SceCompatMailbox: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(2 intermediate revisions by one other user not shown)
Line 20: Line 20:
| 0x00 + 4 * ID
| 0x00 + 4 * ID
| 4
| 4
| Raise MIPS Compat interrupt <code>ID</code>. Write all ones. Visible at <code>0xBC300030</code> on [[PSP_Emulator#Interrupt_manager|MIPS side]]
| Raise MIPS Compat interrupt <code>ID</code>. Write all ones. Interrupts will become visible at <code>0xBC300030</code> on [[PSP_Emulator#Interrupt_manager|MIPS side]]
|-
|-
| 0x80 + 4 * ID
| 0x80 + 4 * ID
Line 28: Line 28:


== Interrupt raising sequence ==
== Interrupt raising sequence ==
When one wants to raise "Compat" interrupt <code>ID</code> to the MIPS processor, the following sequence is used:
To raise "Compat" interrupt <code>ID</code> to the MIPS processor, the following sequence is used:
<source lang="c">
<source lang="c">
// Write data to shared address
// Write data to shared address
Line 39: Line 39:
dsb(0xf);
dsb(0xf);
</source>
</source>
[[Category:Kernel]]
[[Category:MMIO]]

Latest revision as of 20:52, 1 May 2023

SceCompatMailbox

Address Size
0xE5070000 0x1000

Registers

Offset Size Comments
0x00 + 4 * ID 4 Raise MIPS Compat interrupt ID. Write all ones. Interrupts will become visible at 0xBC300030 on MIPS side
0x80 + 4 * ID 4 Enable raising MIPS Compat interrupt ID. Write all ones

Interrupt raising sequence

To raise "Compat" interrupt ID to the MIPS processor, the following sequence is used:

// Write data to shared address
shared->foo = bar;
// Trigger interrupt
dsb(0xf);
*(u32 *)(0xE5070000 + ID * 4 + 0x80) = 0xffffffff;
dsb(0xf);
*(u32 *)(0xE5070000 + ID * 4) = 0xffffffff;
dsb(0xf);