PUP: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
No edit summary
Tag: Undo
(Remove Bert naming assumptions.)
 
(22 intermediate revisions by 2 users not shown)
Line 1: Line 1:
PUP (Playstation Update Package) files are update archives for the PS3, PSVita and PS4.
PUP (Playstation Update Package) files are update archives for the PS3, PS Vita and PS4.


= PUP Structure =
= PUP Structure =


A good resource on the PUP structure can be found [https://www.psdevwiki.com/ps3/Playstation_Update_Package_(PUP) HERE].
A good resource on the PUP structure can be found [https://www.psdevwiki.com/ps3/Playstation_Update_Package_(PUP) here].


= Update .PKG files =
= Update .PKG files =
Line 19: Line 19:
! Offset !! Size !! Description
! Offset !! Size !! Description
|-
|-
| 0x0 || 0x4 || Version. 4 for PSVita Update Packages.
| 0x0 || 0x4 || Version. 4 for PS Vita Update Packages.
|-
|-
| 0x4 || 0x4 || [[PUP#Type|Type]]
| 0x4 || 0x4 || [[PUP#Type|Type]]
Line 25: Line 25:
| 0x8 || 0x4 || [[PUP#Flag|Flag]]
| 0x8 || 0x4 || [[PUP#Flag|Flag]]
|-
|-
| 0xC || 0x4 || Target Hardware Info. For Ernie it is [[KBL Param#Hardware Info]], for Grover it is ES revision, for Motion it is some hardware version (6, 7), for Touch it is Touchscreen hardware version (0x800A).
| 0xC || 0x4 || Target Hardware Info. For Ernie, Bic, Abby it is [[KBL Param#Hardware Info]], for Grover it is ES revision, for Motion it is some hardware version (6, 7), for Touch it is Touchscreen hardware version (0x800A).
|-
|-
| 0x10 || 0x8 || Update Version (System Firmware Version or Ernie Update Version)
| 0x10 || 0x8 || Update Version (System Firmware Version or Ernie Update Version). For Bic, Abby, it is <source lang="C">((battery_HWinfo << 0x10) | battery_FWinfo)</source>.
|-
|-
| 0x18 || 0x8 || Final size (decompressed)
| 0x18 || 0x8 || Final size (decompressed)
Line 37: Line 37:
| 0x2C || 0x4 || Platform: 0 all platforms accepted, 1 Dolce (PSTV), 0x10000000 Test / Tool, 0x20000000 DEX, 0x40000000 CEX
| 0x2C || 0x4 || Platform: 0 all platforms accepted, 1 Dolce (PSTV), 0x10000000 Test / Tool, 0x20000000 DEX, 0x40000000 CEX
|-
|-
| 0x30 || 0x4 || ?
| 0x30 || 0x4 || Downgrade barrier level. Before System Software version 1.692.000, always set to 0. Since System Software version 1.692.000, always set to 1 in os0 and slb2 SPKGs. Since FW 1.692.000 (but not in 1.692.000downversion) a check has been added in update_service_sm for this member.
|-
|-
| 0x34 || 0x4 || ?
| 0x34 || 0x4 || ?
Line 108: Line 108:
! Type !! Description
! Type !! Description
|-
|-
| 0x0 ||  
| 0x0 || Reserved type.
|-
|-
| 0x1 || <code>os0</code> [[Partitions|partition]]
| 0x1 || FAT16 image, <code>os0</code> [[Partitions|partition]]
|-
|-
| 0x2 ||  
| 0x2 || Error 0x800F0202 in InspectSpackage.
|-
|-
| 0x3 ||  
| 0x3 || Maybe permissions related to type 0x15.
|-
|-
| 0x4 || Permissions related to <code>vs0</code> [[Partitions|partition]] patch update TAR archive (type 0x16)
| 0x4 || Permissions related to <code>vs0</code> [[Partitions|partition]] patch update TAR archive (type 0x16)
|-
|-
| 0x5 ||  
| 0x5 || Error 0x800F0202 in InspectSpackage.
|-
|-
| 0x6 ||  
| 0x6 || Error 0x800F0202 in InspectSpackage.
|-
|-
| 0x7 ||  
| 0x7 || Error 0x800F0202 in InspectSpackage.
|-
|-
| 0x8 || [[Syscon Update]] (0x9A54 run mode)
| 0x8 || [[Syscon Update]] (0x9A54 run mode)
|-
|-
| 0x9 || [[SLB2]] [[Boot Sequence|bootloaders]]
| 0x9 || [[SLB2]] image, [[Boot Sequence|secure bootloaders]] [[Partitions|partition]]
|-
|-
| 0xA || <code>vs0</code> [[Partitions|partition]]
| 0xA || FAT16 image, <code>vs0</code> [[Partitions|partition]]
|-
|-
| 0xB || Cp Firmware
| 0xB || Cp Firmware
Line 136: Line 136:
| 0xD || Bbmc related
| 0xD || Bbmc related
|-
|-
| 0xE ||  
| 0xE || Error 0x800F0202 in InspectSpackage.
|-
|-
| 0xF || Motion Firmware
| 0xF || Motion Firmware
Line 144: Line 144:
| 0x11 || Touch Config
| 0x11 || Touch Config
|-
|-
| 0x12 || Bic Firmware (Battery IC)
| 0x12 || Bic Firmware (Battery IC) ?for Bic?
|-
|-
| 0x13 || Bic Firmware (Battery IC)
| 0x13 || Bic Firmware (Battery IC) ?for [[Abby]]?
|-
|-
| 0x14 || [[Syscon Update]] (0x3665 run mode)
| 0x14 || [[Syscon Update]] (0x3665 run mode)
|-
|-
| 0x15 ||  
| 0x15 || Maybe TAR archive, maybe patch update for <code>os0</code> [[Partitions|partition]].
|-
|-
| 0x16 || TAR archive, patch update for <code>vs0</code> [[Partitions|partition]]
| 0x16 || TAR archive, patch update for <code>vs0</code> [[Partitions|partition]]
|-
|-
| 0x17 || <code>sa0</code> [[Partitions|partition]]. For Tool Rev 9, "device stores manufacturing image" according to logs.
| 0x17 || FAT16 image, <code>sa0</code> [[Partitions|partition]]. For Tool Rev 9, "device stores manufacturing image" according to logs.
|-
|-
| 0x18 || <code>pd0</code> [[Partitions|partition]]
| 0x18 || <code>pd0</code> [[Partitions|partition]]
Line 160: Line 160:
| 0x19 || [[Syscon Update]] (0xC5E7 run mode)
| 0x19 || [[Syscon Update]] (0xC5E7 run mode)
|-
|-
| 0x1A ||  
| 0x1A || Error 0x800F0202 in InspectSpackage.
|-
|-
| 0x1B || [[PSP Emulator]] lists
| 0x1B || [[PSP Emulator]] lists. This type of SPKG is usually obtained from network and not contained in PUP.
|}
|}


==== Subroutines ====
==== Subroutines ====


The SPKG Type determines which decryption routine to use in [[SceSblSsUpdateMgr]]. There is a truth table to determine which ID can be handled by which decryption function. To see how this table is used, check out the [[Updater#Update_Package_Decryption_Code|example code]] for decrypting packages.
The SPKG Type determines which decryption routine to use in [[SceSblUpdateMgr]]. There is a truth table to determine which ID can be handled by which decryption function. To see how this table is used, check out the [[Updater#Update_Package_Decryption_Code|example code]] for decrypting update packages.
 
Tables for allowed for each operation.
 
No to return 0x800F0202.


{| class="wikitable"
{| class="wikitable"
|-
|-
! Type !! Func 1? !! Func 2? !! Func 3?
! Type !! InspectSpackage !! UpdateSpackage !! ExtractSpackage
|-
|-
| 0x0 || No || No || No
| 0x0 || No || No || No
Line 234: Line 238:
SCEWM is a file embedded in the PUP to serve as a watermark.
SCEWM is a file embedded in the PUP to serve as a watermark.


PUP Watermark is present since at least FW 0.931.010. It was not present on FW 0.902.000. Nevertheless, on FW 0.931.010 OS the PUP watermark is never verified.
PUP Watermark is present since at least FW 0.931.010. It was not present on FW 0.902.000. Nevertheless, on FW 0.931.010 the PUP watermark is never verified.


The SCEWM file is composed of 2 parts:
The SCEWM file is composed of 2 parts:
Line 280: Line 284:
It is RSA2048 of SHA256 of the PUP Header Digest. It is verified with SCEWM RSA public key.
It is RSA2048 of SHA256 of the PUP Header Digest. It is verified with SCEWM RSA public key.


=== Message ===
=== Watermark Message ===


==== Default Watermark Message ====
==== Default Watermark Message ====


For PUP not bound to a developer, not downloaded on DevNet, such as prototype and retail PUP, the watermark has a default message.
For external PUPs not bound to any developer, nor downloaded from DevNet, the watermark has the default message.


0.931-3.73:
Format for System Software versions 0.931.010-3.740.011:
<pre>
<pre>
desc: default watermark
desc: default watermark
Line 292: Line 296:
timestamp: YYYYMMDD_HHmmSS_JST
timestamp: YYYYMMDD_HHmmSS_JST
host: build_machine
host: build_machine
</pre>
==== Dummy Watermark Message ====
For internal PUPs not bound to any developer, nor downloaded from DevNet, the watermark has the dummy message.
Here '??' represents a decimal number starting from '02'.
Format for watermark id 0x71:
<pre>
desc: dummy watermark
id: hoshi
timestamp: DDD MMM DD HH:mm:SS JST YYYY
host: p2bld-l??.build.rd.scei.sony.co.jp
</pre>
Format for watermark id 0x72:
<pre>
desc: dummy watermark
id: hoshi
timestamp: Fri Aug 16 07:36:14 JST 2019
host: p2bld-vl??.build.rd.scei.sony.co.jp
</pre>
Format for watermark id 0xAC:
<pre>
desc: dummy watermark
HH:mm:SS JST YYYY
host: p2bld-l??.build.rd.scei.sony.co.jp
id: hoshi
timestamp: DDD MMM DD HH:mm:SS JST YYYY
host: p2bld-l??.build.rd.scei.sony.co.jp
</pre>
</pre>


==== DevNet Watermark Message ====
==== DevNet Watermark Message ====


The message is generated on developer's demand by DevNet server, written to the PUP, then the PUP download starts. The message syntax has changed with DevNet revisions.
For external PUPs bound to a company, downloaded from DevNet, the watermark has the DevNet message.
 
The watermark message is generated on developer's demand by DevNet server, written to the PUP, then the PUP download starts. The message syntax has changed with DevNet revisions. Old message was seen as early as 2011-07-29 and was replaced by a new message at some time between 2016-04-15 and 2018-04-23 after that SilicaAndPina leaked some DevKit/TestKit PS Vita PUP files.


The message is totally independant of the PUP. The same PUP (for example PSVita FW 0.945 PUP) downloaded from DevNet in 2011 and in 2018 has different message syntax.
The watermark message is independant of the PUP. The same PUP (for example PS Vita 0.945.050 PUP) downloaded from DevNet in 2011 and in 2018 has different watermark message syntax but apart from Watermark (and maybe Additional Signature) is identical.


Here 'x' represents an actual character, which I hide for confidentiality.
Here 'x' represents an actual character, hidden here for confidentiality.


===== Old message (2011-02) =====
===== Old DevNet Watermark Message =====


<pre>
<pre>
Line 313: Line 351:
</pre>
</pre>


===== Recent message (2018-04) =====
===== New DevNet Watermark Message =====


<pre>
<pre>

Latest revision as of 17:40, 6 January 2024

PUP (Playstation Update Package) files are update archives for the PS3, PS Vita and PS4.

PUP Structure

A good resource on the PUP structure can be found here.

Update .PKG files

Most of the files in the update PUP are .pkg files, a sort of Certified File.

Each component of the update is broken up into multiple parts, then optionally compressed, and finally encrypted into the PKG.

Package Header

Right after the Certified File header (usually at offset 0x300 or 0x400) is the update package header that provides information for piecing the component back together. The contents of this header is as follows:

Offset Size Description
0x0 0x4 Version. 4 for PS Vita Update Packages.
0x4 0x4 Type
0x8 0x4 Flag
0xC 0x4 Target Hardware Info. For Ernie, Bic, Abby it is KBL Param#Hardware Info, for Grover it is ES revision, for Motion it is some hardware version (6, 7), for Touch it is Touchscreen hardware version (0x800A).
0x10 0x8 Update Version (System Firmware Version or Ernie Update Version). For Bic, Abby, it is
((battery_HWinfo << 0x10) | battery_FWinfo)
.
0x18 0x8 Final size (decompressed)
0x20 0x8 Decrypted size
0x28 0x4 Flags requirements: 0 normal, 1 QA flag (sceQafMgrIsAllowQAUpdateForDriver) required, 2 manufacturing mode required
0x2C 0x4 Platform: 0 all platforms accepted, 1 Dolce (PSTV), 0x10000000 Test / Tool, 0x20000000 DEX, 0x40000000 CEX
0x30 0x4 Downgrade barrier level. Before System Software version 1.692.000, always set to 0. Since System Software version 1.692.000, always set to 1 in os0 and slb2 SPKGs. Since FW 1.692.000 (but not in 1.692.000downversion) a check has been added in update_service_sm for this member.
0x34 0x4 ?
0x38 0xC ?
0x3C 0x4 ?
0x40 0x8 ?
0x48 0x8 ?
0x50 0x8 Offset
0x58 0x8 Size
0x60 0x8 Chunk No (part index)
0x68 0x8 Total Chunks (total parts)
0x70 0x8 ?
0x78 0x8 ?

Flag

These bitflags indicate which products can install the package.

Flag Description
0x1
0x2
0x4
0x8
0x10
0x20
0x40
0x80
0x100
0x200
0x400
0x800
0x4000
0x8000

Type

The Type is used to identify the component of the update.

Type Description
0x0 Reserved type.
0x1 FAT16 image, os0 partition
0x2 Error 0x800F0202 in InspectSpackage.
0x3 Maybe permissions related to type 0x15.
0x4 Permissions related to vs0 partition patch update TAR archive (type 0x16)
0x5 Error 0x800F0202 in InspectSpackage.
0x6 Error 0x800F0202 in InspectSpackage.
0x7 Error 0x800F0202 in InspectSpackage.
0x8 Syscon Update (0x9A54 run mode)
0x9 SLB2 image, secure bootloaders partition
0xA FAT16 image, vs0 partition
0xB Cp Firmware
0xC Motion Firmware
0xD Bbmc related
0xE Error 0x800F0202 in InspectSpackage.
0xF Motion Firmware
0x10 Touch Firmware
0x11 Touch Config
0x12 Bic Firmware (Battery IC) ?for Bic?
0x13 Bic Firmware (Battery IC) ?for Abby?
0x14 Syscon Update (0x3665 run mode)
0x15 Maybe TAR archive, maybe patch update for os0 partition.
0x16 TAR archive, patch update for vs0 partition
0x17 FAT16 image, sa0 partition. For Tool Rev 9, "device stores manufacturing image" according to logs.
0x18 pd0 partition
0x19 Syscon Update (0xC5E7 run mode)
0x1A Error 0x800F0202 in InspectSpackage.
0x1B PSP Emulator lists. This type of SPKG is usually obtained from network and not contained in PUP.

Subroutines

The SPKG Type determines which decryption routine to use in SceSblUpdateMgr. There is a truth table to determine which ID can be handled by which decryption function. To see how this table is used, check out the example code for decrypting update packages.

Tables for allowed for each operation.

No to return 0x800F0202.

Type InspectSpackage UpdateSpackage ExtractSpackage
0x0 No No No
0x1 Yes Yes No
0x2 No No No
0x3 No No Yes
0x4 No No Yes
0x5 No No No
0x6 No No No
0x7 No No No
0x8 Yes Yes No
0x9 Yes Yes No
0xA Yes Yes Yes
0xB Yes Yes No
0xC Yes Yes No
0xD Yes Yes No
0xE No No No
0xF Yes Yes No
0x10 Yes Yes No
0x11 Yes Yes No
0x12 Yes Yes No
0x13 Yes Yes No
0x14 Yes Yes No
0x15 Yes Yes Yes
0x16 Yes Yes Yes
0x17 Yes Yes Yes
0x18 Yes Yes No
0x19 Yes Yes No
0x1A No No No
0x1B No No Yes

SCEWM

SCEWM is a file embedded in the PUP to serve as a watermark.

PUP Watermark is present since at least FW 0.931.010. It was not present on FW 0.902.000. Nevertheless, on FW 0.931.010 the PUP watermark is never verified.

The SCEWM file is composed of 2 parts:

  • SCEWM header: size 0x20 bytes.
  • SCEWM body: size = file_size(usually 0x1000) - header_size(0x20). This part is encrypted.

Header

This is a watermark for PUPs. For development PUPs, the Issue ID is unique to the company/organization the PUP is issued to.

Offset Size Description
0x0 0x6 Magic ('SCEWM\0')
0x6 0x2 ?Version? (ex: 00 01)
0x8 0x4 Unknown (ex: 01 00 00 00)
0xC 0x4 File Size (usually 0x1000)
0x10 0x4 Message length (ex: 0xD9, 0x5A)
0x14 0x4 Unknown (ex: 01 00 00 00)
0x18 0x4 Unknown (ex: 01 00 00 00)
0x1C 0x4 Unknown (ex: 01 00 00 00)

The message length for prototype/retail PUP is almost always 0x5A, see below why.

Body

The body is encrypted using AES128CBC with key and iv from update_service_sm.self.

After decryption, the body is composed of 3 parts:

  • 0x100 bytes: RSA2048 signature of SHA256 of the PUP Header Digest. It is verified with SCEWM RSA public key. The PUP Header is independant of the watermark and so is the RSA signature.
  • 0xDE0 bytes: plaintext ASCII message (unique message per DevNet issue ID or build time).
  • 0x100 bytes: RSA2048 signature of SHA256 of 0xF00 bytes (SCEWM header + decrypted PUP Header Digest signature + decrypted message). It is verified with SCEWM RSA public key.

PUP Header Digest RSA Signature

It is RSA2048 of SHA256 of the PUP Header Digest. It is verified with SCEWM RSA public key.

Watermark Message

Default Watermark Message

For external PUPs not bound to any developer, nor downloaded from DevNet, the watermark has the default message.

Format for System Software versions 0.931.010-3.740.011:

desc: default watermark
id: build_team
timestamp: YYYYMMDD_HHmmSS_JST
host: build_machine

Dummy Watermark Message

For internal PUPs not bound to any developer, nor downloaded from DevNet, the watermark has the dummy message.

Here '??' represents a decimal number starting from '02'.

Format for watermark id 0x71:

desc: dummy watermark
id: hoshi
timestamp: DDD MMM DD HH:mm:SS JST YYYY
host: p2bld-l??.build.rd.scei.sony.co.jp

Format for watermark id 0x72:

desc: dummy watermark
id: hoshi
timestamp: Fri Aug 16 07:36:14 JST 2019
host: p2bld-vl??.build.rd.scei.sony.co.jp

Format for watermark id 0xAC:

desc: dummy watermark
HH:mm:SS JST YYYY
host: p2bld-l??.build.rd.scei.sony.co.jp
id: hoshi
timestamp: DDD MMM DD HH:mm:SS JST YYYY
host: p2bld-l??.build.rd.scei.sony.co.jp

DevNet Watermark Message

For external PUPs bound to a company, downloaded from DevNet, the watermark has the DevNet message.

The watermark message is generated on developer's demand by DevNet server, written to the PUP, then the PUP download starts. The message syntax has changed with DevNet revisions. Old message was seen as early as 2011-07-29 and was replaced by a new message at some time between 2016-04-15 and 2018-04-23 after that SilicaAndPina leaked some DevKit/TestKit PS Vita PUP files.

The watermark message is independant of the PUP. The same PUP (for example PS Vita 0.945.050 PUP) downloaded from DevNet in 2011 and in 2018 has different watermark message syntax but apart from Watermark (and maybe Additional Signature) is identical.

Here 'x' represents an actual character, hidden here for confidentiality.

Old DevNet Watermark Message
# PUP watermark data that contain DevNet user id, org name, company name, date of PUP downloaded and host IP address
User id:xxxxxx
Org name:xxxxxxxxxxxxxx
Company name:xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Date PUP downloaded:YYYY-MM-DD HH:mm
Host IP address:xxx.xxx.xxx.xxx
New DevNet Watermark Message
# PUP watermark data contain a serial_number that associates with the user who download this PUP
# Provide the serial number below to the DevNet development team to get user and org details.
PUP serial number:xxxxxxxx

SCEWM RSA Signature

It is RSA2048 of SHA256 of 0xF00 bytes: the SCEWM header + the decrypted SCEWM body. It is verified with SCEWM RSA public key.

Security

When comparing the same PUP signed for two different issue IDs, we can notice only 2 differences:

  • sometimes the message length in SCEWM header
  • the SCEWM encrypted unique data: the blocks of the message that differ and the RSA signature of the watermark

SCEAS

This file contains Additional Signature(s) (A.S.) necessary for validation of the PUP.

It was added on FW 0.996, probably for security reasons. This file is missing inside the Prototype DevKit PUP 0.945.040 (and all the pre-0.996 PUPs).

The SCEAS file is composed of 2 parts:

  • SCEAS header: size 0x20 bytes.
  • SCEAS body: size = file_size(usually 0x1000) - header_size(0x20). This part is encrypted.

Header

Offset Size Description
0x0 0x6 Magic ('SCEAS\0')
0x6 0x2 ?Version? (ex: 00 01)
0x8 0x4 Unknown (ex: 01 00 00 00)
0xC 0x4 File Size (usually 0x400)
0x10 0x4 Unknown (ex: 01 00 00 00)
0x14 0x4 Unknown (ex: 01 00 00 00)
0x18 0x4 Unknown (ex: 01 00 00 00)
0x1C 0x4 Certainly padding. (ex: 00 00 00 00)

Body

The body is encrypted using AES128CBC with key and iv from update_service_sm.self.

After decryption, the body is composed of 3 parts:

  • 0x100 bytes: RSA2048 signature of something unknown (to reverse). It is verified with SCEAS RSA public key.
  • 0x1E0 bytes: zeroes, maybe area for more than one signature, or just padding for decryption.
  • 0x100 bytes: RSA2048 signature of SHA256 of ?0x300 bytes (SCEAS header + decrypted unknown signature)?. It is verified with SCEAS RSA public key.