EHCI: Difference between revisions
Jump to navigation
Jump to search
SilicAndPina (talk | contribs) m (capitalize "usb") |
SilicAndPina (talk | contribs) m (add "offical" to "only documented usage of this port" because its no longer the only one since homebrew devs have made it work in the past.) |
||
| Line 33: | Line 33: | ||
[[File:accessory_port_usage.png|thumb|From FCC filing for AK8PDE1001A]] | [[File:accessory_port_usage.png|thumb|From FCC filing for AK8PDE1001A]] | ||
The only documented usage of this port is from an FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework. | The only documented official usage of this port is from an FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework. | ||
[[Category:USB]] | [[Category:USB]] | ||
Revision as of 21:55, 12 June 2020
The accessory port found only on the original Vita models is a custom port USB interface. The port must be activated in software and so far, there does not seem to be any official public software that uses it. It was thought that as of firmware 1.69, all APIs that reference the accessory port are permanently disabled. however this isnt true, even on 3.73 the accessory port can be enabled using sceUsbServAccessoryActivate and disabled with sceUsbServAccessoryDeactivate
| Pin | Name | Description |
|---|---|---|
| 1 | GND | Ground - On the side with the mounting hole that has threads |
| 2 | ID (1.8v) | USB OTG. |
| 3 | D- | USB Data |
| 4 | D+ | USB Data |
| 5 | VBUS (3.3v) | Power |
The only documented official usage of this port is from an FCC filing for the PDEL-1001 development unit. It seems that some dongle attached to the device is used as part of their hardware testing framework.