SceSystimer

Manages the system timers. This module wraps the Hardware Timers and add some functionalities, along with providing a consistent interface.

Module

Version	World	Privilege
0.931-3.65	Non-secure	Kernel

Libraries

Known NIDs

Version	Name	World	Visibility	NID
0.931-3.65	SceSystimerForDriver	Non-secure	Kernel	0xA47EB09A

Types

#define SYSTIMER_TYPE_LONG 1      //<! 64-bit timer
#define SYSTIMER_TYPE_WORD 2      //<! 32-bit timer
typedef SceInt32 SceSystimerType;

#define SYSTIMER_CLKSRC_SYS   0   //<! The clock controlled by scePowerSetSysClockFrequency
#define SYSTIMER_CLKSRC_48MHZ 3   //<! A clock running at a fixed frequency of 48MHz
typedef SceUInt32 SceSystimerClkSrc;

typedef SceInt32 SceSystimerId;

typedef void (*SceSystimerCallback)(SceSystimerId timer, void* pUserData);

SceSystimerForDriver

sceKernelSysTimerAllocForDriver

Version	NID
0.990-3.60	0xE2B9D8E9

SceSystimerId sceKernelSysTimerAllocForDriver(SceSystimerType type);

SceSystimerForDriver_0450933B

Version	NID
3.65	0x0450933B

Sets the timer's clock source. Timer must not be counting.

//
// Timer frequency = (clock source frequency) / (prescaleFactor + 1)
//
// if (a2 < 0x10), written to bits 0x00F00000
// else (a2 & 0x7) written to bits 0x00000700 and 0x2 written to bits 0x00F00000
// a3 written to bits 0xFF000000
SceInt32 SceSystimerForDriver_0450933B(SceSystimerId timer, SceSystimerClkSrc src, SceUInt32 prescaleFactor);

SceSystimerForDriver_1B14DFD6

Version	NID
3.65	0x1B14DFD6

Sets the timer's counter value and increments the accumulating counter by counter.

SceInt32 SceSystimerForDriver_1B14DFD6(SceSystimerId timer, SceKernelSysClock counter);

SceSystimerForDriver_59EBD22D

Version	NID
3.65	0x59EBD22D

Starts the timer.

SceInt32 SceSystimerForDriver_59EBD22D(SceSystimerId timer);

SceSystimerForDriver_7DEBA6A5

Version	NID
3.65	0x7DEBA6A5

Resets the timer's count. Sets current and accumulated counter to 0.

SceInt32 SceSystimerForDriver_7DEBA6A5(SceSystimerId timer);

SceSystimerForDriver_8358611F

Version	NID
3.65	0x8358611F

Stops the timer if active, and frees the timer. (sceKernelSysTimerFree)

SceInt32 SceSystimerForDriver_8358611F(SceSystimerId timer);

SceSystimerForDriver_85AAE0DD

Version	NID
3.65	0x85AAE0DD

Obtains the timer's accumulated count (i.e. *a2 = timer->currentCounter + (sum of counter of each time interrupt was triggered))

SceInt32 SceSystimerForDriver_85AAE0DD(SceSystimerId timer, SceKernelSysClock* a2);

SceSystimerForDriver_904DF737

Version	NID
3.65	0x904DF737

Edits some bits (mask 0x000F0080) of the timer's config register. Timer must not be counting.

// a2 written to bits 0x000F0000
// a3 written to bit  0x00000080
// additionaly, config register is also |= 0x40
SceInt32 SceSystimerForDriver_904DF737(SceSystimerId timer, SceUInt32 a2, SceBool a3);

SceSystimerForDriver_963F7C0D

Version	NID
3.65	0x963F7C0D

Obtains the current value of the timer's counter (i.e. *a2 = timer->currentCount).

SceInt32 SceSystimerForDriver_963F7C0D(SceSystimerId timer, SceKernelSysClock* a2);

SceSystimerForDriver_A73351C1

Version	NID
3.65	0xA73351C1

Sets the timer's interval (cycles count). Timer must not be counting.

SceInt32 SceSystimerForDriver_A73351C1(SceSystimerId timer, SceKernelSysClock interval);

SceSystimerForDriver_BF8D42B0

Version	NID
3.65	0xBF8D42B0

Stops the timer.

SceInt32 SceSystimerForDriver_BF8D42B0(SceSystimerId timer);

SceSystimerForDriver_C34D7940

Version	NID
3.65	0xC34D7940

Edits some bits (mask 0x0000F000) of the timer's config register. Timer must not be counting.

// a2 written to bits 0x0000F000
// additionaly, config register is also |= 0x20
SceInt32 SceSystimerForDriver_C34D7940(SceSystimerId timer, SceUInt32 a2);

SceSystimerForDriver_CCCD1EE3

Version	NID
3.65	0xCCCD1EE3

(Un)registers an interrupt handler for the timer.

/*
 * cb will be invoked whenever the timer generates an interrupt (that is, when the counter reaches the threshold set via SceSystimerForDriver_A73351C1())
 * timer and pUserData arguments will be the same as provided to this function
 * cb will only be called if SceSystimerForDriver_A73351C1() has been called with non-zero argument (e.g. timer has a threshold)
 * cb can be NULL, in which case targetCPU will not be set
 *
 * targetCPU follows the same rules as sceKernelSetIntrTarget() - see SceKernelIntrMgr for more info
 */
SceInt32 SceSystimerForDriver_CCCD1EE3(SceSystimerId timer, SceSystimerCallback cb, SceUInt32 targetCPU, void* pUserData);

SceSystimerForDriver_FD5F1742

Version	NID
3.65	0xFD5F1742

Reads some ?counter? from the timer.

SceInt32 SceSystimerForDriver_FD5F1742(SceSystimerId timer, SceKernelSysClock* a2);