Boot Sequence

The Vita main application processor is a Cortex A9 MPcore. It implements ARM TrustZone for execution in both a non-secure world and a sandboxed Secure World.

Boot Process

Boot ROM

It is likely that the F00D processor (MeP Core) is the actual secure boot device rather than the ARM CPU. The F00D processor is Toshiba MEP based and is the first secure device ("first loader") to start on the Vita. Once it starts it likely maps the eMMC and directly reads in the second_loader.enp or second_loader.enp_ from the eMMC slb2 partition. This is in the native load format of the F00D bootrom. There are likely 2 layers of encryption. First it decrypts the per-console layer that was added during the install. After that it will decrypt the factory-encrypted layer then begin execution.

The second_loader is primarily responsible for preparing the ARM processor. It initializes DRAM and decrypts slb2 kernel_boot_loader.self into DRAM. It also writes the ARM exception vector and some boot context information to the 32KB scratch buffer (mirror mapped to 0x00000000 on ARM). kernel_boot_loader.self contains both the secure world kernel bootloader and secure kernel, as well as the non-secure kernel boot loader. At this point the slb2 kprx_auth_sm.self and prog_rvk.srvk are both loaded into DRAM.

Finally, the second_loader resets itself with a pointer to the secure_kernel.enp or enp_. F00D processor then restarts and loads the secure_kernel.enp in and again decrypts the per-console layer that was added by the install, and the factory layer. At this point the F00D processor secure kernel is prepared and it resets the ARM CPU at 0x00000000 (F00D scratch buffer). This triggers the ARM secure boot process to begin.

Secure Kernel

The bootloader decompresses the ARZL secure kernel, loads it and sets up the VBAR and MVBAR. It then decompresses the ARZL non-secure kernel bootloader and sets NS in SCR and jumps into non-secure kernel bootloader. See Secure Bootloader for more information.

SceKblForKernel

The non-secure kernel bootloader contains an embedded and likely stripped version of SceSysmem, SceKernelModulemgr, SceSblSmschedProxy, and some other core drivers. The NS KBL sets up the eMMC device (again) and starts os0:psp2bootconfig.skprx.

ScePsp2BootConfig

This kernel module does not export any library. It only has a module init function that has a hard coded list of core kernel modules (ex: sysmem.skprx) which are loaded with calls back into NSKBL through SceKblForKernel imports. Once the core initialization is done, the next module to run is SceSysStateMgr.

SceSysStateMgr

This kernel module also does not export any library. Its init function first maps all the SceKernelBootimage embedded modules and redirects them to os0:kd/. Then it decrypts os0:psp2config.skprx or os0:psp2config_vita.skprx or os0:psp2config_dolce.skprx and parses the System Configuration Script to load the remaining modules and finally either SceSafemode or SceShell or ScePsp2Swu or ScePsp2Diag.

Boot Partition

The boot partition is SLB2 formatted. It contains entries these files:

Name	Earliest Known Version	Comments
kernel_boot_loader.self	1.05	Secure KBL and ARZL compressed non-secure KBL
kprx_auth_sm.self	1.05	Used with F00D Processor to decrypt SELFs
prog_rvk.srvk	1.05	SCE encrypted revocation data of some sort
second_loader.enp	1.05	Possibly the secure bootloader
second_loader.enp_	1.69	Related to second_loader.enp in some way, likely for encryption
secure_kernel.enp	1.05	Possibly the secure kernel ARZL compressed and loaded into memory by ROM
secure_kernel.enp_	1.05	Related to secure_kernel.enp in some way, likely for encryption

System Configuration Script

os0:psp2config.skprx once decrypted is a UTF-8 text file that is parsed by SceSysStateMgr. It is a very simple script format.

If "manufacturing mode" is enabled, then it is possible to load psp2config.skprx from sd0: (not present in any production device or devkits) or ux0:. However, the files must still be signed and encrypted SELFs. In "manufacturing mode" with the default boot config, if sd0:psp2diag.self or ux0:psp2diag.self exists (and is a valid signed & encrypted SELF), then it will be launched. If "development mode" is enabled (note that this does not necessarily mean PDEL or devkit), then psp2config.skprx can be a plaintext file instead.

Comments

Comments start out with #, as an example, here's the header of 1.69 psp2config.skprx

#
# PSP2 System Configuration for Release
#
# [NOTICE]
# 
# This configuration is only for kernel_boot_loader_release.self.
#

Conditionals

Conditionals start with if and end with endif. There are certain conditional constants defined in SceSysStateMgr. A table of known conditionals is below.

Name	Description
MANUFACTURING_MODE	Unknown. Depends on some condition set on boot by some bootloader
EXTERNAL_BOOT_MODE	Unknown. Depends on some condition set on boot by some bootloader
UPDATE_MODE	Set by Syscon when an update is about to be performed.
USB_ENUM_WAKEUP	Unknown. Could be CMA connection while device is turned off or IDU mode USB boot.
KERMIT_REV_ES1_X	Unknown. GPU hardware revision related.
KERMIT_REV_ES2_X	Unknown. GPU hardware revision related.
KERMIT_REV_ES3_X	Unknown. GPU hardware revision related.
KERMIT_REV_ES4_X	Unknown. GPU hardware revision related.
UD0_EXIST	Does the ud0: Partition exist?
DEMO_MODE	Is the Vita a IDU/ShowMode flagged?
SAFE_MODE	A flag in sysroot buffer indicates device should enter safe mode.
DEVELOPMENT_MODE	SceSblACMgr is called to check if device is a development device and is in DevMode.

Example:

if SAFE_MODE
spawn	os0:ue/safemode.self
end
endif

Load

load path will load the kernel module at path.

tload path possibly stands for "test load." Possibly used in development units to load to module to dedicated devkit RAM.

Example:

load	os0:kd/ngs.skprx

Spawn

spawn path will spawn an app and continue processing the script in the background.

spawnwait path will spawn an app and wait for it to exit before continuing processing the script.

appspawn path param is used to spawn vs0:vsh/shell/shell.self. Specify a paramater to pass.

Known param constants:

Name	Description
SHELL_BUDGET_ID	Unknown.

Example:

if UPDATE_MODE
if UD0_EXIST
spawn ud0:PSP2UPDATE/psp2swu.self
else
spawn ur0:PSP2UPDATE/psp2swu.self
endif
end
endif

Include

include path will include and process a config script located at path.

Example:

include	ur0:temp/bcfg2.txt

End

end will end script processing

Ignore Error

Any line that starts with - will not fail the boot sequence if the line fails. For example, you can specify an optional module to load such that boot continues if the module does not exist or errors on load.

All codes (from 0.990)

load, unload, loadonly, start, stop, unloadonly, spawn, spawnwait, wait, kill, loadconfig, ifmodel, ifnmodel, setenv, setmodfile, repeat, endrepeat, appspawn, tload

+ include, if, endif, end

Boot Debug Checkpoint Codes

During the boot sequence, the various bootloaders will update a GPIO register specifying the progress into boot. This can be used to debug where in the boot process something fails.

GPIO

The GPIO registers are registered at 0xE20A000C (turn off bits) and 0xE20A0008 (turn on bits). On PDEL units, this maps to the LED lights.

Known Codes

Code	Location	Description
72	?	?
84	?	?
85	?	?
86	?	?
96	?	?
129	Secure Kernel Loader	Core 0 (secure world) pre-init complete
130	Secure Kernel Loader	Secure world interrupts registered (?)
131	Secure Kernel Loader	Serial console ready, boot message printed
132	Secure Kernel Loader	Some device init
133	Secure Kernel Loader	Some co-processor init. Starting point for other cores.
134	Secure Kernel Loader	MMU enabled, VBAR/MVBAR set up
135	Secure Kernel Loader	Nothing since 134
136	Secure Kernel Loader	Boot setup complete, secure kernel loading begin
137	Secure Kernel Loader	Secure kernel loaded. About to load NS KBL at 0x51000000
138	Secure Kernel Loader	Secure kernel loaded. About to resume context at 0x1F000000. Or undefined instruction exception.
139	Secure Kernel Loader	SVC exception (should not happen, error)
140	Secure Kernel Loader	Prefetch abort exception
141	Secure Kernel Loader	Data abort exception
142	Secure Kernel Loader	IRQ exception (should not happen, error)
143	Secure Kernel Loader	FIQ exception (should not happen, error)
161	NS Kernel Loader	Core 0 (non-secure world) pre-init complete
162	NS Kernel Loader	Some interrupts registered (?)
163	NS Kernel Loader	Serial console ready, boot message printed (if enabled)
164	NS Kernel Loader	Some buffer is initialized to device addresses
165	NS Kernel Loader	Some co-processor init. Starting point for other cores.
166	NS Kernel Loader	MMU enabled, VBAR set up
167	NS Kernel Loader	Nothing since 166
168	NS Kernel Loader	Boot setup complete, NS kernel loading begin
169	NS Kernel Loader	Kernel pre-init (setup stacks, interrupts, etc) done. Right before first external loading.
170	NS Kernel Loader	Undefined instruction exception
171	NS Kernel Loader	SVC exception (should not happen, error)
172	NS Kernel Loader	Prefetch abort exception
173	NS Kernel Loader	Data abort exception
174	NS Kernel Loader	IRQ exception (should not happen, error)
175	NS Kernel Loader	FIQ exception (should not happen, error)

Suspend and Resume

Upon suspension, context is written to memory and a syscon command is issued to save the context pointer as well as other information (for example, if it should restart into update mode). When resuming, the boot process is the same as cold boot up until the secure kernel bootloader. After secure kernel loads, instead of decompressing and jumping to the non-secure kernel bootloader, it restores the saved context and returns to the kernel resume code.

See Suspend.