GPIO Registers: Difference between revisions
Jump to navigation
Jump to search
| Line 99: | Line 99: | ||
|- | |- | ||
| 16 | | 16 | ||
| | | GPO 0 | ||
|- | |- | ||
| 17 | | 17 | ||
| | | GPO 1 | ||
|- | |- | ||
| 18 | | 18 | ||
| | | GPO 2 | ||
|- | |- | ||
| 19 | | 19 | ||
| | | GPO 3 | ||
|- | |- | ||
| 20 | | 20 | ||
| | | GPO 4 | ||
|- | |- | ||
| 21 | | 21 | ||
| | | GPO 5 | ||
|- | |- | ||
| 22 | | 22 | ||
| | | GPO 6 | ||
|- | |- | ||
| 23 | | 23 | ||
| | | GPO 7 | ||
|- | |- | ||
| 24 | | 24 | ||
Revision as of 14:37, 10 August 2019
MMIO Interfaces
| Name | Physical address |
|---|---|
| SceGpio0Reg | 0xE20A0000 |
| SceGpio1Reg | 0xE0100000 |
Registers
| Offset | Size | Description |
|---|---|---|
| 0x00 | 4 | Port mode (1=out, 0=in) (1 bit each port) |
| 0x04 | 4 | Port read (1=low, 0=high?) (1 bit each port) |
| 0x08 | 4 | Port set (1 bit each port) |
| 0x0C | 4 | Port clear (1 bit each port) |
| 0x14 | 4 | Interrupt mode (2 bits) for interrupts 0-15 |
| 0x18 | 4 | Interrupt mode (2 bits) for interrupts 16-31 |
| 0x34 | 4 | Port read latched? (1=low, 0=high?) (1 bit each port) |
It looks like +0x10,+0x14,+0x18,+0x1C,+0x20 are related to interrupt enable, and +0x38,+0x3C,+0x40,+0x44,+0x48 to interrupt ack.
GPIO Bus 0 ports
| Port | Description |
|---|---|
| 0 | OLED/LCD |
| 1 | unk |
| 2 | unk |
| 3 | Syscon related (output) |
| 4 | Syscon related (input) |
| 5 | UDCD (USB Device Controller Driver) related |
| 6 | Game card LED |
| 7 | PS Button Blue LED |
| 8 | unk |
| 9 | Camera |
| 12 | UDCD (USB Device Controller Driver) related |
| 13 | HDMI related (input) |
| 14 | unk |
| 15 | HDMI related (output) |
| 16 | GPO 0 |
| 17 | GPO 1 |
| 18 | GPO 2 |
| 19 | GPO 3 |
| 20 | GPO 4 |
| 21 | GPO 5 |
| 22 | GPO 6 |
| 23 | GPO 7 |
| 24 | UDCD (USB Device Controller Driver) related |
| 25 | unk |
| 26 | unk |
| 27 | Motion related |
| 28 | Motion related |
| 29 | unk |
| 30 | 3G Modem related |
| 31 | unk |