GPIO Registers: Difference between revisions
Jump to navigation
Jump to search
Line 99: | Line 99: | ||
|- | |- | ||
| 16 | | 16 | ||
| | | GPO 0 | ||
|- | |- | ||
| 17 | | 17 | ||
| | | GPO 1 | ||
|- | |- | ||
| 18 | | 18 | ||
| | | GPO 2 | ||
|- | |- | ||
| 19 | | 19 | ||
| | | GPO 3 | ||
|- | |- | ||
| 20 | | 20 | ||
| | | GPO 4 | ||
|- | |- | ||
| 21 | | 21 | ||
| | | GPO 5 | ||
|- | |- | ||
| 22 | | 22 | ||
| | | GPO 6 | ||
|- | |- | ||
| 23 | | 23 | ||
| | | GPO 7 | ||
|- | |- | ||
| 24 | | 24 |
Revision as of 14:37, 10 August 2019
MMIO Interfaces
Name | Physical address |
---|---|
SceGpio0Reg | 0xE20A0000 |
SceGpio1Reg | 0xE0100000 |
Registers
Offset | Size | Description |
---|---|---|
0x00 | 4 | Port mode (1=out, 0=in) (1 bit each port) |
0x04 | 4 | Port read (1=low, 0=high?) (1 bit each port) |
0x08 | 4 | Port set (1 bit each port) |
0x0C | 4 | Port clear (1 bit each port) |
0x14 | 4 | Interrupt mode (2 bits) for interrupts 0-15 |
0x18 | 4 | Interrupt mode (2 bits) for interrupts 16-31 |
0x34 | 4 | Port read latched? (1=low, 0=high?) (1 bit each port) |
It looks like +0x10,+0x14,+0x18,+0x1C,+0x20 are related to interrupt enable, and +0x38,+0x3C,+0x40,+0x44,+0x48 to interrupt ack.
GPIO Bus 0 ports
Port | Description |
---|---|
0 | OLED/LCD |
1 | unk |
2 | unk |
3 | Syscon related (output) |
4 | Syscon related (input) |
5 | UDCD (USB Device Controller Driver) related |
6 | Game card LED |
7 | PS Button Blue LED |
8 | unk |
9 | Camera |
12 | UDCD (USB Device Controller Driver) related |
13 | HDMI related (input) |
14 | unk |
15 | HDMI related (output) |
16 | GPO 0 |
17 | GPO 1 |
18 | GPO 2 |
19 | GPO 3 |
20 | GPO 4 |
21 | GPO 5 |
22 | GPO 6 |
23 | GPO 7 |
24 | UDCD (USB Device Controller Driver) related |
25 | unk |
26 | unk |
27 | Motion related |
28 | Motion related |
29 | unk |
30 | 3G Modem related |
31 | unk |