PUP

PUP files are update archives for the PSP, PS3, PSVita and PS4.

PUP Structure

A good resource on the PUP structure can be found HERE.

Update .PKG files

Most of the files in the update PUP are .pkg files, a sort of Certified File.

Each component of the update is broken up into multiple parts, then optionally compressed, and finally encrypted into the PKG.

Package Header

Right after the Certified File header (usually at offset 0x400) is the update package header that provides information for piecing the component back together. The contents of this header is as follows:

Offset	Size	Description
0x0	0x4	Version (0x4)
0x4	0x4	Type ID
0x8	0x4	Flags
0xC	0x4	?
0x10	0x8	Update FW Version
0x18	0x8	Final (decompressed) size
0x20	0x8	Decrypted size
0x28	0x4	Flags requirements: 0 normal, 1 QA flag (sceQafMgrIsAllowQAUpdateForDriver) required, 2 manufacturing mode required
0x2C	0x4	Platform: 0 all platforms accepted, 0x40000000 CEX, 0x10000000 Devtool
0x30	0x4	?
0x34	0x4	?
0x38	0xC	?
0x3C	0x4	?
0x40	0x8	?
0x48	0x8	?
0x50	0x8	Offset
0x58	0x8	Size
0x60	0x8	Chunk No (part index)
0x68	0x8	Total Chunks (total parts)
0x70	0x8	?
0x78	0x8	?

Flags

There are flags that are set in the package header. Some potential ones are listed here.

Flag	Description
0x10	Set when compressed
0x2	Has multiple parts
0x1	Set when compressed

Type ID

The type id determines which decryption routine to use in SceSblSsUpdateMgr. There is a truth table to determine which id can be handled by which decryption function. To see how this table is used, check out the example code for decrypting packages.

Type ID	Func 1?	Func 2?	Func 3?
0x0	No	No	No
0x1	Yes	Yes	No
0x2	No	No	No
0x3	No	No	Yes
0x4	No	No	Yes
0x5	No	No	No
0x6	No	No	No
0x7	No	No	No
0x8	Yes	Yes	No
0x9	Yes	Yes	No
0xA	Yes	Yes	Yes
0xB	Yes	Yes	No
0xC	Yes	Yes	No
0xD	Yes	Yes	No
0xE	No	No	No
0xF	Yes	Yes	No
0x10	Yes	Yes	No
0x11	Yes	Yes	No
0x12	Yes	Yes	No
0x13	Yes	Yes	No
0x14	Yes	Yes	No
0x15	Yes	Yes	Yes
0x16	Yes	Yes	Yes
0x17	Yes	Yes	Yes
0x18	Yes	Yes	No
0x19	Yes	Yes	No
0x1A	No	No	No
0x1B	No	No	Yes

Type ID (Identifier)

The type ID is also used to identify the component of the update.

Type ID	Note
0x0
0x1	os0 partition
0x2
0x3
0x4	Permissions related to TAR archives of type 0x16
0x5
0x6
0x7
0x8	Syscon Firmware (0x9A54 run mode) Syscon Update
0x9	SLB2 bootloaders
0xA	vs0 partition
0xB	Cp Firmware (same file as PUP entry 0x2006)
0xC	Motion Firmware
0xD	Bbmc related
0xE
0xF	Motion Firmware
0x10	Touch Firmware
0x11	Touch Config
0x12	Bic Firmware
0x13	Bic Firmware
0x14	Syscon Update (0x3665 run mode)
0x15
0x16	TAR archive, patch update for vs0
0x17	sa0 partition
0x18	pd0 partition
0x19	Syscon Update (0xC5E7 run mode)
0x1A
0x1B	PSP Emulator lists

SCEWM

PUP Watermark is present since at least FW 0.931.010. It was not present on FW 0.902.000.

Header

This is a watermark for PUPs. For development PUPs, the Issue ID is unique to the company/organization the PUP is issued to.

Offset	Size	Description
0x0	0x6	Magic ('SCEWM\0')
0x6	0x2	?Version? (ex: 00 01)
0x8	0x4	Unknown (ex: 01 00 00 00)
0xC	0x4	File Size (usually 0x1000)
0x10	0x4	Message length (ex: 0xD9, 0x5A)
0x14	0x4	Unknown (ex: 01 00 00 00)
0x18	0x4	Unknown (ex: 01 00 00 00)
0x1C	0x4	Unknown (ex: 01 00 00 00)

The message length for prototype/retail PUPs is almost always 0x5A, see below why.

Content

The SCEWM file is composed of 3 parts:

• SCEWM header: size 0x20 bytes.
• SCEWM body: size = file_size(usually 0x1000) - header_size(0x20). This part is encrypted.

Body

The body is encrypted using AES128CBC with key and iv from update_service_sm.self.

After decryption, the data is composed of 3 parts:

• 0x100 bytes: RSA2048 signature of the PUP (regardless of the watermark). It is verified with SCEWM RSA public key.
• 0xDE0 bytes: plaintext ASCII message (unique data per issue ID or build time).
• 0x100 bytes: RSA2048 signature of that message + the PUP signature + the SCEWM header. It is verified with SCEWM RSA public key.

PUP RSA Signature

It is RSA2048 of the PUP without SCEWM (to detail). It is verified with SCEWM RSA public key.

Message

Default Watermark Message

For PUP not bound to a developer, not downloaded on DevNet, such as prototype and retail PUP, the watermark has a default message.

0.931-3.73:

desc: default watermark
id: build_team
timestamp: YYYYMMDD_HHmmSS_JST
host: build_machine

DevNet Watermark Message

The message is generated on developer's demand by DevNet server, written to the PUP, then the PUP download starts. The message syntax has changed with DevNet revisions.

The message is totally independant of the PUP. The same PUP (for example PSVita FW 0.945 PUP) downloaded from DevNet in 2011 and in 2018 has different message syntax.

Here 'x' represents an actual character, which I hide for confidentiality.

Old message (2011-02)

# PUP watermark data that contain DevNet user id, org name, company name, date of PUP downloaded and host IP address
User id:xxxxxx
Org name:xxxxxxxxxxxxxx
Company name:xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Date PUP downloaded:YYYY-MM-DD HH:mm
Host IP address:xxx.xxx.xxx.xxx

Recent message (2018-04)

# PUP watermark data contain a serial_number that associates with the user who download this PUP
# Provide the serial number below to the DevNet development team to get user and org details.
PUP serial number:xxxxxxxx

SCEWM RSA Signature

It is RSA2048 of 0xF00 bytes: the header + the decrypted body. It is verified with SCEWM RSA public key.

Security

When comparing the same PUP signed for two different issue IDs, we can notice only 2 differences:

• sometimes the message length in SCEWM header
• the SCEWM encrypted unique data: the blocks of the message that differ and the RSA signature of the message

SCEAS

This file contains Additional Signature(s) (A.S.) necessary for validation of the PUP.

It was added on FW 0.996, probably for security reasons. This file is missing inside the Prototype DevKit PUP 0.945.040 (and all the pre-0.996 PUPs).

Header

Offset	Size	Description
0x0	0x6	Magic ('SCEAS\0')
0x6	0x2	?Version? (ex: 00 01)
0x8	0x4	Unknown (ex: 01 00 00 00)
0xC	0x4	File Size (usually 0x400)
0x10	0x4	Unknown (ex: 01 00 00 00)
0x14	0x4	Unknown (ex: 01 00 00 00)
0x18	0x4	Unknown (ex: 01 00 00 00)
0x1C	0x4	Certainly padding. (ex: 00 00 00 00)

Body

The body is encrypted using AES128CBC with key and iv from update_service_sm.self.

Once decrypted, we can usually see 3 parts:

• 0x100 bytes: RSA2048 signature, certainly of the PUP. It is verified with SCEAS RSA public key.
• 0x1E0 bytes: zeroes, maybe area for more than one signature, or just padding for decryption.
• 0x100 bytes: RSA2048 signature of the Additional Signature(s). It is verified with SCEAS RSA public key.