SceSyscon: Difference between revisions

Latest revision as of 21:59, 4 April 2024

SceSyscon is a kernel module in charge of interacting with the System Controller by executing commands.

Module

Version	World	Privilege
0.931.010-3.740.011	Non-secure	Kernel

Libraries

Known NIDs

Version	Name	World	Visibility	NID
0.931.010-3.740.011	SceSysconForDriver	Non-secure	Kernel	0x60A35F64

Types

#define SCE_KERNEL_ERROR_SYSCON_ERROR     0x80250000
#define SCE_SYSCON_ERROR_INVALID_SIZE     0x80250001
#define SCE_SYSCON_ERROR_INVALID_ARGUMENT 0x80250002
#define SCE_SYSCON_ERROR_INVALID_POINTER  0x80250003
#define SCE_SYSCON_ERROR_INVALID_STATUS   0x80250004
#define SCE_SYSCON_ERROR_NOT_INTR_ALLOWED 0x80250005
#define SCE_SYSCON_ERROR_TX_SIZE_TOO_LONG 0x80250006

#define SCE_SYSCON_ERROR_ILLEGAL_SIZE     0x80250100
#define SCE_SYSCON_ERROR_ILLEGAL_STATUS   0x80250101
#define SCE_SYSCON_ERROR_NOEXEC           0x80250102
#define SCE_SYSCON_ERROR_INVALID_FLAGS    0x80250105

// Syscon error codes are gotten with 0x80250200 | rx[3], where rx is the data returned by Syscon

typedef struct SceSysconPacket { // size is 0x80
	struct SceSysconPacket *next;
	SceUInt32 status;		// Lower 16 bits contain flags
	SceUID semaId;
	SceUInt32 index;		// Out: returns to which packet list the packet was inserted into
	SceUInt8 tx[32];		// tx[0..1] = cmd, tx[2] = size i.e. sizeof(actual_data)+1, rx[3..31] = actual_data
	SceUInt8 rx[32];		// rx[0..1] = cmd, rx[2] = size i.e. sizeof(actual_data)+2, rx[3] = error_code, rx[4..31] = actual_data
	void *tx_extra;
	void *rx_extra;
	SceSize rx_extra_size;
	SceUInt32 rx_offset;
	int (*callback)(SceSysconPacket *packet, void *argp);
	void *argp;
	SceUInt32 time;
	SceUInt32 unk[5];
} SceSysconPacket;

typedef enum SceSysconControl {
	SCE_SYSCON_CTRL_UP        = 0x1,
	SCE_SYSCON_CTRL_RIGHT     = 0x2,
	SCE_SYSCON_CTRL_DOWN      = 0x4,
	SCE_SYSCON_CTRL_LEFT      = 0x8,
	SCE_SYSCON_CTRL_TRIANGLE  = 0x10,
	SCE_SYSCON_CTRL_CIRCLE    = 0x20,
	SCE_SYSCON_CTRL_CROSS     = 0x40,
	SCE_SYSCON_CTRL_SQUARE    = 0x80,
	SCE_SYSCON_CTRL_SELECT    = 0x100,
	SCE_SYSCON_CTRL_LTRIGGER  = 0x200,
	SCE_SYSCON_CTRL_RTRIGGER  = 0x400,
	SCE_SYSCON_CTRL_START     = 0x800,
	SCE_SYSCON_CTRL_PSBUTTON  = 0x1000,
	SCE_SYSCON_CTRL_POWER     = 0x4000,
	SCE_SYSCON_CTRL_VOLUP     = 0x10000,
	SCE_SYSCON_CTRL_VOLDOWN   = 0x20000,
	SCE_SYSCON_CTRL_HEADPHONE = 0x8000000
} SceSysconControl;

Flags (passed to sceSysconCmdExecForDriver, etc), also lower bits of status:

Flags	Meaning
0x1	Some kind of priority that helps to select to which packet list the packet is inserted into.
0x100	Do not insert packet checksum (at `tx_buf[2 + len]`), where `len = tx_buf[2]`. And don't memset the rest of the buffer to -1 (`memset(tx_buf + len + 3, -1, 29 - len)`) if len < 29.
0x400	When set, use rx_extra to receive the data. rx_extra_size must be greater than 32.
0x800	When set, use tx_extra instead of tx for sending data. The size is contained in tx_extra[2] and must be smaller or equal to 253. When cleared: use tx and the size is contained in tx[2], which has to be smaller or equal 29.

SceSysconForDriver

sceSysconErnieShutdownForDriver

Version	NID
0.931.010-3.740.011	0x94AB13CC

Calls Syscon command 0xC1.

#define ERNIE_SHUTDOWN_SHUTDOWN 0
#define ERNIE_SHUTDOWN_REBOOT 1

int sceSysconErnieShutdownForDriver(int mode);

sceSysconErnieResetForDriver

Version	NID
0.931.010-3.740.011	0x14B99945

This is a guessed name. Temp name was sceSysconPowerCtrlKermitResetForDriver.

It issues SMC 0x11A with type=RESET and mode=0: return sceSysconSetPowerModeForDriver(2, 0);.

int sceSysconErnieResetForDriver(void);

sceSysconErnieHibernateForDriver

Version	NID
0.931.010-0.940	not present
0.990.000-3.740.011	0x4278E614

It issues SMC 0x11A with type=HIBERNATE and mode=0: return sceSysconSetPowerModeForDriver(5, 0);.

int sceSysconErnieHibernateForDriver(void);

sceSysconBatterySWResetForDriver

Version	NID
0.931.010-3.740.011	0x87DA378D

If Syscon version <= 0x70503, it does nothing and returns error 0x8025023F.

int sceSysconBatterySWResetForDriver(void);

sceSysconGetBatteryFullCapForDriver

Version	NID
0.931.010	not present
0.990.000-3.740.011	0xF93CF833

Temp name was sceSysconGetBatteryFullCapacityForDriver.

Used in ScePower's module_start.

int sceSysconGetBatteryFullCapForDriver(SceUInt32 *pCap);

sceSysconGetBicTempForDriver

Version	NID
0.931.010-0.940	not present
0.990.000	0xECFA7242
1.000.041-3.740.011	not present. Renamed to sceSysconGetAbbyTempForDriver.

This is a guessed name. Another possible name is sceSysconGetBatteryInternalTempForDriver.

Replaced (just renaming) by #sceSysconGetAbbyTempForDriver.

Calls Syscon command 0x98B.

int sceSysconGetBicTempForDriver(SceUInt32 *pTemp);

sceSysconGetAbbyTempForDriver

Version	NID
0.931.010-0.990.000	not present. Was named sceSysconGetBicTempForDriver.
1.000.041-3.740.011	0xE1885F68

This is a guessed name. Another possible name is sceSysconGetBatteryInternalTempForDriver.

Replacement (just renaming) for #sceSysconGetBicTempForDriver.

Calls Syscon command 0x98B.

int sceSysconGetAbbyTempForDriver(SceUInt32 *pTemp);

sceSysconGetBatteryCycleCountForDriver

Version	NID
0.931.010-0.990.000	not present
0.996.090-3.740.011	0xCD73079D

Calls Syscon command 0x98C.

Used in ScePower.

int sceSysconGetBatteryCycleCountForDriver(SceUInt32 *pCount);

sceSysconBatteryStartBLModeForDriver

Version	NID
0.931.010-3.740.011	0x2CEF078E

int sceSysconBatteryStartBLModeForDriver(void);

sceSysconBatteryStopBLModeForDriver

Version	NID
0.931.010-3.740.011	0xE4AE7852

int sceSysconBatteryStopBLModeForDriver(void);

sceSysconBatterySetBLCommandForDriver

Version	NID
0.931.010-3.740.011	0xE4F29744

BL command (1 byte at most) must be contained in either unk_byte or pSrc.

int sceSysconBatterySetBLCommandForDriver(SceUInt16 ctx, SceUInt8 unk_byte, void *pSrc, SceUInt8 size);

sceSysconBatteryExecBLCommandForDriver

Version	NID
0.931.010-3.740.011	0x74B2AB55

int sceSysconBatteryExecBLCommandForDriver(SceUInt16 ctx);

sceSysconBatteryReadBLCommandForDriver

Version	NID
0.931.010-3.740.011	0x448DAFF1

// size must be between 0 and 0x10
int sceSysconBatteryReadBLCommandForDriver(SceUInt16 ctx, SceUInt8 unk1, SceUInt8 unk2, void *pDst, SceUInt8 size);

sceSysconGetManualChargeModeForDriver

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0x4FEC564C

int sceSysconGetManualChargeModeForDriver(int *piMode);

sceSysconCtrlManualChargeModeForDriver

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0xC6A2C9EF

int sceSysconCtrlManualChargeModeForDriver(int mode);

sceSysconSetClockForDriver

Version	NID
0.931.010-3.740.011	0x9B6A6F64

Calls Syscon command 0x81.

Sets current Syscon power on time in ticks of 0.5 second. The set value can be get with #sceSysconGetClockForDriver.

Used in SceRtc. Set to 0 just before setting Current Tick, to reset syscon power on time.

int sceSysconSetClockForDriver(SceUInt32 time);

SceSysconForDriver_51164951

Version	NID
0.931.010-3.740.011	0x51164951

Calls Syscon command 0x82. On Syscon version < 0x90907, 4 bytes are sent to Syscon, whilst on Syscon version >= 0x90907, 5 bytes are sent to Syscon.

Sets an alarm tick. The set tick can be get using Syscon command 0x12 via #SceSysconForDriver_3168F3AF.

Used in SceRtc#sceRtcSetAlarmTickForDriver.

// FW 0.931.010
int SceSysconForDriver_51164951(void *tick);

// FW 3.600.011-3.740.011
// tick_low: seen value: 0xffffffff during Syscon Init
// tick_hi: some 8-bit flag, seen value: 0 during Syscon Init
int SceSysconForDriver_51164951(SceUint32 tick_low, SceUInt8 tick_hi);

SceSysconForDriver_373ECF8A

Version	NID
0.931.010-0.940	not present
0.990.000-3.740.011	0x373ECF8A

Calls Syscon command 0x83. Sends 3 bytes to Syscon. Used only if Hardware Info indicates that the motherboard is not IRT-001 or IRT-002 or type 0x10 (maybe named IRS-001) and if console is not in manufacturing mode.

int SceSysconForDriver_373ECF8A(SceUInt32 unk);

SceSysconForDriver_2659535C

Version	NID
0.931.010	not present
0.990.000-3.740.011	0x2659535C

Calls Syscon command 0x84. Sends 1 byte to Syscon: 0.

int SceSysconForDriver_2659535C(void);

SceSysconForDriver_4295D497

Version	NID
0.931.010	not present
0.990.000-3.740.011	0x4295D497

Calls Syscon command 0x85. Sends 1 byte to Syscon: 0.

int SceSysconForDriver_4295D497(void);

sceSysconGetLogInfoForDriver

Version	NID
0.931.010-0.940	not present
0.990.000-3.740.011	0x701535FC

Calls Syscon command 0x86.

typedef struct SceSysconLogInfo { // size is 8 on FW 3.600.011
   uint8_t unk_0[8];
} SceSysconLogInfo;

int sceSysconGetLogInfoForDriver(SceSysconLogInfo *pInfo);

sceSysconLogStartForDriver

Version	NID
0.931.010-0.940	not present
0.990.000-3.740.011	0x4E55CF5E

Calls Syscon command 0x87. Sends 1 byte to Syscon: 0.

int sceSysconLogStartForDriver(void);

sceSysconLogReadDataForDriver

Version	NID
0.931.010-0.940	not present
0.996.090-3.740.011	0x487D97F3

Calls Syscon command 0x88.

int sceSysconLogReadDataForDriver(SceUInt16 offset, void *pData, SceSize size);

sceSysconLogStartWaitingForDriver

Version	NID
0.931.010-2.12	not present
2.500.071-3.740.011	0x9C0B1E61

Calls Syscon command 0x89.

int sceSysconLogStartWaitingForDriver(void);

sceSysconCtrlUSBSupplyForDriver

Version	NID
3.600.011-3.740.011	0x7BFA95DA

This function is used instead of #sceSysconCtrlChargeVBUSForDriver on PS Vita Slim.

Calls Syscon command 0x8C8. Sends 1 byte to Syscon. Gets 0 byte from Syscon.

Used in factTest module.

int sceSysconCtrlUSBSupplyForDriver(SceUInt8 data);

SceSysconForDriver_451C1662

Version	NID
3.600.011-3.740.011	0x451C1662

Calls Syscon command 0x8C9. Sends 1 byte to Syscon. Gets 0 byte from Syscon.

int SceSysconForDriver_451C1662(SceUInt8 data);

SceSysconForDriver_79074DE4

Version	NID
3.600.011-3.740.011	0x79074DE4

Calls Syscon command 0x8CA. Sends 0 byte to Syscon. Gets 1 bytes from Syscon: data.

int SceSysconForDriver_79074DE4(SceUInt8* pData);

SceSysconForDriver_7D25F6D2

Version	NID
3.600.011-3.740.011	0x7D25F6D2

Calls Syscon command 0x8CB. Sends 1 byte to Syscon: id. Gets 1 bytes from Syscon: data.

int SceSysconForDriver_7D25F6D2(SceUInt8 id, SceUInt8* pData);

SceSysconForDriver_D2ADABCA

Version	NID
3.600.011-3.740.011	0xD2ADABCA

Calls Syscon command 0x8CC. Sends 2 bytes from Syscon: id, data.

int SceSysconForDriver_D2ADABCA(SceUInt8 id, SceUInt8 data);

sceSysconGetTemperatureLogForDriver

Version	NID
0.931.010-2.12	not present
2.500.071-3.740.011	0x3B354824

Calls Syscon command 0x8CE. Gets 0x10 bytes from Syscon.

typedef struct SceSysconTemperatureLog { // size is 0x10 bytes
    char log[16];
} SceSysconTemperatureLog;

int sceSysconGetTemperatureLogForDriver(SceSysconTemperatureLog *pLog);

sceSysconClearTemperatureLogForDriver

Version	NID
0.931.010-2.12	not present
2.500.071-3.740.011	0x3843D657

Calls Syscon command 0x8CF. Sends 2 bytes to Syscon.

int sceSysconClearTemperatureLogForDriver(SceUInt32 unk);

SceSysconForDriver_F87679EE

Version	NID
0.931.010-2.12	not present
3.600.011-3.740.011	0xF87679EE

Calls Syscon command 0x8D0. Sends 2 bytes to Syscon.

Probably related to Syscon Temperature Log.

int SceSysconForDriver_F87679EE(SceUInt32 unk);

sceSysconGetUsbDetStatusForDriver

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0xEF810687

Calls Syscon command 0x805.

Maybe supported by PS TV or PS Vita Slim only.

int sceSysconGetUsbDetStatusForDriver(SceUInt32 *pStatus);

SceSysconForDriver_E7F5D3DC

Version	NID
0.931.010-1.692.000	not present
2.100.081-3.740.011	0xE7F5D3DC

Calls Syscon command 0x806.

Maybe supported by PS TV or PS Vita Slim only.

On PS TV returns data 0x00000000

int SceSysconForDriver_E7F5D3DC(SceUInt32 *pResult);

SceSysconForDriver_253CC522

Version	NID
0.931.010-1.692.000	not present
2.100.081-3.740.011	0x253CC522

Calls Syscon command 0x807. Gets 2 bytes from Syscon.

On DevKit, it returns 0x8025023F. Maybe supported by PS TV or PS Vita Slim only.

On PS TV returns data 0xca1a

int SceSysconForDriver_253CC522(SceUInt16 *pResult);

sceSysconCtrlDolceLEDForDriver

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0x727F985A

This is a guessed name.

#define STATE_ON 0
#define STATE_BLINK_SLOW 1
#define STATE_BLINK_FAST 2

int sceSysconCtrlDolceLEDForDriver(SceUInt32 state);

sceSysconGetTimeStampForDriver

Version	NID
0.931.010-3.740.011	0x4D588A0A

This is a guessed named, derived from PSP. Temp name was sceSysconGetBaryonTimestampForDriver.

Returns the timestamp of latest installed Syscon firmware patch, formatted as YYYYMMDDhhmm. This comes from a string stored in Syscon firmware under another format: $Date:: YYYY-MM-DD hh:mm:ss +0900#$

Example: $Date:: 2013-12-13 15:52:05 +0900#$ in Syscon firmware becomes 201312131552 in Syscon command 2.

// pTimestamp will point to a buffer of size 0x10 bytes, containing a string of size 13 (12: length + 1: terminal character)
int sceSysconGetTimeStampForDriver(char *pTimestamp);

sceSysconGetWakeupFactorForDriver

Version	NID
0.931.010-3.740.011	0xCF5B2F2F

Result is 2 bytes wakeup factor coming from Syscon command 0x10.

Used in SceWlanBt.

int sceSysconGetWakeupFactorForDriver(SceUInt32 *pWakeupFactor);

sceSysconCtrlHdmiCecPowerForDriver

Version	NID
0.931.010-3.740.011	0x62155962

If Syscon version is strictly lower than 0x40000, it does nothing and returns 0.

Sets the pin CDC Hot Plug Detect (HPD) state of the HDMI bridge (AD80244 / ADV7533).

int sceSysconCtrlHdmiCecPowerForDriver(SceBool enable_HDMI_CDC_HPD_pin);

sceSysconCtrlMotionSensorPowerForDriver

Version	NID
0.931.010-3.740.011	0x063425AE

This is a guessed name.

If Syscon version is strictly lower than 0x40000, it does nothing and returns 0.

int sceSysconCtrlMotionSensorPowerForDriver(SceBool enable);

SceSysconForDriver_3FDD29D6

Version	NID
0.931.010-3.740.011	0x3FDD29D6

Calls Syscon command 0x884. Sends 2 bytes to Syscon.

int SceSysconForDriver_3FDD29D6(int value, SceBool use_flag);

SceSysconForDriver_79E6DD8B

Version	NID
0.931.010-3.740.011	0x79E6DD8B

Calls Syscon command 0x885. Sends 2 bytes to Syscon.

int SceSysconForDriver_79E6DD8B(int value, SceBool use_flag);

sceSysconCtrlVoltageForDriver

Version	NID
0.920.050-3.740.011	0x7F198FA2

Temp name was sceSysconSetVoltageForDriver.

Calls Syscon command 0x88E.

Used in ScePower.

/*
type:
0: Reserved
1: DD1 (VDD - IFTU, DMAC, Internal bus, SPM 32KiB/128KiB) SetSysClockFrequency, SetDmac5ClockFrequency, SetBusClockFrequency, SetCameraBusClockFrequency
2: DD2 (VDDA - ARM core, L2 cache) SetArmClockFrequency
3: DD3 (VDDC - Codec Engine, AVC Decoder) SetVipClockFrequency, SetVeneziaClockFrequency
4: DD4 (VDDG - GPU core) SetGpuClockFrequencyInternal, SetGpuXbarClockFrequency, SetCompatClockFrequency

vid:
0x22 (0.34V)
0x8A (1.38V) - (something got from ScePervasiveForDriver)
*/

#define SCE_SYSCON_VOLTAGE_DD1 (1)
#define SCE_SYSCON_VOLTAGE_DD2 (2)
#define SCE_SYSCON_VOLTAGE_DD3 (3)
#define SCE_SYSCON_VOLTAGE_DD4 (4)

int sceSysconCtrlVoltageForDriver(SceUInt32 type, SceUInt32 vid);

sceSysconSetPowerModeForDriver

Version	NID
0.931.010-3.740.011	0x8A95D35C

Temp name was sceSysconResetDeviceForDriver.

It issues SMC 0x11A.

The mode argument is usually set to 0x2 or sometimes 0x8002 (which seems to correspond to some request by the UDC and BT drivers).

The type argument determines what to do.

Real definition names are like: "SCE_SYSCON_POWERMODE_MODE_STANDBY".

Type	Description	Syscon command arguments `{cmd_no_low, cmd_no_hi, args_size, args}`
0	Power off	`{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}`
1	Suspend (low-power state)	`{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}`
2	Reset (cold reset)	`{0x01, 8, 1, 0}`
3	Reset to external boot mode	`{0xC1, 0, 2, 0}`
4	?Reset to update mode?	`{0xC1, 0, 2, 1}`
5	Hibernate	`{0xC2, 0, 2, 0x5A}`
16	?Resume?	`{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}`
17	Resume (soft reset: suspend and immediately resume)	`{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}`

int sceSysconSetPowerModeForDriver(int type, int mode);

sceSysconEnableHibernateIOForDriver

Version	NID
0.931.010-0.940	not present
0.990.000-3.740.011	0x4946538A

int sceSysconEnableHibernateIOForDriver(int maybe_enable);

sceSysconWaitReadyForDriver

Version	NID
0.931.010-0.940	not present
0.996.090-3.740.011	0x55DF1C9B

Temp name was sceSysconWaitInitializedForDriver.

int sceSysconWaitReadyForDriver(void);

sceSysconCmdSyncForDriver

Version	NID
0.931.010-3.740.011	0x6E517D22

int sceSysconCmdSyncForDriver(SceSysconPacket *packet, int noWait);

sceSysconCmdExecForDriver

Version	NID
0.931.010-3.740.011	0x9ADDCA4A

int sceSysconCmdExecForDriver(SceSysconPacket *packet, unsigned int flags);

sceSysconCmdExecAsyncForDriver

Version	NID
0.931.010-3.740.011	0xC2224E82

int sceSysconCmdExecAsyncForDriver(SceSysconPacket *packet, u32 flags, int (*callback)(SceSysconPacket *, void *), void *argp);

sceSysconCtrlSdPowerForDriver

Version	NID
0.931.010-3.740.011	0xBE1ADE4F

If Syscon version is strictly lower than 0x40000, it does nothing and returns 0. Calls Syscon command 0x888.

Enables/disables GameCard reader.

Used in SceSdstor.

// param: 1 = enable SD (GameCard reader) power, 0 = disable SD (GameCard reader) power
int sceSysconCtrlSdPowerForDriver(SceUInt16 param);

sceSysconCtrlWirelessPowerForDriver

Version	NID
0.931.010-0.995.000	0x4FBDA504
0.996.090-3.740.011	not present

If Syscon version is strictly lower than 0x40000, it does nothing and returns 0. Calls Syscon command 0x88A.

Replaced by function #sceSysconCtrlWirelessPower2ForDriver.

int sceSysconCtrlWirelessPowerForDriver(SceUInt16 param);

sceSysconCtrlWirelessPower2ForDriver

Version	NID
0.931.010-0.940	not present
0.996.090-3.740.011	0xA2E85DB9

Replacement function for #sceSysconCtrlWirelessPowerForDriver. Calls Syscon command 0x88A.

Used in SceWlanBt:

        scePowerSetWakeupConditionForDriver(4, 0);
        uVar2 = 0;
        sceSysconCtrlDeviceResetForDriver(0x10, 0);
        sceSysconCtrlWirelessPower2ForDriver(0);
        sceClockgenWlanBtClkDisableForDriver();

int sceSysconCtrlWirelessPower2ForDriver(SceUInt16 enable);

sceSysconCtrlWirelessPowerDownForDriver

Version	NID
0.931.010-0.995.000	0xDF8C6D2D
0.996.090-3.740.011	not present

If motherboard is not "hardware info third byte 0x10" (probably IRS-001), it does nothing and returns 0, probably because missing hardware. Calls Syscon command 0xB1. Wireless power down might be a button to enable/disable Wireless, like on PSP.

int sceSysconCtrlWirelessPowerDownForDriver(SceUInt16 param);

sceSysconGetConfigStorageInfoForDriver

Version	NID
0.995.000-3.740.011	0xCE48E8EB

Get Syscon Config Storage Info using Syscon command 0x1300.

Config Storage Info is part of the Syscon "ConfZZ" header.

typedef struct SceKernelConfigStorageInfo { // size is 8 bytes
    SceUInt16 version;
    SceUInt16 unk_2;
    SceUInt32 unk_4;
} SceKernelConfigStorageInfo;

int sceSysconGetConfigStorageInfoForDriver(SceKernelConfigStorageInfo *pInfo);

sceSysconLoadConfigstorageScriptForDriver

Version	NID
0.931.010-0.990.000	not present
0.995.000-3.740.011	0x89C5CFD6

Calls Syscon command 0x1385.

The OS uses this function to change between modes: IDU mode, Show Mode, no mode. This works by spoofing or rewriting Hardware Info. This is reboot persistent.

int sceSysconLoadConfigstorageScriptForDriver(int a1, void *pScript, SceSize size);

sceSysconVerifyConfigstorageScriptForDriver

Version	NID
0.931.010-0.990.000	not present
0.995.000-3.740.011	0xCC6F90A8

Calls Syscon command 0x1386.

This function is not used in the OS and anyway it would always return error because it calls a command that is not implemented in Syscon FW.

int sceSysconVerifyConfigstorageScriptForDriver(int a1, void *pScript, SceSize size);

SceSysconForDriver_FD65FFCB

Version	NID
3.600.011-3.740.011	0xFD65FFCB

Calls Syscon command 0x1392.

int SceSysconForDriver_FD65FFCB(SceUInt8 offset, SceUInt16 a2);

sceSysconBeginConfigstorageTransactionForDriver

Version	NID
0.931.010	not present
0.990.000-3.740.011	0xA4968B8C

int sceSysconBeginConfigstorageTransactionForDriver(void);

sceSysconCommitConfigstorageTransactionForDriver

Version	NID
0.931.010	not present
0.990.000-3.740.011	0x7B9B3617

int sceSysconCommitConfigstorageTransactionForDriver(void);

sceSysconEndConfigstorageTransactionForDriver

Version	NID
0.931.010	not present
0.990.000-3.740.011	0xFCC3E8EE

int sceSysconEndConfigstorageTransactionForDriver(void);

sceSysconSetDebugHandlersForDriver

Version	NID
0.931.010-3.740.011	0xF245CD6F

/** A set of debug handlers for syscon, that you can set in sceSysconSetDebugHandlersForDriver(). */
typedef struct SceSysconDebugHandlers {
    /** Structure size (probably, unused). */
    s32 size;
    /** Callback ran right before running a packet, with a pointer to it passed as the first argument. */
    void (*start)(SceSysconPacket *packet);
    /** Callback ran right after finishing running a packet, with a pointer to it passed as the first argument. */
    void (*end)(SceSysconPacket *packet);
} SceSysconDebugHandlers;

int sceSysconSetDebugHandlersForDriver(SceSysconDebugHandlers *debug_handlers);

sceSysconGetBatteryCalibDataForDriver

Version	NID
0.931.010-3.36	not present
3.500.011-3.740.011	0x9ADC9936

int sceSysconGetBatteryCalibDataForDriver(int *piData1, int *piData2, int *piData3, int *piData4);

sceSysconGetTouchpanelDeviceInfoForDriver

Version	NID
0.931.010-3.740.011	0xF492E69E

typedef struct SceKernelTouchpanelDeviceInfo { // size is 8 bytes
  uint16_t FrontVendorID;
  uint16_t FrontFirmwareRev;
  uint16_t RearVendorID;
  uint16_t RearFirmwareRev;
} SceKernelTouchpanelDeviceInfo;

int sceSysconGetTouchpanelDeviceInfoForDriver(SceKernelTouchpanelDeviceInfo *pInfo);

sceSysconGetTouchpanelDeviceInfo2ForDriver

Version	NID
0.931.010-1.50	not present
1.690.011-3.740.011	0x030D447F

This is a guessed name.

Returns extended touchpanel info.

// this is a guessed name
typedef struct SceKernelTouchpanelInfo { // size is 0xA bytes
	SceUInt16 vendorID;
	SceUInt16 firmwareRev;
	SceUInt16 configRev;
	SceUInt8 hwVersion;
	SceUInt8 vendorInfo;
	SceUInt16 reserved;
} SceKernelTouchpanelInfo;

// this is a guessed name
typedef struct SceKernelTouchpanelDeviceInfo2 { // size is 0x14 bytes
	SceKernelTouchpanelInfo front;
	SceKernelTouchpanelInfo rear;
} SceKernelTouchpanelDeviceInfo2;

int sceSysconGetTouchpanelDeviceInfo2ForDriver(SceKernelTouchpanelDeviceInfo2 *pInfo);

sceSysconMotionGetMeasureDataForDriver

Version	NID
0.931.010-3.740.011	0x270B7B0B

Calls Syscon command 0x400.

sceSysconMotionGetDeviceInfoForDriver

Version	NID
0.931.010-3.740.011	0xD01E64FC

Returns motion sensor device info.

Calls Syscon command 0x480.

See SceMotionDev#sceMotionDevGetDeviceInfoForDriver for the SceKernelMotionDeviceInfo structure.

int sceSysconMotionGetDeviceInfoForDriver(SceKernelMotionDeviceInfo *pInfo);

SceSysconForDriver_9A7858B6

Version	NID
0.931.010-3.740.011	0x9A7858B6

Calls Syscon command 0x481. Sends 3 bytes to Syscon.

Probably used to send information to the motion sensor device.

int SceSysconForDriver_9A7858B6(SceBool a1, SceUint16 a2);

sceSysconGetHardwareInfoForDriver

Version	NID
0.931.010-3.740.011	0xCBD6D8BC

Returns Hardware Info obtained from Syscon command 0x5.

int sceSysconGetHardwareInfoForDriver(void);

sceSysconGetHardwareInfo2ForDriver

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0x965C68C3

Returns Hardware Info 2 obtained from Syscon command 0x6.

This function was certainly added for PS Vita Slim or PS TV support because Hardware Info risked being fulfilled if too many hardware revisions were made.

Used in SceAudioIn (maybe to check Conexant IC), SceCodec (maybe to check Conexant IC), and _vshSysconGetHardwareInfo2.

typedef struct SceKernelHardwareInfo2 {
  SceUInt8 flags[0x10];
} SceKernelHardwareInfo2;

int sceSysconGetHardwareInfo2ForDriver(SceKernelHardwareInfo2 *pInfo);

sceSysconGetErnieVersionForDriver

Version	NID
0.931-3.740.011	0xFF86F4C5

This is a guessed name. Temp name was sceSysconGetBaryonVersionForDriver.

int sceSysconGetErnieVersionForDriver(void);

SceSysconForDriver_EBE3262C

Version	NID
0.931.010-0.940	not present
0.996.090-3.740.011	0xEBE3262C

In SceSblPostSsMgr, used just after #sceSysconGetErnieVersionForDriver.

Returns 8 bits of some Syscon Mode information. Bit 6 (from right) is Syscon DownLoader Mode flag. Bit 3 (from right) is Power Online flag.

SceUInt8 SceSysconForDriver_EBE3262C(void);

sceSysconIsDownLoaderModeForDriver

Version	NID
0.931.010	not present
0.990.000-3.740.011	0x9ADD60D2

int sceSysconIsDownLoaderModeForDriver(void);

sceSysconIsDealDownLoaderModeForDriver

Version	NID
0.931.010-3.740.011	0xB7BCC638

int sceSysconIsDealDownLoaderModeForDriver(void);

sceSysconNopForDriver

Version	NID
0.931.010-3.740.011	0x0D0B6D25

int sceSysconNopForDriver(void);

sceSysconIsPowerOnlineForDriver

Version	NID
0.931.010-3.740.011	0x9DA2A5AB

Returns true iff Syscon information bit 3 (from right) is set. See also #SceSysconForDriver_EBE3262C.

Used in many ScePower functions for example before setting display brightness (to save battery).

SceBool sceSysconIsPowerOnlineForDriver(void);

sceSysconGetErnieDLVersionForDriver

Version	NID
0.931.010-3.740.011	0xD2F456DC

Calls Syscon command 0x1100.

void sceSysconGetErnieDLVersionForDriver(SceUInt32 *pVersion);

sceSysconGetBatteryVersionForDriver

Version	NID
0.931.010-3.740.011	0x68E0031E

Battery IC codename: if HWinfo > 7 "Abby" else unknown codename, maybe just "Bic".

int sceSysconGetBatteryVersionForDriver(SceUInt16 *HWinfo, SceUInt16 *FWinfo, SceUInt16 *DFinfo);

sceSysconReadCookieStatusForDriver

Version	NID
0.931.010-1.81	not present
2.000.081-3.740.011	0xDFB024C4

This is a guessed name.

Temp name was sceSysconAbbySyncForDriver.

int sceSysconReadCookieStatusForDriver(SceUInt32 *puiStatus);

sceSysconGetManufacturesStatusForDriver

Version	NID
0.931.010-1.692.000	not present
1.800.071-3.740.011	0x3E09A1F4

In theory, this function should only be called when Product Mode is already set.

int sceSysconGetManufacturesStatusForDriver(int *piStatus);

sceSysconReadScratchPadForDriver

Version	NID
0.931.010-3.740.011	0x299B1CE7

Temp name was sceSysconReadCommandForDriver, sceSysconVsReadDataForDriver.

Calls Syscon command 0x90.

Used in SceRtc.

sceSysconWriteScratchPadForDriver

Version	NID
0.931.010-3.740.011	0xE26488B9

Temp name was sceSysconSendCommandForDriver, sceSysconVsWriteDataForDriver.

Calls Syscon command 0x91.

Used in SceRtc and ScePower.

sceSysconNvsSetRunModeForDriver

Version	NID
0.931.010-3.740.011	0x81A6060D

Used in sceSblNvsReadDataForKernel and sceSblNvsWriteDataForKernel.

// mode: 0 before NVS read/write
int sceSysconNvsSetRunModeForDriver(int mode);

sceSysconNvsSetUnkModeForDriver

Version	NID
0.931.010-3.740.011	0x2EC6D55D

// mode: unk
int sceSysconNvsSetUnkModeForDriver(int mode);

sceSysconNvsReadDataForDriver

Version	NID
0.931.010-3.740.011	0xACAFA2B8

Used in sceSblNvsReadDataForKernel and sceSblSsGetNvsDataForDriver.

int sceSysconNvsReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);

sceSysconNvsWriteDataForDriver

Version	NID
0.931.010-3.740.011	0x10C9657A

Used in sceSblNvsWriteDataForKernel and sceSblSsSetNvsDataForDriver.

int sceSysconNvsWriteDataForDriver(SceUInt32 offset, void *buffer, SceSize size);

sceSysconGetMultiCnInfoForDriver

Version	NID
0.931.010-3.740.011	0x1503D6A0

Returns data obtained by Syscon command 0x103.

Returns 0x4ff00 when nothing is connected.

Returns 0x40080 when pin 12 is pulled to GND while pin 11 pulled to GND. MultiCn host mode enabled

Returns 0x40180 when pin 12 is pulled to GND while pin 11 pulled to GND via 25K resistor. MultiCn host mode disabled

Returns 0x40280 when pin 12 is pulled to GND while pin 11 pulled to GND via 50K resistor. MultiCn host mode disabled

Returns 0x40380 when pin 12 is pulled to GND while pin 11 pulled to GND via 75K resistor. MultiCn host mode disabled. Sets "dock" flag in hpremote

Returns 0x40480 when pin 12 is pulled to GND while pin 11 pulled to GND via 200K resistor. MultiCn host mode enabled

Returns 0x40580 when pin 12 is pulled to GND while pin 11 pulled to GND via 325K resistor. MultiCn host mode disabled

Returns 0x40680 when pin 12 is pulled to GND while pin 11 is floating. MultiCn host mode disabled

Returns 0x40000 on PSTV

Bits 8 and 9 indicate that an audio-out dock is connected.

Bits 8, 9, 11, 12, 13, 14 and 15 indicate that UDC pins are connected.

Used in SceHpremote, SceUsbServ.

int sceSysconGetMultiCnInfoForDriver(SceUInt32 *pInfo);

sceSysconSetMultiCnPortForDriver

Version	NID
0.931.010-3.740.011	0x8AAB6308

Used in SceSblPostSsMgr.

// port: 0: for Jig mode, 1 for UART0 logging mode, 0x10000: for normal mode
int sceSysconSetMultiCnPortForDriver(int port);

sceSysconCtrlLedPwmBlinkForDriver

Version	NID
0.996.090-3.740.011	0x6F586D1A

Used in ScePower.

#define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue)

// unk: SceLedConfig.unk_4

int sceSysconCtrlLedPwmBlinkForDriver(int device, SceUInt32 unk);

sceSysconSetChargeLedCtrlForDriver

Version	NID
0.931.010	not present
1.000.071-3.740.011	0x9CA6EB70

This is a guessed name.

On motherboards IRT-001 and older, it does nothing and returns 0, probably because missing hardware that could be a LED, else it sends 2 bytes using Syscon command 0x89E.

Used in ScePower#ScePowerForDriver_38415146. Related to LED.

int sceSysconSetChargeLedCtrlForDriver(SceBool state);

sceSysconCtrlAccPowerForDriver

Version	NID
0.931-3.60	0x8D1D97E8

int sceSysconCtrlAccPowerForDriver(SceBool enable);

sceSysconCtrlUsbStatusForDriver

Version	NID
0.931-3.60	0x59DC5938

Sends 3 bytes to Syscon command 0x89A.

Related to SceUdcd and ScePower.

int sceSysconCtrlUsbStatusForDriver(SceUInt32 value);

sceSysconCtrlRMRPowerForDriver

Version	NID
0.931.010	not present
0.990.000-3.740.011	0x710A7CF0

Temp name was sceSysconCtrlMsPowerForDriver.

int sceSysconCtrlRMRPowerForDriver(int enable_power);

sceSysconCtrlMultiCnPowerForDriver

Version	NID
0.931.010-0.940	not present
0.990.000-3.740.011	0xB1F88B11

int sceSysconCtrlMultiCnPowerForDriver(SceBool enable);

SceSysconForDriver_3274A925

Version	NID
0.931.010-1.692.000	not present
1.800.071-3.740.011	0x3274A925

Temp name was sceSysconCtrlDolceUsbPowerForDriver.

This function enables/disables a USB bus related to either PS Vita IRS-1001 Wlan/Bt module USB or PS Vita 3G modem USB. This also affects PS TV USB host and maybe also PS TV ethernet.

Used in SceUsbEtherSmsc, SceUsbServ.

This function was maybe added to support IRS-1001 motherboard.

int SceSysconForDriver_3274A925(SceBool enable);

sceSysconJigOpenPortForDriver

Version	NID
0.931.010-3.740.011	0x44A173F5

int sceSysconJigOpenPortForDriver(void);

sceSysconJigClosePortForDriver

Version	NID
0.931.010-3.740.011	0x483FAE05

int sceSysconJigClosePortForDriver(void);

sceSysconJigSetConfigForDriver

Version	NID
0.931.010-3.740.011	0xD24BF916

int sceSysconJigSetConfigForDriver(SceUInt8 a1, SceUInt8 a2);

sceSysconOutputClockForDriver

Version	NID
0.990.000-3.740.011	0x058941D7

Sends 2 bytes to Syscon using Syscon command 0xB0.

sceSysconCtrlHostOutputViaDongleForDriver

Version	NID
0.931.010	not present
0.990.000-3.740.011	0xDECCB2B4

Enables / disables Kermit UART0 output (logs) via Dongle (Jig).

Sends 2 bytes to Syscon using Syscon command 0xB2.

int sceSysconCtrlHostOutputViaDongleForDriver(SceBool enable);

SceSysconForDriver_33B5CDB3

Version	NID
0.996.090-3.740.011	0x33B5CDB3

Reads from Syscon using Syscon command 0xB3.

This function was probably added to support IRS-002 motherboard.

SceSysconForDriver_F6D4DDC4

Version	NID
0.931.010-1.692.000	not present
1.800.071-3.740.011	0xF6D4DDC4

Guessed name is sceSysconGetWlanGpioStateForDriver

Reads from Syscon using Syscon command 0xB4. It is probably the "get" equivalent of #SceSysconForDriver_00AE3AEB.

This function was added to support IRS-1001 motherboard.

SceSysconForDriver_00AE3AEB

Version	NID
0.931.010-1.692.000	not present
1.800.071-3.740.011	0x00AE3AEB

Guessed name is sceSysconSetWlanGpioStateForDriver

Sends 2 bytes to Syscon using Syscon command 0xB5. It is probably the "set" equivalent of #SceSysconForDriver_F6D4DDC4.

This function was added to support IRS-1001 motherboard.

SceSysconForDriver_0D300158

Version	NID
3.100.081-3.740.011	0x0D300158

It is probably a "sceSysconCtrl...ForDriver" function.

Sends 2 bytes to Syscon using Syscon command 0xB6. It is probably the "set" equivalent of #SceSysconForDriver_91EF4EC3.

This function was added to support DOL-1002 motherboard.

SceSysconForDriver_91EF4EC3

Version	NID
3.100.081-3.740.011	0x91EF4EC3

Reads from Syscon using Syscon command 0xB7. It is probably the "get" equivalent of #SceSysconForDriver_0D300158.

This function was added to support DOL-1002 motherboard.

receive_pm_sm_jig_msg_from_syscon

Version	NID
0.931.010-3.740.011	0x3C80B529

Calls Syscon command 0x2083.

int receive_pm_sm_jig_msg_from_syscon(SceUInt8 offset, SceUInt8 size, void *pMsg);

send_pm_sm_jig_short_msg_to_syscon

Version	NID
3.600.011-3.740.011	0xCE346793

Calls Syscon command 0x2084.

Sends a message of maximum 0x18 bytes.

int send_pm_sm_jig_short_msg_to_syscon(SceUInt8 size, void *pMsg);

send_pm_sm_jig_msg_to_syscon

Version	NID
0.931.010-3.740.011	0x7BFBA09E

Calls Syscon command 0x2085.

Sends a message by chunks of 0x18 bytes.

int send_pm_sm_jig_msg_to_syscon(SceUInt8 a1, SceUInt8 offset, SceUInt8 size, void *pMsg);

send_pm_sm_stop_to_syscon

Version	NID
0.931.010-3.740.011	0x933D813F

Calls Syscon command 0x2085.

Used just after send_pm_sm_jig_msg_to_syscon or when it fails before.

int send_pm_sm_stop_to_syscon(SceUInt8 a1, SceUInt8 offset, SceUInt8 size);

sceSysconIduModeSetForDriver

Version	NID
0.931.010-0.996.090	not present
1.030.071-3.740.011	0x956D07CB

int sceSysconIduModeSetForDriver(void);

sceSysconIduModeClearForDriver

Version	NID
0.931.010-0.996.090	not present
1.030.071-3.740.011	0x34574496

int sceSysconIduModeClearForDriver(void);

sceSysconShowModeSetForDriver

Version	NID
0.931.010-1.50	not present
1.600.061-3.740.011	0x6D65B70F

int sceSysconShowModeSetForDriver(void);

sceSysconShowModeClearForDriver

Version	NID
0.931.010-1.50	not present
1.600.061-3.740.011	0x8D7724C0

int sceSysconShowModeClearForDriver(void);

sceSysconSetWlanCallbackForDriver

Version	NID
0.931.010-0.996.090	0x4DEB8712
1.03-3.740.011	not present

This is a guessed name.

Registers a Wlan-related callback.

index 5 on FWs 0.931.010-0.940.

SceSysconForDriver_18A6F4D9

Version	NID
0.990.000-3.740.011	0x18A6F4D9

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0 on FW 3.600.011.

No use case seen.

int SceSysconForDriver_18A6F4D9(void *cb_0, void *cb_1);

SceSysconForDriver_DE613081

Version	NID
0.990.000-3.740.011	0xDE613081

A guessed name is sceSysconSetHeadphoneCallbackForDriver.

Registers an headphone remote related callback.

index 1 on FW 3.600.011.

Used in SceHpremote.

int SceSysconForDriver_DE613081(void *cb_0, void *cb_1);

SceSysconForDriver_229A07C2

Version	NID
0.990.000-3.740.011	0x229A07C2

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 2 on FW 3.600.011.

No use case seen.

int SceSysconForDriver_229A07C2(void *cb_0, void *cb_1);

SceSysconForDriver_8351526D

Version	NID
0.990.000-3.740.011	0x8351526D

A guessed name is sceSysconSetAlarmTimerCallbackForDriver.

Registers a callback.

index 3 on FW 3.600.011.

Used in SceRtc.

int SceSysconForDriver_8351526D(void *cb_0, void *cb_1);

SceSysconForDriver_9F8340FF

Version	NID
0.990.000-3.740.011	0x9F8340FF

A guessed name is sceSysconSetResumeRequestCallbackForDriver.

Registers the "is resume requested" callback.

Used in ScePower to register a callback that sets the ScePower global variable g_resume_requested to SCE_TRUE.

index 4 on FW 3.600.011.

int SceSysconForDriver_9F8340FF(void *cb_0, void *cb_1);

SceSysconForDriver_35E1689F

Version	NID
0.990.000-3.740.011	0x35E1689F

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback, maybe dock callback, but not remote callback.

Used in SceHpremote.

index 5 on FW 3.600.011.

int SceSysconForDriver_35E1689F(void *cb_0, void *cb_1);

SceSysconForDriver_474A9EA7

Version	NID
0.931.010-3.740.011	0x474A9EA7

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0xC on FWs 0.931.010-0.940. index 6 on FW 3.600.011.

No use case seen.

int SceSysconForDriver_474A9EA7(void *cb_0, void *cb_1);

SceSysconForDriver_4E88B4D9

Version	NID
0.990.000-3.740.011	0x4E88B4D9

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 8 on FW 3.600.011.

Used in SceBbmc

int SceSysconForDriver_4E88B4D9(void *cb_0, void *cb_1);

SceSysconForDriver_376CCCB8

Version	NID
0.990.000-3.740.011	0x376CCCB8

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 9 on FW 3.600.011.

No use case seen.

int SceSysconForDriver_376CCCB8(void *cb_0, void *cb_1);

SceSysconForDriver_3BAAC8A9

Version	NID
0.931.010-0.995.000	not present
0.996.090-3.740.011	0x3BAAC8A9

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0xA on FW 3.600.011.

No use case seen.

int SceSysconForDriver_3BAAC8A9(void *cb_0, void *cb_1);

sceSysconSetAccCallbackForDriver

Version	NID
0.931.010-0.940	not present
0.995.000-3.740.011	0x4A42712F

This is a guessed name.

Registers 2 callbacks (maybe constructor and destructor or callback and args) for accessory port.

index 0xF on FW 3.600.011.

Used in SceUsbServ.

int sceSysconSetAccCallbackForDriver(void *cb_0, void *cb_1);

sceSysconSetLowBatteryCallbackForDriver

Version	NID
0.931.010-3.740.011	0x3F0DB7C0

Registers the low-battery callback.

index 6 on FWs 0.931-0.940. index 0x10 on FW 3.600.011.

int sceSysconSetLowBatteryCallbackForDriver(void *cb_0, void *cb_1);

SceSysconForDriver_80D6E061

Version	NID
1.000.071-3.740.011	0x80D6E061

A guessed name is sceSysconSetBatteryOnlineCallbackForDriver.

Registers a callback. Maybe related to Battery online status.

index 0x11 on FW 3.600.011.

int SceSysconForDriver_80D6E061(void *cb_0, void *cb_1);

SceSysconForDriver_7682FE69

Version	NID
1.000.071-3.740.011	0x7682FE69

A guessed name is sceSysconSet...Battery...CallbackForDriver.

Registers a battery-related callback.

No use case seen.

index 0x12 on FW 3.600.011.

int SceSysconForDriver_7682FE69(void *cb_0, void *cb_1);

SceSysconForDriver_E0D52DF0

Version	NID
0.990.000-3.740.011	0xE0D52DF0

A guessed name is sceSysconSet...Battery...CallbackForDriver.

Registers a battery-related callback.

No use case seen.

index 0x13 on FW 3.600.011.

int SceSysconForDriver_E0D52DF0(void *cb_0, void *cb_1);

SceSysconForDriver_2D471528

Version	NID
0.931.010-0.940	not present
1.000.071-3.740.011	0x2D471528

A guessed name is sceSysconSet...Battery...CallbackForDriver.

Registers a callback very similar to the low battery callback.

Used in ScePower.

index 0x14 on FW 3.600.011.

int SceSysconForDriver_2D471528(void *cb_0, void *cb_1);

SceSysconForDriver_129EA022

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0x129EA022

A guessed name is sceSysconSet...CallbackForDriver.

Used in ScePower.

index 0x15 on FW 3.600.011.

int SceSysconForDriver_129EA022(void *cb_0, void *cb_1);

SceSysconForDriver_85E5DEBF

Version	NID
0.931.010-0.996.090	not present
1.000.071-3.740.011	0x85E5DEBF

A guessed name is sceSysconSet...CallbackForDriver.

index 0x16 on FW 3.600.011.

Used by SceBbmc

int SceSysconForDriver_85E5DEBF(void *cb_0, void *cb_1);

sceSysconSetThermalAlertCallbackForDriver

Version	NID
0.931.010-0.996.090	not present
1.000.071-3.740.011	0x773B8126

Registers the thermal alert callback.

index 0x17 on FW 3.600.011.

int sceSysconSetThermalAlertCallbackForDriver(void *cb_0, void *cb_1);

SceSysconForDriver_2E4BA4B8

Version	NID
0.990.000-3.740.011	0x2E4BA4B8

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x19 on FW 3.600.011.

No use case seen. Maybe used in internal modules for Jig.

int SceSysconForDriver_2E4BA4B8(void *cb_0, void *cb_1);

SceSysconForDriver_C442D0BE

Version	NID
0.931.010-1.692.000	not present
1.800.071-3.740.011	0xC442D0BE

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x1A on FW 3.600.011.

No use case seen.

int SceSysconForDriver_C442D0BE(void *cb_0, void *cb_1);

SceSysconForDriver_61AE3970

Version	NID
0.931.010-3.01	not present
3.100.081-3.740.011	0x61AE3970

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x1B on FW 3.600.011.

No use case seen.

int SceSysconForDriver_61AE3970(void *cb_0, void *cb_1);

sceSysconSetLowBatteryInhibitUpdateRebootCallbackForDriver

Version	NID
0.931.010-3.18	not present
3.300.041-3.740.011	0x94678881

This is a guessed name.

Registers the low-battery-inhibit-update-reboot callback.

index 0x1C on FW 3.600.011.

No use case seen.

int sceSysconSetLowBatteryInhibitUpdateRebootCallbackForDriver(void *cb_0, void *cb_1);

sceSysconSetLowBatteryInhibitUpdateDownloadCallbackForDriver

Version	NID
0.931.010-3.18	not present
3.300.041-3.740.011	0x7AA00C01

This is a guessed name.

Registers the low-battery-inhibit-update-download callback.

index 0x1D on FW 3.600.011.

No use case seen.

int sceSysconSetLowBatteryInhibitUpdateDownloadCallbackForDriver(void *cb_0, void *cb_1);

sceSysconSetStandbyButtonCallbackForDriver

Version	NID
0.990.000-3.740.011	0x423D0C58

Registers a callback.

index 0x20 on FW 3.600.011.

No use case seen.

int sceSysconSetStandbyButtonCallbackForDriver(void *cb_0, void *cb_1);

SceSysconForDriver_154676F1

Version	NID
0.990.000-3.740.011	0x154676F1

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x21 on FW 3.600.011.

No use case seen.

int SceSysconForDriver_154676F1(void *cb_0, void *cb_1);

SceSysconForDriver_63352A39

Version	NID
0.990.000-3.740.011	0x63352A39

A guessed name is sceSysconSetMicrophoneCallbackForDriver.

Registers a callback.

index 0x22 on FW 3.600.011.

Used in SceHpremote.

int SceSysconForDriver_63352A39(void *cb_0, void *cb_1);

SceSysconForDriver_14730196

Version	NID
0.990.000-3.740.011	0x14730196

A guessed name is sceSysconSet...CallbackForDriver.

Registers a callback.

index 0x23 on FW 3.600.011.

No use case seen.

int SceSysconForDriver_14730196(void *cb_0, void *cb_1);

sceSysconSetAlarmCallbackForDriver

Version	NID
0.931.010-3.740.011	0x32418370

Registers the alarm callback.

index 0 on FWs 0.931.010-0.940. index 0x24 on FW 3.600.011.

int sceSysconSetAlarmCallbackForDriver(void *cb_0, void *cb_1);

sceSysconSetMultiCnOtgCallbackForDriver

Version	NID
0.931.010-0.940	not present
0.996.090-3.740.011	0xA26586B2

This is a guessed name.

Registers 2 callbacks (maybe constructor and destructor or callback and args) for multi-connector OTG on PS Vita Fat.

index 0x25 on FW 3.600.011.

Used in SceUsbServ.

int sceSysconSetMultiCnOtgCallbackForDriver(void *cb_0, void *cb_1);

sceSysconSetMiniUsbOtgCallbackForDriver

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0x67A4CB9F

This is a guessed name.

Registers 2 callbacks (maybe constructor and destructor or callback and args) for mini-USB OTG on PS Vita Slim.

index 0x26 on FW 3.600.011.

Used in SceUsbServ.

int sceSysconSetMiniUsbOtgCallbackForDriver(void *cb_0, void *cb_1);

sceSysconUpdaterSetSegmentForDriver

Version	NID
0.931.010-3.740.011	0x9B00BC7F

Used in SceSblUpdateMgr.

// segment_no: a 8bit value
int sceSysconUpdaterSetSegmentForDriver(SceUInt32 segment_no);

sceSysconUpdaterSendProgramDataForDriver

Version	NID
0.931.010-3.740.011	0x356B9696

This is a guessed name. Temp name was sceSysconUpdaterLoadSegmentForDriver.

Buffer overflow if (size > 0x80 - 6).

Used in SceSblUpdateMgr.

// pSegment: the encrypted Syscon firmware segment to send
// offset
// size: should be between 0 and 0x80 but usual chunks are 0x10 or 0x40, last chunk being less (no padding)
int sceSysconUpdaterSendProgramDataForDriver(void *pSegment, SceUInt32 offset, SceSize size);

sceSysconUpdaterSendProgramData2ForDriver

Version	NID
0.931.010-3.740.011	0x734544E4

This is a guessed name. Temp name was sceSysconUpdaterLoadSegment2ForDriver.

Same functionality as #sceSysconUpdaterLoadSegmentForDriver except that the segment is copied to an intermediate 0x7A-byte zeroed buffer. This implementation seems bad as the Syscon packet first 6 bytes are written twice.

Buffer overflow if (size > 0x80 - 6).

Used in SceSblUpdateMgr.

// pSegment: the encrypted Syscon firmware segment to send
// offset
// size: should be between 0 and 0x80 but usual chunks are 0x10 or 0x40, last chunk being less (no padding)
int sceSysconUpdaterSendProgramData2ForDriver(void *pSegment, SceUInt32 offset, SceSize size);

sceSysconUpdaterCalcChecksumForDriver

Version	NID
0.931.010-3.740.011	0xD27C3D80

Computes checksum to use with #sceSysconUpdaterExecProgrammingForDriver. It does not call any Syscon command.

Used in SceSblUpdateMgr.

int sceSysconUpdaterCalcChecksumForDriver(void *data, SceSize size, int *puiChecksum);

sceSysconUpdaterExecProgrammingForDriver

Version	NID
0.931.010-3.740.011	0x69AD76E4

Executes programming, i.e writes segments to Syscon Flash memory.

Used in SceSblUpdateMgr.

// checksum: value got from sceSysconUpdaterCalcChecksumForDriver
int sceSysconUpdaterExecProgrammingForDriver(int checksum);

sceSysconUpdaterSetRunModeForDriver

Version	NID
0.931.010-3.740.011	0xB487C2FB

Used in SceSblUpdateMgr.

int sceSysconUpdaterSetRunModeForDriver(int mode);

sceSysconUpdaterExecFinalizeForDriver

Version	NID
0.931.010-3.740.011	0xC7747A63

Finalize Syscon update by sending checksum from ARM to Syscon.

Calls Syscon command 0x1184.

Used in SceSblUpdateMgr.

// digest: sha1 of decrypted concatenated segments, comes from Syscon Update package packet type 0x20
// size: usually 0x14 (sha1 size)
int sceSysconUpdaterExecFinalizeForDriver(void *digest, SceSize size);

sceSysconUpdaterCheckSignatureForDriver

Version	NID
0.931.010-0.940	not present
0.996.090-3.740.011	0xCBA836FF

Sends a 0x18-byte buffer to Syscon command 0x1185. This Syscon command 0x1185 seems to be unimplemented in recent Syscon firmwares: it does not do anything. It can be explained by the fact that the signature packet is not embedded in Syscon Update SPKGs.

Used in SceSblUpdateMgr.

// size: must be 0x18
int sceSysconUpdaterCheckSignatureForDriver(void *pSig, SceSize size);

SceSysconForDriver_4D03754A

Version	NID
0.931.010-0.990	not present
0.996.090-3.740.011	0x4D03754A

Temp name was syscon_update_command_0xD00002.

Calls Syscon command 0xD0.

Used in SceSblUpdateMgr with update_service_sm function 0xD0002.

// in_buf: buffer that embeds input data, usually 0xD0002 command request + 8
// in_size: usually 0x28
// out_buf: buffer to receive result, usually 0xD0002 command request + 0x30
// out_size: usually 0x28
int SceSysconForDriver_4D03754A(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);

SceSysconForDriver_C14BD637

Version	NID
0.931.010-0.990	not present
1.000.041-3.740.011	0xC14BD637

Calls Syscon command 0xD1.

Seems unused.

int SceSysconForDriver_C14BD637(void);

sceSysconSnvsReadDataForDriver

Version	NID
0.931.010-0.990	not present
0.996.090-3.740.011	0xEBDF88B9

This is a guessed name.

Calls Syscon command 0xD2.

Used in SceSblPostSsMgr to read data from SNVS with pm_sm command 8. Also used in SceSblUpdateMgr with update_service_sm commands 0xB0002 and 0xC0002.

// in_size: 0x10
// out_size: 0x30
int sceSysconSnvsReadDataForDriver(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);

sceSysconSnvsWriteDataForDriver

Version	NID
0.931.010-0.990	not present
0.996.090-3.740.011	0x63683B9B

This is a guessed name.

Calls Syscon command 0xD3.

Used in SceSblPostSsMgr to write data to SNVS with pm_sm command 8. Also used in SceSblUpdateMgr with update_service_sm functions 0xB0002 and 0xC0002.

// in_size: 0x30
// out_size: 0x10
int sceSysconSnvsWriteDataForDriver(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);

sceSysconSetAffirmativeRertyModeForDriver

Version	NID
0.931.010-3.740.011	0x901D6CD4

This is an official name. Typo is the name is intentional.

Sets AffirmativeRertyMode flag in kernel memory. During SceSyscon initialization, AffirmativeRertyMode is enabled by default.

AffirmativeRertyMode flag is used by SceSyscon kernel module when executing Syscon commands.

Used in SceCtrl, ScePower.

int sceSysconSetAffirmativeRertyModeForDriver(int enable);

sceSysconGetControlsInfoForDriver

Version	NID
0.931.010-3.740.011	0x145F59A4

This is a guessed name.

See Boot Controls Info.

Calls Syscon command 0x100.

int sceSysconGetControlsInfoForDriver(SceUInt32 *pCtrl);

SceSysconForDriver_76272CB9

Version	NID
0.931.010-1.692.000	not present
1.800.071-3.740.011	0x76272CB9

Calls Syscon command 0x120. Gets a 4-byte value.

int SceSysconForDriver_76272CB9(SceUInt32 *pRes);

sceSysconGetClockForDriver

Version	NID
0.931.010-3.740.011	0xD7BEFF8B

Gets Syscon power-on time in ticks of 0.5 second. Each second the counter automatically increases by 2.

Calls Syscon command 0x11.

Used in SceRtc to calculate the current time and date.

int sceSysconGetClockForDriver(SceUInt32 *puiTime);

SceSysconForDriver_3168F3AF

Version	NID
0.931.010-3.740.011	0x3168F3AF

Calls Syscon command 0x12.

Gets the tick of an alarm timer. The alarm tick must be set using Syscon command 0x82 via #SceSysconForDriver_51164951.

// FW 0.931.010
int SceSysconForDriver_3168F3AF(SceUInt32 *pTick);

// FW 3.600.011-3.740.011
int SceSysconForDriver_3168F3AF(SceUInt32 *pTickLow, SceUInt8 *pTickHi);

SceSysconForDriver_BA09F171

Version	NID
0.931.010-0.940	not present
0.990.000-3.740.011	0xBA09F171

Calls Syscon command 0x13.

It might be related to alarm/timer. Sends 0 byte to Syscon. Gets 2 bytes from Syscon.

int SceSysconForDriver_BA09F171(SceUInt8 *pResult, SceUInt8 *pResult2);

SceSysconForDriver_93075DD1

Version	NID
0.931.010-3.740.011	0x93075DD1

Calls Syscon command 0x14. Sends 0 byte to Syscon. Gets ?1-4? bytes from Syscon.

int SceSysconForDriver_93075DD1(SceUInt32 *pResult);

sceSysconGetPowerStatusForDriver

Version	NID
0.931.010-3.740.011	0x175CE5A1

Calls Syscon command 0x883. Gets 8 bytes from Syscon. Reads Elmo registers 0xA0 through 0xA3.

// pStatus: pointer to a buffer of at least 8 bytes
int sceSysconGetPowerStatusForDriver(void *pStatus);

sceSysconCtrlDeviceResetForDriver

Version	NID
0.931.010-3.740.011	0x40FF3898

Sends 2 bytes to Syscon command 0x88F.

// The following defines are guessed names
#define SCE_SYSCON_CTRL_DEVICE_RESET_UNK_1 1
#define SCE_SYSCON_CTRL_DEVICE_RESET_MOTION 2
#define SCE_SYSCON_CTRL_DEVICE_RESET_TP_FRONT 4
#define SCE_SYSCON_CTRL_DEVICE_RESET_TP_REAR 8
#define SCE_SYSCON_CTRL_DEVICE_RESET_WLANBT 0x10
#define SCE_SYSCON_CTRL_DEVICE_RESET_SMSC_ETH 0x20

// mode: 0 or 1, probably for the reset type such as reset or shutdown
int sceSysconCtrlDeviceResetForDriver(SceUInt8 device, SceBool mode);

SceSysconForDriver_285594F8

Version	NID
0.931.010-3.740.011	0x285594F8

Calls Syscon command 0x890.

int SceSysconForDriver_285594F8(SceUInt16 value);

sceSysconCtrlLEDForDriver

Version	NID
0.931.010-3.740.011	0x04EC7579

#define STATE_ON 1
#define STATE_OFF 0

#define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue)

int sceSysconCtrlLEDForDriver(SceUInt16 device, SceBool state);

sceSysconCtrlChargeACForDriver

Version	NID
0.931.010-3.740.011	0x596B17B7

Sends 2 bytes to Syscon command 0x892. Related to Battery. Maybe enables/disables battery charging.

Used in ScePower's module_start.

int sceSysconCtrlChargeACForDriver(SceBool enable);

sceSysconCtrlChargeVBUSForDriver

Version	NID
0.931.010-3.740.011	0x2A4B0437

Sends 3 bytes to Syscon command 0x893. Related to Battery. Maybe enables/disables battery charging.

Used in ScePower's module_start.

// a1: ex: 0, 1
// a2: ex: 0, 1

// FW 0.931.010
int sceSysconCtrlChargeVBUSForDriver(SceUInt32 a1);

// FW 3.600.011-3.740.011
int sceSysconCtrlChargeVBUSForDriver(SceUInt32 a1, SceUInt32 a2);

SceSysconForDriver_5CDDA14D

Version	NID
0.931.010-3.740.011	0x5CDDA14D

A guessed name is sceSysconCtrlHpremoteForDriver.

If Syscon version < 0x80001, it does nothing and returns 0, else it sends 2 bytes to Syscon command 0x899.

Maybe enables/disables Jack power.

Used in SceHpremote.

int SceSysconForDriver_5CDDA14D(SceBool enable);

SceSysconForDriver_A2FE9BF9

Version	NID
0.931.010-3.740.011	0xA2FE9BF9

Calls Syscon command 0x800.

Gets information related to battery charge status, or USB power connection. See also Ernie#CMD_0x0800_-_SceSysconForDriver_A2FE9BF9.

Used in ScePower's module_start.

int SceSysconForDriver_A2FE9BF9(void *pResult);

sceSysconCtrlLedBlinkType2ForDriver

Version	NID
0.931.010-3.740.011	0xCB41B531

This is a guessed name.

Calls Syscon command 0x89F.

sceSysconGetBatteryTempForDriver

Version	NID
0.931.010-3.740.011	0x9070F139

If Syscon version <= 0x70503, it calls Syscon command 0x8A0, else Syscon command 0x981.

Used in ScePower's module_start.

int sceSysconGetBatteryTempForDriver(int *pResult);

sceSysconGetBatteryRemainCapForDriver

Version	NID
0.931.010-3.740.011	0xC562AF3A

Temp name was sceSysconGetBatteryRemainCapacityForDriver.

If Syscon version <= 0x70503, it calls Syscon command 0x802, else Syscon command 0x900.

Only used in ScePower.

int sceSysconGetBatteryRemainCapForDriver(SceUInt32 *pResult);

sceSysconGetBatteryVoltForDriver

Version	NID
0.931.010-3.740.011	0x03F11220

If Syscon version <= 0x70503, it calls Syscon command 0x803, else Syscon command 0x901.

Used in ScePower.

int sceSysconGetBatteryVoltForDriver(SceUInt32 *pResult);

sceSysconGetBatteryLifePercentForDriver

Version	NID
0.931.010-1.06	not present
1.500.151-3.740.011	0xAD0A8275

Used in ScePower.

int sceSysconGetBatteryLifePercentForDriver(SceUInt32 *pResult);

sceSysconGetBatteryFullCapForDriver

Version	NID
0.931.010-3.740.011	0x00A65FC1

If Syscon version <= 0x70503, it calls Syscon command 0x8A1, else Syscon command 0x982.

Used in ScePower.

int sceSysconGetBatteryFullCapForDriver(int *pResult);

sceSysconGetBatteryElecForDriver

Version	NID
0.931.010-3.740.011	0x0826BA07

If Syscon version <= 0x70503, it calls Syscon command 0x8A2, else Syscon command 0x983.

Used in ScePower.

int sceSysconGetBatteryElecForDriver(SceUInt16 *pResult);

sceSysconGetBatteryTTEForDriver

Version	NID
0.931.010-3.740.011	0xB841C141

Temp name was sceSysconGetBatteryLifeTimeForDriver.

If Syscon version <= 0x70503, it calls Syscon command 0x8A3, else Syscon command 0x984.

Used in ScePower.

int sceSysconGetBatteryTTEForDriver(SceUInt16 *pTTE);

sceSysconGetBatterySOHForDriver

Version	NID
0.931.010-3.740.011	0x91D3B7A3

If Syscon version <= 0x70503, it calls Syscon command 0x8A4, else Syscon command 0x985.

Used in ScePower.

int sceSysconGetBatterySOHForDriver(void *pSOH);

sceSysconReadBatteryRegForDriver

Version	NID
0.931.010-3.740.011	0xC2FB5565

If Syscon version <= 0x70503, it calls Syscon command 0x8A8, else Syscon command 0x986.

int sceSysconReadBatteryRegForDriver(SceUInt16 offset, SceUInt16 *pRes);

sceSysconWriteBatteryRegForDriver

Version	NID
0.931.010-3.740.011	0x9B779DB0

If Syscon version <= 0x70503, it calls Syscon command 0x8A9, else Syscon command 0x987.

int sceSysconWriteBatteryRegForDriver(SceUInt16 offset, SceUInt16 value);

SceSysconForDriver_A5AB19B1

Version	NID
0.931.010-3.740.011	0xA5AB19B1

Guessed name is sceSysconBatteryControlCommandForDriver

Writes 2 byte command to Abby control register and returns 2 byte result. Use carefully as there are commands to seal dataflash!

If Syscon version <= 0x70503, it calls Syscon command 0x8AA, else Syscon command 0x988.

Command must be between 0 and 0xFFFF else returns error 0x80250001.

int SceSysconForDriver_A5AB19B1(SceUInt16 command, SceUInt16 *pResult);

SceSysconForDriver_CFCEE733

Version	NID
0.931.010-3.740.011	0xCFCEE733

Sends 2 bytes from Syscon command 0x181.

int SceSysconForDriver_CFCEE733(SceUInt32 unk);

SceSysconForDriver_FDB3AE9D

Version	NID
0.931.010-3.740.011	0xFDB3AE9D

Gets 0x10 bytes from Syscon command 0x183.

int SceSysconForDriver_FDB3AE9D(int *pResult);

SceSysconForDriver_C3504ADE

Version	NID
0.931.010-3.740.011	0xC3504ADE

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_DE613081.

Used in SceHpremote.

SceBool SceSysconForDriver_C3504ADE(void);

SceSysconForDriver_B832B72C

Version	NID
0.931.010-3.740.011	0xB832B72C

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_229A07C2.

SceBool SceSysconForDriver_B832B72C(void);

SceSysconForDriver_86BAAF7D

Version	NID
0.931.010-3.740.011	0x86BAAF7D

A guessed name is sceSysconIsAlarmTimerExistForDriver.

Returns the global variable related to #SceSysconForDriver_8351526D.

Used in SceRtc.

SceBool SceSysconForDriver_86BAAF7D(void);

SceSysconForDriver_A57B5433

Version	NID
0.931.010-3.740.011	0xA57B5433

A guessed name is sceSysconIsResumeRequestedForDriver.

SceBool SceSysconForDriver_A57B5433(void);

SceSysconForDriver_ACC7F71E

Version	NID
0.931.010-3.740.011	0xACC7F71E

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_35E1689F.

Used in SceHpremote.

SceBool SceSysconForDriver_ACC7F71E(void);

SceSysconForDriver_769F9AC4

Version	NID
0.931.010-3.740.011	0x769F9AC4

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_474A9EA7.

Returns always SCE_TRUE on PS TV. This function could be related to USB or ethernet availability.

No use case seen.

SceBool SceSysconForDriver_769F9AC4(void);

SceSysconForDriver_4BC63A40

Version	NID
0.931.010-3.740.011	0x4BC63A40

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_4E88B4D9.

Used in SceSblPostSsMgr.

SceBool SceSysconForDriver_4BC63A40(void);

SceSysconForDriver_99A254A9

Version	NID
0.931.010-3.740.011	0x99A254A9

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_376CCCB8.

No use case seen.

SceBool SceSysconForDriver_99A254A9(void);

SceSysconForDriver_9A4F4B7C

Version	NID
0.931.010-0.940	not present
0.996.090-3.740.011	0x9A4F4B7C

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_3BAAC8A9.

No use case seen.

SceBool SceSysconForDriver_9A4F4B7C(void);

SceSysconForDriver_92D2C6A4

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0x92D2C6A4

int SceSysconForDriver_92D2C6A4(void);

SceSysconForDriver_B9EA2FA8

Version	NID
0.931.010-0.940	not present
0.995.000-3.740.011	0xB9EA2FA8

A guessed name is sceSysconIsAccExistForDriver.

Only used in SceUsbServ.

SceBool SceSysconForDriver_B9EA2FA8(void);

SceSysconForDriver_29CF4335

Version	NID
0.931.010-3.740.011	0x29CF4335

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_2E4BA4B8.

It is related to Ernie DL Mode.

Used in SceSblPostSsMgr.

SceBool SceSysconForDriver_29CF4335(void);

SceSysconForDriver_32B2DB3D

Version	NID
0.931.010-3.740.011	0x32B2DB3D

int SceSysconForDriver_32B2DB3D(void);

sceSysconIsHeadphoneExistForDriver

Version	NID
0.931.010-3.740.011	0x142D5E82

Used in SceHpremote#sceHprmIsHeadphoneExistForDriver.

SceBool sceSysconIsHeadphoneExistForDriver(void);

sceSysconIsMotionDevExistForDriver

Version	NID
0.931.010-3.740.011	0x490C5548

This is a guessed name.

Used in SceMotionDev.

SceBool sceSysconIsMotionDevExistForDriver(void);

SceSysconForDriver_012B57B3

Version	NID
0.931.010	not present
0.940-3.740.011	0x012B57B3

int SceSysconForDriver_012B57B3(void);

SceSysconForDriver_27758A64

Version	NID
0.931.010-0.940	not present
1.000.071-3.740.011	0x27758A64

A guessed name is sceSysconIsBatteryOnlineForDriver, deriving from #sceSysconIsPowerOnlineForDriver.

Used in ScePower#scePowerGetBatteryRemainLevelForDriver, ScePower#scePowerIsLowBatteryForDriver, ScePower's module_start.

Returns the global variable related to #SceSysconForDriver_80D6E061.

SceBool SceSysconForDriver_27758A64(void);

SceSysconForDriver_4A184B7C

Version	NID
0.931.010-0.940	not present
1.000.071-3.740.011	0x4A184B7C

A guessed name is sceSysconIs...ForDriver.

Returns some information about battery.

Used in ScePower#ScePowerForDriver_627A89C6.

Returns the global variable related to #SceSysconForDriver_7682FE69.

SceBool SceSysconForDriver_4A184B7C(void);

SceSysconForDriver_ACEE1C70

Version	NID
0.931.010-0.940	not present
0.996.090-3.740.011	0xACEE1C70

A guessed name is sceSysconIs...ForDriver.

Returns information about battery. Only used when battery is working.

Used in ScePower#ScePowerForDriver_0D56C601.

Returns the global variable related to #SceSysconForDriver_E0D52DF0.

SceBool SceSysconForDriver_ACEE1C70(void);

SceSysconForDriver_03C50DC3

Version	NID
0.931.010-0.940	not present
1.000.071-3.740.011	0x03C50DC3

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_2D471528.

SceBool SceSysconForDriver_03C50DC3(void);

SceSysconForDriver_BFDA5590

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0xBFDA5590

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_129EA022.

SceBool SceSysconForDriver_BFDA5590(void);

SceSysconForDriver_63B14156

Version	NID
0.931.010-0.996.090	not present
1.000.071-3.740.011	0x63B14156

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_85E5DEBF.

SceBool SceSysconForDriver_63B14156(void);

SceSysconForDriver_50CAE242

Version	NID
0.931.010-0.940	not present
1.000.071-3.740.011	0x50CAE242

A guessed name is sceSysconIsThermalAlertForDriver.

Returns the global variable related to #sceSysconSetThermalAlertCallbackForDriver.

Used in ScePower.

SceBool SceSysconForDriver_50CAE242(void);

SceSysconForDriver_9F4042F8

Version	NID
0.931.010-1.692.000	not present
1.800.071-3.740.011	0x9F4042F8

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_C442D0BE.

No use case seen.

SceBool SceSysconForDriver_9F4042F8(void);

SceSysconForDriver_C50568E9

Version	NID
0.931.010-3.01	not present
3.100.081-3.740.011	0xC50568E9

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_61AE3970.

This function was added to support DOL-1002 motherboard.

No use case seen.

SceBool SceSysconForDriver_C50568E9(void);

sceSysconIsLowBatteryForDriver

Version	NID
0.931.010-3.740.011	0xD7F5A797

This is a guessed name.

Only used in ScePower.

SceBool sceSysconIsLowBatteryForDriver(void);

sceSysconIsLowBatteryInhibitUpdateRebootForDriver

Version	NID
0.931.010-3.18	not present
3.300.041-3.740.011	0x1A0C140F

This function was added along with ScePower#scePowerIsLowBatteryInhibitUpdateReboot.

Used in ScePower#scePowerIsLowBatteryInhibitUpdateReboot.

SceBool sceSysconIsLowBatteryInhibitUpdateRebootForDriver(void);

sceSysconIsLowBatteryInhibitUpdateDownloadForDriver

Version	NID
0.931.010-3.18	not present
3.300.041-3.740.011	0x1E3130EE

This function was added along with ScePower#scePowerIsLowBatteryInhibitUpdateDownload.

Used in ScePower#scePowerIsLowBatteryInhibitUpdateDownload.

SceBool sceSysconIsLowBatteryInhibitUpdateDownloadForDriver(void);

sceSysconGetBatteryRemainLevelForDriver

Version	NID
0.931.010-3.18	not present
3.300.041-3.740.011	0x26F9D729

Only used if Syscon version >= 0x1040105.

This function was added along with ScePower#scePowerGetBatteryRemainLevelForDriver.

Used in ScePower#scePowerGetBatteryRemainLevelForDriver.

int sceSysconGetBatteryRemainLevelForDriver(SceUInt8 *pResult1, SceUInt8 *pResult2);

SceSysconForDriver_C0F215B7

Version	NID
0.931.010-0.990.000	not present
0.996.090-3.740.011	0xC0F215B7

A guessed name is sceSysconIs...ForDriver.

Returns the global variable related to #SceSysconForDriver_18A6F4D9.

The global variable is updated by #sceSysconCmdSyncForDriver.

It looks like it checks for WlanBt presence (used in SceWlanBt, skipping sdio/etc initialization if SceSysconForDriver_C0F215B7 returns 0).

SceBool SceSysconForDriver_C0F215B7(void);

SceSysconForDriver_D6F6D472

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0xD6F6D472

Guessed name is sceSysconGetMicroUsbInfoForDriver.

Gets electric information (maybe intensity) of the device connected to USB OTG on PS Vita Slim.

Returns a global variable updated by #sceSysconCmdSyncForDriver, obtained using Syscon command 0x130.

int SceSysconForDriver_D6F6D472(int *pInfo);

SceSysconForDriver_F99BC858

Version	NID
0.931.010-3.01	not present
3.100.081-3.740.011	0xF99BC858

Detects microSD swap.

Calls syscon command 0x131.

This function was maybe added to support a prototype motherboard that has a microSD port.

int SceSysconForDriver_F99BC858(SceBool *isSwapped);

SceSysconForDriver_E7893732

Version	NID
0.931.010-2.060.011	not present
2.100.081-3.740.011	0xE7893732

Guessed name is sceSysconSetMicroUsbPortForDriver.

Calls Syscon command 0x1B0. Related to UART or Jig on PS Vita Slim or PS TV.

// value holds 3 useful bytes and 1 byte not sent to syscon
int SceSysconForDriver_E7893732(int value);

sceSysconGetElmoVersionForDriver

Version	NID
0.931.010-3.740.011	0xA039B563

Temp name was sceSysconGetElmoFwVersionForDriver.

Calls Syscon command 0x880. Read Elmo registers 0xD0 through 0xEF.

On PS Vita 1000 series with IRS-001 motherboard, Elmo Fw Version is 0x192.

int sceSysconGetElmoVersionForDriver(SceUInt32 *pVersion);

sceSysconGetCookieVersionForDriver

Version	NID
0.931.010-3.740.011	0x9BF78047

Temp name was sceSysconGetCookieFwVersionForDriver.

Calls Syscon command 0x881.

int sceSysconGetCookieVersionForDriver(SceUInt32 *pVersion);

sceSysconReadElmoRegForDriver

Version	NID
0.931.010-3.740.011	0x5BF765BB

Calls Syscon command 0x895.

sceSysconWriteElmoRegForDriver

Version	NID
0.931.010-3.740.011	0xCCC71C28

Calls Syscon command 0x896.

sceSysconReadCookieRegForDriver

Version	NID
0.931.010-3.740.011	0x95975DD1

Calls Syscon command 0x897.

sceSysconWriteCookieRegForDriver

Version	NID
0.931.010-3.740.011	0xF39300D3

Calls Syscon command 0x898.

Returns error 0x80250001 if offset is greater than 0xFF.

// offset: 0-0xFF
int sceSysconWriteCookieRegForDriver(SceUInt32 offset, SceUInt16 data);

Commands

It seems like the command format is as follows: (direction << 8) | cmd_id, where direction = 1 means write to syscon, and direction = 0 means read from syscon.

Command	Return size (without considering the 2 bytes rx.size and rx.error_code)	Functions NIDs	Description
0x0	0x0	0x0D0B6D25	sceSysconNopForDriver
0x1	0x4	module_start	sceSysconGetErnieVersionForDriver. Used during SysconInit.
0x2	0xC	module_start	sceSysconGetTimeStampForDriver. Returns 12-byte string followed by at least 2-byte memory leak. Used during SysconInit.
0x3	0x4	module_start	sceSysconGetSleepFactor. Used during SysconInit.
0x4	0x4		Unknown. Run during boot. See Ernie#CMD_0x0004.
0x5	0x4	0xCBD6D8BC, module_start	sceSysconGetHardwareInfoForDriver
0x6	0x10	0x965C68C3, module_start	sceSysconGetHardwareInfo2ForDriver. Get Hardware Info 2. See KBL_Param#Hardware_Info_2.
0x10	0x2	0xCF5B2F2F	sceSysconGetWakeupFactorForDriver
0x11	0x4	0xD7BEFF8B	sceSysconGetClockForDriver
0x12	0x5 or 0x6	0x3168F3AF	SceSysconForDriver_3168F3AF. Gets information about alarm timer. Return value is 1 byte indicating data size then 4 or 5 bytes of data.
0x13	0x2	0xBA09F171	SceSysconForDriver_BA09F171
0x14	?between 0x1 and 0x4?	0x93075DD1	SceSysconForDriver_93075DD1
0x15	0x4	0x3E09A1F4	sceSysconGetManufacturesStatusForDriver
0x80	0x0	module_start	?? Used during SysconInit. Sends 2 bytes (ex: 0x0012) to Syscon.
0x81	?	0x9B6A6F64	sceSysconSetClockForDriver. Sends 5 bytes to Syscon: 1 byte for size=5 and 4 bytes of data.
0x82	?	0x51164951	SceSysconForDriver_51164951
0x83	?	0x373ECF8A	SceSysconForDriver_373ECF8A. Sends 3 bytes to Syscon.
0x84	?	0x2659535C	SceSysconForDriver_2659535C. Sends 1 byte to Syscon.
0x85	?	0x4295D497	SceSysconForDriver_4295D497
0x86	8	0x701535FC	sceSysconGetLogInfoForDriver
0x87	0	0x4E55CF5E	sceSysconLogStartForDriver. Sends 1 byte to Syscon: 0.
0x88	0x18	0x487D97F3	sceSysconLogReadDataForDriver. Sends 2 bytes to Syscon: offset.
0x89	0	0x9C0B1E61	sceSysconLogStartWaitingForDriver. Sends 1 byte to Syscon: 0.
0x90	?0x3B?	0x299B1CE7	sceSysconReadScratchPadForDriver
0x91	?0x3B?	0xE26488B9	sceSysconWriteScratchPadForDriver
0xA0	?0x10 or 0x28?	second_loader	Handshake during boot. See Ernie_Secure#Ernie_Secure_Commands.
0xB0	0	0x058941D7	sceSysconOutputClockForDriver. Sends 2 bytes to Syscon.
0xB1	0	0xDF8C6D2D	sceSysconCtrlWirelessPowerDownForDriver
0xB2	0	0xDECCB2B4	sceSysconCtrlHostOutputViaDongleForDriver. Sends 2 bytes to Syscon.
0xB3	at least 1	0x33B5CDB3	SceSysconForDriver_33B5CDB3
0xB4	at least 1	0xF6D4DDC4	SceSysconForDriver_F6D4DDC4
0xB5	0	0x00AE3AEB	SceSysconForDriver_00AE3AEB. Probably a control command. Sends 2 bytes to Syscon.
0xB6	0	0x0D300158	SceSysconForDriver_0D300158. Probably a control command. Sends 2 bytes to Syscon.
0xB7	at least 1	0x91EF4EC3	SceSysconForDriver_91EF4EC3
0xC0	?0x3E?
0xC1	0	0x94AB13CC	sceSysconErnieShutdownForDriver. Sends 2 bytes to Syscon.
0xD0	?0x2A or 0x28?	0x4D03754A	SceSysconForDriver_4D03754A. Handshake before SNVS RW. See Ernie_Secure#Ernie_Secure_Commands.
0xD1	?0x0 or 0x2?	0xC14BD637	SceSysconForDriver_C14BD637
0xD2	?0x30?	0xEBDF88B9, second_loader	sceSysconSnvsReadDataForDriver. See Ernie_Secure#Ernie_Secure_Commands.
0xD3	?0x12?	0x63683B9B	sceSysconSnvsWriteDataForDriver. See Ernie_Secure#Ernie_Secure_Commands.
0x100	0x4	0x145F59A4	sceSysconGetControlsInfoForDriver. Used in SceCtrlVblankHandler in SceCtrl.
0x101	0x8		sceSysconGetControlsInfo2ForDriver. Used in SceCtrlVblankHandler in SceCtrl. Uses Ernie version and Ernie DL version.
0x102	0xC
0x103	0x4	0x1503D6A0	sceSysconGetMultiCnInfoForDriver
0x104	0xC		sceSysconGetControlsInfo3ForDriver. Used in SceCtrlVblankHandler in SceCtrl.
0x105	?		Uses string "PS" then "TUV".
0x106	?
0x107	?
0x108	?
0x109	?
0x110	?
0x120	?	0x76272CB9	SceSysconForDriver_76272CB9
0x121	?
0x130	0x4	module_start (SysconInit), 0xD6F6D472	SceSysconForDriver_D6F6D472
0x131	?0x1? (read)	0xF99BC858	SceSysconForDriver_F99BC858. Added on a FW > 3.01 and <= 3.100.081.
0x140	?
0x141	?
0x142	?
0x143	?
0x144	?
0x145	?
0x146	?
0x147	?
0x148	?
0x150	?
0x151	?
0x152	?
0x153	?
0x154	?
0x155	?
0x156	?
0x157	?
0x160	?
0x161	?
0x162	?
0x163	?
0x168	?
0x170	?
0x171	?
0x172	?
0x180	?		Set analog sampling. Sends 2 bytes to Syscon: 0 to disable, 1 to enable on Syscon version is < 0x90202, 3 to enable on Syscon version is >= 0x90202. Used in SceCtrlVblankHandler in SceCtrl.
0x181	0	0xCFCEE733	SceSysconForDriver_CFCEE733. Sends 2 bytes to Syscon.
0x182	?
0x183	0x10	0xFDB3AE9D	SceSysconForDriver_FDB3AE9D. Gets some information.
0x184	?
0x185	?
0x186	?
0x187	?
0x188	?
0x189	?
0x18A	?
0x18B	?
0x18C	?
0x18D	?
0x18E	?
0x18F	?
0x190	0	0x8AAB6308	sceSysconSetMultiCnPortForDriver. Sends 3 bytes to Syscon.
0x191	?
0x192	?
0x1A0	?
0x1A1	?
0x1B0	0	0xE7893732	SceSysconForDriver_E7893732. Sends 3 bytes to Syscon.
0x1B2	?
0x1C0	?
0x1C1	?
0x1C2	?
0x1C3	?
0x1C4	?
0x1D0	?
0x1D1	?
0x1D2	?
0x1D3	?
0x1D4	?
0x1D5	?
0x1E0	?
0x1E1	?
0x1E2	?
0x1E3	?
0x300	?
0x301	?
0x303	?
0x380	at least 1	0xF492E69E	sceSysconGetTouchpanelDeviceInfoForDriver
0x38A	at least 1	0xA1F1B973	??
0x390	at least 1	0x030D447F	sceSysconGetTouchpanelDeviceInfo2ForDriver
0x392	?	0x48ED8981, 0x060E55C1	SceSysconForDriver_48ED8981 / SceSysconForDriver_060E55C1. Sends 2 bytes to Syscon: 0 or 1.
0x393	?	0x9A28BEEF, 0x8874EF45	SceSysconForDriver_9A28BEEF / SceSysconForDriver_8874EF45. Sends 2 bytes to Syscon: 0 or 1. Used in SceSblUpdateMgr.
0x3A0	?	??	sceSysconTouchStartBlModeForDriver
0x3A1	?	??	sceSysconTouchUnlockDeviceForDriver
0x3A2	?	??	sceSysconTouchSetProgramDataForDriver
0x3A3	?	??	sceSysconTouchExecProgramDataForDriver
0x3A4	?	??	sceSysconTouchGetBLStatusForDriver
0x3A9	0	0x010F95D9	SceSysconForDriver_010F95D9. Sends 1 byte to Syscon.
0x3AB	?	0x357CC9D9	SceSysconForDriver_010F95D9. Sends 3 bytes to Syscon.
0x3AC	?between 0x1 and 0x4?	0x3664E2C0	SceSysconForDriver_3664E2C0. Gets information.
0x3AF	?	0xB8F4F4E3	SceSysconForDriver_B8F4F4E3. Sends 2 bytes to Syscon.
0x3B0	?	??	sceSysconTouchStartBlModeForDriver
0x3B1	?	??	sceSysconTouchUnlockDeviceForDriver
0x3B2	?	??	sceSysconTouchSetProgramDataForDriver
0x3B3	?	??	sceSysconTouchExecProgramDataForDriver
0x3B4	?	??	sceSysconTouchGetBLStatusForDriver
0x3B9	?	0x42E599AC	SceSysconForDriver_42E599AC. Sends 1 byte to Syscon.
0x3BB	?	0xCCA56A16	SceSysconForDriver_CCA56A16. Sends 3 bytes to Syscon.
0x3BC	?between 0x1 and 0x4?	0x2E6D97CD	SceSysconForDriver_2E6D97CD. Gets information.
0x3BF	?	0x240A604E	SceSysconForDriver_240A604E. Sends 2 bytes to Syscon.
0x3C2	?	0x5946B29B, 0x10327C64	SceSysconForDriver_5946B29B / SceSysconForDriver_10327C64. Sends 2 bytes to Syscon: 0 or 1. Used in SceSblUpdateMgr
0x400	?	0x270B7B0B	sceSysconMotionGetMeasureDataForDriver
0x480	4	0xD01E64FC	sceSysconMotionGetDeviceInfoForDriver
0x481	?	0x9A7858B6	SceSysconForDriver_9A7858B6. Sends 3 bytes to Syscon.
0x800	?0x2 or 0x4?	0xA2FE9BF9	SceSysconForDriver_A2FE9BF9. ScePower#ScePowerForDriver_8C0D2051 related.
0x801	0x0		??
0x802	?0x4?	0xC562AF3A	sceSysconGetBatteryRemainCapForDriver. Replaced by Syscon command 0x900 on Syscon version > 0x70503.
0x803	0x4	0x03F11220	sceSysconGetBatteryVoltForDriver. Replaced by Syscon command 0x901 on Syscon version > 0x70503.
0x804	?		??
0x805	4	0xEF810687	sceSysconGetUsbDetStatusForDriver
0x806	?0x1?	0xE7F5D3DC	SceSysconForDriver_E7F5D3DC. Reboots PS Vita?
0x807	0x2	0x253CC522	SceSysconForDriver_253CC522.
0x820	0x0	0x727F985A	sceSysconCtrlDolceLEDForDriver. Set PS TV LED on.
0x821	0x0	0x727F985A	sceSysconCtrlDolceLEDForDriver. Set PS TV LED blink slowly.
0x822	0x0	0x727F985A	sceSysconCtrlDolceLEDForDriver. Set PS TV LED blink fast.
0x840	?0x1?	0x4FEC564C	sceSysconGetManualChargeModeForDriver
0x841	?0x1?	0x3C3B949C	SceSysconForDriver_3C3B949C
0x842	?0x1?	0x1C29C00E	SceSysconForDriver_1C29C00E
0x843	?0x1?	0x730E4725	SceSysconForDriver_730E4725
0x880	0x4	0xA039B563	sceSysconGetElmoVersionForDriver
0x881	?	0x9BF78047	sceSysconGetCookieVersionForDriver
0x882	0x6	0x68E0031E	sceSysconGetBatteryVersionForDriver. Replaced by Syscon command 0x980 on Syscon version > 0x70503.
0x883	0x8	0x175CE5A1	sceSysconGetPowerStatusForDriver
0x884	?	0x3FDD29D6	SceSysconForDriver_3FDD29D6. Same usage as command 0x885. Sends 2 bytes to Syscon.
0x885	?	0x79E6DD8B	SceSysconForDriver_79E6DD8B. Same usage as command 0x884. Sends 2 bytes to Syscon.
0x886	?0x2?	0x62155962	sceSysconCtrlHdmiCecPowerForDriver
0x887	?	0x063425AE	sceSysconCtrlMotionSensorPowerForDriver
0x888	?0x2?	0xBE1ADE4F	sceSysconCtrlSdPowerForDriver
0x889	?0x2?	0x8D1D97E8	sceSysconCtrlAccPowerForDriver
0x88A	?	0x4FBDA504, 0xA2E85DB9	sceSysconCtrlWirelessPowerForDriver, sceSysconCtrlWirelessPower2ForDriver
0x88B	?	0x5A614349	SceSysconForDriver_5A614349. Sends 2 bytes to Syscon.
0x88C	?	0xB872E904	SceSysconForDriver_B872E904. Sends 2 bytes to Syscon.
0x88D	?	0xDD16ABD9	SceSysconForDriver_DD16ABD9. Sends 2 bytes to Syscon.
0x88E	0x0	0x7F198FA2	sceSysconCtrlVoltageForDriver. See Ernie#CMD_0x088E_-_CtrlVoltage.
0x88F	?0x2?	0x40FF3898	sceSysconCtrlDeviceResetForDriver. ?UsbEtherSmsc and WlanBt related?
0x890	?	0x285594F8	SceSysconForDriver_285594F8. Sends 2 bytes to Syscon.
0x891	?0x2?	0x04EC7579	sceSysconCtrlLEDForDriver
0x892	?0?	0x596B17B7	sceSysconCtrlChargeACForDriver. ScePower related.
0x893	?0?	0x2A4B0437	sceSysconCtrlChargeVBUSForDriver. ScePower related.
0x895	?	0x5BF765BB	sceSysconReadElmoRegForDriver
0x896	?	0xCCC71C28	sceSysconWriteElmoRegForDriver
0x897	?	0x95975DD1	sceSysconReadCookieRegForDriver
0x898	?	0xF39300D3	sceSysconWriteCookieRegForDriver
0x899	?0?	0x5CDDA14D	?Guessed name: sceSysconCtrlHpremoteForDriver? SceHpremote related.
0x89A	?0?	0x59DC5938	sceSysconCtrlUsbStatusForDriver
0x89B	?0x2?	0x710A7CF0	sceSysconCtrlRMRPowerForDriver
0x89C	?0x2?	0xB1F88B11	sceSysconCtrlMultiCnPowerForDriver. SceUsbServ related.
0x89D	?	0x6F586D1A	sceSysconCtrlLedPwmBlinkForDriver
0x89E	?	0x9CA6EB70	sceSysconSetChargeLedCtrlForDriver. Sends 2 bytes to Syscon. ScePower related.
0x89F	?	0xCB41B531	sceSysconCtrlLedBlinkType2ForDriver. Sends 6 bytes to Syscon.
0x8A0	?0x4?	0x9070F139	sceSysconGetBatteryTempForDriver. Replaced by Syscon command 0x981 on Syscon version > 0x70503.
0x8A1	?0x3B or 0x4?	0x00A65FC1	sceSysconGetBatteryFullCapForDriver. Replaced by Syscon command 0x982 on Syscon version > 0x70503. ScePower related.
0x8A2	0x2	0x0826BA07	sceSysconGetBatteryElecForDriver. Replaced by Syscon command 0x983 on Syscon version > 0x70503.
0x8A3	?0x4?	0xB841C141	sceSysconGetBatteryTTEForDriver. Replaced by Syscon command 0x984 on Syscon version > 0x70503.
0x8A4	?0x4?	0x91D3B7A3	sceSysconGetBatterySOHForDriver. Replaced by Syscon command 0x985 on Syscon version > 0x70503.
0x8A8	2	0xC2FB5565	sceSysconReadBatteryRegForDriver. Replaced by Syscon command 0x986 on Syscon version > 0x70503.
0x8A9	?	0x9B779DB0	sceSysconWriteBatteryRegForDriver. Replaced by Syscon command 0x987 on Syscon version > 0x70503.
0x8AA	2	0xA5AB19B1	SceSysconForDriver_A5AB19B1. Replaced by Syscon command 0x988 on Syscon version > 0x70503.
0x8B0	?	0x4946538A	sceSysconBatteryStartBLModeForDriver. Replaced by Syscon command 0x9B0 on Syscon version > 0x70503. Since FW 0.940, it is also used by sceSysconEnableHibernateIOForDriver independently of Syscon version.
0x8B1	?	0xE4AE7852	sceSysconBatteryStopBLModeForDriver. Replaced by Syscon command 0x9B1 on Syscon version > 0x70503.
0x8B2	?	0xE4F29744	sceSysconBatterySetBLCommandForDriver. Replaced by Syscon command 0x9B2 on Syscon version > 0x70503.
0x8B3	?	0x74B2AB55	sceSysconBatteryExecBLCommandForDriver. Replaced by Syscon command 0x9B3 on Syscon version > 0x70503.
0x8B4	?	0x448DAFF1	sceSysconBatteryReadBLCommandForDriver. Replaced by Syscon command 0x9B4 on Syscon version > 0x70503.
0x8C0	?	0xC6A2C9EF	sceSysconCtrlManualChargeModeForDriver (accepts 0 / 1 as value)
0x8C1	?	??	sceSysconCtrlBatteryChargeForDriver (accepts 0 / 1 as value)
0x8C2	?	??	sceSysconCtrlChargingCurrentForDriver (accepts 0x00 - 0x1F as value)
0x8C3	?	??	sceSysconCtrlSupplyCurrentAcForDriver (accepts 0x00 - 0x19 as value)
0x8C4	?	??	sceSysconCtrlSupplyCurrentUsbForDriver (accepts 0x00 - 0x19 as value)
0x8C5	?0x0 or 0x2?	0x3274A925	SceSysconForDriver_3274A925. SceUsbServ and SceUsbEtherSmsc related.
0x8C6	?	0xDFB024C4	sceSysconReadCookieStatusForDriver. SceSblUpdateMgr related.
0x8C7	?	0x87FF8041	SceSysconForDriver_87FF8041. Sends 2 bytes to Syscon.
0x8C8	?	0x7BFA95DA	sceSysconCtrlUSBSupplyForDriver. Sends 2 bytes to Syscon.
0x8C9	?0?	0x451C1662	SceSysconForDriver_451C1662. Sends 2 bytes to Syscon.
0x8CA	1	0x79074DE4	SceSysconForDriver_79074DE4. Sends 0 byte to Syscon.
0x8CB	1	0x7D25F6D2	SceSysconForDriver_7D25F6D2. Sends 1 byte to Syscon.
0x8CC	?0?	0xD2ADABCA	SceSysconForDriver_D2ADABCA. Sends 2 bytes to Syscon.
0x8CE	0x10	0x3B354824	sceSysconGetTemperatureLogForDriver
0x8CF	0	0x3843D657	sceSysconClearTemperatureLogForDriver. Sends 2 bytes to syscon.
0x8D0	?	0xF87679EE	SceSysconForDriver_F87679EE. Sends 2 bytes to Syscon.
0x900	?0x4?	0xC562AF3A	sceSysconGetBatteryRemainCapForDriver. Replaces Syscon command 0x802 on Syscon version > 0x70503.
0x901	0x4	0x03F11220	sceSysconGetBatteryVoltForDriver. Replaces Syscon command 0x803 on Syscon version > 0x70503.
0x902	?0x4?	0xAD0A8275	sceSysconGetBatteryLifePercentForDriver
0x903	0x2	0x26F9D729	sceSysconGetBatteryRemainLevelForDriver. Added on a FW higher than 2.50 and Syscon version >= 0x1040105.
0x904	?	0x9ADC9936	sceSysconGetBatteryCalibDataForDriver
0x910	?
0x911	?
0x912	?
0x913	?
0x914	?
0x915	?
0x916	?
0x917	?
0x932	?
0x944	?
0x945	?
0x952	?		Uses string "PC" then "TUV".
0x953	?
0x954	?
0x961	?
0x962	?
0x963	?
0x964	?
0x965	?
0x966	?
0x967	?
0x968	?
0x969	?
0x980	0x6	0x68E0031E	sceSysconGetBatteryVersionForDriver. Replaces Syscon command 0x882 on Syscon version > 0x70503.
0x981	?0x4?	0x9070F139	sceSysconGetBatteryTempForDriver. Replaces Syscon command 0x8A0 on Syscon version > 0x70503.
0x982	?0x4?	0x00A65FC1	sceSysconGetBatteryFullCapForDriver. Replaces Syscon command 0x8A1 on Syscon version > 0x70503. ScePower related.
0x983	0x2	0x0826BA07	sceSysconGetBatteryElecForDriver. Replaces Syscon command 0x8A2 on Syscon version > 0x70503.
0x984	?0x4?	0xB841C141	sceSysconGetBatteryTTEForDriver. Replaces Syscon command 0x8A3 on Syscon version > 0x70503.
0x985	?0x4?	0x91D3B7A3	sceSysconGetBatterySOHForDriver. Replaces Syscon command 0x8A4 on Syscon version > 0x70503.
0x986	2	0xC2FB5565	sceSysconReadBatteryRegForDriver. Replaces Syscon command 0x8A8 on Syscon version > 0x70503.
0x987	?	0x9B779DB0	sceSysconWriteBatteryRegForDriver. Replaces Syscon command 0x8A9 on Syscon version > 0x70503.
0x988	2	0xA5AB19B1	SceSysconForDriver_A5AB19B1. Replaces Syscon command 0x8AA on Syscon version > 0x70503.
0x989	?	0x87DA378D	sceSysconBatterySWResetForDriver
0x98A	?between 0x2 and 0x4?	0xF93CF833	sceSysconGetBatteryFullCapForDriver
0x98B	?between 0x2 and 0x4?	0xECFA7242 / 0xE1885F68	sceSysconGetBicTempForDriver / sceSysconGetAbbyTempForDriver
0x98C	?0x4?	0xCD73079D	sceSysconGetBatteryCycleCountForDriver
0x9B0	?	0x2CEF078E / 0x4946538A	sceSysconBatteryStartBLModeForDriver. Replaces Syscon command 0x8B0 on Syscon version > 0x70503. Since FW 0.940, it is also used by sceSysconEnableHibernateIOForDriver independently of Syscon version.
0x9B1	?	0xE4AE7852	sceSysconBatteryStopBLModeForDriver. Replaces Syscon command 0x8B1 on Syscon version > 0x70503.
0x9B2	?	0xE4F29744	sceSysconBatterySetBLCommandForDriver. Replaces Syscon command 0x8B2 on Syscon version > 0x70503.
0x9B3	?	0x74B2AB55	sceSysconBatteryExecBLCommandForDriver. Replaces Syscon command 0x8B3 on Syscon version > 0x70503.
0x9B4	?	0x448DAFF1	sceSysconBatteryReadBLCommandForDriver. Replaces Syscon command 0x8B4 on Syscon version > 0x70503.
0xA00	0x0		??
0xA82	?	0x7BAFE083	SceSysconForDriver_7BAFE083. Sends 2 bytes to Syscon.
0x1080	?0x0 or 0x2?	0x81A6060D	sceSysconNvsSetRunModeForDriver
0x1081	?0x0 or 0x2?	0x2EC6D55D	sceSysconNvsSetUnkModeForDriver
0x1082	?around 0x20?	0xACAFA2B8	sceSysconNvsReadDataForDriver
0x1083	?0x2?	0x10C9657A	sceSysconNvsWriteDataForDriver
0x1100	0x4	0xD2F456DC	sceSysconGetErnieDLVersionForDriver
0x1101	0x4
0x1180	?	0x9B00BC7F	sceSysconUpdaterSetSegmentForDriver
0x1181	?	0x356B9696, 0x734544E4	sceSysconUpdaterSendProgramDataForDriver, sceSysconUpdaterSendProgramData2ForDriver
0x1182	?	0x69AD76E4	sceSysconUpdaterExecProgrammingForDriver
0x1183	?	0xB487C2FB	sceSysconUpdaterSetRunModeForDriver
0x1184	?	0xC7747A63	sceSysconUpdaterExecFinalizeForDriver
0x1185	?	0xCBA836FF	sceSysconUpdaterCheckSignatureForDriver. Sends 0x18 bytes to Syscon.
0x1300	0x8	0xCE48E8EB	sceSysconGetConfigStorageInfoForDriver
0x1310	0x1	0x351946B0	SceSysconForDriver_351946B0
0x1382	?	0xA4968B8C	sceSysconBeginConfigstorageTransactionForDriver. Sends 1 byte to Syscon: 0.
0x1383	?	0xFCC3E8EE	sceSysconEndConfigstorageTransactionForDriver. Sends 1 byte to Syscon: 0.
0x1384	?	0x7B9B3617	sceSysconCommitConfigstorageTransactionForDriver. Sends 1 byte to Syscon: 0.
0x1385	?	0x89C5CFD6	sceSysconLoadConfigstorageScriptForDriver. Sends (3 + script_size) bytes to Syscon: script_size (1 byte), unk, script (variable length).
0x1386 (called from ARM Kernel but not implemented in Syscon FW)	?	0xCC6F90A8	sceSysconVerifyConfigstorageScriptForDriver. Sends (3 + script_size) bytes to Syscon: script_size (1 byte), unk, script (variable length).
0x1392	?0?	0xFD65FFCB	SceSysconForDriver_FD65FFCB. Sends 3 bytes to Syscon: 1 byte offset (between 0 and 0xFF), 2 bytes a2 (between 0 and 2).
0x1393	?	0x02350352	SceSysconForDriver_02350352. Sends 2 bytes to Syscon: offset (between 0 and 0xFF)
0x1394	?	0x7DE84CE3	SceSysconForDriver_7DE84CE3. Sends 2 bytes to Syscon: offset (between 0 and 0xFF)
0x2080	?	0x44A173F5	sceSysconJigOpenPortForDriver
0x2081	?	0x483FAE05	sceSysconJigClosePortForDriver
0x2082	?	0xD24BF916	sceSysconJigSetConfigForDriver
0x2083	?	0x3C80B529	receive_pm_sm_jig_msg_from_syscon
0x2084	?	0xCE346793	send_pm_sm_jig_short_msg_to_syscon
0x2085	?	0x7BFBA09E / 0x933D813F	send_pm_sm_jig_msg_to_syscon / send_pm_sm_stop_to_syscon

Callbacks

All the following exported functions have this function prototype: int sceSysconSet...Callback(void (*func)(int enable, void *argp), void *argp);.

Callback name	Callback setter function	State getter function	Callback setter caller	Comments
SYSCON_CB_ACC	#sceSysconSetAccCallbackForDriver	#SceSysconForDriver_B9EA2FA8	SceUsbServ
SYSCON_CB_MULTI_CN_OTG	#sceSysconSetMultiCnOtgCallbackForDriver	NA	SceUsbServ
SYSCON_CB_MINI_USB_OTG	#sceSysconSetMiniUsbOtgCallbackForDriver	NA	SceUsbServ
SYSCON_CB_ALARM	#sceSysconSetAlarmCallbackForDriver	NA	ScePower
?SYSCON_CB_WLANBT?	#SceSysconForDriver_18A6F4D9	#SceSysconForDriver_C0F215B7	SceWlanBt but not used on <= 0.996.090
?SYSCON_CB_HEADPHONE?	#SceSysconForDriver_DE613081	#SceSysconForDriver_C3504ADE	SceHpremote
?SYSCON_CB_MICROPHONE?	#SceSysconForDriver_63352A39	NA	SceHpremote
?SYSCON_CB_REMOTE?	#SceSysconForDriver_35E1689F	#SceSysconForDriver_ACC7F71E	SceHpremote
SYSCON_CB_LOW_BATTERY	#sceSysconSetLowBatteryCallbackForDriver	#sceSysconIsLowBatteryForDriver	ScePower
SYSCON_CB_THERMAL_ALERT	#sceSysconSetThermalAlertCallbackForDriver	#SceSysconForDriver_50CAE242	ScePower
SYSCON_CB_LOW_BATTERY_INIHIBIT_UPDATE_REBOOT	#sceSysconSetLowBatteryInhibitUpdateRebootCallbackForDriver	#sceSysconIsLowBatteryInhibitUpdateRebootForDriver	ScePower
SYSCON_CB_LOW_BATTERY_INIHIBIT_UPDATE_DOWNLOAD	#sceSysconSetLowBatteryInhibitUpdateDownloadCallbackForDriver	#sceSysconIsLowBatteryInhibitUpdateDownloadForDriver	ScePower
SYSCON_CB_BATTERY_ONLINE	#SceSysconForDriver_80D6E061	#SceSysconForDriver_27758A64	ScePower
SYSCON_CB_RESUME_REQUEST	#SceSysconForDriver_9F8340FF	#SceSysconForDriver_A57B5433	ScePower
?	#SceSysconForDriver_2D471528	#SceSysconForDriver_03C50DC3	ScePower	Very similar to SYSCON_CB_LOW_BATTERY.
?	#SceSysconForDriver_7682FE69	#SceSysconForDriver_4A184B7C	No use case seen.	Related to battery.
?	#SceSysconForDriver_E0D52DF0	#SceSysconForDriver_ACEE1C70	No use case seen.	Related to battery.
?	#SceSysconForDriver_229A07C2	#SceSysconForDriver_B832B72C	No use case seen.
?	#SceSysconForDriver_474A9EA7	#SceSysconForDriver_769F9AC4	No use case seen.
?	#SceSysconForDriver_129EA022	#SceSysconForDriver_BFDA5590	ScePower
SYSCON_CB_ALARM_TIMER	#SceSysconForDriver_8351526D	#SceSysconForDriver_86BAAF7D	SceRtc
?	#SceSysconForDriver_2E4BA4B8	#SceSysconForDriver_29CF4335	No use case seen.	Used in SceSblPostSsMgr.
?	#SceSysconForDriver_4E88B4D9	#SceSysconForDriver_4BC63A40	SceBbmc	Used in SceSblPostSsMgr.
?	#SceSysconForDriver_376CCCB8	#SceSysconForDriver_99A254A9	No use case seen.
?	#SceSysconForDriver_3BAAC8A9	#SceSysconForDriver_9A4F4B7C	No use case seen.
?	#SceSysconForDriver_85E5DEBF	#SceSysconForDriver_63B14156	SceBbmc
?	#SceSysconForDriver_14730196	NA	No use case seen.
?	#SceSysconForDriver_C442D0BE	#SceSysconForDriver_9F4042F8	No use case seen.
?	#SceSysconForDriver_61AE3970	#SceSysconForDriver_C50568E9	No use case seen.
?	#SceSysconForDriver_423D0C58	NA	No use case seen.
?	#SceSysconForDriver_154676F1	NA	No use case seen.