SPI Registers: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
 
(12 intermediate revisions by the same user not shown)
Line 11: Line 11:
| 0xE0A10000
| 0xE0A10000
|-
|-
| SceSpi2Reg (SceOled)
| SceSpi2Reg (SceOled, SceLcd)
| 0xE0A20000
| 0xE0A20000
|}
|}
Line 20: Line 20:
! Offset
! Offset
! Size
! Size
! Name
! Description
! Description
|-
| 0x00
| 4
| SPI_RXFIFO
| Read FIFO
|-
|-
| 0x04
| 0x04
| 4
| 4
| FIFO
| SPI_TXFIFO
| Write FIFO
|-
| 0x08
| 4
| SPI_CTL
| Configuration
|-
| 0x0C
| 4
| SPI_INTCTL
| Interrupt control?
|-
|-
| 0x10
| 0x10
| 4
| 4
| SPI_STATUS
| Start transfer (write 0b1), cancel transfer(write 0b0), transfer busy (reads bit0 = 0)?
| Start transfer (write 0b1), cancel transfer(write 0b0), transfer busy (reads bit0 = 0)?
|-
| 0x14
| 4
| SPI_DMACTL
| ??
|-
|-
| 0x18
| 0x18
| 4
| 4
| ??
| Start transfer (bit 0 or 1), transfer direction (bit 0 or 1)?
| Start transfer (bit 0 or 1), transfer direction (bit 0 or 1)?
|-
| 0x20
| 4
| ??
|
|-
|-
| 0x24
| 0x24
| 4
| 4
| Flags?
| SPI_INT_STATUS
| Interrupt status/clear. Bit[9] = RX FIFO not empty interrupt.
|-
|-
| 0x28
| 0x28
| 4
| 4
| Number of available bytes to read from the FIFO
| SPI_RXFIFO_STATUS
| Number of available bytes to read from the RX FIFO
|-
|-
| 0x2C
| 0x2C
| 4
| 4
| Transfer length?
| SPI_TXFIFO_STATUS
| Number of pending bytes in the write the TX FIFO (maximum = 0x7F)
|}
|}
== Notes ==
Registers seem to be very similar to https://github.com/torvalds/linux/blob/master/drivers/spi/spi-sun4i.c

Latest revision as of 13:56, 29 May 2021

MMIO Interfaces

Name Physical address
SceSpi0Reg (SceSyscon) 0xE0A00000
SceSpi1Reg (SceMotionDev) 0xE0A10000
SceSpi2Reg (SceOled, SceLcd) 0xE0A20000

Registers

Offset Size Name Description
0x00 4 SPI_RXFIFO Read FIFO
0x04 4 SPI_TXFIFO Write FIFO
0x08 4 SPI_CTL Configuration
0x0C 4 SPI_INTCTL Interrupt control?
0x10 4 SPI_STATUS Start transfer (write 0b1), cancel transfer(write 0b0), transfer busy (reads bit0 = 0)?
0x14 4 SPI_DMACTL ??
0x18 4 ?? Start transfer (bit 0 or 1), transfer direction (bit 0 or 1)?
0x20 4 ??
0x24 4 SPI_INT_STATUS Interrupt status/clear. Bit[9] = RX FIFO not empty interrupt.
0x28 4 SPI_RXFIFO_STATUS Number of available bytes to read from the RX FIFO
0x2C 4 SPI_TXFIFO_STATUS Number of pending bytes in the write the TX FIFO (maximum = 0x7F)

Notes

Registers seem to be very similar to https://github.com/torvalds/linux/blob/master/drivers/spi/spi-sun4i.c