SceSyscon: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 3,214: Line 3,214:
| 0
| 0
| 0x058941D7
| 0x058941D7
| Probably a control command. Sends 2 bytes to Syscon.
| sceSysconOutputClockForDriver. Sends 2 bytes to Syscon.
|-
|-
| 0xB1
| 0xB1

Revision as of 19:00, 27 December 2023

System Controller.

Module

Version World Privilege
0.931.010-3.740.011 Non-secure Kernel

Libraries

Known NIDs

Version Name World Visibility NID
0.931.010-3.740.011 SceSysconForDriver Non-secure Kernel 0x60A35F64

Types

#define SCE_KERNEL_ERROR_SYSCON_ERROR     0x80250000
#define SCE_SYSCON_ERROR_INVALID_SIZE     0x80250001
#define SCE_SYSCON_ERROR_INVALID_ARGUMENT 0x80250002
#define SCE_SYSCON_ERROR_INVALID_POINTER  0x80250003
#define SCE_SYSCON_ERROR_INVALID_STATUS   0x80250004
#define SCE_SYSCON_ERROR_NOT_INTR_ALLOWED 0x80250005
#define SCE_SYSCON_ERROR_TX_SIZE_TOO_LONG 0x80250006

#define SCE_SYSCON_ERROR_ILLEGAL_SIZE     0x80250100
#define SCE_SYSCON_ERROR_ILLEGAL_STATUS   0x80250101
#define SCE_SYSCON_ERROR_NOEXEC           0x80250102
#define SCE_SYSCON_ERROR_INVALID_FLAGS    0x80250105

// Syscon error codes are gotten with 0x80250200 | rx[3], where rx is the data returned by Syscon

typedef struct SceSysconPacket { // size is 0x80
	struct SceSysconPacket *next;
	SceUInt32 status;		// Lower 16 bits contain flags
	SceUID semaId;
	SceUInt32 index;		// Out: returns to which packet list the packet was inserted into
	SceUInt8 tx[32];		// tx[0..1] = cmd, tx[2] = size i.e. sizeof(actual_data)+1, rx[3..31] = actual_data
	SceUInt8 rx[32];		// rx[0..1] = cmd, rx[2] = size i.e. sizeof(actual_data)+2, rx[3] = error_code, rx[4..31] = actual_data
	void *tx_extra;
	void *rx_extra;
	SceSize rx_extra_size;
	SceUInt32 rx_offset;
	int (*callback)(SceSysconPacket *packet, void *argp);
	void *argp;
	SceUInt32 time;
	SceUInt32 unk[5];
} SceSysconPacket;

typedef enum SceSysconControl {
	SCE_SYSCON_CTRL_UP        = 0x1,
	SCE_SYSCON_CTRL_RIGHT     = 0x2,
	SCE_SYSCON_CTRL_DOWN      = 0x4,
	SCE_SYSCON_CTRL_LEFT      = 0x8,
	SCE_SYSCON_CTRL_TRIANGLE  = 0x10,
	SCE_SYSCON_CTRL_CIRCLE    = 0x20,
	SCE_SYSCON_CTRL_CROSS     = 0x40,
	SCE_SYSCON_CTRL_SQUARE    = 0x80,
	SCE_SYSCON_CTRL_SELECT    = 0x100,
	SCE_SYSCON_CTRL_LTRIGGER  = 0x200,
	SCE_SYSCON_CTRL_RTRIGGER  = 0x400,
	SCE_SYSCON_CTRL_START     = 0x800,
	SCE_SYSCON_CTRL_PSBUTTON  = 0x1000,
	SCE_SYSCON_CTRL_POWER     = 0x4000,
	SCE_SYSCON_CTRL_VOLUP     = 0x10000,
	SCE_SYSCON_CTRL_VOLDOWN   = 0x20000,
	SCE_SYSCON_CTRL_HEADPHONE = 0x8000000
} SceSysconControl;

Flags (passed to sceSysconCmdExecForDriver, etc), also lower bits of status:

Flags Meaning
0x1 Some kind of priority that helps to select to which packet list the packet is inserted into.
0x100 Do not insert packet checksum (at tx_buf[2 + len]), where len = tx_buf[2]. And don't memset the rest of the buffer to -1 (memset(tx_buf + len + 3, -1, 29 - len)) if len < 29.
0x400 When set, use rx_extra to receive the data. rx_extra_size must be greater than 32.
0x800 When set, use tx_extra instead of tx for sending data. The size is contained in tx_extra[2] and must be smaller or equal to 253. When cleared: use tx and the size is contained in tx[2], which has to be smaller or equal 29.

SceSysconForDriver

sceSysconErnieShutdownForDriver

Version NID
0.931.010-3.740.011 0x94AB13CC 
#define ERNIE_SHUTDOWN_SHUTDOWN 0
#define ERNIE_SHUTDOWN_REBOOT 1

int sceSysconErnieShutdownForDriver(int mode);

sceSysconPowerCtrlKermitResetForDriver

Version NID
0.931.010-3.740.011 0x14B99945

Executes SMC 0x11A: return sceSysconSetPowerMode(2, 0); 

int sceSysconPowerCtrlKermitResetForDriver(void);

sceSysconBatterySWResetForDriver

Version NID
0.931.010-3.740.011 0x87DA378D

If Syscon version <= 0x70503, it does nothing and returns error 0x8025023F. 

int sceSysconBatterySWResetForDriver(void);

sceSysconGetBatteryFullCapacityForDriver

Version NID
0.931.010 not present
0.990.000-3.740.011 0xF93CF833

Used in ScePower's module_start. 

int sceSysconGetBatteryFullCapacityForDriver(void *pResult);

sceSysconGetBatteryCycleCountForDriver

Version NID
0.931.010 not present
0.996.090-3.740.011 0xCD73079D

Used in ScePower. 

int sceSysconGetBatteryCycleCountForDriver(void *pRedsult);

sceSysconBatteryStartBLModeForDriver

Version NID
0.931.010-3.740.011 0x2CEF078E 
int sceSysconBatteryStartBLModeForDriver(void);

sceSysconBatteryStopBLModeForDriver

Version NID
0.931.010-3.740.011 0xE4AE7852 
int sceSysconBatteryStopBLModeForDriver(void);

sceSysconBatterySetBLCommandForDriver

Version NID
0.931.010-3.740.011 0xE4F29744

BL command (1 byte at most) must be contained in either unk_byte or pSrc. 

int sceSysconBatterySetBLCommandForDriver(SceUInt16 ctx, SceUInt8 unk_byte, void *pSrc, SceUInt8 size);

sceSysconBatteryExecBLCommandForDriver

Version NID
0.931.010-3.740.011 0x74B2AB55 
int sceSysconBatteryExecBLCommandForDriver(SceUInt16 ctx);

sceSysconBatteryReadBLCommandForDriver

Version NID
0.931.010-3.740.011 0x448DAFF1 
// size must be between 0 and 0x10
int sceSysconBatteryReadBLCommandForDriver(SceUInt16 ctx, SceUInt8 unk1, SceUInt8 unk2, void *pDst, SceUInt8 size);

sceSysconReadBatteryRegForDriver

Version NID
0.990.000-3.740.011 0xC2FB5565

This is a guessed name.

sceSysconGetManualChargeModeForDriver

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0x4FEC564C 
int sceSysconGetManualChargeModeForDriver(int *piMode);

sceSysconCtrlManualChargeModeForDriver

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0xC6A2C9EF 
int sceSysconCtrlManualChargeModeForDriver(int mode);

sceSysconGetLogInfoForDriver

Version NID
0.931.010-0.940 not present
0.990.000-3.740.011 0x701535FC 
typedef struct SceSysconLogInfo { // size is 8 on FW 3.600.011
   uint8_t unk_0[8];
} SceSysconLogInfo;

int sceSysconGetLogInfoForDriver(SceSysconLogInfo *pInfo);

sceSysconLogStartForDriver

Version NID
0.931.010-0.940 not present
0.990.000-3.740.011 0x4E55CF5E 
int sceSysconLogStartForDriver(void);

sceSysconLogStartWaitingForDriver

Version NID
0.931.010-2.12 not present
2.500.071-3.740.011 0x9C0B1E61 
int sceSysconLogStartWaitingForDriver(void);

sceSysconLogReadDataForDriver

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0x487D97F3 
int sceSysconLogReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);

sceSysconGetTemperatureLogForDriver

Version NID
0.931.010-2.12 not present
2.500.071-3.740.011 0x3B354824

sceSysconClearTemperatureLogForDriver

Version NID
0.931.010-2.12 not present
2.500.071-3.740.011 0x3843D657

sceSysconGetUsbDetStatusForDriver

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0xEF810687

sceSysconCtrlDolceLEDForDriver

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0x727F985A

This is a guessed name. 

#define STATE_ON 0
#define STATE_BLINK_SLOW 1
#define STATE_BLINK_FAST 2

int sceSysconCtrlDolceLEDForDriver(SceUInt32 state);

sceSysconGetTimeStampForDriver

Version NID
0.931.010-3.740.011 0x4D588A0A

This is a guessed named, derived from PSP. Temp name was sceSysconGetBaryonTimestampForDriver.

Returns the timestamp of latest installed Syscon firmware patch, formatted as YYYYMMDDhhmm. This comes from a string stored in Syscon firmware under another format: $Date:: YYYY-MM-DD hh:mm:ss +0900#$

Example: $Date:: 2013-12-13 15:52:05 +0900#$ in Syscon firmware becomes 201312131552 in Syscon command 2. 

// pTimestamp will point to a buffer of size 0x10 bytes, containing a string of size 13 (12: length + 1: terminal character)
int sceSysconGetTimeStampForDriver(char *pTimestamp);

sceSysconGetWakeupFactorForDriver

Version NID
0.931.010-3.740.011 0xCF5B2F2F

Result is 2 bytes wakeup factor coming from Syscon command 0x10. 

int sceSysconGetWakeupFactorForDriver(SceUInt32 *pWakeupFactor);

sceSysconCtrlHdmiCecPowerForDriver

Version NID
0.931.010-3.740.011 0x62155962

If Syscon version is strictly lower than 0x40000, it does nothing and returns 0.

Sets the pin CDC Hot Plug Detect (HPD) state of the HDMI bridge (AD80244 / ADV7533). 

int sceSysconCtrlHdmiCecPowerForDriver(SceBool enable_HDMI_CDC_HPD_pin);

sceSysconCtrlMotionSensorPowerForDriver

Version NID
0.931.010-3.740.011 0x063425AE

This is a guessed name.

If Syscon version is strictly lower than 0x40000, it does nothing and returns 0. 

int sceSysconCtrlMotionSensorPowerForDriver(SceBool enable);

SceSysconForDriver_3FDD29D6

Version NID
0.931.010-3.740.011 0x3FDD29D6 
int SceSysconForDriver_3FDD29D6(int a1, SceBool use_flag);

sceSysconCtrlVoltageForDriver

Version NID
0.920.050-3.740.011 0x7F198FA2

Temp name was sceSysconSetVoltageForDriver.

Used in ScePower. 

/*
type:
0: Reserved
1: DD1 (VDD - IFTU, DMAC, Internal bus, SPM 32KiB/128KiB) SetSysClockFrequency, SetDmac5ClockFrequency, SetBusClockFrequency, SetCameraBusClockFrequency
2: DD2 (VDDA - ARM core, L2 cache) SetArmClockFrequency
3: DD3 (VDDC - Codec Engine, AVC Decoder) SetVipClockFrequency, SetVeneziaClockFrequency
4: DD4 (VDDG - GPU core) SetGpuClockFrequencyInternal, SetGpuXbarClockFrequency, SetCompatClockFrequency

vid:
0x22 (0.34V)
0x8A (1.38V) - (something got from ScePervasiveForDriver)
*/

#define SCE_SYSCON_VOLTAGE_DD1 (1)
#define SCE_SYSCON_VOLTAGE_DD2 (2)
#define SCE_SYSCON_VOLTAGE_DD3 (3)
#define SCE_SYSCON_VOLTAGE_DD4 (4)

int sceSysconCtrlVoltageForDriver(SceUInt32 type, SceUInt32 vid);

sceSysconSetPowerModeForDriver

Version NID
0.931.010-3.740.011 0x8A95D35C

Temp name was sceSysconResetDeviceForDriver. 

int sceSysconSetPowerModeForDriver(int type, int mode);

It issues SMC #0 with r12 = 0x11A.

The mode argument is usually set to 0x2 or sometimes 0x8002 (which seems to correspond to some request by the UDC and BT drivers).

The type argument determines what to do.

Real definition names are like: "SCE_SYSCON_POWERMODE_MODE_STANDBY".

Type Description Syscon command
0 Power off {0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
1 Suspend (low-power state) {0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
2 Cold reset {0x01, 8, 1, 0}
3 ?Reset to update mode? {0xC1, 0, 2, 0}
4 ?Reset to update mode? {0xC1, 0, 2, 1}
5 Hibernate {0xC2, 0, 2, 0x5A}
16 ?? {0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
17 Resume (soft reset: suspend and immediately resume) {0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}

sceSysconEnableHibernateIOForDriver

Version NID
0.931.010-0.940 not present
0.990.000-3.740.011 0x4946538A 
int sceSysconEnableHibernateIOForDriver(int a1);

sceSysconWaitReadyForDriver

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0x55DF1C9B

Temp name was sceSysconWaitInitializedForDriver. 

int sceSysconWaitReadyForDriver(void);

sceSysconCmdSyncForDriver

Version NID
0.931.010-3.740.011 0x6E517D22 
int sceSysconCmdSyncForDriver(SceSysconPacket *packet, int noWait);

sceSysconCmdExecForDriver

Version NID
0.931.010-3.740.011 0x9ADDCA4A 
int sceSysconCmdExecForDriver(SceSysconPacket *packet, unsigned int flags);

sceSysconCmdExecAsyncForDriver

Version NID
0.931.010-3.740.011 0xC2224E82 
int sceSysconCmdExecAsyncForDriver(SceSysconPacket *packet, u32 flags, int (*callback)(SceSysconPacket *, void *), void *argp);

sceSysconCtrlSdPowerForDriver

Version NID
0.931.010-3.740.011 0xBE1ADE4F

If Syscon version is strictly lower than 0x40000, it does nothing and returns 0. Calls Syscon command 0x888.

Enables/disables GameCard reader.

Used in SceSdstor. 

// param: 1 = enable SD (GameCard reader) power, 0 = disable SD (GameCard reader) power
int sceSysconCtrlSdPowerForDriver(SceUInt16 param);

sceSysconCtrlWirelessPowerForDriver

Version NID
0.931.010-0.995.000 0x4FBDA504
0.996.090-3.740.011 not present

If Syscon version is strictly lower than 0x40000, it does nothing and returns 0. Calls Syscon command 0x88A.

Replaced by function #sceSysconCtrlWirelessPower2ForDriver. 

int sceSysconCtrlWirelessPowerForDriver(SceUInt16 param);

sceSysconCtrlWirelessPower2ForDriver

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0xA2E85DB9

Replacement function for #sceSysconCtrlWirelessPowerForDriver. Calls Syscon command 0x88A. 

int sceSysconCtrlWirelessPower2ForDriver(SceUInt16 param);

sceSysconCtrlWirelessPowerDownForDriver

Version NID
0.931.010-0.995.000 0xDF8C6D2D
0.996.090-3.740.011 not present

If motherboard is not "hardware info third byte 0x10" (probably IRS-001), it does nothing and returns 0, probably because missing hardware. Calls Syscon command 0xB1. Wireless power down might be a button to enable/disable Wireless, like on PSP. 

int sceSysconCtrlWirelessPowerDownForDriver(SceUInt16 param);

sceSysconGetConfigStorageInfoForDriver

Version NID
0.995.000-3.740.011 0xCE48E8EB

Get Syscon Config Storage Info using Syscon command 0x1300. 

typedef struct SceKernelConfigStorageInfo { // size is 8 bytes
    SceUInt16 version;
    SceUInt16 unk_2;
    SceUInt32 unk_4;
} SceKernelConfigStorageInfo;

int sceSysconGetConfigStorageInfoForDriver(SceKernelConfigStorageInfo *pInfo);

sceSysconVerifyConfigstorageScriptForDriver

Version NID
0.931.010-0.990.000 not present
0.995.000-3.740.011 0xCC6F90A8

This function is not used in the OS and anyway it would always return error because it calls a command that is not implemented in Syscon FW. 

int sceSysconVerifyConfigstorageScriptForDriver(int a1, void *pScript, SceSize size);

sceSysconLoadConfigstorageScriptForDriver

Version NID
0.931.010-0.990.000 not present
0.995.000-3.740.011 0x89C5CFD6

The OS uses this function to change between modes: IDU mode, Show Mode, no mode. This works by spoofing or rewriting Hardware Info. This is reboot persistent. 

int sceSysconLoadConfigstorageScriptForDriver(int a1, void *pScript, SceSize size);

sceSysconBeginConfigstorageTransactionForDriver

Version NID
0.931.010 not present
0.990.000-3.740.011 0xA4968B8C 
int sceSysconBeginConfigstorageTransactionForDriver(void);

sceSysconCommitConfigstorageTransactionForDriver

Version NID
0.931.010 not present
0.990.000-3.740.011 0x7B9B3617 
int sceSysconCommitConfigstorageTransactionForDriver(void);

sceSysconEndConfigstorageTransactionForDriver

Version NID
0.931.010 not present
0.990.000-3.740.011 0xFCC3E8EE 
int sceSysconEndConfigstorageTransactionForDriver(void);

sceSysconSetDebugHandlersForDriver

Version NID
0.931.010-3.740.011 0xF245CD6F 
/** A set of debug handlers for syscon, that you can set in sceSysconSetDebugHandlersForDriver(). */
typedef struct SceSysconDebugHandlers {
    /** Structure size (probably, unused). */
    s32 size;
    /** Callback ran right before running a packet, with a pointer to it passed as the first argument. */
    void (*start)(SceSysconPacket *packet);
    /** Callback ran right after finishing running a packet, with a pointer to it passed as the first argument. */
    void (*end)(SceSysconPacket *packet);
} SceSysconDebugHandlers;

int sceSysconSetDebugHandlersForDriver(SceSysconDebugHandlers *debug_handlers);

sceSysconGetBatteryCalibDataForDriver

Version NID
0.931.010-3.36 not present
3.500.011-3.740.011 0x9ADC9936 
int sceSysconGetBatteryCalibDataForDriver(int *piData1, int *piData2, int *piData3, int *piData4);

sceSysconGetTouchpanelDeviceInfoForDriver

Version NID
0.931.010-3.740.011 0xF492E69E 
typedef struct SceKernelTouchpanelDeviceInfo { // size is 8 bytes
  uint16_t FrontVendorID;
  uint16_t FrontFirmwareRev;
  uint16_t RearVendorID;
  uint16_t RearFirmwareRev;
} SceKernelTouchpanelDeviceInfo;

int sceSysconGetTouchpanelDeviceInfoForDriver(SceKernelTouchpanelDeviceInfo *pInfo);

sceSysconGetTouchpanelDeviceInfo2ForDriver

Version NID
0.931.010-1.50 not present
1.690.011-3.740.011 0x030D447F

This is a guessed name.

Returns extended touchpanel info. 

// this is a guessed name
typedef struct SceKernelTouchpanelInfo { // size is 0xA bytes
	SceUInt16 vendorID;
	SceUInt16 firmwareRev;
	SceUInt16 configRev;
	SceUInt8 hwVersion;
	SceUInt8 vendorInfo;
	SceUInt16 reserved;
} SceKernelTouchpanelInfo;

// this is a guessed name
typedef struct SceKernelTouchpanelDeviceInfo2 { // size is 0x14 bytes
	SceKernelTouchpanelInfo front;
	SceKernelTouchpanelInfo rear;
} SceKernelTouchpanelDeviceInfo2;

int sceSysconGetTouchpanelDeviceInfo2ForDriver(SceKernelTouchpanelDeviceInfo2 *pInfo);

sceSysconMotionGetDeviceInfoForDriver

Version NID
0.931.010-3.740.011 0xD01E64FC

This is a guessed name.

Returns motion sensor device info. See SceMotionDev#sceMotionDevGetDeviceInfoForDriver to reverse the pInfo structure. 

int sceSysconMotionGetDeviceInfoForDriver(void *pInfo);

sceSysconGetHardwareInfoForDriver

Version NID
0.931.010-3.740.011 0xCBD6D8BC

Returns Hardware Info obtained from Syscon command 0x5. 

int sceSysconGetHardwareInfoForDriver(void);

sceSysconGetHardwareInfo2ForDriver

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0x965C68C3

Returns Hardware Info 2 obtained from Syscon command 0x6.

This function was certainly added for PS Vita Slim or PS TV support because Hardware Info risked being fulfilled if too many hardware revisions were made.

Used in SceAudioIn (maybe to check Conexant IC), SceCodec (maybe to check Conexant IC), and _vshSysconGetHardwareInfo2. 

typedef struct SceKernelHardwareInfo2 {
  SceUInt8 flags[0x10];
} SceKernelHardwareInfo2;

int sceSysconGetHardwareInfo2ForDriver(SceKernelHardwareInfo2 *pInfo);

sceSysconGetErnieVersionForDriver

Version NID
0.931-3.740.011 0xFF86F4C5

This is a guessed name. Temp name was sceSysconGetBaryonVersionForDriver. 

int sceSysconGetErnieVersionForDriver(void);

SceSysconForDriver_EBE3262C

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0xEBE3262C

In SceSblPostSsMgr, used just after #sceSysconGetErnieVersionForDriver.

Returns 8 bits of some Syscon Mode information. Bit 6 (from right) is Syscon DownLoader Mode flag. Bit 3 (from right) is Power Online flag. 

SceUInt8 SceSysconForDriver_EBE3262C(void);

sceSysconIsDownLoaderModeForDriver

Version NID
0.931.010 not present
0.990.000-3.740.011 0x9ADD60D2 
int sceSysconIsDownLoaderModeForDriver(void);

sceSysconIsDealDownLoaderModeForDriver

Version NID
0.931.010-3.740.011 0xB7BCC638 
int sceSysconIsDealDownLoaderModeForDriver(void);

sceSysconNopForDriver

Version NID
0.931.010-3.740.011 0x0D0B6D25

Maybe exits Syscon Deal DownLoader mode. 

int sceSysconNopForDriver(void);

sceSysconIsPowerOnlineForDriver

Version NID
0.931.010-3.740.011 0x9DA2A5AB

Returns true iff Syscon information bit 3 (from right) is set. See also #SceSysconForDriver_EBE3262C.

Used in many ScePower functions for example before setting display brightness (to save battery). 

SceBool sceSysconIsPowerOnlineForDriver(void);

sceSysconGetErnieDLVersionForDriver

Version NID
0.931.010-3.740.011 0xD2F456DC

Calls Syscon command 0x1100. 

void sceSysconGetErnieDLVersionForDriver(int *pVersion);

sceSysconGetBatteryVersionForDriver

Version NID
0.931.010-3.740.011 0x68E0031E

Battery IC name: if HWinfo > 7 "Abby" else "Bert". 

int sceSysconGetBatteryVersionForDriver(SceUInt16 *HWinfo, SceUInt16 *FWinfo, SceUInt16 *DFinfo);

sceSysconAbbySyncForDriver

Version NID
0.931.010-1.81 not present
2.000.081-3.740.011 0xDFB024C4

This is a guessed name. 

int sceSysconAbbySyncForDriver(SceUInt32 *puiStatus);

sceSysconGetManufacturesStatusForDriver

Version NID
0.931.010-1.692.000 not present
1.800.071-3.740.011 0x3E09A1F4

In theory, this function should only be called when Product Mode is already set. 

int sceSysconGetManufacturesStatusForDriver(int *piStatus);

sceSysconReadScratchPadForDriver

Version NID
0.931.010-3.740.011 0x299B1CE7

Temp name was sceSysconReadCommandForDriver, sceSysconVsReadDataForDriver.

Calls Syscon command 0x90.

Used in SceRtc.

See also Syscon Scratchpad structure. 

// size: On FW 3.60, must be between 0 and 0x18. On FW 0.931, must be 2, 4 or 8.
// offset: Must be between 0 and 0xFF.
// offset + size must not exceed 0x100
int sceSysconReadScratchPadForDriver(SceUInt32 offset, void *buffer, SceSize size);

sceSysconWriteScratchPadForDriver

Version NID
0.931.010-3.740.011 0xE26488B9

Temp name was sceSysconSendCommandForDriver, sceSysconVsWriteDataForDriver.

Calls Syscon command 0x91.

Used in SceRtc and ScePower.

See also Syscon Scratchpad structure. 

// size: On FW 3.60, must be between 0 and 0x18. On FW 0.931, must be 2, 4 or 8.
// offset: Must be between 0 and 0xFF.
// offset + size must not exceed 0x100
int sceSysconWriteScratchPadForDriver(SceUInt32 offset, void *buffer, SceSize size);

sceSysconNvsSetRunModeForDriver

Version NID
0.931.010-3.740.011 0x81A6060D

Used in sceSblNvsReadDataForKernel and sceSblNvsWriteDataForKernel. 

// mode: 0 before NVS read/write
int sceSysconNvsSetRunModeForDriver(int mode);

sceSysconNvsSetUnkModeForDriver

Version NID
0.931.010-3.740.011 0x2EC6D55D 
// mode: unk
int sceSysconNvsSetUnkModeForDriver(int mode);

sceSysconNvsReadDataForDriver

Version NID
0.931.010-3.740.011 0xACAFA2B8

Used in sceSblNvsReadDataForKernel and sceSblSsGetNvsDataForDriver. 

int sceSysconNvsReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);

sceSysconNvsWriteDataForDriver

Version NID
0.931.010-3.740.011 0x10C9657A

Used in sceSblNvsWriteDataForKernel and sceSblSsSetNvsDataForDriver. 

int sceSysconNvsWriteDataForDriver(SceUInt32 offset, void *buffer, SceSize size);

sceSysconGetMultiCnInfoForDriver

Version NID
0.931.010-3.740.011 0x1503D6A0

Returns data obtained by Syscon command 0x103.

Returns 0x4ff00 when nothing is connected.

Returns 0x40080 when pin 11 is pulled to GND.

Returns 0x40680 when pin 12 is pulled to GND.

Returns 0x40380 when pin 12 is pulled to GND while pin 11 pulled to ground via 100K resistor.

Returns 0x40000 on PSTV

Bits 8 and 9 indicate that an audio-out dock is connected.

Bits 8, 9, 11, 12, 13, 14 and 15 indicate that UDC pins are connected.

Used in SceHpremote, SceUsbServ. 

int sceSysconGetMultiCnInfoForDriver(SceUInt32 *pInfo);

sceSysconSetMultiCnPortForDriver

Version NID
0.931.010-3.740.011 0x8AAB6308

Used in SceSblPostSsMgr. 

// port: 0: for JIG mode, 1 for UART0 logging mode, 0x10000: for normal mode
int sceSysconSetMultiCnPortForDriver(int port);

sceSysconConfigLEDForDriver

Version NID
0.996.090-3.740.011 0x6F586D1A

This is a guessed name.

Used in ScePower. 

#define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue)

// unk: SceLedConfig.unk_4

int sceSysconConfigLEDForDriver(int device, SceUInt32 unk);

SceSysconForDriver_9CA6EB70

Version NID
0.931.010 not present
1.000.071-3.740.011 0x9CA6EB70

On motherboards IRT-001 and older, it does nothing and returns 0, probably because missing hardware that could be a LED, else it sends 2 bytes using Syscon command 0x89E.

Used in ScePower#ScePowerForDriver_38415146. Related to LED. 

int SceSysconForDriver_9CA6EB70(SceBool state);

sceSysconCtrlAccPowerForDriver

Version NID
0.931-3.60 0x8D1D97E8 
int sceSysconCtrlAccPowerForDriver(SceBool enable);

sceSysconCtrlUsbStatusForDriver

Version NID
0.931-3.60 0x59DC5938

Sends 3 bytes to Syscon command 0x89A.

Related to SceUdcd and ScePower. 

int sceSysconCtrlUsbStatusForDriver(SceUInt32 value);

sceSysconCtrlRMRPowerForDriver

Version NID
0.931.010 not present
0.990.000-3.740.011 0x710A7CF0

Temp name was sceSysconCtrlMsPowerForDriver. 

int sceSysconCtrlRMRPowerForDriver(int enable_power);

sceSysconCtrlDevKitUsbPowerForDriver

Version NID
0.931.010-0.940 not present
0.990.000-3.740.011 0xB1F88B11

This is a guessed name. 

int sceSysconCtrlDevKitUsbPowerForDriver(SceBool enable);

SceSysconForDriver_3274A925

Version NID
0.931.010-1.692.000 not present
1.800.071-3.740.011 0x3274A925

Temp name was sceSysconCtrlDolceUsbPowerForDriver.

This function enables/disables a USB bus related to either PS Vita IRS-1001 Wlan/Bt module USB or PS Vita 3G modem USB. This also affects PS TV USB host and maybe also PS TV ethernet.

Used in SceUsbEtherSmsc, SceUsbServ.

This function was maybe added to support IRS-1001 motherboard. 

int SceSysconForDriver_3274A925(SceBool enable);

sceSysconJigOpenPortForDriver

Version NID
0.931.010-3.740.011 0x44A173F5 
int sceSysconJigOpenPortForDriver(void);

sceSysconJigClosePortForDriver

Version NID
0.931.010-3.740.011 0x483FAE05 
int sceSysconJigClosePortForDriver(void);

sceSysconJigSetConfigForDriver

Version NID
0.931.010-3.740.011 0xD24BF916 
int sceSysconJigSetConfigForDriver(SceUInt8 a1, SceUInt8 a2);

sceSysconOutputClockForDriver

Version NID
0.990.000-3.740.011 0x058941D7

Sends 2 bytes to Syscon using Syscon command 0xB0.

sceSysconCtrlHostOutputViaDongleForDriver

Version NID
0.931.010 not present
0.990.000-3.740.011 0xDECCB2B4

Enables / disables Kermit UART0 output (logs) via Dongle (Jig).

Sends 2 bytes to Syscon using Syscon command 0xB2. 

int sceSysconCtrlHostOutputViaDongleForDriver(SceBool enable);

SceSysconForDriver_33B5CDB3

Version NID
0.996.090-3.740.011 0x33B5CDB3

Reads from Syscon using Syscon command 0xB3.

This function was probably added to support IRS-002 motherboard.

SceSysconForDriver_F6D4DDC4

Version NID
0.931.010-1.692.000 not present
1.800.071-3.740.011 0xF6D4DDC4

Reads from Syscon using Syscon command 0xB4. It is probably the "get" equivalent of #SceSysconForDriver_00AE3AEB.

This function was added to support IRS-1001 motherboard.

SceSysconForDriver_00AE3AEB

Version NID
0.931.010-1.692.000 not present
1.800.071-3.740.011 0x00AE3AEB

It is probably a "sceSysconCtrl...ForDriver" function.

Sends 2 bytes to Syscon using Syscon command 0xB5. It is probably the "set" equivalent of #SceSysconForDriver_F6D4DDC4.

This function was added to support IRS-1001 motherboard.

SceSysconForDriver_0D300158

Version NID
3.100.081-3.740.011 0x0D300158

It is probably a "sceSysconCtrl...ForDriver" function.

Sends 2 bytes to Syscon using Syscon command 0xB6. It is probably the "set" equivalent of #SceSysconForDriver_91EF4EC3.

This function was added to support DOL-1002 motherboard.

SceSysconForDriver_91EF4EC3

Version NID
3.100.081-3.740.011 0x91EF4EC3

Reads from Syscon using Syscon command 0xB7. It is probably the "get" equivalent of #SceSysconForDriver_0D300158.

This function was added to support DOL-1002 motherboard.

receive_pm_sm_jig_msg_from_syscon

Version NID
0.931.010-3.740.011 0x3C80B529 
int receive_pm_sm_jig_msg_from_syscon(SceUInt32 offset, SceSize size, void *buf);

send_pm_sm_jig_msg_to_syscon

Version NID
0.931.010-3.740.011 0x7BFBA09E

send_pm_sm_stop_to_syscon

Version NID
0.931.010-3.740.011 0x933D813F

Used just after send_pm_sm_jig_msg_to_syscon or when it fails before. 

int send_pm_sm_stop_to_syscon(int a1, int a2, int a3);

sceSysconIduModeSetForDriver

Version NID
0.931.010-0.996.090 not present
1.030.071-3.740.011 0x956D07CB 
int sceSysconIduModeSetForDriver(void);

sceSysconIduModeClearForDriver

Version NID
0.931.010-0.996.090 not present
1.030.071-3.740.011 0x34574496 
int sceSysconIduModeClearForDriver(void);

sceSysconShowModeSetForDriver

Version NID
0.931.010-1.50 not present
1.600.061-3.740.011 0x6D65B70F 
int sceSysconShowModeSetForDriver(void);

sceSysconShowModeClearForDriver

Version NID
0.931.010-1.50 not present
1.600.061-3.740.011 0x8D7724C0 
int sceSysconShowModeClearForDriver(void);

sceSysconSetWlanCallbackForDriver

Version NID
0.931.010-0.996.090 0x4DEB8712
1.03-3.740.011 not present

This is a guessed name.

Registers a Wlan-related callback.

index 5 on FWs 0.931.010-0.940.

SceSysconForDriver_18A6F4D9

Version NID
0.990.000-3.740.011 0x18A6F4D9

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0 on FW 3.600.011.

No use case seen.

Related to #SceSysconForDriver_C0F215B7. 

int SceSysconForDriver_18A6F4D9(void *cb_0, void *cb_1);

SceSysconForDriver_DE613081

Version NID
0.990.000-3.740.011 0xDE613081

A guessed name is sceSysconSetHeadphoneCallbackForDriver.

Registers an headphone remote related callback.

index 1 on FW 3.600.011.

Used in SceHpremote.

Related to #SceSysconForDriver_C3504ADE. 

int SceSysconForDriver_DE613081(void *cb_0, void *cb_1);

SceSysconForDriver_229A07C2

Version NID
0.990.000-3.740.011 0x229A07C2

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 2 on FW 3.600.011.

No use case seen.

Related to #SceSysconForDriver_B832B72C. 

int SceSysconForDriver_229A07C2(void *cb_0, void *cb_1);

SceSysconForDriver_8351526D

Version NID
0.990.000-3.740.011 0x8351526D

A guessed name is sceSysconSetAlarmTimerCallbackForDriver.

Registers a callback.

index 3 on FW 3.600.011.

Used in SceRtc.

Related to #SceSysconForDriver_86BAAF7D. 

int SceSysconForDriver_8351526D(void *cb_0, void *cb_1);

SceSysconForDriver_9F8340FF

Version NID
0.990.000-3.740.011 0x9F8340FF

A guessed name is sceSysconSetResumeRequestCallbackForDriver.

Registers the "is resume requested" callback.

Used in ScePower to register a callback that sets the ScePower global variable g_resume_requested to SCE_TRUE.

index 4 on FW 3.600.011.

Related to #SceSysconForDriver_A57B5433. 

int SceSysconForDriver_9F8340FF(void *cb_0, void *cb_1);

SceSysconForDriver_35E1689F

Version NID
0.990.000-3.740.011 0x35E1689F

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

Used in SceHpremote.

index 5 on FW 3.600.011.

Related to #SceSysconForDriver_ACC7F71E. 

int SceSysconForDriver_35E1689F(void *cb_0, void *cb_1);

SceSysconForDriver_474A9EA7

Version NID
0.931.010-3.740.011 0x474A9EA7

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0xC on FWs 0.931.010-0.940. index 6 on FW 3.600.011.

Related to #SceSysconForDriver_769F9AC4.

No use case seen. 

int SceSysconForDriver_474A9EA7(void *cb_0, void *cb_1);

SceSysconForDriver_4E88B4D9

Version NID
0.990.000-3.740.011 0x4E88B4D9

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 8 on FW 3.600.011.

Related to #SceSysconForDriver_4BC63A40.

No use case seen. Maybe used in internal modules for Jig. 

int SceSysconForDriver_4E88B4D9(void *cb_0, void *cb_1);

SceSysconForDriver_376CCCB8

Version NID
0.990.000-3.740.011 0x376CCCB8

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 9 on FW 3.600.011.

Related to #SceSysconForDriver_99A254A9.

No use case seen. 

int SceSysconForDriver_376CCCB8(void *cb_0, void *cb_1);

SceSysconForDriver_3BAAC8A9

Version NID
0.931.010-0.995.000 not present
0.996.090-3.740.011 0x3BAAC8A9

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0xA on FW 3.600.011.

Related to #SceSysconForDriver_9A4F4B7C.

No use case seen. 

int SceSysconForDriver_3BAAC8A9(void *cb_0, void *cb_1);

sceSysconSetAccCallbackForDriver

Version NID
0.931.010-0.940 not present
0.995.000-3.740.011 0x4A42712F

This is a guessed name.

Registers 2 callbacks (maybe constructor and destructor or callback and args) for accessory port.

index 0xF on FW 3.600.011.

Used in SceUsbServ. 

int sceSysconSetAccCallbackForDriver(void *cb_0, void *cb_1);

sceSysconSetLowBatteryCallbackForDriver

Version NID
0.931.010-3.740.011 0x3F0DB7C0

Registers the low-battery callback.

index 6 on FWs 0.931-0.940. index 0x10 on FW 3.600.011. 

int sceSysconSetLowBatteryCallbackForDriver(void *cb_0, void *cb_1);

SceSysconForDriver_80D6E061

Version NID
1.000.071-3.740.011 0x80D6E061

A guessed name is sceSysconSetBatteryOnlineCallbackForDriver.

Registers a callback. Maybe related to Battery online status.

index 0x11 on FW 3.600.011. 

int SceSysconForDriver_80D6E061(void *cb_0, void *cb_1);

SceSysconForDriver_7682FE69

Version NID
1.000.071-3.740.011 0x7682FE69

A guessed name is sceSysconSet...Battery...CallbackForDriver.

Registers a battery-related callback.

No use case seen.

index 0x12 on FW 3.600.011.

Related to #SceSysconForDriver_4A184B7C. 

int SceSysconForDriver_7682FE69(void *cb_0, void *cb_1);

SceSysconForDriver_E0D52DF0

Version NID
0.990.000-3.740.011 0xE0D52DF0

A guessed name is sceSysconSet...Battery...CallbackForDriver.

Registers a battery-related callback.

No use case seen.

index 0x13 on FW 3.600.011.

Related to #SceSysconForDriver_ACEE1C70. 

int SceSysconForDriver_E0D52DF0(void *cb_0, void *cb_1);

SceSysconForDriver_2D471528

Version NID
0.931.010-0.940 not present
1.000.071-3.740.011 0x2D471528

A guessed name is sceSysconSet...Battery...CallbackForDriver.

Registers a callback very similar to the low battery callback.

Used in ScePower.

index 0x14 on FW 3.600.011.

Related to #SceSysconForDriver_03C50DC3. 

int SceSysconForDriver_2D471528(void *cb_0, void *cb_1);

SceSysconForDriver_129EA022

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0x129EA022

A guessed name is sceSysconSet...CallbackForDriver.

Used in ScePower.

index 0x15 on FW 3.600.011.

Related to #SceSysconForDriver_BFDA5590. 

int SceSysconForDriver_129EA022(void *cb_0, void *cb_1);

SceSysconForDriver_85E5DEBF

Version NID
0.931.010-0.996.090 not present
1.000.071-3.740.011 0x85E5DEBF

A guessed name is sceSysconSet...CallbackForDriver.

index 0x16 on FW 3.600.011.

Related to #SceSysconForDriver_63B14156.

No use case seen. 

int SceSysconForDriver_85E5DEBF(void *cb_0, void *cb_1);

sceSysconSetThermalAlertCallbackForDriver

Version NID
0.931.010-0.996.090 not present
1.000.071-3.740.011 0x773B8126

Registers the thermal alert callback.

index 0x17 on FW 3.600.011.

Related to #SceSysconForDriver_50CAE242. 

int sceSysconSetThermalAlertCallbackForDriver(void *cb_0, void *cb_1);

SceSysconForDriver_2E4BA4B8

Version NID
0.990.000-3.740.011 0x2E4BA4B8

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x19 on FW 3.600.011.

Related to #SceSysconForDriver_29CF4335.

No use case seen. Maybe used in internal modules for Jig. 

int SceSysconForDriver_2E4BA4B8(void *cb_0, void *cb_1);

SceSysconForDriver_C442D0BE

Version NID
0.931.010-1.692.000 not present
1.800.071-3.740.011 0xC442D0BE

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x1A on FW 3.600.011.

Related to #SceSysconForDriver_9F4042F8.

No use case seen. 

int SceSysconForDriver_C442D0BE(void *cb_0, void *cb_1);

SceSysconForDriver_61AE3970

Version NID
0.931.010-3.01 not present
3.100.081-3.740.011 0x61AE3970

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x1B on FW 3.600.011.

Related to #SceSysconForDriver_C50568E9.

No use case seen. 

int SceSysconForDriver_61AE3970(void *cb_0, void *cb_1);

sceSysconSetLowBatteryInhibitUpdateRebootCallbackForDriver

Version NID
0.931.010-3.18 not present
3.300.041-3.740.011 0x94678881

This is a guessed name.

Registers the low-battery-inhibit-update-reboot callback.

index 0x1C on FW 3.600.011.

No use case seen. 

int sceSysconSetLowBatteryInhibitUpdateRebootCallbackForDriver(void *cb_0, void *cb_1);

sceSysconSetLowBatteryInhibitUpdateDownloadCallbackForDriver

Version NID
0.931.010-3.18 not present
3.300.041-3.740.011 0x7AA00C01

This is a guessed name.

Registers the low-battery-inhibit-update-download callback.

index 0x1D on FW 3.600.011.

No use case seen. 

int sceSysconSetLowBatteryInhibitUpdateDownloadCallbackForDriver(void *cb_0, void *cb_1);

SceSysconForDriver_423D0C58

Version NID
0.990.000-3.740.011 0x423D0C58

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x20 on FW 3.600.011.

No use case seen. 

int SceSysconForDriver_423D0C58(void *cb_0, void *cb_1);

SceSysconForDriver_154676F1

Version NID
0.990.000-3.740.011 0x154676F1

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x21 on FW 3.600.011.

No use case seen. 

int SceSysconForDriver_154676F1(void *cb_0, void *cb_1);

SceSysconForDriver_63352A39

Version NID
0.990.000-3.740.011 0x63352A39

A guessed name is sceSysconSetMicrophoneCallbackForDriver.

Registers a callback.

index 0x22 on FW 3.600.011.

Used in SceHpremote. 

int SceSysconForDriver_63352A39(void *cb_0, void *cb_1);

SceSysconForDriver_14730196

Version NID
0.990.000-3.740.011 0x14730196

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x23 on FW 3.600.011.

No use case seen. 

int SceSysconForDriver_14730196(void *cb_0, void *cb_1);

sceSysconSetAlarmCallbackForDriver

Version NID
0.931.010-3.740.011 0x32418370

Registers the alarm callback.

index 0 on FWs 0.931.010-0.940. index 0x24 on FW 3.600.011. 

int sceSysconSetAlarmCallbackForDriver(void *cb_0, void *cb_1);

sceSysconSetMultiCnOtgCallbackForDriver

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0xA26586B2

This is a guessed name.

Registers 2 callbacks (maybe constructor and destructor or callback and args) for multi-connector OTG on PS Vita Fat.

index 0x25 on FW 3.600.011.

Used in SceUsbServ. 

int sceSysconSetMultiCnOtgCallbackForDriver(void *cb_0, void *cb_1);

sceSysconSetMiniUsbOtgCallbackForDriver

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0x67A4CB9F

This is a guessed name.

Registers 2 callbacks (maybe constructor and destructor or callback and args) for mini-USB OTG on PS Vita Slim.

index 0x26 on FW 3.600.011.

Used in SceUsbServ. 

int sceSysconSetMiniUsbOtgCallbackForDriver(void *cb_0, void *cb_1);

sceSysconUpdaterSetSegmentForDriver

Version NID
0.931.010-3.740.011 0x9B00BC7F 
// segment_no: a 8bit value
int sceSysconUpdaterSetSegmentForDriver(SceUInt32 segment_no);

sceSysconUpdaterLoadSegmentForDriver

Version NID
0.931.010-3.740.011 0x356B9696 
// pSegment: the encrypted segment to load
// unk: maybe segment_no
// size: usually 0x400
int sceSysconUpdaterLoadSegmentForDriver(void *segment, int unk, SceSize size);

sceSysconUpdaterLoadSegment2ForDriver

Version NID
0.931.010-3.740.011 0x734544E4 
// pSegment: the encrypted segment to load
// unk: maybe segment_no
// size: usually 0x400
int sceSysconUpdaterLoadSegment2ForDriver(void *segment, int unk, SceSize size);

sceSysconUpdaterCalcChecksumForDriver

Version NID
0.931.010-3.740.011 0xD27C3D80

Computes checksum to use with #sceSysconUpdaterExecProgrammingForDriver. It does not call any Syscon command. 

int sceSysconUpdaterCalcChecksumForDriver(void *data, SceSize size, int *checksum);

sceSysconUpdaterExecProgrammingForDriver

Version NID
0.931.010-3.740.011 0x69AD76E4

Executes programming, i.e writes segments to Syscon Flash memory. 

// checksum: value got from sceSysconUpdaterCalcChecksumForDriver
int sceSysconUpdaterExecProgrammingForDriver(int checksum);

sceSysconUpdaterSetRunModeForDriver

Version NID
0.931.010-3.740.011 0xB487C2FB

On 3.60 Ernie firmware, only updater run mode 0x72BA seems to be actually useful. Modes 0x9A54 and 0x152E are recognized but just make the function return without doing anything. Mode 0xC5E7 is not recognized by Ernie firmware, although it is present on ARM side. 

// mode: 0x72BA (0.931.010-3.740.011), 0x9A54 (0.931.010-3.740.011), 0x152E (3.600.011-3.740.011), 0x3665 (3.600.011-3.740.011), 0xC5E7 (3.600.011-3.740.011), 
int sceSysconUpdaterSetRunModeForDriver(int mode);

sceSysconUpdaterExecFinalizeForDriver

Version NID
0.931.010-3.740.011 0xC7747A63 
// digest: sha1 of decrypted concatenated segments, comes from Syscon Update package packet type 0x20
// size: usually 0x14 (sha1 size)
int sceSysconUpdaterExecFinalizeForDriver(void *digest, SceSize size);

SceSysconForDriver_CBA836FF

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0xCBA836FF

Sends a 0x18-byte buffer to Syscon command 0x1185. This Syscon command 0x1185 seems to be unimplemented in recent Syscon firmwares: it does not do anything. 

// size: must be 0x18
int SceSysconForDriver_CBA836FF(void *pBuf, SceSize size);

snvs_read

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0xEBDF88B9

This is a guessed name.

Used in SceSblPostSsMgr to read data from SNVS with pm_sm command 8. Also used in SceSblUpdateMgr with update_service_sm commands 0xB0002 and 0xC0002. 

// in_size: 0x10
// out_size: 0x30
int snvs_read(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);

snvs_write

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0x63683B9B

This is a guessed name.

Used in SceSblPostSsMgr to write data to SNVS with pm_sm command 8. Also used in SceSblUpdateMgr with update_service_sm commands 0xB0002 and 0xC0002. 

// in_size: 0x30
// out_size: 0x10
int snvs_write(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);

syscon_update_command_0xD00002

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0x4D03754A

This is a guessed name.

Calls Syscon command 0xD0.

Used in SceSblUpdateMgr with update_service_sm command 0xD0002. 

// in_buf: buffer that embeds input data, usually 0xD0002 command request + 8
// in_size: usually 0x28
// out_buf: buffer to receive result, usually 0xD0002 command request + 0x30
// out_size: usually 0x28
int syscon_update_command_0xD00002(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);

sceSysconSetAffirmativeRertryModeForDriver

Version NID
0.931.010-3.740.011 0x901D6CD4

Typo is the name is intentional.

Sets a flag used internally by SceSyscon.

Used in SceCtrl, ScePower. 

int sceSysconSetAffirmativeRertryModeForDriver(int enable);

sceSysconGetControlsInfoForDriver

Version NID
0.931.010-3.740.011 0x145F59A4

This is a guessed name.

See Boot Controls Info.

Calls Syscon command 0x100. 

int sceSysconGetControlsInfoForDriver(SceUInt32 *pCtrl);

SceSysconForDriver_76272CB9

Version NID
0.931.010-1.692.000 not present
1.800.071-3.740.011 0x76272CB9

Gets a 4 byte value.

Calls Syscon command 0x120. 

int SceSysconForDriver_76272CB9(SceUInt32 *unk);

sceSysconGetClockForDriver

Version NID
0.931.010-3.740.011 0xD7BEFF8B

Gets Syscon power-on time in ticks of 0.5 second. Each second the counter automatically increases by 2.

Calls Syscon command 0x11.

Used in SceRtc to calculate the current time and date. 

int sceSysconGetClockForDriver(SceUInt32 *puiTime);

SceSysconForDriver_3168F3AF

Version NID
0.931.010-3.740.011 0x3168F3AF

Calls Syscon command 0x12.

It is an alarm timer. It must be initialized using Syscon command 0x82 via #SceSysconForDriver_51164951. 

// FW 0.931.010
int SceSysconForDriver_3168F3AF(SceUInt32 *pResult);

// FW 3.600.011-3.740.011
int SceSysconForDriver_3168F3AF(SceUInt32 *pResult, SceUInt32 *pResult2);

SceSysconForDriver_BA09F171

Version NID
0.931.010-0.940 not present
0.990.000-3.740.011 0xBA09F171

Calls Syscon command 0x13.

It might be related to alarm/timer. 

int SceSysconForDriver_BA09F171(SceUInt32 *pResult, SceUInt32 *pResult2);

sceSysconSetClockForDriver

Version NID
0.931.010-3.740.011 0x9B6A6F64

Calls Syscon command 0x81.

Sets current Syscon power on time in ticks of 0.5 second. The set value can be get with #sceSysconGetClockForDriver.

Used in SceRtc. Set to 0 just before setting Current Tick, to reset syscon power on time. 

int sceSysconSetClockForDriver(SceUInt32 time);

SceSysconForDriver_51164951

Version NID
0.931.010-3.740.011 0x51164951

Calls Syscon command 0x82. On Syscon version < 0x90907, 4 bytes are sent to Syscon, whilst on Syscon version >= 0x90907, 5 bytes are sent to Syscon.

Used in SceRtc#sceRtcSetAlarmTickForDriver.

The set value can be get with #SceSysconForDriver_3168F3AF. 

// a1: seen value: 0xffffffff during Syscon Init
// a2: some 8-bit flag, seen value: 0 during Syscon Init

// FW 0.931.010
int SceSysconForDriver_51164951(int a1);

// FW 3.600.011-3.740.011
int SceSysconForDriver_51164951(int a1, int a2);

SceSysconForDriver_373ECF8A

Version NID
0.931.010 not present
0.990.000-3.740.011 0x373ECF8A

Calls Syscon command 0x83. Sends 3 bytes to Syscon. Used only if Hardware Info indicates that the motherboard is not IRT-001 or IRT-002 or type 0x10 (maybe named IRS-001) and if console is not in manufacturing mode. 

int SceSysconForDriver_373ECF8A(SceUInt32 unk);

SceSysconForDriver_2659535C

Version NID
0.931.010 not present
0.990.000-3.740.011 0x2659535C

Calls Syscon command 0x84. Sends 1 byte to Syscon: 0. 

int SceSysconForDriver_2659535C(void);

SceSysconForDriver_4295D497

Version NID
0.931.010 not present
0.990.000-3.740.011 0x4295D497

Calls Syscon command 0x85. Sends 1 byte to Syscon: 0. 

int SceSysconForDriver_4295D497(void);

SceSysconForDriver_253CC522

Version NID
0.931.010 not present
2.100.081-3.740.011 0x253CC522

Calls Syscon command 0x807. Gets 2 bytes from Syscon.

On DevKit, it returns 0x8025023F. Maybe limited by model: PS TV? PS Vita Slim?. 

int SceSysconForDriver_253CC522(SceUInt16 *pResult);

SceSysconForDriver_175CE5A1

Version NID
0.931.010-3.740.011 0x175CE5A1

Calls Syscon command 0x883. Gets 8 bytes from Syscon. 

// pDst: pointer to a buffer of at least 8 bytes
int SceSysconForDriver_175CE5A1(void *pDst);

sceSysconCtrlDeviceResetForDriver

Version NID
0.931.010-3.740.011 0x40FF3898

Sends 2 bytes to Syscon command 0x88F.

0xC/0 : Touch Front or Back device

0xC/1 : Touch Front or Back device 

int sceSysconCtrlDeviceResetForDriver(SceUInt8 a1, SceUInt8 a2);

SceSysconForDriver_285594F8

Version NID
0.931.010-3.740.011 0x285594F8

Sends 2 bytes to Syscon command 0x890. 

int SceSysconForDriver_285594F8(SceUInt16 value);

sceSysconCtrlLEDForDriver

Version NID
0.931.010-3.740.011 0x04EC7579 
#define STATE_ON 1
#define STATE_OFF 0

#define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue)

int sceSysconCtrlLEDForDriver(SceUInt16 device, SceBool state);

sceSysconCtrlChargeACForDriver

Version NID
0.931.010-3.740.011 0x596B17B7

Sends 2 bytes to Syscon command 0x892. Related to Battery. Maybe enables/disables battery charging.

Used in ScePower's module_start. 

int sceSysconCtrlChargeACForDriver(SceBool enable);

sceSysconCtrlChargeVBUSForDriver

Version NID
0.931.010-3.740.011 0x2A4B0437

Sends 3 bytes to Syscon command 0x893. Related to Battery. Maybe enables/disables battery charging.

Used in ScePower's module_start. 

// a1: ex: 0, 1
// a2: ex: 0, 1

// FW 0.931.010
int sceSysconCtrlChargeVBUSForDriver(SceUInt32 a1);

// FW 3.600.011-3.740.011
int sceSysconCtrlChargeVBUSForDriver(SceUInt32 a1, SceUInt32 a2);

SceSysconForDriver_5CDDA14D

Version NID
0.931.010-3.740.011 0x5CDDA14D

A guessed name is sceSysconCtrlHpremoteForDriver.

If Syscon version < 0x80001, it does nothing and returns 0, else it sends 2 bytes to Syscon command 0x899.

Maybe enables/disables Jack power.

Used in SceHpremote. 

int SceSysconForDriver_5CDDA14D(SceBool enable);

SceSysconForDriver_A2FE9BF9

Version NID
0.931.010-3.740.011 0xA2FE9BF9

Gets information related to battery charge status, or USB power connection. See also Ernie#CMD_0x0800.

Used in ScePower's module_start. 

int SceSysconForDriver_A2FE9BF9(void *pResult);

sceSysconGetBatteryTempForDriver

Version NID
0.931.010-3.740.011 0x9070F139

If Syscon version <= 0x70503, it calls Syscon command 0x8A0, else Syscon command 0x981.

Used in ScePower's module_start. 

int sceSysconGetBatteryTempForDriver(int *pResult);

sceSysconGetBatteryRemainCapacityForDriver

Version NID
0.931.010-3.740.011 0xC562AF3A

Only used in ScePower.

If Syscon version <= 0x70503, it calls Syscon command 0x802, else Syscon command 0x900. 

int sceSysconGetBatteryRemainCapacityForDriver(SceUInt32 *pResult);

sceSysconGetBatteryVoltForDriver

Version NID
0.931.010-3.740.011 0x03F11220

If Syscon version <= 0x70503, it calls Syscon command 0x803, else Syscon command 0x901.

Used in ScePower. 

int sceSysconGetBatteryVoltForDriver(SceUInt32 *pResult);

sceSysconGetBatteryLifePercentForDriver

Version NID
0.931.010-1.06 not present
1.500.151-3.740.011 0xAD0A8275

Used in ScePower. 

int sceSysconGetBatteryLifePercentForDriver(SceUInt32 *pResult);

SceSysconForDriver_00A65FC1

Version NID
0.931.010-3.740.011 0x00A65FC1

If Syscon version <= 0x70503, it calls Syscon command 0x8A1, else Syscon command 0x982.

Used in ScePower. 

int SceSysconForDriver_00A65FC1(int *pResult);

sceSysconGetBatteryElecForDriver

Version NID
0.931.010-3.740.011 0x0826BA07

If Syscon version <= 0x70503, it calls Syscon command 0x8A2, else Syscon command 0x983.

Used in ScePower. 

int sceSysconGetBatteryElecForDriver(SceUInt16 *pResult);

sceSysconGetBatteryLifeTimeForDriver

Version NID
0.931.010-3.740.011 0xB841C141

If Syscon version <= 0x70503, it calls Syscon command 0x8A3, else Syscon command 0x984.

Used in ScePower. 

int sceSysconGetBatteryLifeTimeForDriver(SceUInt16 *pResult);

sceSysconGetBatterySOHForDriver

Version NID
0.931.010-3.740.011 0x91D3B7A3

If Syscon version <= 0x70503, it calls Syscon command 0x8A4, else Syscon command 0x985.

Used in ScePower. 

int sceSysconGetBatterySOHForDriver(void *pResult);

SceSysconForDriver_FDB3AE9D

Version NID
0.931.010-3.740.011 0xFDB3AE9D

Gets 0x10 bytes from Syscon command 0x183. 

int SceSysconForDriver_FDB3AE9D(int *pResult);

SceSysconForDriver_C3504ADE

Version NID
0.931.010-3.740.011 0xC3504ADE

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_DE613081.

Used in SceHpremote. 

SceBool SceSysconForDriver_C3504ADE(void);

SceSysconForDriver_B832B72C

Version NID
0.931.010-3.740.011 0xB832B72C

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_229A07C2. 

SceBool SceSysconForDriver_B832B72C(void);

SceSysconForDriver_86BAAF7D

Version NID
0.931.010-3.740.011 0x86BAAF7D

A guessed name is sceSysconIsAlarmTimerExistForDriver.

Returns the global variable related to #SceSysconForDriver_8351526D.

Used in SceRtc. 

SceBool SceSysconForDriver_86BAAF7D(void);

SceSysconForDriver_A57B5433

Version NID
0.931.010-3.740.011 0xA57B5433

A guessed name is sceSysconIsResumeRequestedForDriver.

Related to #SceSysconForDriver_9F8340FF. 

SceBool SceSysconForDriver_A57B5433(void);

SceSysconForDriver_ACC7F71E

Version NID
0.931.010-3.740.011 0xACC7F71E

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_35E1689F.

Used in SceHpremote. 

SceBool SceSysconForDriver_ACC7F71E(void);

SceSysconForDriver_769F9AC4

Version NID
0.931.010-3.740.011 0x769F9AC4

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_474A9EA7.

Returns always SCE_TRUE on PS TV. This function could be related to USB or ethernet availability.

No use case seen. 

SceBool SceSysconForDriver_769F9AC4(void);

SceSysconForDriver_4BC63A40

Version NID
0.931.010-3.740.011 0x4BC63A40

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_4E88B4D9.

Used in SceSblPostSsMgr. 

SceBool SceSysconForDriver_4BC63A40(void);

SceSysconForDriver_99A254A9

Version NID
0.931.010-3.740.011 0x99A254A9

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_376CCCB8.

No use case seen. 

SceBool SceSysconForDriver_99A254A9(void);

SceSysconForDriver_9A4F4B7C

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0x9A4F4B7C

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_3BAAC8A9.

No use case seen. 

SceBool SceSysconForDriver_9A4F4B7C(void);

SceSysconForDriver_92D2C6A4

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0x92D2C6A4 
int SceSysconForDriver_92D2C6A4(void);

SceSysconForDriver_B9EA2FA8

Version NID
0.931.010-0.940 not present
0.995.000-3.740.011 0xB9EA2FA8

A guessed name is sceSysconIsAccExistForDriver.

Only used in SceUsbServ. 

SceBool SceSysconForDriver_B9EA2FA8(void);

SceSysconForDriver_29CF4335

Version NID
0.931.010-3.740.011 0x29CF4335

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_2E4BA4B8.

It is related to Ernie DL Mode.

Used in SceSblPostSsMgr. 

SceBool SceSysconForDriver_29CF4335(void);

SceSysconForDriver_32B2DB3D

Version NID
0.931.010-3.740.011 0x32B2DB3D 
int SceSysconForDriver_32B2DB3D(void);

sceSysconIsHeadphoneExistForDriver

Version NID
0.931.010-3.740.011 0x142D5E82

Used in SceHpremote#sceHprmIsHeadphoneExistForDriver. 

SceBool sceSysconIsHeadphoneExistForDriver(void);

sceSysconIsMotionDevExistForDriver

Version NID
0.931.010-3.740.011 0x490C5548

This is a guessed name.

Used in SceMotionDev. 

SceBool sceSysconIsMotionDevExistForDriver(void);

SceSysconForDriver_012B57B3

Version NID
0.931.010 not present
0.940-3.740.011 0x012B57B3 
int SceSysconForDriver_012B57B3(void);

SceSysconForDriver_27758A64

Version NID
0.931.010-0.940 not present
1.000.071-3.740.011 0x27758A64

A guessed name is sceSysconIsBatteryOnlineForDriver, deriving from #sceSysconIsPowerOnlineForDriver.

Used in ScePower#scePowerGetBatteryRemainLevelForDriver, ScePower#scePowerIsLowBatteryForDriver, ScePower's module_start.

Returns the global variable related to #SceSysconForDriver_80D6E061. 

SceBool SceSysconForDriver_27758A64(void);

SceSysconForDriver_4A184B7C

Version NID
0.931.010-0.940 not present
1.000.071-3.740.011 0x4A184B7C

A guessed name is sceSysconIs...ForDriver.

Returns some information about battery.

Used in ScePower#ScePowerForDriver_627A89C6.

Returns the global variable related to #SceSysconForDriver_7682FE69. 

SceBool SceSysconForDriver_4A184B7C(void);

SceSysconForDriver_ACEE1C70

Version NID
0.931.010-0.940 not present
0.996.090-3.740.011 0xACEE1C70

A guessed name is sceSysconIs...ForDriver.

Returns information about battery. Only used when battery is working.

Used in ScePower#ScePowerForDriver_0D56C601.

Returns the global variable related to #SceSysconForDriver_E0D52DF0. 

SceBool SceSysconForDriver_ACEE1C70(void);

SceSysconForDriver_03C50DC3

Version NID
0.931.010-0.940 not present
1.000.071-3.740.011 0x03C50DC3

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_2D471528. 

SceBool SceSysconForDriver_03C50DC3(void);

SceSysconForDriver_BFDA5590

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0xBFDA5590

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_129EA022. 

SceBool SceSysconForDriver_BFDA5590(void);

SceSysconForDriver_63B14156

Version NID
0.931.010-0.996.090 not present
1.000.071-3.740.011 0x63B14156

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_85E5DEBF. 

SceBool SceSysconForDriver_63B14156(void);

SceSysconForDriver_50CAE242

Version NID
0.931.010-0.940 not present
1.000.071-3.740.011 0x50CAE242

A guessed name is sceSysconIsThermalAlertForDriver.

Returns the global variable related to #sceSysconSetThermalAlertCallbackForDriver.

Used in ScePower. 

SceBool SceSysconForDriver_50CAE242(void);

SceSysconForDriver_9F4042F8

Version NID
0.931.010-1.692.000 not present
1.800.071-3.740.011 0x9F4042F8

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_C442D0BE.

No use case seen. 

SceBool SceSysconForDriver_9F4042F8(void);

SceSysconForDriver_C50568E9

Version NID
0.931.010-3.01 not present
3.100.081-3.740.011 0xC50568E9

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_61AE3970.

This function was added to support DOL-1002 motherboard.

No use case seen. 

SceBool SceSysconForDriver_C50568E9(void);

sceSysconIsLowBatteryForDriver

Version NID
0.931.010-3.740.011 0xD7F5A797

This is a guessed name.

Only used in ScePower. 

SceBool sceSysconIsLowBatteryForDriver(void);

sceSysconIsLowBatteryInhibitUpdateRebootForDriver

Version NID
0.931.010-3.18 not present
3.300.041-3.740.011 0x1A0C140F

This function was added along with ScePower#scePowerIsLowBatteryInhibitUpdateReboot.

Used in ScePower#scePowerIsLowBatteryInhibitUpdateReboot. 

SceBool sceSysconIsLowBatteryInhibitUpdateRebootForDriver(void);

sceSysconIsLowBatteryInhibitUpdateDownloadForDriver

Version NID
0.931.010-3.18 not present
3.300.041-3.740.011 0x1E3130EE

This function was added along with ScePower#scePowerIsLowBatteryInhibitUpdateDownload.

Used in ScePower#scePowerIsLowBatteryInhibitUpdateDownload. 

SceBool sceSysconIsLowBatteryInhibitUpdateDownloadForDriver(void);

sceSysconGetBatteryRemainLevelForDriver

Version NID
0.931.010-3.18 not present
3.300.041-3.740.011 0x26F9D729

Only used if Syscon version >= 0x1040105.

This function was added along with ScePower#scePowerGetBatteryRemainLevelForDriver.

Used in ScePower#scePowerGetBatteryRemainLevelForDriver. 

int sceSysconGetBatteryRemainLevelForDriver(SceUInt8 *pResult1, SceUInt8 *pResult2);

SceSysconForDriver_C0F215B7

Version NID
0.931.010-0.990.000 not present
0.996.090-3.740.011 0xC0F215B7

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_18A6F4D9.

The global variable is updated by #sceSysconCmdSyncForDriver. 

SceBool SceSysconForDriver_C0F215B7(void);

SceSysconForDriver_D6F6D472

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0xD6F6D472

Gets electric information (maybe intensity) of the device connected to USB OTG on PS Vita Slim. It should be studied if PS TV supports this function and if this function was initially targetting PS TV.

Returns a global variable updated by #sceSysconCmdSyncForDriver, obtained using Syscon command 0x130. 

int SceSysconForDriver_D6F6D472(int *pInfo);

SceSysconForDriver_F99BC858

Version NID
0.931.010-3.01 not present
3.100.081-3.740.011 0xF99BC858

Detects microSD swap.

Calls syscon command 0x131.

This function was maybe added to support a prototype motherboard that has a microSD port. 

int SceSysconForDriver_F99BC858(SceBool *isSwapped);

SceSysconForDriver_E7893732

Version NID
0.931.010-2.060.011 not present
2.100.081-3.740.011 0xE7893732

Calls Syscon command 0x1B0. Related to UART or JIG on PS Vita Slim or PS TV. 

// value holds 3 useful bytes and 1 byte not sent to syscon
int SceSysconForDriver_E7893732(int value);

sceSysconGetElmoFwVersionForDriver

Version NID
0.931.010-3.740.011 0xA039B563

Calls Syscon command 0x880. 

int sceSysconGetElmoFwVersionForDriver(SceUInt32 *pResult);

sceSysconGetCookieFwVersionForDriver

Version NID
0.990.000-3.740.011 0x9BF78047

Calls Syscon command 0x881. 

int sceSysconGetCookieFwVersionForDriver(SceUInt32 *pResult);

sceSysconReadElmoRegForDriver

Version NID
0.990.000-3.740.011 0x5BF765BB

This is a guessed name.

Calls Syscon command 0x895.

sceSysconWriteElmoRegForDriver

Version NID
0.990.000-3.740.011 0xCCC71C28

This is a guessed name.

Calls Syscon command 0x896.

sceSysconReadCookieRegForDriver

Version NID
0.990.000-3.740.011 0x95975DD1

This is a guessed name.

Calls Syscon command 0x897. Probably reads data from Cookie.

sceSysconWriteCookieRegForDriver

Version NID
0.990.000-3.740.011 0xF39300D3

This is a guessed name.

Calls Syscon command 0x898. Probably writes data to Cookie.

Returns error 0x80250001 if offset is greater than 0xFF. 

// offset: 0-0xFF
int sceSysconWriteCookieRegForDriver(SceUInt32 offset, SceUInt16 data);

Commands

It seems like the command format is as follows: (direction << 8) | cmd_id, where direction = 1 means write to syscon, and direction = 0 means read from syscon.

Command Return size (without considering the 2 bytes rx.size and rx.error_code) Functions NIDs Description
0x0 0x0 0x0D0B6D25
0x1 0x4 module_start sceSysconGetErnieVersionForDriver. Used during SysconInit.
0x2 0xC module_start sceSysconGetTimeStampForDriver. Returns 12-byte string followed by at least 2-byte memory leak. Used during SysconInit.
0x3 0x4 module_start sceSysconGetSleepFactor. Used during SysconInit.
0x4 0x4
0x5 0x4 0xCBD6D8BC, module_start sceSysconGetHardwareInfoForDriver
0x6 0x10 0x965C68C3, module_start sceSysconGetHardwareInfo2ForDriver. Get Hardware Info 2. See KBL_Param#Hardware_Info_2.
0x10 0x2 0xCF5B2F2F sceSysconGetWakeupFactorForDriver
0x11 0x4 0xD7BEFF8B sceSysconGetClockForDriver
0x12 0x5 or 0x6 0x3168F3AF ??
0x13 0x2 0xBA09F171 ??
0x14 0x1 0x93075DD1 ??
0x15 0x4 0x3E09A1F4 sceSysconGetManufacturesStatusForDriver
0x80 0x0 module_start ?? Used during SysconInit.
0x81 ? 0x9B6A6F64 sceSysconSetClockForDriver
0x82 ? 0x51164951
0x83 ? 0x373ECF8A Sends 3 bytes to Syscon.
0x84 ? 0x2659535C Sends 1 byte to Syscon.
0x85 ? 0x4295D497
0x86 8 0x701535FC sceSysconGetLogInfoForDriver
0x87 0 0x4E55CF5E sceSysconLogStartForDriver. Sends 1 byte to Syscon: 0.
0x88 0x18 0x487D97F3 sceSysconLogReadDataForDriver. Sends 2 bytes to Syscon: offset.
0x89 0 0x9C0B1E61 sceSysconLogStartWaitingForDriver. Sends 1 byte to Syscon: 0.
0x90 ?0x3B? 0x299B1CE7 sceSysconReadScratchPadForDriver
0x91 ?0x3B? 0xE26488B9 sceSysconWriteScratchPadForDriver
0xA0 ?0x10 or 0x28? second_loader See Ernie Secure.
0xB0 0 0x058941D7 sceSysconOutputClockForDriver. Sends 2 bytes to Syscon.
0xB1 0 0xDF8C6D2D sceSysconCtrlWirelessPowerDownForDriver
0xB2 0 0xDECCB2B4 sceSysconCtrlHostOutputViaDongleForDriver. Sends 2 bytes to Syscon.
0xB3 at least 1 0x33B5CDB3 ??
0xB4 at least 1 0xF6D4DDC4 ??
0xB5 0 0x00AE3AEB Probably a control command. Sends 2 bytes to Syscon.
0xB6 0 0x0D300158 Probably a control command. Sends 2 bytes to Syscon.
0xB7 at least 1 0x91EF4EC3 ??
0xC0 ?0x3E?
0xC1 0 0x94AB13CC sceSysconErnieShutdownForDriver. Sends 2 bytes to Syscon.
0xD0 ?0x2A or 0x28?
0xD1 ?0x2?
0xD2 ?0x30? second_loader, SNVS functions See Ernie Secure. SNVS RW.
0xD3 ?0x12?
0x100 0x4 0x145F59A4 sceSysconGetControlsInfoForDriver. Used in SceCtrlVblankHandler in SceCtrl.
0x101 0x8 sceSysconGetControlsInfo2ForDriver. Used in SceCtrlVblankHandler in SceCtrl. Uses Ernie version and Ernie DL version.
0x102 0xC
0x103 0x4 0x1503D6A0 sceSysconGetMultiCnInfoForDriver
0x104 0xC sceSysconGetControlsInfo3ForDriver. Used in SceCtrlVblankHandler in SceCtrl.
0x105 ? Uses string "PS" then "TUV".
0x106 ?
0x107 ?
0x108 ?
0x109 ?
0x110 ?
0x120 ? 0x76272CB9 ??
0x121 ?
0x130 0x4 module_start, 0xD6F6D472 Get USB OTG device electric info (maybe intensity). Used during SysconInit.
0x131 ?0x1? (read) 0xF99BC858 ?? Added on a FW > 2.50 and <= 3.100.081.
0x140 ?
0x141 ?
0x142 ?
0x143 ?
0x144 ?
0x145 ?
0x146 ?
0x147 ?
0x148 ?
0x150 ?
0x151 ?
0x152 ?
0x153 ?
0x154 ?
0x155 ?
0x156 ?
0x157 ?
0x160 ?
0x161 ?
0x162 ?
0x163 ?
0x168 ?
0x170 ?
0x171 ?
0x172 ?
0x180 ? Set analog sampling. Sends 2 bytes to Syscon: 0 to disable, 1 to enable on Syscon version is < 0x90202, 3 to enable on Syscon version is >= 0x90202. Used in SceCtrlVblankHandler in SceCtrl.
0x181 0 0xCFCEE733 Sends 2 bytes to Syscon.
0x182 ?
0x183 0x10 0xFDB3AE9D Gets some info.
0x184 ?
0x185 ?
0x186 ?
0x187 ?
0x188 ?
0x189 ?
0x18A ?
0x18B ?
0x18C ?
0x18D ?
0x18E ?
0x18F ?
0x190 0 0x8AAB6308 sceSysconSetMultiCnPortForDriver. Sends 3 bytes to Syscon.
0x191 ?
0x192 ?
0x1A0 ?
0x1A1 ?
0x1B0 0 0xE7893732 Sends 3 bytes to Syscon.
0x1B2 ?
0x1C0 ?
0x1C1 ?
0x1C2 ?
0x1C3 ?
0x1C4 ?
0x1D0 ?
0x1D1 ?
0x1D2 ?
0x1D3 ?
0x1D4 ?
0x1D5 ?
0x1E0 ?
0x1E1 ?
0x1E2 ?
0x1E3 ?
0x300 ?
0x301 ?
0x303 ?
0x380 at least 1 0xF492E69E sceSysconGetTouchpanelDeviceInfoForDriver
0x38A at least 1 0xA1F1B973 ??
0x390 at least 1 0x030D447F sceSysconGetTouchpanelDeviceInfo2ForDriver
0x392 ? 0x48ED8981, 060E55C1
0x393 ? 0x9A28BEEF, 0x8874EF45 Used in SceSblUpdateMgr
0x3A0 ? ?? sceSysconTouchStartBlModeForDriver
0x3A1 ? ?? sceSysconTouchUnlockDeviceForDriver
0x3A2 ? ?? sceSysconTouchSetProgramDataForDriver
0x3A3 ? ?? sceSysconTouchExecProgramDataForDriver
0x3A4 ? ?? sceSysconTouchGetBLStatusForDriver
0x3A9 0 0x010F95D9 Sends 1 byte to Syscon.
0x3AB ? 0x357CC9D9
0x3AC ? 0x3664E2C0 ??
0x3AF ? 0xB8F4F4E3
0x3B0 ? ?? sceSysconTouchStartBlModeForDriver
0x3B1 ? ?? sceSysconTouchUnlockDeviceForDriver
0x3B2 ? ?? sceSysconTouchSetProgramDataForDriver
0x3B3 ? ?? sceSysconTouchExecProgramDataForDriver
0x3B4 ? ?? sceSysconTouchGetBLStatusForDriver
0x3B9 ? 0x42E599AC
0x3BB ? 0xCCA56A16
0x3BC ? 0x2E6D97CD ??
0x3BF ? 0x240A604E
0x3C2 ? 0x5946B29B, 0x10327C64 Used in SceSblUpdateMgr
0x480 ? 0xD01E64FC ??
0x481 ? 0x9A7858B6 ??
0x800 ?0x4? 0xA2FE9BF9 SceSysconForDriver_A2FE9BF9. ScePower related.
0x801 0x0 ??
0x802 ?0x4? 0xC562AF3A sceSysconGetBatteryRemainCapacityForDriver. Replaced by Syscon command 0x900 on Syscon version > 0x70503.
0x803 0x4 0x03F11220 sceSysconGetBatteryVoltForDriver. Replaced by Syscon command 0x901 on Syscon version > 0x70503.
0x804 ? ??
0x805 ?0x0? 0xEF810687 sceSysconGetUsbDetStatusForDriver
0x806 ?0x1? 0xE7F5D3DC Reboots PS Vita?
0x807 0x2 0x253CC522 ??
0x820 0x0 0x727F985A sceSysconCtrlDolceLEDForDriver. PSTV LED on
0x821 0x0 0x727F985A sceSysconCtrlDolceLEDForDriver. PSTV LED blink slow
0x822 0x0 0x727F985A sceSysconCtrlDolceLEDForDriver. PSTV LED blink fast
0x840 ?0x1? 0x4FEC564C sceSysconGetManualChargeModeForDriver
0x841 ?0x1? 0x3C3B949C ??
0x842 ?0x1? 0x1C29C00E ??
0x843 ?0x1? 0x730E4725 ??
0x880 0x4 0xA039B563 sceSysconGetElmoFwVersionForDriver
0x881 ? 0x9BF78047 sceSysconGetCookieFwVersionForDriver
0x882 0x6 0x68E0031E sceSysconGetBatteryVersionForDriver. Replaced by Syscon command 0x980 on Syscon version > 0x70503.
0x883 0x8 0x175CE5A1 ??
0x884 ? 0x3FDD29D6 ??
0x885 ? 0x79E6DD8B ??
0x886 ?0x2? 0x62155962 sceSysconCtrlHdmiCecPowerForDriver
0x887 ? 0x063425AE sceSysconCtrlMotionSensorPowerForDriver
0x888 ?0x2? 0xBE1ADE4F sceSysconCtrlSdPowerForDriver
0x889 ?0x2? 0x8D1D97E8 sceSysconCtrlAccPowerForDriver
0x88A ? 0x4FBDA504, 0xA2E85DB9 sceSysconCtrlWirelessPowerForDriver, sceSysconCtrlWirelessPower2ForDriver
0x88B ? 0x5A614349 ??
0x88C ? 0xB872E904 ??
0x88D ? 0xDD16ABD9 ??
0x88E ?0x2? 0x7F198FA2 sceSysconCtrlVoltageForDriver. See Ernie#CMD_0x088E_-_CtrlVoltage.
0x88F ?0x2? 0x40FF3898 sceSysconCtrlDeviceResetForDriver. ?UsbEtherSmsc and WlanBt related?
0x890 ? 0x285594F8 ??
0x891 ?0x2? 0x04EC7579 sceSysconCtrlLEDForDriver
0x892 ?0? 0x596B17B7 SceSysconForDriver_596B17B7. ScePower related.
0x893 ?0? 0x2A4B0437 SceSysconForDriver_2A4B0437. ScePower related.
0x895 ? 0x5BF765BB sceSysconReadElmoRegForDriver
0x896 ? 0xCCC71C28 sceSysconWriteElmoRegForDriver
0x897 ? 0x95975DD1 sceSysconReadCookieRegForDriver
0x898 ? 0xF39300D3 sceSysconWriteCookieRegForDriver
0x899 ?0? 0x5CDDA14D ?Guessed name: sceSysconCtrlHpremoteForDriver? SceHpremote related.
0x89A ?0? 0x59DC5938 sceSysconCtrlUsbStatusForDriver
0x89B ?0x2? 0x710A7CF0 sceSysconCtrlRMRPowerForDriver
0x89C ?0x2? 0xB1F88B11 sceSysconCtrlDevKitUsbPowerForDriver. SceUsbServ related.
0x89D ? 0x6F586D1A sceSysconConfigLEDForDriver
0x89E ? 0x9CA6EB70 ScePower related
0x89F ? 0xCB41B531 ??
0x8A0 ?0x4? 0x9070F139 sceSysconGetBatteryTempForDriver. Replaced by Syscon command 0x981 on Syscon version > 0x70503.
0x8A1 ?0x3B or 0x4? 0x00A65FC1 Replaced by Syscon command 0x982 on Syscon version > 0x70503. ScePower related.
0x8A2 0x2 0x0826BA07 sceSysconGetBatteryElecForDriver. Replaced by Syscon command 0x983 on Syscon version > 0x70503.
0x8A3 ?0x4? 0xB841C141 sceSysconGetBatteryLifeTimeForDriver. Replaced by Syscon command 0x984 on Syscon version > 0x70503.
0x8A4 ?0x4? 0x91D3B7A3 sceSysconGetBatterySOHForDriver. Replaced by Syscon command 0x985 on Syscon version > 0x70503.
0x8B0 ? 0x2CEF078E / 0x4946538A sceSysconBatteryStartBLModeForDriver. Replaced by Syscon command 0x9B0 on Syscon version > 0x70503. Since FW 0.940, it is also sceSysconEnableHibernateIOForDriver independently of Syscon version.
0x8B1 ? 0xE4AE7852 sceSysconBatteryStopBLModeForDriver. Replaced by Syscon command 0x9B1 on Syscon version > 0x70503.
0x8B2 ? 0xE4F29744 sceSysconBatterySetBLCommandForDriver. Replaced by Syscon command 0x9B2 on Syscon version > 0x70503.
0x8B3 ? 0x74B2AB55 sceSysconBatteryExecBLCommandForDriver. Replaced by Syscon command 0x9B3 on Syscon version > 0x70503.
0x8B4 ? 0x448DAFF1 sceSysconBatteryReadBLCommandForDriver. Replaced by Syscon command 0x9B4 on Syscon version > 0x70503.
0x8C0 ? 0xC6A2C9EF sceSysconCtrlManualChargeModeForDriver
0x8C3 ? ?? sceSysconCtrlSupplyCurrentAcForDriver
0x8C4 ? ?? sceSysconCtrlSupplyCurrentUsbForDriver
0x8C5 ?0x2 or 0? 0x3274A925 ??. SceUsbServ and SceUsbEtherSmsc related.
0x8C6 ? 0xDFB024C4 sceSysconAbbySyncForDriver. SceSblUpdateMgr related
0x8C7 ? 0x87FF8041 ??
0x8C8 ? 0x7BFA95DA ??
0x8C9 ? 0x451C1662 ??
0x8CA ? 0x79074DE4 ??
0x8CB ? 0x7D25F6D2 ??
0x8CC ? 0xD2ADABCA ??
0x8CE 0x10 0x3B354824 sceSysconGetTemperatureLog
0x8CF 0 0x3843D657 sceSysconClearTemperatureLog. Sends 2 bytes to syscon.
0x8D0 ? 0xF87679EE ??
0x900 ?0x4? 0xC562AF3A sceSysconGetBatteryRemainCapacityForDriver. Replaces Syscon command 0x802 on Syscon version > 0x70503.
0x901 0x4 0x03F11220 sceSysconGetBatteryVoltForDriver. Replaces Syscon command 0x803 on Syscon version > 0x70503.
0x902 ?0x4? 0xAD0A8275 sceSysconGetBatteryLifePercentForDriver
0x903 0x2 0x26F9D729 sceSysconGetBatteryRemainLevelForDriver. Added on a FW higher than 2.50 and Syscon version >= 0x1040105.
0x904 ? 0x9ADC9936 sceSysconGetBatteryCalibDataForDriver
0x910 ?
0x911 ?
0x912 ?
0x913 ?
0x914 ?
0x915 ?
0x916 ?
0x917 ?
0x932 ?
0x944 ?
0x945 ?
0x952 ? Uses string "PC" then "TUV".
0x953 ?
0x954 ?
0x961 ?
0x962 ?
0x963 ?
0x964 ?
0x965 ?
0x966 ?
0x967 ?
0x968 ?
0x969 ?
0x980 0x6 0x68E0031E sceSysconGetBatteryVersionForDriver. Replaces Syscon command 0x882 on Syscon version > 0x70503.
0x981 ?0x4? 0x9070F139 sceSysconGetBatteryTempForDriver. Replaces Syscon command 0x8A0 on Syscon version > 0x70503.
0x982 ?0x4? 0x00A65FC1 Replaces Syscon command 0x8A1 on Syscon version > 0x70503. ScePower related.
0x983 0x2 0x0826BA07 sceSysconGetBatteryElecForDriver. Replaces Syscon command 0x8A2 on Syscon version > 0x70503.
0x984 ?0x4? 0xB841C141 sceSysconGetBatteryLifeTimeForDriver. Replaces Syscon command 0x8A3 on Syscon version > 0x70503.
0x985 ?0x4? 0x91D3B7A3 sceSysconGetBatterySOHForDriver. Replaces Syscon command 0x8A4 on Syscon version > 0x70503.
0x989 ? 0x87DA378D sceSysconBatterySWResetForDriver
0x98A ?0x4? 0xF93CF833 sceSysconGetBatteryFullCapacityForDriver
0x98B ? 0xE1885F68 ??
0x98C ?0x4? 0xCD73079D sceSysconGetBatteryCycleCountForDriver
0x9B0 ? 0x2CEF078E sceSysconBatteryStartBLModeForDriver. Replaces Syscon command 0x8B0 on Syscon version > 0x70503.
0x9B1 ? 0xE4AE7852 sceSysconBatteryStopBLModeForDriver. Replaces Syscon command 0x8B1 on Syscon version > 0x70503.
0x9B2 ? 0xE4F29744 sceSysconBatterySetBLCommandForDriver. Replaces Syscon command 0x8B2 on Syscon version > 0x70503.
0x9B3 ? 0x74B2AB55 sceSysconBatteryExecBLCommandForDriver. Replaces Syscon command 0x8B3 on Syscon version > 0x70503.
0x9B4 ? 0x448DAFF1 sceSysconBatteryReadBLCommandForDriver. Replaces Syscon command 0x8B4 on Syscon version > 0x70503.
0xA00 0x0 ??
0xA82 ? 0x7BAFE083 ??
0x1080 ?0x0 or 0x2? 0x81A6060D sceSysconNvsSetRunModeForDriver
0x1081 ?0x0 or 0x2? 0x2EC6D55D sceSysconNvsSetUnkModeForDriver
0x1082 ? 0xACAFA2B8 sceSysconNvsReadDataForDriver
0x1083 ?0x2? 0x10C9657A sceSysconNvsWriteDataForDriver
0x1100 0x4 0xD2F456DC sceSysconGetErnieDLVersionForDriver
0x1101 0x4
0x1180 ? 0x9B00BC7F sceSysconUpdaterSetSegmentForDriver
0x1181 ? 0x356B9696, 0x734544E4 sceSysconUpdaterLoadSegmentForDriver, sceSysconUpdaterLoadSegment2ForDriver
0x1182 ? 0x69AD76E4 sceSysconUpdaterExecProgrammingForDriver
0x1183 ? 0xB487C2FB sceSysconUpdaterSetRunModeForDriver
0x1184 ? 0xC7747A63 sceSysconUpdaterExecFinalizeForDriver
0x1185 ? 0xCBA836FF SceSysconForDriver_CBA836FF
0x1300 0x8 0xCE48E8EB sceSysconGetConfigStorageInfoForDriver
0x1310 0x1 0x351946B0 ??
0x1382 ? 0xA4968B8C sceSysconBeginConfigstorageTransactionForDriver
0x1383 ? 0xFCC3E8EE sceSysconEndConfigstorageTransactionForDriver
0x1384 ? 0x7B9B3617 sceSysconCommitConfigstorageTransactionForDriver
0x1385 ? 0x89C5CFD6 sceSysconLoadConfigstorageScriptForDriver
0x1386 (called from ARM Kernel but not implemented in Syscon FW) ? 0xCC6F90A8 sceSysconVerifyConfigstorageScriptForDriver
0x1392 ? 0xFD65FFCB ??
0x1393 ? 0x02350352 ??
0x1394 ? 0x7DE84CE3 ??
0x2080 ? 0x44A173F5 sceSysconJigOpenPortForDriver
0x2081 ? 0x483FAE05 sceSysconJigClosePortForDriver
0x2082 ? 0xD24BF916 sceSysconJigSetConfigForDriver
0x2083 ?
0x2084 ?
0x2085 ?

Callbacks

All the following exported functions have this function prototype: int sceSysconSet...Callback(void (*func)(int enable, void *argp), void *argp);.

Callback name Callback setter function State getter function Callback setter caller Comments
SYSCON_CB_ACC #sceSysconSetAccCallbackForDriver #SceSysconForDriver_B9EA2FA8 SceUsbServ
SYSCON_CB_MULTI_CN_OTG #sceSysconSetMultiCnOtgCallbackForDriver NA SceUsbServ
SYSCON_CB_MINI_USB_OTG #sceSysconSetMiniUsbOtgCallbackForDriver NA SceUsbServ
SYSCON_CB_ALARM #sceSysconSetAlarmCallbackForDriver NA ScePower
? #SceSysconForDriver_18A6F4D9 #SceSysconForDriver_C0F215B7 No use case seen.
?SYSCON_CB_HEADPHONE? #SceSysconForDriver_DE613081 #SceSysconForDriver_C3504ADE SceHpremote
?SYSCON_CB_MICROPHONE? #SceSysconForDriver_63352A39 NA SceHpremote
?SYSCON_CB_REMOTE? #SceSysconForDriver_35E1689F #SceSysconForDriver_ACC7F71E SceHpremote
SYSCON_CB_LOW_BATTERY #sceSysconSetLowBatteryCallbackForDriver #sceSysconIsLowBatteryForDriver ScePower
SYSCON_CB_THERMAL_ALERT #sceSysconSetThermalAlertCallbackForDriver #SceSysconForDriver_50CAE242 ScePower
SYSCON_CB_LOW_BATTERY_INIHIBIT_UPDATE_REBOOT #sceSysconSetLowBatteryInhibitUpdateRebootCallbackForDriver #sceSysconIsLowBatteryInhibitUpdateRebootForDriver ScePower
SYSCON_CB_LOW_BATTERY_INIHIBIT_UPDATE_DOWNLOAD #sceSysconSetLowBatteryInhibitUpdateDownloadCallbackForDriver #sceSysconIsLowBatteryInhibitUpdateDownloadForDriver ScePower
SYSCON_CB_BATTERY_ONLINE #SceSysconForDriver_80D6E061 #SceSysconForDriver_27758A64 ScePower
SYSCON_CB_RESUME_REQUEST #SceSysconForDriver_9F8340FF #SceSysconForDriver_A57B5433 ScePower
? #SceSysconForDriver_2D471528 #SceSysconForDriver_03C50DC3 ScePower Very similar to SYSCON_CB_LOW_BATTERY.
? #SceSysconForDriver_7682FE69 #SceSysconForDriver_4A184B7C No use case seen. Related to battery.
? #SceSysconForDriver_E0D52DF0 #SceSysconForDriver_ACEE1C70 No use case seen. Related to battery.
? #SceSysconForDriver_229A07C2 #SceSysconForDriver_B832B72C No use case seen.
? #SceSysconForDriver_474A9EA7 #SceSysconForDriver_769F9AC4 No use case seen.
? #SceSysconForDriver_129EA022 #SceSysconForDriver_BFDA5590 ScePower
SYSCON_CB_ALARM_TIMER #SceSysconForDriver_8351526D #SceSysconForDriver_86BAAF7D SceRtc
? #SceSysconForDriver_2E4BA4B8 #SceSysconForDriver_29CF4335 No use case seen. Used in SceSblPostSsMgr.
? #SceSysconForDriver_4E88B4D9 #SceSysconForDriver_4BC63A40 No use case seen. Used in SceSblPostSsMgr.
? #SceSysconForDriver_376CCCB8 #SceSysconForDriver_99A254A9 No use case seen.
? #SceSysconForDriver_3BAAC8A9 #SceSysconForDriver_9A4F4B7C No use case seen.
? #SceSysconForDriver_85E5DEBF #SceSysconForDriver_63B14156 No use case seen.
? #SceSysconForDriver_14730196 NA No use case seen.
? #SceSysconForDriver_C442D0BE #SceSysconForDriver_9F4042F8 No use case seen.
? #SceSysconForDriver_61AE3970 #SceSysconForDriver_C50568E9 No use case seen.
? #SceSysconForDriver_423D0C58 NA No use case seen.
? #SceSysconForDriver_154676F1 NA No use case seen.

See also SilverSpring's PSP Syscon callbacks enum and PSPSDK power callbacks enum.

Retrieved from "http://wiki.henkaku.xyz/index.php?title=SceSyscon&oldid=20879"