SPI Registers: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 55: | Line 55: | ||
| 0x18 | | 0x18 | ||
| 4 | | 4 | ||
| | | ?? | ||
| Start transfer (bit 0 or 1), transfer direction (bit 0 or 1)? | | Start transfer (bit 0 or 1), transfer direction (bit 0 or 1)? | ||
|- | |- | ||
Line 65: | Line 65: | ||
| 0x28 | | 0x28 | ||
| 4 | | 4 | ||
| | | SPI_RXFIFO_STATUS | ||
| Number of available bytes to read from the FIFO | | Number of available bytes to read from the RX FIFO | ||
|- | |- | ||
| 0x2C | | 0x2C | ||
| 4 | | 4 | ||
| | | SPI_TXFIFO_STATUS | ||
| Number of pending bytes in the write the FIFO (maximum = 0x7F) | | Number of pending bytes in the write the TX FIFO (maximum = 0x7F) | ||
|} | |} | ||
== Notes == | == Notes == | ||
Registers seem to be very similar to https://github.com/torvalds/linux/blob/master/drivers/spi/spi-sun4i.c | Registers seem to be very similar to https://github.com/torvalds/linux/blob/master/drivers/spi/spi-sun4i.c |
Revision as of 20:20, 28 May 2021
MMIO Interfaces
Name | Physical address |
---|---|
SceSpi0Reg (SceSyscon) | 0xE0A00000 |
SceSpi1Reg (SceMotionDev) | 0xE0A10000 |
SceSpi2Reg (SceOled, SceLcd) | 0xE0A20000 |
Registers
Offset | Size | Name | Description |
---|---|---|---|
0x00 | 4 | SPI_RXDATA | Read FIFO |
0x04 | 4 | SPI_TXDATA | Write FIFO |
0x08 | 4 | SPI_CTL | Configuration |
0x0C | 4 | SPI_INTCTL | Interrupt control? |
0x10 | 4 | SPI_ST | Start transfer (write 0b1), cancel transfer(write 0b0), transfer busy (reads bit0 = 0)? |
0x14 | 4 | SPI_DMACTL | ?? |
0x18 | 4 | ?? | Start transfer (bit 0 or 1), transfer direction (bit 0 or 1)? |
0x24 | 4 | SPI_TC | Flags? |
0x28 | 4 | SPI_RXFIFO_STATUS | Number of available bytes to read from the RX FIFO |
0x2C | 4 | SPI_TXFIFO_STATUS | Number of pending bytes in the write the TX FIFO (maximum = 0x7F) |
Notes
Registers seem to be very similar to https://github.com/torvalds/linux/blob/master/drivers/spi/spi-sun4i.c