SceSystimer: Difference between revisions
m (Reword + add some RE by Bythos) |
m (→SceSystimerForDriver_A73351C1: Use official name for description and arguments) |
||
Line 165: | Line 165: | ||
|} | |} | ||
Sets the timer's | Sets the timer's interval (cycles count). Timer must not be counting. | ||
<source lang="C">SceInt32 SceSystimerForDriver_A73351C1(SceSystimerId timer, SceKernelSysClock | <source lang="C">SceInt32 SceSystimerForDriver_A73351C1(SceSystimerId timer, SceKernelSysClock interval);</source> | ||
=== SceSystimerForDriver_BF8D42B0 === | === SceSystimerForDriver_BF8D42B0 === |
Revision as of 19:36, 27 October 2024
Manages the system timers. This module wraps the Hardware Timers and add some functionalities, along with providing a consistent interface.
Module
Version | World | Privilege |
---|---|---|
0.931-3.65 | Non-secure | Kernel |
Libraries
Known NIDs
Version | Name | World | Visibility | NID |
---|---|---|---|---|
0.931-3.65 | SceSystimerForDriver | Non-secure | Kernel | 0xA47EB09A |
Types
#define SYSTIMER_TYPE_LONG 1 //<! 64-bit timer #define SYSTIMER_TYPE_WORD 2 //<! 32-bit timer typedef SceInt32 SceSystimerType; #define SYSTIMER_CLKSRC_SYS 0 //<! The clock controlled by scePowerSetSysClockFrequency #define SYSTIMER_CLKSRC_48MHZ 3 //<! A clock running at a fixed frequency of 48MHz typedef SceUInt32 SceSystimerClkSrc; typedef SceInt32 SceSystimerId; typedef void (*SceSystimerCallback)(SceSystimerId timer, void* pUserData);
SceSystimerForDriver
sceKernelSysTimerAllocForDriver
Version | NID |
---|---|
0.990-3.60 | 0xE2B9D8E9 |
SceSystimerId sceKernelSysTimerAllocForDriver(SceSystimerType type);
SceSystimerForDriver_0450933B
Version | NID |
---|---|
3.65 | 0x0450933B |
Set the timer's frequency. Timer must not be counting.
// // Timer frequency = (clock source frequency) / (prescaleFactor + 1) // // if (a2 < 0x10), written to bits 0x00F00000 // else (a2 & 0x7) written to bits 0x00000700 and 0x2 written to bits 0x00F00000 // a3 written to bits 0xFF000000 SceInt32 SceSystimerForDriver_0450933B(SceSystimerId timer, SceSystimerClkSrc src, SceUInt32 prescaleFactor);
SceSystimerForDriver_1B14DFD6
Version | NID |
---|---|
3.65 | 0x1B14DFD6 |
Sets the timer's counter value and increments the accumulating counter by counter
.
SceInt32 SceSystimerForDriver_1B14DFD6(SceSystimerId timer, SceKernelSysClock counter);
SceSystimerForDriver_59EBD22D
Version | NID |
---|---|
3.65 | 0x59EBD22D |
Starts the timer.
SceInt32 SceSystimerForDriver_59EBD22D(SceSystimerId timer);
SceSystimerForDriver_7DEBA6A5
Version | NID |
---|---|
3.65 | 0x7DEBA6A5 |
Resets the timer. Sets current and accumulated counter to 0.
SceInt32 SceSystimerForDriver_7DEBA6A5(SceSystimerId timer);
SceSystimerForDriver_8358611F
Version | NID |
---|---|
3.65 | 0x8358611F |
Stops the timer if active, and frees the timer. (sceKernelSysTimerFree
)
SceInt32 SceSystimerForDriver_8358611F(SceSystimerId timer);
SceSystimerForDriver_85AAE0DD
Version | NID |
---|---|
3.65 | 0x85AAE0DD |
Obtains the timer's accumulated count (i.e. *a2 = timer->currentCounter + (sum of counter of each time interrupt was triggered)
)
SceInt32 SceSystimerForDriver_85AAE0DD(SceSystimerId timer, SceKernelSysClock* a2);
SceSystimerForDriver_904DF737
Version | NID |
---|---|
3.65 | 0x904DF737 |
Edits some bits (mask 0x000F0080) of the timer's config register. Timer must not be counting.
// a2 written to bits 0x000F0000 // a3 written to bit 0x00000080 // additionaly, config register is also |= 0x40 SceInt32 SceSystimerForDriver_904DF737(SceSystimerId timer, SceUInt32 a2, SceBool a3);
SceSystimerForDriver_963F7C0D
Version | NID |
---|---|
3.65 | 0x963F7C0D |
Obtains the current value of the timer's counter (i.e. *a2 = timer->currentCount
).
SceInt32 SceSystimerForDriver_963F7C0D(SceSystimerId timer, SceKernelSysClock* a2);
SceSystimerForDriver_A73351C1
Version | NID |
---|---|
3.65 | 0xA73351C1 |
Sets the timer's interval (cycles count). Timer must not be counting.
SceInt32 SceSystimerForDriver_A73351C1(SceSystimerId timer, SceKernelSysClock interval);
SceSystimerForDriver_BF8D42B0
Version | NID |
---|---|
3.65 | 0xBF8D42B0 |
Stops the timer.
SceInt32 SceSystimerForDriver_BF8D42B0(SceSystimerId timer);
SceSystimerForDriver_C34D7940
Version | NID |
---|---|
3.65 | 0xC34D7940 |
Edits some bits (mask 0x0000F000) of the timer's config register. Timer must not be counting.
// a2 written to bits 0x0000F000 // additionaly, config register is also |= 0x20 SceInt32 SceSystimerForDriver_C34D7940(SceSystimerId timer, SceUInt32 a2);
SceSystimerForDriver_CCCD1EE3
Version | NID |
---|---|
3.65 | 0xCCCD1EE3 |
(Un)registers an interrupt handler for the timer.
/* * cb will be invoked whenever the timer generates an interrupt (that is, when the counter reaches the threshold set via SceSystimerForDriver_A73351C1()) * timer and pUserData arguments will be the same as provided to this function * cb will only be called if SceSystimerForDriver_A73351C1() has been called with non-zero argument (e.g. timer has a threshold) * cb can be NULL, in which case targetCPU will not be set * * targetCPU follows the same rules as sceKernelSetIntrTarget() - see SceKernelIntrMgr for more info */ SceInt32 SceSystimerForDriver_CCCD1EE3(SceSystimerId timer, SceSystimerCallback cb, SceUInt32 targetCPU, void* pUserData);
SceSystimerForDriver_FD5F1742
Version | NID |
---|---|
3.65 | 0xFD5F1742 |
Reads some ?counter? from the timer.
SceInt32 SceSystimerForDriver_FD5F1742(SceSystimerId timer, SceKernelSysClock* a2);