertCallbackForDriver |
SYSCON_CB_THERMAL_ALERT. Set by ScePower.
|
0x80D6E061 |
?? |
??. Set by ScePower.
|
0x9F8340FF |
?? |
??
|