SceSdif: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
 
(49 intermediate revisions by 4 users not shown)
Line 1: Line 1:
SceSdif is a kernel module that is primary responsible for communicating with SD devices. This includes onboard eMMC, game card MMC, wi-fi/bluetooth SDIO devices.
Sdif likely stands for Storage Device InterFace. SceSdif is a kernel module that is primary responsible for communicating with SD devices. This includes eMMC (internal storage), gamecard MMC, SD/micro SD card, Wlan/Bt SDIO devices. Memory Card is handled by [[SceMsif]] instead as it uses an authentication security layer.
To communicate with particular device SceSdif module uses device index (sd_ctx_index)
 
To communicate with a particular device SceSdif module uses device index (sd_ctx_index).


{| class="wikitable"
{| class="wikitable"
|-
|-
! Device Index !! Type !! Description
! Device Index !! Device !! Device Type !! Description
|-
|-
| 0 || MMC || onboard eMMC
| 0 || Internal || MMC || eMMC (internal storage)
|-
|-
| 1 || MMC || game card
| 1 || Game card || MMC/SD || Gamecard/?SD card?
|-
|-
| 2 || SDIO || wi-fi/bluetooth
| 2 || Wlan/Bt || SDIO || Wlan/Bt
|-
| 3 || Micro SD || SD || Used by [[SceSdstor]] "usd" device. Related to error 0x80320013 on release FW 3.600.011 but maybe used on old FW versions.
|}
|}


There is one more index value that closely correlates with device index.
There is one more index value that closely correlates with Device Index. This is speculated to be Device Type Index. It is initialized by internal subroutine that does preinitialization (cmd0, cmd8, cmd5_sdio, cmd55, acmd41). Value is typically stored in sd_context_data structure in field dev_type_idx.
This is speculated to be device type index. It is initialized by internal subroutine that does preinitialization (cmd0, cmd8, cmd5_sdio, cmd55, acmd41).
Value is typically stored in sd_context_data structure in field dev_type_idx.


{| class="wikitable"
{| class="wikitable"
! Device Type Index !! Description
! Device Type Index !! Device Type !! Associated SceSdif init function
|-
|-
| 0 || unknown (invalid ?)
| 0 || Unknown (invalid?) || None?
|-
|-
| 1 || MMC
| 1 || MMC || [[#get_sd_context_part_validate_mmc|get_sd_context_part_validate_mmc]]
|-
|-
| 2 || SD
| 2 || SD || [[#get_sd_context_part_validate_sd|get_sd_context_part_validate_sd]]
|-
|-
| 3 || SDIO
| 3 || SDIO || [[#get_sd_context_part_validate_sdio|get_sd_context_part_validate_sdio]]
|}
|}
Device type index will be validated when sd_context_part* will be aquired through these functions:
*[[SceSdif#get_sd_context_part_validate_mmc|get_sd_context_part_validate_mmc]] - device type index must be 1
*[[SceSdif#get_sd_context_part_validate_sd|get_sd_context_part_validate_sd]] - device type index must be 2
*[[SceSdif#get_sd_context_part_validate_sdio|get_sd_context_part_validate_sdio]] - device type index must be 3


== Module ==
== Module ==


=== Known NIDs ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! Name !! World !! Privilege !! NID
! Version !! World !! Privilege
|-
|-
| 1.69 || SceSdif || Non-secure || Kernel || 0xCA882EE3
| 0.990.000-3.740.011 || Non-secure || Kernel
|-
| 3.60 || SceSdif || Non-secure || Kernel || 0x2E7C52F7
|-
| 3.65 || SceSdif || Non-secure || Kernel || 0x285023ED
|}
|}


Line 57: Line 47:
! Version !! Name !! World !! Visibility !! NID
! Version !! Name !! World !! Visibility !! NID
|-
|-
| 1.69-3.65 || [[SceSdif#SceSdifForDriver|SceSdifForDriver]] || Non-secure || Kernel || 0x96D306FA
| 0.990.000-3.740.011 || [[SceSdif#SceSdifForDriver|SceSdifForDriver]] || Non-secure || Kernel || 0x96D306FA
|}
|}


Line 70: Line 60:
| 0x0040 || 0x24C0 || sd_context_global (eMMC)
| 0x0040 || 0x24C0 || sd_context_global (eMMC)
|-
|-
| 0x2500 || 0x24C0 || sd_context_global (game card)
| 0x2500 || 0x24C0 || sd_context_global (gamecard)
|-
|-
| 0x49C0 || 0x24C0 || sd_context_global (wlan/bt)
| 0x49C0 || 0x24C0 || sd_context_global (wlan/bt)
Line 76: Line 66:
| 0x6E80 || 0x398 || sd_context_part_mmc (eMMC)
| 0x6E80 || 0x398 || sd_context_part_mmc (eMMC)
|-
|-
| 0x7218 || 0x398 || sd_context_part_mmc (game card)
| 0x7218 || 0x398 || sd_context_part_mmc (gamecard)
|-
|-
| 0x75B0 || 0xC0 || sd_context_part_sd (unknown) used in initialize_sd_device (c1271539)
| 0x75B0 || 0xC0 || sd_context_part_sd (unknown) used in [[#initialize_sd_device|initialize_sd_device]]
|-
|-
| 0x7670 || 0xC0 || sd_context_part_sd (game card) used in initialize_sd_device (c1271539)
| 0x7670 || 0xC0 || sd_context_part_sd (gamecard) used in [[#initialize_sd_device|initialize_sd_device]]
|-
|-
| 0x7730 || 0xC0 || sd_context_part_sd (unknown) used in initialize_sd_device (c1271539)
| 0x7730 || 0xC0 || sd_context_part_sd (unknown) used in [[#initialize_sd_device|initialize_sd_device]]
|-
|-
| 0x77F0 || 0xD38 || custom context used in aabaa0f0
| 0x77F0 || 0xD38 || custom context used in [[#wlan_bt_initialize_custom_context2|wlan_bt_initialize_custom_context2]]
|-
|-
| 0x8528 || 0xD38 || custom context used in aabaa0f0
| 0x8528 || 0xD38 || custom context used in [[#wlan_bt_initialize_custom_context2|wlan_bt_initialize_custom_context2]]
|-
|-
| 0x9260 || 0x398 || sd_context_part_wlanbt (wlan/bt)
| 0x9260 || 0x398 || sd_context_part_wlanbt (wlan/bt)
Line 93: Line 83:
|-
|-
| 0x9E80 || 0x118 || some wlan/bt data
| 0x9E80 || 0x118 || some wlan/bt data
|-
|}
|}


== Allocated blocks ==
== Allocated blocks ==


During initialization step Sdif driver allocates couple of memory blocks.
During initialization step Sdif driver allocates couple of memory blocks. This happens when 'module_start' function is called, inside 'init' function.
This happens when 'module_start' function is called, inside 'init' function.


There are 2 blocks per device context. Each block is named as SceSdif<N> where N is array index.
There are 2 blocks per device context. Each block is named as SceSdif<N> where N is array index.
Line 109: Line 97:
First block is DMA copied to / from corresponding SceSdif<N> [[Physical_Memory|physical address]].
First block is DMA copied to / from corresponding SceSdif<N> [[Physical_Memory|physical address]].


First block looks like to have layout that corresponds to standard SD/MMC host that is described in "Physical Layer Simplified Specification"
First block looks like to have layout that corresponds to standard SD/MMC host that is described in "Physical Layer Simplified Specification".


== SceSdifForDriver ==
== SceSdifForDriver ==
Line 115: Line 103:
=== Types ===
=== Types ===


<source lang="c">
<source lang="C">
typedef enum SceSdifDevice {
SCE_SDIF_DEVICE_EMMC = 0,
SCE_SDIF_DEVICE_GC  = 1,
SCE_SDIF_DEVICE_SDIO = 2,
SCE_SDIF_DEVICE_USD  = 3,
} SceSdifDevice;
 
typedef enum SceSdifDeviceType {
SCE_SDIF_DEVICE_TYPE_INVALID = 0,
SCE_SDIF_DEVICE_TYPE_MMC    = 1,
SCE_SDIF_DEVICE_TYPE_SD      = 2,
SCE_SDIF_DEVICE_TYPE_SDIO    = 3,
} SceSdifDeviceType;


typedef struct cmd_info
typedef struct cmd_info {
{
   uint32_t state_flags;
   uint32_t state_flags;
   uint32_t command;
   uint32_t command;
Line 126: Line 126:
   uint16_t resp_n_blocks;
   uint16_t resp_n_blocks;
    
    
   union
   union {
  {
     struct {
     struct
    {
         char data[0x10];
         char data[0x10];
     } db;
     } db;
     struct
     struct {
    {
         uint32_t dw0;
         uint32_t dw0;
         uint32_t dw1;
         uint32_t dw1;
Line 139: Line 136:
         uint32_t dw3;
         uint32_t dw3;
     } dw;
     } dw;
   }response;
   } response;
    
    
   uint32_t error_code;
   uint32_t error_code;
} cmd_info;
} cmd_info;


typedef struct host_info
typedef struct host_info {
{
     sd_mmc_registers* host_registers;
     sd_mmc_registers* host_registers;
     uint32_t unk_4;
     uint32_t unk_4;
Line 161: Line 157:
} host_info;
} host_info;


typedef struct device_info
typedef struct device_info {
{
     uint32_t dev_type_idx; // (1,2,3)
     uint32_t dev_type_idx; // (1,2,3)
     uint32_t unk_4;
     uint32_t unk_4;
Line 168: Line 163:
} device_info;
} device_info;


typedef struct sdif_context_general //size is 0x40
typedef struct sdif_context_general { //size is 0x40
{
     SceUID suspend_callback_id;
     SceUID suspend_callback_id;
     uint32_t max_array_index; //typically 3
     uint32_t max_array_index; // typically 3
     uint32_t unk_8;
     uint32_t unk_8;
     uint32_t unk_C;  
     uint32_t unk_C;  
Line 189: Line 183:
     uint32_t unk_38;
     uint32_t unk_38;
     uint32_t unk_3C;  
     uint32_t unk_3C;  
}sdif_context_general;
} sdif_context_general;


typedef struct cmd_input // size is 0x240
typedef struct cmd_input { // size is 0x240
{
   uint32_t size; // 0x240
   uint32_t size; // 0x240


   //bit 10 (shift left 0x15) - request invalidate flag - invalidate vaddr_1C0 and vaddr_200
   // bit 10 (shift left 0x15) - request invalidate flag - invalidate vaddr_1C0 and vaddr_200
   //this flag is used for CMD56 and CMD17
   // this flag is used for CMD56 and CMD17
   //bit 20 (shift left 0xB) - request mem_188 free - free memblock with uid mem_188
   // bit 20 (shift left 0xB) - request mem_188 free - free memblock with uid mem_188


   //bit 20 or bit 9 cancels invalidation (both must be clear)
   // bit 20 or bit 9 cancels invalidation (both must be clear)
   uint32_t state_flags; // interrupt handler completion flag
   uint32_t state_flags; // interrupt handler completion flag


Line 205: Line 198:
   uint32_t argument;
   uint32_t argument;
    
    
   //stores normal response without command index and crc-7
   // stores normal response without command index and crc-7
   //can also store CID or CSD. crr-7 will be cleared
   // can also store CID or CSD. crr-7 will be cleared
   //storage order is reversed
   // storage order is reversed
   union
   union {
  {
     struct {
     struct
    {
         char data[0x10];
         char data[0x10];
     } db;
     } db;
     struct
     struct {
    {
         uint32_t dw0;
         uint32_t dw0;
         uint32_t dw1;
         uint32_t dw1;
Line 221: Line 211:
         uint32_t dw3;
         uint32_t dw3;
     } dw;
     } dw;
   }response;
   } response;


   void* buffer; // cmd data buffer ptr - dest for vaddr_1C0
   void* buffer; // cmd data buffer ptr - dest for vaddr_1C0
   uint16_t resp_block_size_24; // block size of response. typically 0x200 which is default sector size
   uint16_t resp_block_size_24; // block size of response. typically 0x200 which is default sector size
   uint16_t resp_n_blocks_26; // number of blocks in response. typically number of sectors to read/write
   uint16_t resp_n_blocks_26; // number of blocks in response. typically number of sectors to read/write
   uint32_t error_code; //error from interrupt handler (confirmed)
   uint32_t error_code; // error code from interrupt handler (confirmed)
   uint32_t unk_2C;
   uint32_t unk_2C;


Line 232: Line 222:
    
    
   struct cmd_input* next_cmd;
   struct cmd_input* next_cmd;
   uint32_t unk_64; //some flag. must be 3 for invalidation to happen
   uint32_t unk_64; // some flag. must be 3 for invalidation to happen
   uint32_t array_index;
   uint32_t array_index;
   int(*set_event_flag_callback)(void* ctx);
   int(*set_event_flag_callback)(void* ctx);
Line 241: Line 231:
   uint32_t unk_7C;
   uint32_t unk_7C;
    
    
   char vaddr_80[0x80]; //3 - mapped to paddr_184 (invalidate 0x80)
   char vaddr_80[0x80]; // 3 - mapped to paddr_184 (invalidate 0x80)


   void* vaddr_100;
   void* vaddr_100;
Line 247: Line 237:


   uint32_t unk_180;
   uint32_t unk_180;
   void* paddr_184; //3 - phys address of vaddr_80
   void* paddr_184; // 3 - phys address of vaddr_80
   SceUID mem_188; //SceSdif memblock
   SceUID mem_188; // SceSdif memblock
   uint32_t unk_18C;
   uint32_t unk_18C;


   uint32_t unk_190;
   uint32_t unk_190;
   uint32_t unk_194;
   uint32_t unk_194;
   void* base_198; //dest base for vaddr_200 (also ptr for invalidate)
   void* base_198; // dest base for vaddr_200 (also ptr for invalidate)
                   //data at base contains CMD17 data
                   // data at base contains CMD17 data
                   //data at base also contains fragments of CMD56 response
                   // data at base also contains fragments of CMD56 response
                   //data at offset is unknown (zeroes)
                   // data at offset is unknown (zeroes)
   uint32_t offset_19C; //dest offset for vaddr_200 (also size for invalidate)
   uint32_t offset_19C; //dest offset for vaddr_200 (also size for invalidate)


   uint32_t size_1A0; //size of vaddr_1C0 - only valid if request invalidate flag is set
   uint32_t size_1A0; // size of vaddr_1C0 - only valid if request invalidate flag is set
   uint32_t size_1A4; //size of vaddr_200 - only valid if request invalidate flag is set
   uint32_t size_1A4; // size of vaddr_200 - only valid if request invalidate flag is set
   void* paddr_1A8; //1 - phys address of vaddr_1C0
   void* paddr_1A8; // 1 - phys address of vaddr_1C0
   void* paddr_1AC; //2 - phys address of vaddr_200
   void* paddr_1AC; // 2 - phys address of vaddr_200


   SceInt64 wide_time1; // 0x1B0
   SceInt64 wide_time1; // 0x1B0
   SceInt64 wide_time2; // 0x1B8 - relevant for commands that need to wait for data on DAT lines
   SceInt64 wide_time2; // 0x1B8 - relevant for commands that need to wait for data on DAT lines


   char vaddr_1C0[0x40]; //1 - mapped to paddr_1A8 (invalidate 0x40)
   char vaddr_1C0[0x40]; // 1 - mapped to paddr_1A8 (invalidate 0x40)
                         // - only valid if request invalidate flag is set
                         //   - only valid if request invalidate flag is set
                         // - contains fragments of CMD56 request/response
                         //   - contains fragments of CMD56 request/response
                         // - does not contain CMD17 data
                         //   - does not contain CMD17 data


   char vaddr_200[0x40]; //2 - mapped to paddr_1AC (invalidate 0x40)
   char vaddr_200[0x40]; // 2 - mapped to paddr_1AC (invalidate 0x40)
                         // - only valid if request invalidate flag is set
                         //   - only valid if request invalidate flag is set
                         // - contains unknown data (zeroes)
                         //   - contains unknown data (zeroes)
} cmd_input;
} cmd_input;


typedef struct sd_mmc_registers
typedef struct sd_mmc_registers {
{


}sd_mmc_registers;
} sd_mmc_registers;


typedef struct sd_context_data // size is 0xC0
typedef struct sd_context_data { // size is 0xC0
{
     struct cmd_input* cmd_ptr;
     struct cmd_input* cmd_ptr;
     struct cmd_input* cmd_ptr_next;
     struct cmd_input* cmd_ptr_next;
Line 289: Line 277:
     uint32_t unk_C;
     uint32_t unk_C;
      
      
     uint32_t dev_type_idx; // (1,2,3)
     uint32_t dev_type_idx; // (1, 2, 3)
     sd_context_part_base* ctx; //pointer to custom context (sd_context_part_mmc*, sd_context_part_sd*, sd_context_part_wlanbt*)
     sd_context_part_base* ctx; // pointer to custom context (sd_context_part_mmc*, sd_context_part_sd*, sd_context_part_wlanbt*)
     uint32_t unk_18;
     uint32_t voltages; // MMC_VDD_165_195, MMC_VDD_32_33, etc. Values seen: SDIF0 and SDIF2: 0x80, SDIF1 and SDIF3: 0x300000
     uint32_t unk_1C;
     uint32_t unk_1C;


Line 305: Line 293:
     uint32_t unk_34;
     uint32_t unk_34;
     uint8_t unk_38;
     uint8_t unk_38;
     uint8_t slow_mode; //relevant only for 2 read and 2 write functions
     uint8_t slow_mode; // relevant only for 2 read and 2 write functions
     uint8_t unk_3A;
     uint8_t unk_3A;
     uint8_t unk_3B;
     uint8_t unk_3B;
Line 337: Line 325:
} sd_context_data;
} sd_context_data;


typedef struct sd_context_part_base
typedef struct sd_context_part_base {
{
   struct sd_context_global* gctx_ptr;
   struct sd_context_global* gctx_ptr;
   uint32_t unk_4;
   uint32_t unk_4;
   uint32_t def_sector_size_mmc; // looks like default sector size - used in mmc read/write commands for resp_block_size_24
   uint32_t def_sector_size_mmc; // looks like default sector size - used in mmc read/write commands for resp_block_size_24
   uint32_t def_sector_size_sd; // looks like default sector size - used in sd read/write commands for resp_block_size_24
   uint32_t def_sector_size_sd; // looks like default sector size - used in sd read/write commands for resp_block_size_24


   uint8_t unk_10; //can be padding
   uint8_t unk_10; // can be padding
   uint8_t CID[15]; //this is CID data but in reverse
   uint8_t CID[15]; // this is CID data but in reverse


   uint8_t unk_20; //can be padding
   uint8_t unk_20; // can be padding
   uint8_t CSD[15]; //this is CSD data but in reverse
   uint8_t CSD[15]; // this is CSD data but in reverse
}sd_context_part_base;
} sd_context_part_base;


typedef struct sd_context_part_mmc // size is 0x398
typedef struct sd_context_part_mmc { // size is 0x398
{
   sd_context_part_base ctxb;
   sd_context_part_base ctxb;
    
    
Line 363: Line 349:
} sd_context_part_mmc;
} sd_context_part_mmc;


typedef struct sd_context_part_sd // size is 0xC0
typedef struct sd_context_part_sd { // size is 0xC0
{
   sd_context_part_base ctxb;
   sd_context_part_base ctxb;


Line 370: Line 355:
} sd_context_part_sd;
} sd_context_part_sd;


typedef struct sd_context_part_wlanbt // size is 0x398
typedef struct sd_context_part_wlanbt { // size is 0x398
{
   struct sd_context_global* gctx_ptr;
   struct sd_context_global* gctx_ptr;
    
    
Line 377: Line 361:
} sd_context_part_wlanbt;
} sd_context_part_wlanbt;


typedef struct sd_context_global // size is 0x24C0
typedef struct sd_context_global { // size is 0x24C0
{
     struct cmd_input commands[16];
     struct cmd_input commands[16];
     struct sd_context_data ctx_data;
     struct sd_context_data ctx_data;
} sd_context_global;
} sd_context_global;


typedef struct bulk_transfer {
    uint32_t unk0;
    uint32_t unk1;
    uint32_t count;
    uint32_t unk2;
    uint32_t type; // 1: register access, 2: memory access
    uint32_t unk3;
    void * (*get_next)(void *); // callback to get next buffer
    uint32_t unk4;
}
</source>
</source>


=== init ===
=== sceSdifInitForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 393: Line 386:
|}
|}


<source lang="c">int init();</source>
<source lang="c">SceInt32 sceSdifInitForDriver(void);</source>


=== deinit ===
=== deinit ===
Line 415: Line 408:
<source lang="c">int return_error();</source>
<source lang="c">int return_error();</source>


=== sceSdifEnableSlowCardModeForDriver ===
=== sceSdifMemoryCardEnableSlowModeForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 423: Line 416:
|}
|}


sets slow_mode flag in sd_context_data for game card device
Temp name was sceSdifEnableSlowCardModeForDriver.
 
sets slow_mode flag in sd_context_data for gamecard device


also tries to set flag for device with index 3 but it does not actually exist
also tries to set flag for device with index 3 but it does not actually exist


<source lang="c">int sceSdifEnableSlowCardModeForDriver();</source>
<source lang="c">int sceSdifMemoryCardEnableSlowModeForDriver(void);</source>


=== get_card_insert_state1 ===
=== sceSdifDisableSlowCardModeForDriver ===
{| class="wikitable"
|-
! Version !! NID
|-
| 3.60 || 0x29A71E7F
|}
 
Temp name was sceSdifMemoryCardEnableSlowModeForDriver.
 
resets slow_mode flag in sd_context_data for gamecard device
 
also tries to reset flag for device with index 3 but it does not actually exist
 
<source lang="c">int sceSdifDisableSlowCardModeForDriver(void);</source>
 
=== sceSdifMemoryCardGetCardInsertStateForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 437: Line 448:
|}
|}


<source lang="c">int get_card_insert_state1(int sd_ctx_index);</source>
gc/gcsd.
 
Temp name was sceSdifGetCardInsertState1ForDriver, get_card_insert_state1.
 
<source lang="c">int sceSdifMemoryCardGetCardInsertStateForDriver(SceSdifDevice dev);</source>


=== get_card_insert_state2 ===
=== get_card_insert_state2 ===
Line 454: Line 469:
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0x134e06c4
| 3.60 || 0x134E06C4
|}
|}


<source lang="c">int gc_cmd56_response(sd_context_part* ctx, char* buffer, int length);</source>
<source lang="c">int gc_cmd56_response(sd_context_part *ctx, void *buffer, SceSize length);</source>


=== gc_cmd56_request ===
=== gc_cmd56_request ===
Line 464: Line 479:
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0xb0996641
| 3.60 || 0xB0996641
|}
|}


<source lang="c">int gc_cmd56_request(sd_context_part* ctx, char* buffer, int length);</source>
sceMmcSendGeneralCmdData
 
<source lang="c">int gc_cmd56_request(sd_context_part *ctx, const void *buffer, SceSize length);</source>


=== get_sd_context_global ===
=== get_sd_context_global ===
Line 521: Line 538:
it is confirmed that this function sends sequence of commands that correspond to MMC initialization protocol
it is confirmed that this function sends sequence of commands that correspond to MMC initialization protocol


<source lang="c">int initialize_mmc_device(int sd_ctx_index, sd_context_part** result);</source>
<source lang="c">int initialize_mmc_device(SceSdifDevice dev, sd_context_part** result);</source>


=== wlan_bt_cmd52_sdio ===
=== wlan_bt_acquiredev ===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 535: Line 552:
<source lang="c">int wlan_bt_acquiredev(wlan_context* wlan_ctx);</source>
<source lang="c">int wlan_bt_acquiredev(wlan_context* wlan_ctx);</source>


=== wlan_bt_cmd52_sdio ===
=== wlan_bt_release ===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 547: Line 564:
<source lang="c">int wlan_bt_release(wlan_context* wlan_ctx);</source>
<source lang="c">int wlan_bt_release(wlan_context* wlan_ctx);</source>


=== wlan_bt_cmd52_sdio ===
=== sceSdioReadForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0xd0f78d9b
| 3.60 || 0xD0F78D9B
|}
|}


Reads from wlan sdio device.  
Reads from Wlan/BT SDIO device.


Type variable seems to define which access to use. 1 is for register access, 2 is for data access.
Example from [[SceWlanBt]]:
<source lang="C">ret = sceSdioReadForDriver(wlan_ctx, 0x5C, 1, &g_card_rev, 1);</source>


<source lang="c">int wlan_bt_read(wlan_context* wlan_ctx, int reg, int count, void* dst, int type);</source>
<source lang="c">
// type: 1 for register access, 2 for data access
int sceSdioReadForDriver(wlan_context* wlan_ctx, int reg, int count, void* dst, int type);
</source>


=== wlan_bt_cmd52_sdio ===
=== sceSdioWriteForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0x3c4cdc8b
| 3.60 || 0x3C4CDC8B
|}
|}


Reads from wlan sdio device.
Writes from wlan sdio device.


Type variable seems to define which access to use. 1 is for register access, 2 is for data access.  
Type variable seems to define which access to use. 1 is for register access, 2 is for data access.  


<source lang="c">int wlan_bt_write(wlan_context* wlan_ctx, int reg, int count, void *src, int type);</source>
<source lang="c">int sceSdioWriteForDriver(wlan_context* wlan_ctx, int reg, int count, void *src, int type);</source>


=== wlan_bt_cmd52_sdio ===
=== sceSdioSetBlockLenForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0x733bc373
| 3.60 || 0x733BC373
|}
|}


<source lang="c">int wlan_bt_cmd52_sdio(wlan_context* wlan_ctx, int num);</source>
<source lang="c">int sceSdioSetBlockLenForDriver(wlan_context* wlan_ctx, int num);</source>


=== wlan_bt_cmd52_sdio ===
=== wlan_bt_cmd52_sdio ===
Line 600: Line 621:
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0x5d65e66b
| 0.996.090-3.740.011 || 0x5D65E66B
|}
|}


<source lang="c">int wlan_bt_cmd52_sdio(sd_context_part* ctx, int num0, int num1, void* unk2);</source>
<source lang="c">
// cond: wakeup condition as in scePowerSetWakeupConditionForDriver
int wlan_bt_cmd52_sdio(sd_context_part* ctx, int cond, SceBool num1, SceUInt32* pOut);
</source>


=== wlan_bt_cmd52_sdio ===
=== sceSdioChangeBusSpeedForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0xbc45c83d
| 3.60 || 0xBC45C83D
|}
|}


<source lang="c">int wlan_bt_cmd52_sdio(sd_context_part* ctx, int num);</source>
<source lang="c">int sceSdioChangeBusSpeedForDriver(sd_context_part* ctx, int num);</source>


=== wlan_bt_initialize_custom_context2 ===
=== wlan_bt_initialize_custom_context2 ===
Line 620: Line 644:
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0xaabaa0f0
| 0.990.000-3.740.011 || 0xAABAA0F0
|}
|}


Line 635: Line 659:
<source lang="c">int wlan_bt_initialize_custom_context2(int sd_ctx_index, sd_context_part** ctx);</source>
<source lang="c">int wlan_bt_initialize_custom_context2(int sd_ctx_index, sd_context_part** ctx);</source>


=== wlan_bt ===
=== wlan_bt_bulk_transfer ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0x855c95e1
| 3.60 || 0x855C95E1
|}
|}


<source lang="c">int wlan_bt(wlan_context* wlan_ctx, void* unk0, void* unk1);</source>
This is a guessed name.


=== wlan_bt ===
This function is used in aggregated frame transmit when more than one packet is being transmitted over Wlan.
 
<source lang="c">int wlan_bt_bulk_transfer(wlan_context* wlan_ctx, bulk_transfer* b, void* unk1);</source>
 
=== wlan_bt_get_wlan_context ===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 653: Line 681:
|}
|}


Get wlan_context for sdio device. Vidpid is array with Marvell Vid and wlan/bt pid.
Get wlan_context for sdio device. Vidpid is an array with Marvell Vid and Wlan/Bt pid.
For wlan: vidpid = [0x02df, 0x911a]
 
For bt: vidpid = [0x2df, 0x9119]
For Wlan: vidpid = [0x2df, 0x911a]. For Bt: vidpid = [0x2df, 0x9119].


<source lang="c">int wlan_bt_get_wlan_context(sd_context_part* ctx, int vidpid[2]);</source>
<source lang="c">int wlan_bt_get_wlan_context(sd_context_part* ctx, int vidpid[2]);</source>
Line 669: Line 697:
Temp name was wlan_bt_cmd7.
Temp name was wlan_bt_cmd7.


<source lang="c">int wlan_bt_cmd7(sd_context_part* ctx);</source>
<source lang="c">int sceSdifGoStandbyStateForDriver(sd_context_part* ctx);</source>


=== wlan_bt_cmd52_sdio ===
=== wlan_bt_cmd52_sdio ===
Line 759: Line 787:
|}
|}


this function is just a wrapper for [[SceSdif#wlan_bt_initialize_custom_context2|wlan_bt_initialize_custom_context2]] (aabaa0f0)
This function is just a wrapper for [[SceSdif#wlan_bt_initialize_custom_context2|wlan_bt_initialize_custom_context2]].


<source lang="c">int wlan_bt_initialize_custom_context1(int sd_ctx_index);</source>
<source lang="c">int wlan_bt_initialize_custom_context1(int sd_ctx_index);</source>
Line 830: Line 858:
| 3.60 || 0xb9593652
| 3.60 || 0xb9593652
|}
|}
If <code>nSectors</code> is <code>1</code>, then issues command <code>0x11</code> (<code>READ_SINGLE_BLOCK</code>), and otherwise, command <code>0x12</code> (<code>READ_MULTIPLE_BLOCK</code>).


<source lang="c">int sdstor_read_sector_sd(sd_context_part* ctx, int sector, char* buffer, int nSectors);</source>
<source lang="c">int sdstor_read_sector_sd(sd_context_part* ctx, int sector, char* buffer, int nSectors);</source>
Line 853: Line 883:
<source lang="c">int sceSdWriteSectorForDriver(sd_context_part* ctx, int sector, char* buffer, int nSectors);</source>
<source lang="c">int sceSdWriteSectorForDriver(sd_context_part* ctx, int sector, char* buffer, int nSectors);</source>


=== sdstor_get_cid ===
=== sddev_get_sd_cidForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0x23a4ef01
| 0.931.010-3.20 || not present
|-
| 3.300.041-3.740.011 || 0x23A4EF01
|}
|}
This is the name of the subroutine. Temp name was sdstor_get_cidForDriver, sceSdifGetCIDForDriver.


<source lang="c">
<source lang="c">
//size of cid is 0x10
//size of cid is 0x10
int sdstor_get_cid(sd_context_part* ctx, char* cid);
int sddev_get_sd_cidForDriver(sd_context_part* ctx, char* cid);
</source>
</source>


Line 876: Line 910:
<source lang="c">int sdstor_cmd0_cmd13(int sd_ctx_index);</source>
<source lang="c">int sdstor_cmd0_cmd13(int sd_ctx_index);</source>


=== sdstor_cmd32_cmd33_cmd38_sdio ===
=== sceSdEraseForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 884: Line 918:
|}
|}


<source lang="c">int sdstor_cmd32_cmd33_cmd38_sdio(int sd_ctx_index, int unk0);</source>
This is a guessed name.
 
Temp name was sdstor_cmd32_cmd33_cmd38_sdio.
 
Used by [[SceSdstor]].
 
<source lang="C">int sceSdEraseForDriver(SceSdifDevice dev, SceUID callback_id);</source>


=== initialize_sd_device ===
=== initialize_sd_device ===
Line 891: Line 931:
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0xc1271539
| 3.60 || 0xC1271539
|}
|}


it is confirmed that this function sends sequence of commands that correspond to SD initialization protocol
This function sends sequence of commands that correspond to SD initialization protocol. These commands include: cmd0, cmd8, cmd5_sdio, cmd2, cmd3, cmd6, cmd9, cmd7, cmd16. Some paired commands are: (cmd55, acmd41), (cmd55, acmd42), (cmd55, acmd13), (cmd55, acmd51).
 
these commands include: cmd0, cmd8, cmd5_sdio, cmd2, cmd3, cmd6, cmd9, cmd7, cmd16
 
some paired commands: (cmd55, acmd41), (cmd55, acmd42), (cmd55, acmd13), (cmd55, acmd51)
 
there are couple of special points:
 
* it does not check sd_ctx_index argument.
* it does not check sd_ctx_index argument.
* it uses array of 3 custom contexts instead of sd_context_part structures.
* it uses array of 3 custom contexts instead of sd_context_part structures.
Line 907: Line 940:
* it only initializes device with device type index 2. otherwise 0x80320017 error is returned.
* it only initializes device with device type index 2. otherwise 0x80320017 error is returned.


<source lang="c">int initialize_sd_device(int sd_ctx_index, int* result);</source>
<source lang="c">int initialize_sd_device(SceSdifDevice dev, int* result);</source>


=== sdstor_cmd6_cmd30 ===
=== sceMmcHasWriteProtectForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0x995748ea
| 3.60-3.65 || 0x995748EA
|}
|}


<source lang="c">int sdstor_cmd6_cmd30(sd_context_part *input, int unk0, int unk1, void *unk2);</source>
This is a guessed name.


=== sdstor ===
Temp name was sdstor_cmd6_cmd30, sendWriteProtectStatusForDriver.
 
<source lang="c">int sceMmcHasWriteProtectForDriver(sd_context_part *input, SceUInt32 posSector, SceUInt32 nSector, SceBool *result);</source>
 
=== sceSdHasWriteProtectForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0xe091ba2e
| 3.60 || 0xE091BA2E
|}
|}


<source lang="c">int sdstor(sd_context_part* unk, int unk0, int unk1, int* unk2);</source>
This is a guessed name.


=== sceMmcWriteSector2ForDriver ===
<source lang="c">int sceSdHasWriteProtectForDriver(sd_context_part *input, SceUInt32 posSector, SceUInt32 nSector, SceBool *result);</source>
 
=== sceMmcWriteSectorInternalForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 937: Line 976:
|}
|}


<source lang="c">int sceMmcWriteSector2ForDriver(sd_context_part *ctx, int unk0, int unk1);</source>
Temp name was sceMmcWriteSector2ForDriver.


=== sceSdWriteSector2ForDriver ===
<source lang="c">int sceMmcWriteSectorInternalForDriver(sd_context_part *ctx, int unk0, int unk1);</source>
 
=== sceSdWriteSectorInternalForDriver ===
{| class="wikitable"
{| class="wikitable"
|-
|-
Line 947: Line 988:
|}
|}


<source lang="c">int sceSdWriteSector2ForDriver(sd_context_part *ctx, int unk0, int unk1);</source>
Temp name was sceSdWriteSector2ForDriver.


=== sceSdifDisableSlowCardMode ===
<source lang="c">int sceSdWriteSectorInternalForDriver(sd_context_part *ctx, int unk0, int unk1);</source>
{| class="wikitable"
|-
! Version !! NID
|-
| 3.60 || 0x29A71E7F
|}
 
resets slow_mode flag in sd_context_data for game card device
 
also tries to reset flag for device with index 3 but it does not actually exist
 
<source lang="c">int sceSdifDisableSlowCardMode(void);</source>


=== sdif_cmd0_cmd13===
=== sdif_cmd0_cmd13===
Line 985: Line 1,014:
then enables (Internal Clock Enable) bit
then enables (Internal Clock Enable) bit


then waits till clock is table (Internal Clock Stable)
then waits til clock is stable (Internal Clock Stable)


then enables (SD Clock Enable) bit for sdio device
then enables (SD Clock Enable) bit for sdio device
Line 1,038: Line 1,067:


<source lang="c">
<source lang="c">
//default_sector_size should be equal to 0x200
// default_sector_size should be equal to 0x200
int set_default_sector_size_mmc(sd_context_part* ctx, int default_sector_size);
int set_default_sector_size_mmc(sd_context_part* ctx, int default_sector_size);
</source>
</source>
Line 1,052: Line 1,081:
<source lang="c">int sdif_cmd0_cmd16(sd_context_part* ctx, int num_200);</source>
<source lang="c">int sdif_cmd0_cmd16(sd_context_part* ctx, int num_200);</source>


[[Category:ARM]]
[[Category:Kernel]]
[[Category:Modules]]
[[Category:Modules]]
[[Category:Kernel]]
[[Category:Library]]

Latest revision as of 17:14, 20 January 2024

Sdif likely stands for Storage Device InterFace. SceSdif is a kernel module that is primary responsible for communicating with SD devices. This includes eMMC (internal storage), gamecard MMC, SD/micro SD card, Wlan/Bt SDIO devices. Memory Card is handled by SceMsif instead as it uses an authentication security layer.

To communicate with a particular device SceSdif module uses device index (sd_ctx_index).

Device Index Device Device Type Description
0 Internal MMC eMMC (internal storage)
1 Game card MMC/SD Gamecard/?SD card?
2 Wlan/Bt SDIO Wlan/Bt
3 Micro SD SD Used by SceSdstor "usd" device. Related to error 0x80320013 on release FW 3.600.011 but maybe used on old FW versions.

There is one more index value that closely correlates with Device Index. This is speculated to be Device Type Index. It is initialized by internal subroutine that does preinitialization (cmd0, cmd8, cmd5_sdio, cmd55, acmd41). Value is typically stored in sd_context_data structure in field dev_type_idx.

Device Type Index Device Type Associated SceSdif init function
0 Unknown (invalid?) None?
1 MMC get_sd_context_part_validate_mmc
2 SD get_sd_context_part_validate_sd
3 SDIO get_sd_context_part_validate_sdio

Module

Version World Privilege
0.990.000-3.740.011 Non-secure Kernel

Libraries

Known NIDs

Version Name World Visibility NID
0.990.000-3.740.011 SceSdifForDriver Non-secure Kernel 0x96D306FA

Data segment layout

Address Size Description
0x0000 0x40 sdif_context_general
0x0040 0x24C0 sd_context_global (eMMC)
0x2500 0x24C0 sd_context_global (gamecard)
0x49C0 0x24C0 sd_context_global (wlan/bt)
0x6E80 0x398 sd_context_part_mmc (eMMC)
0x7218 0x398 sd_context_part_mmc (gamecard)
0x75B0 0xC0 sd_context_part_sd (unknown) used in initialize_sd_device
0x7670 0xC0 sd_context_part_sd (gamecard) used in initialize_sd_device
0x7730 0xC0 sd_context_part_sd (unknown) used in initialize_sd_device
0x77F0 0xD38 custom context used in wlan_bt_initialize_custom_context2
0x8528 0xD38 custom context used in wlan_bt_initialize_custom_context2
0x9260 0x398 sd_context_part_wlanbt (wlan/bt)
0x95F8 0x888 unknown
0x9E80 0x118 some wlan/bt data

Allocated blocks

During initialization step Sdif driver allocates couple of memory blocks. This happens when 'module_start' function is called, inside 'init' function.

There are 2 blocks per device context. Each block is named as SceSdif<N> where N is array index.

First block is of size 0x1000 - SceUID and void* are stored in sd_context_data per device context.

Second block is of size 0x10000 - SceUID and void* are stored in sd_context_data per device context.

First block is DMA copied to / from corresponding SceSdif<N> physical address.

First block looks like to have layout that corresponds to standard SD/MMC host that is described in "Physical Layer Simplified Specification".

SceSdifForDriver

Types

typedef enum SceSdifDevice {
	SCE_SDIF_DEVICE_EMMC = 0,
	SCE_SDIF_DEVICE_GC   = 1,
	SCE_SDIF_DEVICE_SDIO = 2,
	SCE_SDIF_DEVICE_USD  = 3,
} SceSdifDevice;

typedef enum SceSdifDeviceType {
	SCE_SDIF_DEVICE_TYPE_INVALID = 0,
	SCE_SDIF_DEVICE_TYPE_MMC     = 1,
	SCE_SDIF_DEVICE_TYPE_SD      = 2,
	SCE_SDIF_DEVICE_TYPE_SDIO    = 3,
} SceSdifDeviceType;

typedef struct cmd_info {
   uint32_t state_flags;
   uint32_t command;
   uint32_t argument;
   void* buffer;
   uint16_t resp_block_size;
   uint16_t resp_n_blocks;
   
   union {
     struct {
        char data[0x10];
     } db;
     struct {
        uint32_t dw0;
        uint32_t dw1;
        uint32_t dw2;
        uint32_t dw3;
     } dw;
   } response;
   
   uint32_t error_code;
} cmd_info;

typedef struct host_info {
    sd_mmc_registers* host_registers;
    uint32_t unk_4;
    uint32_t base_clock; // = 48000000 dec
    uint32_t bus_width; // = 1 / 4 / 8 (bits)
    uint32_t clock_frequency; // = base_clock >> (SDCLK Frequency Select)
    uint8_t timeout_control_register;
    uint8_t specification_version_number; // = 1 / 2 / 3
    uint8_t vendor_version_number;
    uint8_t unk_17;
    uint32_t unk_18;
    uint32_t unk_1C;
    uint32_t unk_20;
    uint32_t unk_24;
} host_info;

typedef struct device_info {
    uint32_t dev_type_idx; // (1,2,3)
    uint32_t unk_4;
    uint16_t unk_8;
} device_info;

typedef struct sdif_context_general { //size is 0x40
    SceUID suspend_callback_id;
    uint32_t max_array_index; // typically 3
    uint32_t unk_8;
    uint32_t unk_C; 

    uint32_t unk_10;
    uint32_t unk_14;
    uint32_t unk_18;
    uint32_t unk_1C; 

    uint32_t unk_20;
    uint32_t unk_24;
    uint32_t unk_28;
    uint32_t unk_2C; 

    uint32_t unk_30;
    uint32_t unk_34;
    uint32_t unk_38;
    uint32_t unk_3C; 
} sdif_context_general;

typedef struct cmd_input { // size is 0x240
   uint32_t size; // 0x240

   // bit 10 (shift left 0x15) - request invalidate flag - invalidate vaddr_1C0 and vaddr_200
   // this flag is used for CMD56 and CMD17
   // bit 20 (shift left 0xB) - request mem_188 free - free memblock with uid mem_188

   // bit 20 or bit 9 cancels invalidation (both must be clear)
   uint32_t state_flags; // interrupt handler completion flag

   uint32_t command;
   uint32_t argument;
   
   // stores normal response without command index and crc-7
   // can also store CID or CSD. crr-7 will be cleared
   // storage order is reversed
   union {
     struct {
        char data[0x10];
     } db;
     struct {
        uint32_t dw0;
        uint32_t dw1;
        uint32_t dw2;
        uint32_t dw3;
     } dw;
   } response;

   void* buffer; // cmd data buffer ptr - dest for vaddr_1C0
   uint16_t resp_block_size_24; // block size of response. typically 0x200 which is default sector size
   uint16_t resp_n_blocks_26; // number of blocks in response. typically number of sectors to read/write
   uint32_t error_code; // error code from interrupt handler (confirmed)
   uint32_t unk_2C;

   uint8_t data0[0x30];   
   
   struct cmd_input* next_cmd;
   uint32_t unk_64; // some flag. must be 3 for invalidation to happen
   uint32_t array_index;
   int(*set_event_flag_callback)(void* ctx);
   
   SceUID evid; // event id SceSdif0, SceSdif1, SceSdif2 (SceSdif3 ?)
   struct cmd_input* secondary_cmd; // (when multiple commands are sent)
   struct sd_context_global* gctx_ptr;
   uint32_t unk_7C;
   
   char vaddr_80[0x80]; // 3 - mapped to paddr_184 (invalidate 0x80)

   void* vaddr_100;
   uint8_t data_104[0x7C];

   uint32_t unk_180;
   void* paddr_184; // 3 - phys address of vaddr_80
   SceUID mem_188; // SceSdif memblock
   uint32_t unk_18C;

   uint32_t unk_190;
   uint32_t unk_194;
   void* base_198; // dest base for vaddr_200 (also ptr for invalidate)
                   // data at base contains CMD17 data
                   // data at base also contains fragments of CMD56 response
                   // data at offset is unknown (zeroes)
   uint32_t offset_19C; //dest offset for vaddr_200 (also size for invalidate)

   uint32_t size_1A0; // size of vaddr_1C0 - only valid if request invalidate flag is set
   uint32_t size_1A4; // size of vaddr_200 - only valid if request invalidate flag is set
   void* paddr_1A8; // 1 - phys address of vaddr_1C0
   void* paddr_1AC; // 2 - phys address of vaddr_200

   SceInt64 wide_time1; // 0x1B0
   SceInt64 wide_time2; // 0x1B8 - relevant for commands that need to wait for data on DAT lines

   char vaddr_1C0[0x40]; // 1 - mapped to paddr_1A8 (invalidate 0x40)
                         //   - only valid if request invalidate flag is set
                         //   - contains fragments of CMD56 request/response
                         //   - does not contain CMD17 data

   char vaddr_200[0x40]; // 2 - mapped to paddr_1AC (invalidate 0x40)
                         //   - only valid if request invalidate flag is set
                         //   - contains unknown data (zeroes)
} cmd_input;

typedef struct sd_mmc_registers {

} sd_mmc_registers;

typedef struct sd_context_data { // size is 0xC0
    struct cmd_input* cmd_ptr;
    struct cmd_input* cmd_ptr_next;
    uint32_t unk_8;
    uint32_t unk_C;
    
    uint32_t dev_type_idx; // (1, 2, 3)
    sd_context_part_base* ctx; // pointer to custom context (sd_context_part_mmc*, sd_context_part_sd*, sd_context_part_wlanbt*)
    uint32_t voltages; // MMC_VDD_165_195, MMC_VDD_32_33, etc. Values seen: SDIF0 and SDIF2: 0x80, SDIF1 and SDIF3: 0x300000
    uint32_t unk_1C;

    uint32_t array_idx; // (0,1,2)
    uint8_t unk_24;
    uint8_t unk_25;
    uint8_t unk_26;
    uint8_t unk_27;
    cmd_input* cmd_28;
    cmd_input* cmd_2C;

    sd_mmc_registers* host_registers; // membase of SceSdif (0,1,2) memblock of size 0x1000
    uint32_t unk_34;
    uint8_t unk_38;
    uint8_t slow_mode; // relevant only for 2 read and 2 write functions
    uint8_t unk_3A;
    uint8_t unk_3B;

    SceUID host_registers_uid; // UID of SceSdif (0,1,2) memblock of size 0x1000

    SceUID evid; // event id SceSdif0, SceSdif1, SceSdif2 (SceSdif3 ?)
    fast_mutex sdif_fast_mutex;  //size is 0x40 - SceSdif0, SceSdif1, SceSdif2 (SceSdif3 ?) 

    //it looks like this chunk is separate structure since offset 0x2480 is used too often

    //offset 0x2484
    SceUID uid_10000; // UID of SceSdif (0,1,2) memblock of size 0x10000
    void* membase_10000; // membase of SceSdif (0,1,2) memblock of size 0x10000
    uint32_t unk_8C;

    uint32_t unk_90;
    int lockable_int;
    uint32_t unk_98;
    uint32_t unk_9C;

    uint32_t unk_A0;
    uint32_t unk_A4;
    uint32_t unk_A8;
    uint32_t unk_AC;

    uint32_t unk_B0;
    uint32_t unk_B4;
    uint32_t unk_B8;
    uint32_t unk_BC;
} sd_context_data;

typedef struct sd_context_part_base {
   struct sd_context_global* gctx_ptr;
   uint32_t unk_4;
   uint32_t def_sector_size_mmc; // looks like default sector size - used in mmc read/write commands for resp_block_size_24
   uint32_t def_sector_size_sd; // looks like default sector size - used in sd read/write commands for resp_block_size_24

   uint8_t unk_10; // can be padding
   uint8_t CID[15]; // this is CID data but in reverse

   uint8_t unk_20; // can be padding
   uint8_t CSD[15]; // this is CSD data but in reverse
} sd_context_part_base;

typedef struct sd_context_part_mmc { // size is 0x398
   sd_context_part_base ctxb;
   
   uint8_t EXT_CSD[0x200]; // 0x30

   uint8_t data_230[0x160];
   
   void* unk_390;
   uint32_t unk_394;
} sd_context_part_mmc;

typedef struct sd_context_part_sd { // size is 0xC0
   sd_context_part_base ctxb;

   uint8_t data[0x90];
} sd_context_part_sd;

typedef struct sd_context_part_wlanbt { // size is 0x398
   struct sd_context_global* gctx_ptr;
   
   uint8_t data[0x394];
} sd_context_part_wlanbt;

typedef struct sd_context_global { // size is 0x24C0
    struct cmd_input commands[16];
    struct sd_context_data ctx_data;
} sd_context_global;

typedef struct bulk_transfer {
    uint32_t unk0;
    uint32_t unk1;
    uint32_t count;
    uint32_t unk2;
    uint32_t type; // 1: register access, 2: memory access
    uint32_t unk3;
    void * (*get_next)(void *); // callback to get next buffer
    uint32_t unk4;
}

sceSdifInitForDriver

Version NID
3.60 0x0eb0ef86 
SceInt32 sceSdifInitForDriver(void);

deinit

Version NID
3.60 0xe5e5f42e 
int deinit();

return_error

Version NID
3.60 0x235ad556 
int return_error();

sceSdifMemoryCardEnableSlowModeForDriver

Version NID
0.990-3.60 0xF37CF8E5

Temp name was sceSdifEnableSlowCardModeForDriver.

sets slow_mode flag in sd_context_data for gamecard device

also tries to set flag for device with index 3 but it does not actually exist 

int sceSdifMemoryCardEnableSlowModeForDriver(void);

sceSdifDisableSlowCardModeForDriver

Version NID
3.60 0x29A71E7F

Temp name was sceSdifMemoryCardEnableSlowModeForDriver.

resets slow_mode flag in sd_context_data for gamecard device

also tries to reset flag for device with index 3 but it does not actually exist 

int sceSdifDisableSlowCardModeForDriver(void);

sceSdifMemoryCardGetCardInsertStateForDriver

Version NID
3.60 0x36a2b01b

gc/gcsd.

Temp name was sceSdifGetCardInsertState1ForDriver, get_card_insert_state1. 

int sceSdifMemoryCardGetCardInsertStateForDriver(SceSdifDevice dev);

get_card_insert_state2

Version NID
3.60 0xfd9e5cfa 
int get_card_insert_state2(int sd_ctx_index);

gc_cmd56_response

Version NID
3.60 0x134E06C4 
int gc_cmd56_response(sd_context_part *ctx, void *buffer, SceSize length);

gc_cmd56_request

Version NID
3.60 0xB0996641

sceMmcSendGeneralCmdData 

int gc_cmd56_request(sd_context_part *ctx, const void *buffer, SceSize length);

get_sd_context_global

Version NID
3.60 0xdc8f52f8 
sd_context_global* get_sd_context_global(int sd_ctx_index);

get_sd_context_part_validate_mmc

Version NID
3.60 0x6a71987f 
sd_context_part* get_sd_context_part_validate_mmc(int sd_ctx_index);

get_sd_context_part_validate_sd

Version NID
3.60 0xb9ea5b1e 
sd_context_part* get_sd_context_part_validate_sd(int sd_ctx_index);

get_sd_context_part_validate_sdio

Version NID
3.60 0x6a8235fc 
sd_context_part* get_sd_context_part_validate_sdio(int sd_ctx_index);

initialize_mmc_device

Version NID
3.60 0x22c82e79

this function only initializes devices with sd_ctx_index 0 and 1 and returns 0x80320013 on any other sd_ctx_index

it is confirmed that this function sends sequence of commands that correspond to MMC initialization protocol 

int initialize_mmc_device(SceSdifDevice dev, sd_context_part** result);

wlan_bt_acquiredev

Version NID
3.60 0x3428884d

Called in initialization sequence. 

int wlan_bt_acquiredev(wlan_context* wlan_ctx);

wlan_bt_release

Version NID
3.60 0xe80293ef

Called in failures. Assumed to be release of sdio device. 

int wlan_bt_release(wlan_context* wlan_ctx);

sceSdioReadForDriver

Version NID
3.60 0xD0F78D9B

Reads from Wlan/BT SDIO device.

Example from SceWlanBt: 

ret = sceSdioReadForDriver(wlan_ctx, 0x5C, 1, &g_card_rev, 1);
// type: 1 for register access, 2 for data access
int sceSdioReadForDriver(wlan_context* wlan_ctx, int reg, int count, void* dst, int type);

sceSdioWriteForDriver

Version NID
3.60 0x3C4CDC8B

Writes from wlan sdio device.

Type variable seems to define which access to use. 1 is for register access, 2 is for data access. 

int sceSdioWriteForDriver(wlan_context* wlan_ctx, int reg, int count, void *src, int type);

sceSdioSetBlockLenForDriver

Version NID
3.60 0x733BC373 
int sceSdioSetBlockLenForDriver(wlan_context* wlan_ctx, int num);

wlan_bt_cmd52_sdio

Version NID
3.60 0xdece963b 
int wlan_bt_cmd52_sdio(sd_context_part* ctx, int num0, int num1, void* unk2);

wlan_bt_cmd52_sdio

Version NID
0.996.090-3.740.011 0x5D65E66B 
// cond: wakeup condition as in scePowerSetWakeupConditionForDriver
int wlan_bt_cmd52_sdio(sd_context_part* ctx, int cond, SceBool num1, SceUInt32* pOut);

sceSdioChangeBusSpeedForDriver

Version NID
3.60 0xBC45C83D 
int sceSdioChangeBusSpeedForDriver(sd_context_part* ctx, int num);

wlan_bt_initialize_custom_context2

Version NID
0.990.000-3.740.011 0xAABAA0F0

this function can send these commands: cmd3, cmd52_sdio, cmd0, cmd5_sdio, cmd55, acmd41, cmd7, cmd8

this function uses array of 2 custom contexts.

this function can either set device type index to 3 and use custom context for initialization.

or it can use preinitialization (cmd0, cmd8, cmd5_sdio, cmd55, acmd41) and then check that device type index is 3.

if device type index is not 3 then 0x80320017 error is returned. 

int wlan_bt_initialize_custom_context2(int sd_ctx_index, sd_context_part** ctx);

wlan_bt_bulk_transfer

Version NID
3.60 0x855C95E1

This is a guessed name.

This function is used in aggregated frame transmit when more than one packet is being transmitted over Wlan. 

int wlan_bt_bulk_transfer(wlan_context* wlan_ctx, bulk_transfer* b, void* unk1);

wlan_bt_get_wlan_context

Version NID
3.60 0x0c66e36f

Get wlan_context for sdio device. Vidpid is an array with Marvell Vid and Wlan/Bt pid.

For Wlan: vidpid = [0x2df, 0x911a]. For Bt: vidpid = [0x2df, 0x9119]. 

int wlan_bt_get_wlan_context(sd_context_part* ctx, int vidpid[2]);

sceSdifGoStandbyStateForDriver

Version NID
0.990-3.60 0xAB0222F2

Temp name was wlan_bt_cmd7. 

int sceSdifGoStandbyStateForDriver(sd_context_part* ctx);

wlan_bt_cmd52_sdio

Version NID
3.60 0x55baeb2d 
int wlan_bt_cmd52_sdio(wlan_context* wlan_ctx);

wlan_bt_cmd52_sdio

Version NID
3.60 0xfe6f3e7b 
int wlan_bt_cmd52_sdio(wlan_context* wlan_ctx);

wlan_bt_cmd52_sdio

Version NID
3.60 0xf1a24edd 
int wlan_bt_cmd52_sdio(wlan_context* wlan_ctx);

wlan_bt_cmd52_sdio

Version NID
3.60 0x1847b18c 
int wlan_bt_cmd52_sdio(wlan_context* wlan_ctx);

wlan_bt_cmd52_sdio

Version NID
3.60 0xd3c1e2b6 
int wlan_bt_cmd52_sdio(wlan_context* wlan_ctx, int unk0, int unk1, int unk2);

wlan_bt_cmd52_sdio

Version NID
3.60 0x5bac6e70 
int wlan_bt_cmd52_sdio(wlan_context* wlan_ctx, int unk0, int unk1, int unk2);

wlan_bt_cmd52_sdio

Version NID
3.60 0x01e8eb6c 
int wlan_bt_cmd52_sdio(sd_context_part* ctx, char* output, int destLength_100);

wlan_bt_cmd52_sdio

Version NID
3.60 0x763f1075 
int wlan_bt_cmd52_sdio(sd_context_part* ctx);

wlan_bt_initialize_custom_context1

Version NID
3.60 0x53962379

This function is just a wrapper for wlan_bt_initialize_custom_context2. 

int wlan_bt_initialize_custom_context1(int sd_ctx_index);

wlan_bt_cmd0

Version NID
3.60 0x3b6ab29e 
int wlan_bt_cmd0(wlan_context* wlan_ctx, void* unk0, int* result);

wlan_bt_cmd0_cmd52_sdio

Version NID
3.60 0x180e7395 
int wlan_bt_cmd0_cmd52_sdio(wlan_context* wlan_ctx, char* output, int destLength_100);

wlan_bt

Version NID
3.60 0x0f157f49 
int wlan_bt(wlan_context* wlan_ctx);

wlan_bt

Version NID
3.60 0x849e3216 
int wlan_bt(wlan_context* wlan_ctx);

wlan_bt

Version NID
3.60 0xb05eff68 
int wlan_bt(wlan_context *wlan_ctx, int unk0);

sceMmcReadSectorForDriver

Version NID
0.990-3.60 0x6F8D529B 
int sceMmcReadSectorForDriver(sd_context_part* ctx, int sector, char* buffer, int nSectors);

sdstor_read_sector_sd

Version NID
3.60 0xb9593652

If nSectors is 1, then issues command 0x11 (READ_SINGLE_BLOCK), and otherwise, command 0x12 (READ_MULTIPLE_BLOCK). 

int sdstor_read_sector_sd(sd_context_part* ctx, int sector, char* buffer, int nSectors);

sceMmcWriteSectorForDriver

Version NID
0.990-3.60 0x175543D2 
int sceMmcWriteSectorForDriver(sd_context_part* ctx, int sector, char* buffer, int nSectors);

sceSdWriteSectorForDriver

Version NID
0.990-3.60 0xE0781171 
int sceSdWriteSectorForDriver(sd_context_part* ctx, int sector, char* buffer, int nSectors);

sddev_get_sd_cidForDriver

Version NID
0.931.010-3.20 not present
3.300.041-3.740.011 0x23A4EF01

This is the name of the subroutine. Temp name was sdstor_get_cidForDriver, sceSdifGetCIDForDriver. 

//size of cid is 0x10
int sddev_get_sd_cidForDriver(sd_context_part* ctx, char* cid);

sdstor_cmd0_cmd13

Version NID
3.60 0x6cc8e28d 
int sdstor_cmd0_cmd13(int sd_ctx_index);

sceSdEraseForDriver

Version NID
3.60 0x35ba9df8

This is a guessed name.

Temp name was sdstor_cmd32_cmd33_cmd38_sdio.

Used by SceSdstor. 

int sceSdEraseForDriver(SceSdifDevice dev, SceUID callback_id);

initialize_sd_device

Version NID
3.60 0xC1271539

This function sends sequence of commands that correspond to SD initialization protocol. These commands include: cmd0, cmd8, cmd5_sdio, cmd2, cmd3, cmd6, cmd9, cmd7, cmd16. Some paired commands are: (cmd55, acmd41), (cmd55, acmd42), (cmd55, acmd13), (cmd55, acmd51).

  • it does not check sd_ctx_index argument.
  • it uses array of 3 custom contexts instead of sd_context_part structures.
  • it checks device type index after preinitialization (cmd0, cmd8, cmd5_sdio, cmd55, acmd41)
  • it only initializes device with device type index 2. otherwise 0x80320017 error is returned.
int initialize_sd_device(SceSdifDevice dev, int* result);

sceMmcHasWriteProtectForDriver

Version NID
3.60-3.65 0x995748EA

This is a guessed name.

Temp name was sdstor_cmd6_cmd30, sendWriteProtectStatusForDriver. 

int sceMmcHasWriteProtectForDriver(sd_context_part *input, SceUInt32 posSector, SceUInt32 nSector, SceBool *result);

sceSdHasWriteProtectForDriver

Version NID
3.60 0xE091BA2E

This is a guessed name. 

int sceSdHasWriteProtectForDriver(sd_context_part *input, SceUInt32 posSector, SceUInt32 nSector, SceBool *result);

sceMmcWriteSectorInternalForDriver

Version NID
0.990-3.60 0x60642F49

Temp name was sceMmcWriteSector2ForDriver. 

int sceMmcWriteSectorInternalForDriver(sd_context_part *ctx, int unk0, int unk1);

sceSdWriteSectorInternalForDriver

Version NID
0.990-3.60 0x0203ECDC

Temp name was sceSdWriteSector2ForDriver. 

int sceSdWriteSectorInternalForDriver(sd_context_part *ctx, int unk0, int unk1);

sdif_cmd0_cmd13

Version NID
3.60 0x53518827 
int sdif_cmd0_cmd13(sd_context_global *ctx, int *result);

reset_to_low_speed_mode

Version NID
3.60 0x475d8e45

this function sends CMD0 reset command to the card

then enables (Internal Clock Enable) bit

then waits til clock is stable (Internal Clock Stable)

then enables (SD Clock Enable) bit for sdio device

then resets (High Speed Enable) bit

then resets (Data Transfer Width) bit

then resets (Extended Data Transfer Width) bit 

int reset_to_low_speed_mode(int sd_ctx_index);

get_host_info

Version NID
3.60 0x3df7e207 
int get_host_info(int sd_ctx_index, host_info *info);

get_device_info

Version NID
3.60 0x76d2b87b 
int get_device_info(int sd_ctx_index, device_info* result);

sdif_cmd_exec

Version NID
3.60 0xb83f7518 
int sdif_cmd_exec(int sd_ctx_index, cmd_info* info);

set_default_sector_size_mmc

Version NID
3.60 0xb32776c7

this function internally also executes CMD16 which sets BLOCKLEN 

// default_sector_size should be equal to 0x200
int set_default_sector_size_mmc(sd_context_part* ctx, int default_sector_size);

sdif_cmd0_cmd16

Version NID
3.60 0xaf702fe7 
int sdif_cmd0_cmd16(sd_context_part* ctx, int num_200);
Retrieved from "http://wiki.henkaku.xyz/index.php?title=SceSdif&oldid=21083"