SceOled

From Vita Development Wiki
Revision as of 22:23, 23 March 2022 by Devnoname120 (talk | contribs)
Jump to navigation Jump to search

Module

Version World Privilege
1.69-3.60 Non-secure Kernel

Libraries

Known NIDs

Version Name World Visibility NID
1.69 SceOledForDriver Non-secure Kernel 0x60C7478A

Resources

TODO: move to OLED.

PS Vita OLED models: - AMS495QA01 - Other models?

Types

enum SceOledError {
    SCE_OLED_ERROR_INVALID_BRIGHTNESS_VALUE = 0x803F0A02,
    SCE_OLED_ERROR_INVALID_READY_STATUS = 0x803F0A03,
    SCE_OLED_ERROR_NOT_READY = 0x803F0A04,
    SCE_OLED_ERROR_INTERNAL = 0x803F0A05
};

enum SceOledStatus {
    SCE_OLED_STATUS_NOT_READY = 0,
    SCE_OLED_STATUS_READY = 1,
    SCE_OLED_STATUS_ERROR = 2
};

struct SceOledCmd {
    unsigned char cmd,
    unsigned char size,
    unsigned char buf[size]
}

A cmd_queue is a contiguous array of SceOledCmd of different sizes. To get the next SceOledCmd of a queue, do:

struct SceOledCmd *cur_cmd = ...
struct SceOledCmd *next_cmd = &(cur_cmd->buf) + cur_cmd->size;

if (next_cmd->cmd == 0 || next_cmd->cmd == 255) {...} // End of queue

Available commands

Cmd Name Size Buf Description
0x6 GET_RED_CHANNEL 0x1 Unknown Unknown
0x7 GET_GREEN_CHANNEL 0x1 Unknown Unknown
0x8 GET_BLUE_CHANNEL 0x1 Unknown Unknown
0xA GET_POWER_MODE 0x1 Unknown Unknown
0xB GET_ADDRESS_MODE 0x1 Unknown Unknown
0xC GET_PIXEL_FORMAT 0x1 Unknown Unknown
0xD GET_DISPLAY_MODE 0x1 Unknown Unknown
0xF GET_DIAGNOSTIC_RESULT 0x1 Unknown Unknown
0x26 SET_GAMMA_CURVE 0x1 Unknown Unknown
0x36 SET_ADDRESS_MODE 0x1 Unknown Unknown
0x3A SET_PIXEL_FORMAT 0x1 Unknown Unknown
0xA1 READ_DDB_START 0x5 Unknown Unknown
0xB0 GLOBAL_PARAMETER 0x1 Unknown Unknown
0xB1 ELVSS_CON 0x3 Unknown Unknown
0xB2 TEMP_SWIRE 0x1 Unknown Unknown
0xB3 SCR_CONTROL 0x1 Unknown Unknown
0xB4 SCR_GAMMA 0x1 Unknown Unknown
0xB5 SCR_LUT 0x1 Unknown Unknown
0xC0 ACL_CONTROL 0x1 Unknown Unknown
0xC1 ACL_PROFILE 0x1C Unknown Unknown
0xC2 ACL1_DUTY 0x1 Unknown Unknown
0xC3 ACL1_ACWE 0x1 Unknown Unknown
0xC6 SET_DISPLAY_1 0xB Unknown Unknown
0xC7 SET_DISPLAY_2 0x1 Unknown Unknown
0xC8 SET_DISPLAY_3 0x1 Unknown Unknown
0xC9 SET_DISPLAY_4 0x3 Unknown Unknown
0xD0 SET_OTP1 0x1 Unknown Unknown
0xD1 SET_OTP2 0x1 Unknown Unknown
0xD2 SET_NORMAL_ADJUST_MTP 0x12 Unknown Unknown
0xD3 SET_DARK_ADJUST_MTP 0x12 Unknown Unknown
0xF0 PASSWD1 0x2 Unknown Unknown
0xF1 PASSWD2 0x2 Unknown Unknown
0xF3 MAIN_POWER_SEQUENCE 0x6 Unknown Unknown
0xF4 SET_POWER_CONTROL_1 0x3 Unknown Unknown
0xF5 SET_POWER_CONTROL_2 0x5 Unknown Unknown
0xF6 SET_DISPLAY_5 0x1 Unknown Unknown
0xF7 GTCON 0x1 Unknown Unknown
0xF8 SET_PANEL_CONTROL 0x13 Unknown Unknown
0xF9 SET_NORMAL_GAMMA_CONTROL 0x16 Unknown, for example <0x01, 0xCFBE9F9F, 0xCBC2C9D7, 0xDEE3E1BB, 0xFAD3D0D6, 0x002FE6ED, 0x2F> (Little-Endian) Change Brightness
0xFA SET_DARK_GAMMA_CONTROL 0x16 Unknown Unknown

SceOledForDriver

sceOledWaitReadyForDriver

Version NID
3.60 0x0CC6BCB4

Waits until the OLED has been initialized.

int sceOledWaitReadyForDriver(void);

SceOledForDriver_26F9EEA8_oled_disable

Version NID
3.60 0x26F9EEA8

Disables the OLED by clearing the GPIO bus 0 port 0.

int SceOledForDriver_26F9EEA8_oled_disable(void);

SceOledForDriver_2F0C4B67_send_cmd

Version NID
3.60 0x2F0C4B67

Sends a command to the OLED (via SPI).

int SceOledForDriver_2F0C4B67_send_cmd(u8 cmd, void *buffer, int size);

sceOledGetBrightnessForDriver

Version NID
3.60 0x43EF811A

Get the wide brightness value (0-65536).

int sceOledGetBrightnessForDriver(void);

sceOledDisplayOnForDriver

Version NID
3.60 0x4C7836C7
int sceOledDisplayOnForDriver(void);

sceOledGetDisplayColorSpaceModeForDriver

Version NID
3.60 0x4F8A1D4A
int sceOledGetDisplayColorSpaceModeForDriver(void);

SceOledForDriver_6B1E0B52_oled_enable

Version NID
3.60 0x6B1E0B52

Enables the OLED by setting the GPIO bus 0 port 0.

int SceOledForDriver_6B1E0B52_oled_enable(void);

SceOledForDriver_9F4ABDDC_get_status

Version NID
0.940-3.60 0x9F4ABDDC

Returns the OLED status by reading the GPIO bus 0 port 0.

int SceOledForDriver_9F4ABDDC_get_status(void);

sceOledDisplayOffForDriver

Version NID
3.60 0xBC84602E
int sceOledDisplayOffForDriver(void);

sceOledGetDDBForDriver

Version NID
3.60 0xC9D5987C

Returns the Device Descriptor Block (DDB), read with MIPI DSI command read_DDB_start (0xA1).

int sceOledGetDDBForDriver(unsigned short *supplier_id, unsigned short *supplier_elective_data);

sceOledSetDisplayColorSpaceModeForDriver

Version NID
3.60 0xDABBD9D3
int sceOledSetDisplayColorSpaceModeForDriver(int mode);

SceOledForDriver_E30604CC_dispatch_cmd_list

Version NID
3.60 0xE30604CC

Dispatches the OLED cmd list (using SceOledForDriver_2F0C4B67_send_cmd).

int SceOledForDriver_E30604CC_dispatch_cmd_list(void);

sceOledSetBrightnessForDriver

Version NID
3.60 0xF9624C47

Set the brightness (brightness needs to be in the range 0-65536). 0 means screen turned off, 1 means screen dimmed (like if you wait for a long time without touching your screen).

The brightness has actually 17 different values: 1 special value for brightness=0, and 16 different values for the rest (real_value=brightness/4096).

int sceOledSetBrightnessForDriver(SceUInt32 brightness);

SceOledForDriver_ED2D6F19_set_status

Version NID
0.940-3.60 0xED2D6F19

Used to enable or disable.

// status: 0: disable, 1: enable
int SceOledForDriver_ED2D6F19_set_status(int status);

SceOledForDriver_DDB1412B_reset

Version NID
0.940-3.60 0xDDB1412B

Used to reset.

int SceOledForDriver_DDB1412B_reset(void);

SceOledForDriver_3C990F53

Version NID
0.996 0x3C990F53
3.60 not present

Returns 0 on success.

int SceOledForDriver_3C990F53(void);