SceOled: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
Line 164: Line 164:
Enables the OLED by setting the GPIO bus 0 port 0.
Enables the OLED by setting the GPIO bus 0 port 0.


=== SceOledForDriver_9F4ABDDC ===
=== SceOledForDriver_9F4ABDDC_get_status ===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Version !! NID
! Version !! NID
|-
|-
| 3.60 || 0x9F4ABDDC
| 0.940-3.60 || 0x9F4ABDDC
|}
|}


<source lang="c">int SceOledForDriver_9F4ABDDC_is_disabled(void);</source>
Returns the OLED status by reading the GPIO bus 0 port 0.


Returns the OLED status by reading the GPIO bus 0 port 0.
<source lang="c">int SceOledForDriver_9F4ABDDC_get_status(void);</source>


=== sceOledDisplayOffForDriver ===
=== sceOledDisplayOffForDriver ===

Revision as of 01:50, 8 April 2020

Module

Known NIDs

Version Name World Privilege NID
1.69 SceOled Non-secure Kernel 0x5410837A

Libraries

Known NIDs

Version Name World Visibility NID
1.69 SceOledForDriver Non-secure Kernel 0x60C7478A

Resources

TODO: move to OLED.

Types

enum SceOledError {
    SCE_OLED_ERROR_INVALID_BRIGHTNESS_VALUE = 0x803F0A02,
    SCE_OLED_ERROR_INVALID_READY_STATUS = 0x803F0A03,
    SCE_OLED_ERROR_NOT_READY = 0x803F0A04,
    SCE_OLED_ERROR_INTERNAL = 0x803F0A05
};

enum SceOledStatus {
    SCE_OLED_STATUS_NOT_READY = 0,
    SCE_OLED_STATUS_READY = 1,
    SCE_OLED_STATUS_ERROR = 2
};

struct SceOledCmd {
    unsigned char cmd,
    unsigned char size,
    unsigned char buf[size]
}

A cmd_queue is a contiguous array of SceOledCmd of different sizes. To get the next SceOledCmd of a queue, do:

struct SceOledCmd *cur_cmd = ...
struct SceOledCmd *next_cmd = &(cur_cmd->buf) + cur_cmd->size;

if (next_cmd->cmd == 0 || next_cmd->cmd == 255) {...} // End of queue

Available commands

Cmd Size Buf Description
178 1 Unknown Unknown
249 1 or 22 Unknown, for example <0x01, 0xCFBE9F9F, 0xCBC2C9D7, 0xDEE3E1BB, 0xFAD3D0D6, 0x002FE6ED, 0x2F> (Little-Endian) Change Brightness

SceOledForDriver

sceOledWaitReadyForDriver

Version NID
3.60 0x0CC6BCB4
int sceOledWaitReadyForDriver();

Waits until the OLED has been initialized.

SceOledForDriver_26F9EEA8

Version NID
3.60 0x26F9EEA8
int SceOledForDriver_26F9EEA8_oled_disable(void);

Disables the OLED by clearing the GPIO bus 0 port 0.

SceOledForDriver_2F0C4B67

Version NID
3.60 0x2F0C4B67
int SceOledForDriver_2F0C4B67_send_cmd(u8 cmd, void *buffer, int size);

Sends a command to the OLED (via SPI).

sceOledGetBrightnessForDriver

Version NID
3.60 0x43EF811A
int ceOledGetBrightnessForDriver();

Get the wide brightness value (0-65536).

sceOledDisplayOnForDriver

Version NID
3.60 0x4C7836C7
int sceOledDisplayOnForDriver();

sceOledGetDisplayColorSpaceModeForDriver

Version NID
3.60 0x4F8A1D4A
int sceOledGetDisplayColorSpaceModeForDriver(void);

SceOledForDriver_6B1E0B52

Version NID
3.60 0x6B1E0B52
int SceOledForDriver_6B1E0B52_oled_enable(void);

Enables the OLED by setting the GPIO bus 0 port 0.

SceOledForDriver_9F4ABDDC_get_status

Version NID
0.940-3.60 0x9F4ABDDC

Returns the OLED status by reading the GPIO bus 0 port 0.

int SceOledForDriver_9F4ABDDC_get_status(void);

sceOledDisplayOffForDriver

Version NID
3.60 0xBC84602E
int sceOledDisplayOffForDriver();

sceOledGetDDBForDriver

Version NID
3.60 0xC9D5987C
int sceOledGetDDBForDriver(unsigned short *supplier_id, unsigned short *supplier_elective_data);

Returns the Device Descriptor Block (DDB), read with MIPI DSI command read_DDB_start (0xA1).

sceOledSetDisplayColorSpaceModeForDriver

Version NID
3.60 0xDABBD9D3
int sceOledSetDisplayColorSpaceModeForDriver(int mode);

SceOledForDriver_E30604CC

Version NID
3.60 0xE30604CC
int SceOledForDriver_E30604CC_dispatch_cmd_list(void);

Dispatches the OLED cmd list (using ksceOledForDriver_2F0C4B67).

sceOledSetBrightnessForDriver

Version NID
3.60 0xF9624C47
int sceOledSetBrightnessForDriver(unsigned int brightness);

Set the brightness (brightness needs to be in the range 0-65536). 0 means screen turned off, 1 means screen dimmed (like if you wait for a long time without touching your screen).

The brightness has actually 17 different values: 1 special value for brightness=0, and 16 different values for the rest (real_value=brightness/4096).

SceOledForDriver_ED2D6F19_set_status

Version NID
0.940-3.60 0xED2D6F19

Used to enable or disable.

// status: 0: disable, 1: enable
int SceOledForDriver_ED2D6F19_set_status(int status);

SceOledForDriver_DDB1412B_reset

Version NID
0.940-3.60 0xDDB1412B

Used to reset.

int SceOledForDriver_DDB1412B_reset(void);