Difference between revisions of "Error codes"
Jump to navigation
Jump to search
(→0x800f) |
|||
| Line 1: | Line 1: | ||
| + | == format == | ||
| + | |||
| + | <source lang="C"> | ||
| + | bit 31: Whether there is an error | ||
| + | - 1= error(Bits 30-0 follow the definition below) | ||
| + | - 0= success(Definition of bits 30-0 is free) | ||
| + | |||
| + | bit 30: Error criticality (Critical) | ||
| + | - 1= Fatal error | ||
| + | - 0= Normal error | ||
| + | |||
| + | bit 29,28: Reserved | ||
| + | - 00= Always fixed to zero | ||
| + | |||
| + | bit 27-16: Facility | ||
| + | - 0x000= Reserved | ||
| + | - 0x001= SCE_ERROR_FACILITY_ERRNO | ||
| + | - 0x002= SCE_ERROR_FACILITY_KERNEL | ||
| + | |||
| + | bit 15-0: Error code | ||
| + | - The specific meaning depends on the facility code. | ||
| + | - Even if the error code value is the same, but the facility code is different | ||
| + | - Please note that it is treated as a separate error number. | ||
| + | |||
| + | </source> | ||
| + | |||
== 0x800f == | == 0x800f == | ||
Revision as of 11:54, 10 December 2019
format
bit 31: Whether there is an error
- 1= error(Bits 30-0 follow the definition below)
- 0= success(Definition of bits 30-0 is free)
bit 30: Error criticality (Critical)
- 1= Fatal error
- 0= Normal error
bit 29,28: Reserved
- 00= Always fixed to zero
bit 27-16: Facility
- 0x000= Reserved
- 0x001= SCE_ERROR_FACILITY_ERRNO
- 0x002= SCE_ERROR_FACILITY_KERNEL
bit 15-0: Error code
- The specific meaning depends on the facility code.
- Even if the error code value is the same, but the facility code is different
- Please note that it is treated as a separate error number.0x800f
These seem to be coming from various signature checks/crypto routines.
| Name | Hex | Error code | Remarks |
|---|---|---|---|
| SCE_SBL_ERROR_COMMON_ESTACK | 0x800f0029 | C1-6432-5 | sceSblAuthMgrLoadSelfSegmentForKernel / sceSblAuthMgrLoadSelfBlockForKernel: Returned after a failed sceSblAuthMgrAuthHeaderForKernel (?) |
| SCE_SBL_ERROR_SRTC_EINVAL | 0x800f0516 | C1-6703-6 | If modulemgr tried to decrypt the segment and decompress it, but an error occurred. Or an error coming from SceSblAuthMgr with low probability |
| SCE_SBL_ERROR_DEVACT_EINVAL | 0x800f0616 | C1-6761-0 | sceSblAuthMgrAuthHeaderForKernel: FW version mismatch (?) |
| SCE_SBL_ERROR_AUTHMGR_ENOTINITIALIZED | 0x800f0b32 | C1-7079-3 | sceSblAuthMgrAuthHeaderForKernel: Invalid PathId |