Hardware Timers

From Vita Development Wiki
Revision as of 11:24, 15 July 2022 by CreepNT (talk | contribs) (Change "fixed" to "configurable" for time interval, add frequency estimates, add WT5 config)
Jump to navigation Jump to search

The PSVita system embeds 8 Word timers (SceWT0 to SceWT7) and 6 Longrange timers (SceLT0 to SceLT5). The timers consist of a counter that gets incremented at a configurable time interval (multiple of a base frequency?), and can generate an interrupt when a certain value is reached.

Most timers are managed by SceSystimer.

Available timers

The Address column indicates the physical address at which the interface for a timer is located.

Each timer interface takes 0x1000 bytes.

List of timers
Name Address Interrupt ID Usage
SceLT0 / SceSystimerLongrangeTimer0 0xE20B1000 0x88 Available for SceSystimer
SceLT1 / SceSystimerLongrangeTimer1 0xE20B2000 0x89 Available for SceSystimer
SceLT2 / SceSystimerLongrangeTimer2 0xE20B3000 0x8A Available for SceSystimer
SceLT3 / SceSystimerLongrangeTimer3 0xE20B4000 0x8B Available for SceSystimer
SceLT4 / SceSystimerLongrangeTimer4 0xE20B5000 0x8C Available for SceSystimer
SceLT5 0xE20B6000 0x8D Used by SceKernelThreadMgr as CPU timer
SceWT0 / SceSystimerWordTimer0 0xE20B7000 0x80 Available for SceSystimer
SceWT1 / SceSystimerWordTimer1 0xE20B8000 0x81 Available for SceSystimer
SceWT2 / SceSystimerWordTimer2 0xE20B9000 0x82 Available for SceSystimer
SceWT3 / SceSystimerWordTimer3 0xE20BA000 0x83 Available for SceSystimer
SceWT4 / SceSystimerWordTimer4 0xE20BB000 0x84 Available for SceSystimer
SceWT5 / SceSystimerWordTimer5 0xE20BC000 0x85 Available for SceSystimer
SceWT6 / SceSystimerWordTimer6 0xE20BD000 0x86 Available for SceSystimer
SceWT7 / SceTimerForUsleep 0xE20BE000 0x87 Used by Tzs SceKernelIntrMgr for usleep - ?may be accessible in Secure state only?

Word Timers

Timers with 32-bit counters, unknown base frequency (seems to be in the order of ns).

typedef volatile _SceWordTimer {
    SceUInt32 unk0; // Value at which an interrupt is triggered?
    SceUInt32 current; // Current value of the timer's counter
    SceUInt32 cfg; // Configuration register
    SceUInt32 unkC; // Another counter?
    SceUInt32 unk10; // Unused?
    SceUInt32 unk14; // Interrupt status? Write 0x3 to clear pending IRQ?
} SceWordTimer;

Long Timers

Timers with 64-bit counters, unknown base frequency (seems to be in the order of ns). SceLT5 timer is incremented every microsecond (1MHz frequency).

typedef volatile _SceLongTimer {
    SceKernelSysClock current;  // Current value of the timer counter
    SceKernelSysClock unk8;  // Value at which an interrupt is triggered?
    SceKernelSysClock unk10; // Another counter?
    SceUInt32 unk18; // Interrupt status? Write 0x3 to clear pending IRQ?
    SceUInt32 cfg; // Configuration register
} SceLongTimer;

NOTE: on the PSVita CPU, 64-bit accesses are not guaranteed to be atomic. This can lead to issues when reading the timer if the low word of a counter is about to overflow. To ensure the readings from a timer are accurate, use code similar to the following code:

//Return value should hopefully be optimized into registers
SceKernelSysClock readCounter(volatile SceKernelSysClock* pTimerCounter) {
   SceKernelSysClock ctr;
   SceUInt32 ctrHi;
   do {
       ctr.hi = pTimeCounter->hi; //Read high word first
       ctr.lo = pTimeCounter->lo; //Read low word next
       ctrHi = pTimeCounter->hi;  //Read high word again to make sure no overflow happened
    } while (timerVal.hi != timerValHi); //Try again if high word changed while reading low word

    return ctr;
}

Configuration register

The configuration register bit mappings seems to be identical for Word and Long timers.

Known values
Timer Value Behaviour/notes
SceWT7 0xDD00000D ~1MHz frequency, interrupt fired when counter reached threshold
SceLT5 0x2F34500D 1MHz frequency, interrupt fired when counter reaches threshold
Configuration register bit mappings
Mask Effect Notes
0x00000001 Counting enable 0x0 = timer stopped, 0x1 = timer counting
0x0000000E ?
0x00000070 ? ?Mode select?
0x00000080 ?
0x00000700 ?
0x00000800 ? Unused?
0x0000F000 ?
0x000F0000 ?
0x00F00000 ? Related to frequency scaling
0xFF000000 ? Related to frequency scaling