SceOled: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
(Added even more reversed OLED cmds)
No edit summary
 
(One intermediate revision by one other user not shown)
Line 22: Line 22:


TODO: move to [[OLED]].
TODO: move to [[OLED]].
PS Vita OLED models:
- AMS495QA01
- Other models?


* Datasheets:
* Datasheets:
Line 505: Line 509:
<source lang="C">int SceOledForDriver_3C990F53(void);</source>
<source lang="C">int SceOledForDriver_3C990F53(void);</source>


 
[[Category:ARM]]
[[Category:Kernel]]
[[Category:Modules]]
[[Category:Modules]]
[[Category:Kernel]]
[[Category:Library]]

Latest revision as of 21:23, 1 May 2023

Module

Version World Privilege
1.69-3.60 Non-secure Kernel

Libraries

Known NIDs

Version Name World Visibility NID
1.69 SceOledForDriver Non-secure Kernel 0x60C7478A

Resources

TODO: move to OLED.

PS Vita OLED models: - AMS495QA01 - Other models?

Types

enum SceOledError {
    SCE_OLED_ERROR_INVALID_BRIGHTNESS_VALUE = 0x803F0A02,
    SCE_OLED_ERROR_INVALID_READY_STATUS = 0x803F0A03,
    SCE_OLED_ERROR_NOT_READY = 0x803F0A04,
    SCE_OLED_ERROR_INTERNAL = 0x803F0A05
};

enum SceOledStatus {
    SCE_OLED_STATUS_NOT_READY = 0,
    SCE_OLED_STATUS_READY = 1,
    SCE_OLED_STATUS_ERROR = 2
};

struct SceOledCmd {
    unsigned char cmd,
    unsigned char size,
    unsigned char buf[size]
}

A cmd_queue is a contiguous array of SceOledCmd of different sizes. To get the next SceOledCmd of a queue, do:

struct SceOledCmd *cur_cmd = ...
struct SceOledCmd *next_cmd = &(cur_cmd->buf) + cur_cmd->size;

if (next_cmd->cmd == 0 || next_cmd->cmd == 255) {...} // End of queue

Available commands

Cmd Name Size Buf Description
0x6 GET_RED_CHANNEL 0x1 Unknown Unknown
0x7 GET_GREEN_CHANNEL 0x1 Unknown Unknown
0x8 GET_BLUE_CHANNEL 0x1 Unknown Unknown
0xA GET_POWER_MODE 0x1 Unknown Unknown
0xB GET_ADDRESS_MODE 0x1 Unknown Unknown
0xC GET_PIXEL_FORMAT 0x1 Unknown Unknown
0xD GET_DISPLAY_MODE 0x1 Unknown Unknown
0xF GET_DIAGNOSTIC_RESULT 0x1 Unknown Unknown
0x26 SET_GAMMA_CURVE 0x1 Unknown Unknown
0x36 SET_ADDRESS_MODE 0x1 Unknown Unknown
0x3A SET_PIXEL_FORMAT 0x1 Unknown Unknown
0xA1 READ_DDB_START 0x5 Unknown Unknown
0xB0 GLOBAL_PARAMETER 0x1 Unknown Unknown
0xB1 ELVSS_CON 0x3 Unknown Unknown
0xB2 TEMP_SWIRE 0x1 Unknown Unknown
0xB3 SCR_CONTROL 0x1 Unknown Unknown
0xB4 SCR_GAMMA 0x1 Unknown Unknown
0xB5 SCR_LUT 0x1 Unknown Unknown
0xC0 ACL_CONTROL 0x1 Unknown Unknown
0xC1 ACL_PROFILE 0x1C Unknown Unknown
0xC2 ACL1_DUTY 0x1 Unknown Unknown
0xC3 ACL1_ACWE 0x1 Unknown Unknown
0xC6 SET_DISPLAY_1 0xB Unknown Unknown
0xC7 SET_DISPLAY_2 0x1 Unknown Unknown
0xC8 SET_DISPLAY_3 0x1 Unknown Unknown
0xC9 SET_DISPLAY_4 0x3 Unknown Unknown
0xD0 SET_OTP1 0x1 Unknown Unknown
0xD1 SET_OTP2 0x1 Unknown Unknown
0xD2 SET_NORMAL_ADJUST_MTP 0x12 Unknown Unknown
0xD3 SET_DARK_ADJUST_MTP 0x12 Unknown Unknown
0xF0 PASSWD1 0x2 Unknown Unknown
0xF1 PASSWD2 0x2 Unknown Unknown
0xF3 MAIN_POWER_SEQUENCE 0x6 Unknown Unknown
0xF4 SET_POWER_CONTROL_1 0x3 Unknown Unknown
0xF5 SET_POWER_CONTROL_2 0x5 Unknown Unknown
0xF6 SET_DISPLAY_5 0x1 Unknown Unknown
0xF7 GTCON 0x1 Unknown Unknown
0xF8 SET_PANEL_CONTROL 0x13 Unknown Unknown
0xF9 SET_NORMAL_GAMMA_CONTROL 0x16 Unknown, for example <0x01, 0xCFBE9F9F, 0xCBC2C9D7, 0xDEE3E1BB, 0xFAD3D0D6, 0x002FE6ED, 0x2F> (Little-Endian) Change Brightness
0xFA SET_DARK_GAMMA_CONTROL 0x16 Unknown Unknown

SceOledForDriver

sceOledWaitReadyForDriver

Version NID
3.60 0x0CC6BCB4

Waits until the OLED has been initialized.

int sceOledWaitReadyForDriver(void);

SceOledForDriver_26F9EEA8_oled_disable

Version NID
3.60 0x26F9EEA8

Disables the OLED by clearing the GPIO bus 0 port 0.

int SceOledForDriver_26F9EEA8_oled_disable(void);

SceOledForDriver_2F0C4B67_send_cmd

Version NID
3.60 0x2F0C4B67

Sends a command to the OLED (via SPI).

int SceOledForDriver_2F0C4B67_send_cmd(u8 cmd, void *buffer, int size);

sceOledGetBrightnessForDriver

Version NID
3.60 0x43EF811A

Get the wide brightness value (0-65536).

int sceOledGetBrightnessForDriver(void);

sceOledDisplayOnForDriver

Version NID
3.60 0x4C7836C7
int sceOledDisplayOnForDriver(void);

sceOledGetDisplayColorSpaceModeForDriver

Version NID
3.60 0x4F8A1D4A
int sceOledGetDisplayColorSpaceModeForDriver(void);

SceOledForDriver_6B1E0B52_oled_enable

Version NID
3.60 0x6B1E0B52

Enables the OLED by setting the GPIO bus 0 port 0.

int SceOledForDriver_6B1E0B52_oled_enable(void);

SceOledForDriver_9F4ABDDC_get_status

Version NID
0.940-3.60 0x9F4ABDDC

Returns the OLED status by reading the GPIO bus 0 port 0.

int SceOledForDriver_9F4ABDDC_get_status(void);

sceOledDisplayOffForDriver

Version NID
3.60 0xBC84602E
int sceOledDisplayOffForDriver(void);

sceOledGetDDBForDriver

Version NID
3.60 0xC9D5987C

Returns the Device Descriptor Block (DDB), read with MIPI DSI command read_DDB_start (0xA1).

int sceOledGetDDBForDriver(unsigned short *supplier_id, unsigned short *supplier_elective_data);

sceOledSetDisplayColorSpaceModeForDriver

Version NID
3.60 0xDABBD9D3
int sceOledSetDisplayColorSpaceModeForDriver(int mode);

SceOledForDriver_E30604CC_dispatch_cmd_list

Version NID
3.60 0xE30604CC

Dispatches the OLED cmd list (using SceOledForDriver_2F0C4B67_send_cmd).

int SceOledForDriver_E30604CC_dispatch_cmd_list(void);

sceOledSetBrightnessForDriver

Version NID
3.60 0xF9624C47

Set the brightness (brightness needs to be in the range 0-65536). 0 means screen turned off, 1 means screen dimmed (like if you wait for a long time without touching your screen).

The brightness has actually 17 different values: 1 special value for brightness=0, and 16 different values for the rest (real_value=brightness/4096).

int sceOledSetBrightnessForDriver(SceUInt32 brightness);

SceOledForDriver_ED2D6F19_set_status

Version NID
0.940-3.60 0xED2D6F19

Used to enable or disable.

// status: 0: disable, 1: enable
int SceOledForDriver_ED2D6F19_set_status(int status);

SceOledForDriver_DDB1412B_reset

Version NID
0.940-3.60 0xDDB1412B

Used to reset.

int SceOledForDriver_DDB1412B_reset(void);

SceOledForDriver_3C990F53

Version NID
0.996 0x3C990F53
3.60 not present

Returns 0 on success.

int SceOledForDriver_3C990F53(void);