Memory System: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
(→‎Bus Error Attribute: Add more information about attribute register)
(Add location of all SSX regs base addresses, add / rework registers descriptions)
 
Line 35: Line 35:


== Generalities ==
== Generalities ==
The bus fabric of Kermit is made of several SonicsSX® interconnects on which peripherals are connected.
All communication is done using the OCP protocol; however, adapters (e.g., AXI2OCP for Cortex-A9) may be present at Agent level.


There are three revisions of the memory system layout:
There are three revisions of the memory system layout:
* Original layout for Kermit1.0 ES1 - uses the SMX interconnect (same as BeagleBoard SoC)
* Original layout for Kermit1.0 ES1 - uses the SMX interconnect (as found in BeagleBoard SoC) instead of SSX
* Second revision for Kermit1.0 ES2 - very close to the final revision, uses the SSX interconnect
* Second revision for Kermit1.0 ES2 - very close to the final revision, uses the SSX interconnect
* Third and final revision for Kermit1.0 ES3 and later
* Third and final revision for Kermit1.0 ES3 and later
Line 52: Line 56:
This is sometimes used for access checks, or to identify transaction initiator when a bus error occurs.
This is sometimes used for access checks, or to identify transaction initiator when a bus error occurs.


== Control registers ==
== Interconnect registers ==
 
There are register blocks associated to each interconnect in the system. These blocks are always 1KiB (0x400 bytes), and the registers inside them are always 64-bit.
 
=== Location ===
 
{| class="wikitable" style="text-align: center"
|-
! Address !! Name !! UIID
|-
| 0xEC000000 || Main Xbar || 0
|-
| 0xEC100000 || Center Xbar || 1
|-
| 0xEC200000 || Video Xbar || 2
|-
| 0xEC300000 || IFTU Xbar || 3
|-
| 0xEC400000 || VIP Xbar || 4
|-
| 0xEC500000 || Debug Bus || 5
|-
| 0xEC600000 || DMAC Xbar || 6
|-
| 0xED000000 || IO Slave Bus || 8
|-
| 0xED100000 || IO Master Bus || 9
|-
| 0xED200000 || Pervasive Bus || 10
|-
| 0xED300000 || Misc IO Bus || 11
|-
| 0xED400000 || North IO Master Bus || 12
|-
| 0xED500000 || Audio Bus || 13
|-
| 0xED600000 || North IO Slave Bus || 14
|-
| 0xED700000 || SRC Bus || 15
|-
| 0xED800000 || GPU Register Bus || 16
|-
| 0xED900000 || IFTU Register Bus || 17
|-
| 0xEE000000 || Camera Slave Bus || 24
|-
| 0xEE100000 || Camera Master Bus || 25
|-
| 0xEE200000 || USB Slave Bus || 26
|-
| 0xEE300000 || USB Master Bus || 27
|-
| 0xEE400000 || SubLCD Slave Bus || 28
|-
| 0xEE500000 || SubLCD Master Bus || 29
|-
| 0xEE600000 || Camera Register Bus || 30
|-
| 0xE00C0000 || Cry/SBL Bus || 48
|-
|}
 
The <code>UIID</code> column indicates the '''U'''nique '''I'''nterconnect '''ID'''.
Bit <code>N</code> of BEBT register indicates an error is pending on interconnect with UUID <code>N</code>.


There are several MMIO registers available to alter the behavior of the memory system, or query information about the memory system's state.
Each interconnect register group is divided as follows:
{| class="wikitable" style="text-align: center"
|-
! Address mask !! Sub-block !! Description
|-
| <code>0xEoo00000</code> || ? || ?Sideband Interconnect?
|-
| <code>0xEoo1xx00</code> || ? || IA-related (Only present if IA exists at <code>0xEoo4xx00</code>)
|-
| <code>0xEoo30000</code> || ? || ?
|-
| <code>0xEoo30400</code> || ? || ?
|-
| <code>0xEoo3C000</code> || ? || ?
|-
| <code>0xEoo4xx00</code> || IA || Initiator Agent - one block for each initiator on the interconnect. Cross-interconnect IAs usually start at offset 0x8000.
|-
| <code>0xEoo5xx00</code> || TA || Target Agent - one block for each target on the interconnect. Cross-interconnect TAs usually start at offset 0x8000.
|-
| <code>0xEoo6xx00</code> || PM || Protection Mechanism - used to filter access to specific targets. If present, register block at <code>0xEoo6xx00</code> protects TA <code>0xEoo5xx00</code>.
|-
| <code>0xEoo6C000</code> || Interconnect PM || Protection Mechanism ?for the interconnect's RT?
|-
| <code>0xEoo70000</code> || RT || Register Target - used to interact with the interconnect itself.
|}


Registers are always 64-bit, and register blocks are always 1KiB (0x400 bytes).
Note: <code>Cry/SBL Bus</code> does not follow this scheme.


=== Agent registers ===
=== Agent registers ===


Each agent (IA/TA) has an associated register block.
IA and TA register blocks share a similar layout.


(List of physical address for all these interfaces can be found on [[Physical Memory]] page - names start with <code>SSX_</code> - will be migrated here at some point)
(List of physical address for all these interfaces can be found on [[Physical Memory]] page - names start with <code>SSX_</code> - will be migrated here at some point)
Line 94: Line 185:
|}
|}


==== Register Target ====
=== Register Target ===


Each interconnect hosts a special TA called the '''R'''egister '''T'''arget (RT), used to access interconnect internal configuration registers. ?On SSX, the '''S'''ideband '''I'''nterconnect is also in this block?? or maybe the addresses are for SI and not RT??
Hosts configuration and status registers of the interconnect itself.


{| class="wikitable mw-collapsible mw-collapsed" style="text-align: center"
{| class="wikitable"
|+ RT registers location
|+ RT registers description
|-
|-
! Address !! Interconnect name !! u64 @ offset 0x18
! Name !! Offset !! Usage/Notes
|-
|-
| 0xEC000000 || Main Xbar || 0x1402010001001E00
| <code>COMPONENT</code> || 0x0 || See Agent registers
|-
| 0xEC100000 || Center Xbar || 0x1402010001001F00
|-
| 0xEC200000 || Video Xbar || 0x1402010001002100
|-
| 0xEC300000 || IFTU Xbar || 0x1402010001001300
|-
| 0xEC400000 || VIP Xbar || 0x1402010001001500
|-
| 0xEC500000 || Debug Bus || 0x1402010001001400
|-
| 0xEC600000 || DMAC Xbar || 0x1402010001000E00
|-
| 0xED000000 || IO Slave Bus || 0x1402010001000F00
|-
| 0xED100000 || IO Master Bus || 0x1402010001000C00
|-
| 0xED200000 || Pervasive Bus || 0x1402010001000F00
|-
| 0xED300000 || Misc IO Bus || 0x1402010001002400
|-
| 0xED400000 || North IO Master Bus || 0x1402010001001700
|-
| 0xED500000 || Audio Bus || 0x1402010001001E00
|-
| 0xED600000 || North IO Slave Bus || 0x1402010001001800
|-
| 0xED700000 || SRC Bus || 0x1402010001001200
|-
| 0xED800000 || GPU Register Bus || 0x1402010001001300
|-
| 0xED900000 || IFTU Register Bus || 0x1402010001001600
|-
| 0xEE000000 || Camera Slave Bus || 0x1402010001001300
|-
|-
| 0xEE100000 || Camera Master Bus || 0x1402010001001200
| <code>NETWORK</code> || 0x10 || Bits 63:48 (63:32?) hold the Unique Interconnect ID
|-
|-
| 0xEE200000 || USB Slave Bus || 0x1402010001001900
| <code>INITID_READBACK</code> || 0x70 || Bits <7:0> contain the Initiator ID of the reader
|-
| 0xEE300000 || USB Master Bus || 0x1402010001001900
|-
| 0xEE400000 || SubLCD Slave Bus || 0x1402010001001B00
|-
| 0xEE500000 || SubLCD Master Bus || 0x1402010001000D00
|-
| 0xEE600000 || Camera Register Bus || 0x1402010001001200
|-
|-
| <code>NETWORK_CONTROL</code> || 0x78 || Bits <10:8> contain TIMEOUT_BASE
|}
|}
Note: the initiator ID is an interconnect-level concept, and unrelated to the Bus Master ID. ?Every IA has its own IID?
=== Sideband Interconnect ===
Each interconnect hosts a register block called '''S'''ideband '''I'''nterconnect, used for error reporting.


{| class="wikitable"
{| class="wikitable"
|+ RT registers description
|+ SI registers description
|-
|-
! Name !! Offset !! Usage/Notes
! Name !! Offset !! Usage/Notes
|-
|-
| <code>COMPONENT</code> || 0x0 || See Agent registers
| <code>SI_FLAG_STATUS_0</code> || 0x110 || Sideband Interconnect error status 0
 
?what is ''component'' referring to?
|-
| <code>INITID_READBACK</code>? || 0x70 || Initiator ID of the reader is returned in bits [7:0]?
|-
| ?<code>SI_FLAG_STATUS_0</code>? || 0x110 || Sideband Interconnect error status 0
|-
|-
| ?<code>SI_FLAG_STATUS_1</code>? || 0x130 || Sideband Interconnect error status 1
| <code>SI_FLAG_STATUS_1</code> || 0x130 || Sideband Interconnect error status 1
|-
|-
| ?<code>SI_FLAG_STATUS_2</code>? || 0x150 || Sideband Interconnect error status 2
| <code>SI_FLAG_STATUS_2</code> || 0x150 || Sideband Interconnect error status 2
|-
|-
| ?<code>SI_FLAG_STATUS_3</code>? || 0x170 || Sideband Interconnect error status 3
| <code>SI_FLAG_STATUS_3</code> || 0x170 || Sideband Interconnect error status 3
|-
| ?<code>SI_FLAG_STATUS_4</code>? || 0x190 || Sideband Interconnect error status 4
|-
|-
| <code>SI_FLAG_STATUS_4</code> || 0x190 || Sideband Interconnect error status 4
|}
|}


=== SI registers ===
+ many registers not documented in OMAP35x TRM


Each interconnect hosts a register block called '''S'''ideband '''I'''nterconnect, used for error reporting.
=== Protection Mechanism ===
 
=== PM registers ===


Each Target Agent may be equipped with a Firewall (also called '''P'''rotection '''M'''echanism), which can be used to restrict or filter access to it based on various criteria.
Each Target Agent may be equipped with a Firewall (also called '''P'''rotection '''M'''echanism), which can be used to restrict or filter access to it based on various criteria.
Line 234: Line 281:
| <code>0x003F_0000</code> || master || Bus master
| <code>0x003F_0000</code> || master || Bus master
|-
|-
| <code>0x0000_0700</code> || cmd || Type of transfer requested
| <code>0x0000_0700</code> || cmd || MCmd signal
|-
|-
| <code>0x0000_0008</code> || Burst Access Error ||  
| <code>0x0000_0008</code> || Burst Access Error ||  
Line 242: Line 289:
| <code>0x0000_0001</code> || Address Hole Error || If set, the error occurred because the address was invalid.
| <code>0x0000_0001</code> || Address Hole Error || If set, the error occurred because the address was invalid.
|}
|}
Sometimes, this register is not present but separated in multiple (e.g., in REGBUS).


Note that for some devices (Spad32K, Spad128K, Compati SRAM), the only valid attribute is <code>0x1</code>, indicating an invalid address.
Note that for some devices (Spad32K, Spad128K, Compati SRAM), the only valid attribute is <code>0x1</code>, indicating an invalid address.
Line 247: Line 296:
To decode the meaning of <code>master</code> and <code>cmd</code>, shift them by 16 and 8 respectively to obtain a value between 0-63/0-7 and use the following tables:
To decode the meaning of <code>master</code> and <code>cmd</code>, shift them by 16 and 8 respectively to obtain a value between 0-63/0-7 and use the following tables:
{| class="wikitable mw-collapsible mw-collapsed"
{| class="wikitable mw-collapsible mw-collapsed"
|+ <code>cmd</code> decoding table
|+ <code>MCmd</code> table
|-
|-
! Value !! Command
! Value !! Command

Latest revision as of 22:06, 23 October 2024

This page documents Kermit memory system internals.

The OMAP35x Technical Reference Manual provides information about the SonicsMX® interconnect used in Kermit ES1. Datasheets for some Microchip PIC32 microcontrollers (e.g. PIC32MZ family) provide information about the SonicsSX® interconnect used in Kermit ES2+.

Glossary

  • SMX

Abbreviation of SonicsMX®.

  • SSX

Abbreviation of SonicsSX®.

  • Module

Any device connected to the memory system, such as ARM cores, DMA controllers, LPDDR2... Modules can be initiators, targets or both.

  • Initiator

A module that can initiate read and write requests to the interconnect (e.g. ARM cores, DMA, ...).

  • Target

A module that can only respond to requests from the interconnect. Targets may also be able to generate out-of-band signals such as interrupts.

  • Agent

The connection between a module's port and the interconnect. If a module has multiple ports (e.g. an Initiator and Target module), each port is connected to the interconnect by a different agent (e.g. one IA and one TA).

  • TA

Short for Target Agent. The agent connecting an Initiator module to the interconnect.

  • IA

Short for Initiator Agent. The agent connecting a Target module to the interconnect.

  • OCP

Open-core Protocol, a standard point-to-point protocol allowing communication between a master and a slave port.

  • OCP Master Port

A port that can generate OCP commands. Initiators always include at least one master port.

  • OCP Slave Port

A port that can respond to OCP commands. Targets always include one slave port.

  • Interconnect

Logic device enabling connection between initiator and target modules connected to it.

  • Out-of-band error

OCP signal associated to a device error-reporting scheme. This is opposed to an in-band error, which is associated to the protocol's error-reporting scheme. Out-of-band errors are also known as sideband errors.

Generalities

The bus fabric of Kermit is made of several SonicsSX® interconnects on which peripherals are connected.

All communication is done using the OCP protocol; however, adapters (e.g., AXI2OCP for Cortex-A9) may be present at Agent level.

There are three revisions of the memory system layout:

  • Original layout for Kermit1.0 ES1 - uses the SMX interconnect (as found in BeagleBoard SoC) instead of SSX
  • Second revision for Kermit1.0 ES2 - very close to the final revision, uses the SSX interconnect
  • Third and final revision for Kermit1.0 ES3 and later

In the following sections, you may see mentions of register names such as BEBT and SBEBT. Unless otherwise specified, a register prefixed with S is merely the ARM Secure variant of the register e.g. SBEBT is BEBT for ARM Secure. Everything that applies to a register should apply to its Secure variant, except that the register is updated by Secure bus transactions, instead of Non-Secure bus transactions.

Signals

MReqInfo

MReqInfo is 16 bits wide in Kermit.

Bits <6:0> contain the Bus Master ID of initiator. This is sometimes used for access checks, or to identify transaction initiator when a bus error occurs.

Interconnect registers

There are register blocks associated to each interconnect in the system. These blocks are always 1KiB (0x400 bytes), and the registers inside them are always 64-bit.

Location

Address Name UIID
0xEC000000 Main Xbar 0
0xEC100000 Center Xbar 1
0xEC200000 Video Xbar 2
0xEC300000 IFTU Xbar 3
0xEC400000 VIP Xbar 4
0xEC500000 Debug Bus 5
0xEC600000 DMAC Xbar 6
0xED000000 IO Slave Bus 8
0xED100000 IO Master Bus 9
0xED200000 Pervasive Bus 10
0xED300000 Misc IO Bus 11
0xED400000 North IO Master Bus 12
0xED500000 Audio Bus 13
0xED600000 North IO Slave Bus 14
0xED700000 SRC Bus 15
0xED800000 GPU Register Bus 16
0xED900000 IFTU Register Bus 17
0xEE000000 Camera Slave Bus 24
0xEE100000 Camera Master Bus 25
0xEE200000 USB Slave Bus 26
0xEE300000 USB Master Bus 27
0xEE400000 SubLCD Slave Bus 28
0xEE500000 SubLCD Master Bus 29
0xEE600000 Camera Register Bus 30
0xE00C0000 Cry/SBL Bus 48

The UIID column indicates the Unique Interconnect ID. Bit N of BEBT register indicates an error is pending on interconnect with UUID N.

Each interconnect register group is divided as follows:

Address mask Sub-block Description
0xEoo00000 ? ?Sideband Interconnect?
0xEoo1xx00 ? IA-related (Only present if IA exists at 0xEoo4xx00)
0xEoo30000 ? ?
0xEoo30400 ? ?
0xEoo3C000 ? ?
0xEoo4xx00 IA Initiator Agent - one block for each initiator on the interconnect. Cross-interconnect IAs usually start at offset 0x8000.
0xEoo5xx00 TA Target Agent - one block for each target on the interconnect. Cross-interconnect TAs usually start at offset 0x8000.
0xEoo6xx00 PM Protection Mechanism - used to filter access to specific targets. If present, register block at 0xEoo6xx00 protects TA 0xEoo5xx00.
0xEoo6C000 Interconnect PM Protection Mechanism ?for the interconnect's RT?
0xEoo70000 RT Register Target - used to interact with the interconnect itself.

Note: Cry/SBL Bus does not follow this scheme.

Agent registers

IA and TA register blocks share a similar layout.

(List of physical address for all these interfaces can be found on Physical Memory page - names start with SSX_ - will be migrated here at some point)

Agent registers description
Name Offset Usage/Notes
COMPONENT 0x0 Bits [31:16] contain component code (CODE)

Bits [15:0] contain component revision (REV)

?what is component referring to? SSX?

CORE 0x18 Bits [47:32] contain vendor code (VENDOR_CODE)

Bits [31:16] contain core code (CORE_CODE)

Bits [15:0] contain revision code (REV_CODE)

AGENT_CONTROL 0x20 ?
AGENT_STATUS 0x28 Bit 0x0100_0000 indicates an error
AGENT_ERROR_LOG 0x58
AGENT_ERROR_LOG_ADDR 0x60
? 0x100 Seen values: 1

Register Target

Hosts configuration and status registers of the interconnect itself.

RT registers description
Name Offset Usage/Notes
COMPONENT 0x0 See Agent registers
NETWORK 0x10 Bits 63:48 (63:32?) hold the Unique Interconnect ID
INITID_READBACK 0x70 Bits <7:0> contain the Initiator ID of the reader
NETWORK_CONTROL 0x78 Bits <10:8> contain TIMEOUT_BASE

Note: the initiator ID is an interconnect-level concept, and unrelated to the Bus Master ID. ?Every IA has its own IID?

Sideband Interconnect

Each interconnect hosts a register block called Sideband Interconnect, used for error reporting.

SI registers description
Name Offset Usage/Notes
SI_FLAG_STATUS_0 0x110 Sideband Interconnect error status 0
SI_FLAG_STATUS_1 0x130 Sideband Interconnect error status 1
SI_FLAG_STATUS_2 0x150 Sideband Interconnect error status 2
SI_FLAG_STATUS_3 0x170 Sideband Interconnect error status 3
SI_FLAG_STATUS_4 0x190 Sideband Interconnect error status 4

+ many registers not documented in OMAP35x TRM

Protection Mechanism

Each Target Agent may be equipped with a Firewall (also called Protection Mechanism), which can be used to restrict or filter access to it based on various criteria.

PM registers location
Base address Protected TA
0xEC060000? Spad_32KiB?
0xEC060400 LPDDR0 (Main LPDDR2 + Controller I/F)
0xEC160000? Compati_2MiB?
0xEC160400? DevNull?
0xEC260000? Spad_128KiB?
0xEC560000? SDIO0?
0xEC560400? SDIO1?
0xEC560800? LPDDR1? (TOOL LPDDR2 + Controller I/F)

Bus Errors

When a bus error occurs, an interrupt is delivered to ARM Secure (Interrupt ID 0x21=33) or Non-Secure (Interrupt ID 0x20=32). The OS considers all bus errors to be fatal. The interrupt handlers installed for these IDs perform a register dump then stop the system.

It appears that device-initiated bus errors (e.g. DMAC) are always routed to Non-Secure interrupt. There may be other rules to consider (e.g. some register to set whether a device is Secure/Non-Secure).

It is unknown whether or not CMeP can receive bus error interrupts or how CMeP fits in the memory system.

There are two kind of bus errors: Internal Bus error and Target Device error. An Internal Bus error occurs when the memory system fails to deliver a request to a target device - for example, trying to access non-existent memory. A Target Device error occurs when a device successfully receives a request but is unable to handle it - for example, accessing the non-existent part of a device's memory.

Bus Error Attribute

The bus error attribute is a 32-bit value that can be recovered in a per-device MMIO register along with the bus error address.

The attribute holds multiple informations: which agent was the bus master when the error occurred, what bus command was ongoing, and, when available, the reason of the bus error.

Bus error attribute meaning
Bitmask Name Notes
0xFF80_0000 MReqInfo<15:7> Bits <15:7> of MReqInfo signal
0x003F_0000 master Bus master
0x0000_0700 cmd MCmd signal
0x0000_0008 Burst Access Error
0x0000_0004 Register Permission Error
0x0000_0001 Address Hole Error If set, the error occurred because the address was invalid.

Sometimes, this register is not present but separated in multiple (e.g., in REGBUS).

Note that for some devices (Spad32K, Spad128K, Compati SRAM), the only valid attribute is 0x1, indicating an invalid address.

To decode the meaning of master and cmd, shift them by 16 and 8 respectively to obtain a value between 0-63/0-7 and use the following tables:

MCmd table
Value Command
0 Idle
1 Write
2 Read
3 ReadEx
4 ReadLinked
5 WriteNonPost
6 WriteConditional
7 Broadcast
Bus Master IDs (master decoding table)
Value Command
0 Reserved
1 ARM Core0
2 ARM Core1
3 ARM Core2
4 ARM Core3
5 ARM L2
6 Reserved
7 Reserved
8 Reserved
9 Reserved
10 Reserved
11 Reserved
12 Reserved
13 Reserved
14 Reserved
15 Reserved
16 DMAC0
17 DMAC1
18 DMAC2
19 DMAC3
20 DMAC4
21 DMAC5
22 Reserved (Bigmac?)
23 GPU
24 Venezia
25 VIP vdpd
26 VIP vdpm
27 VIP bap
28 Reserved
29 IFTU0a
30 IFTU0b
31 IFTU1a
32 IFTU1b
33 IFTU2
34 Reserved (Compati port0 in ES1 SceKernelBusError)
35 Reserved (Compati port0 in ES1 SceKernelBusError)
36 USB1 Host EHCI
37 USB1 Host OCHI
38 Reserved (CMeP?)
39 Sensor in 0
40 Sensor in 1
41 Reserved (Sensor in 2 in ES1 SceKernelBusError)
42 LCD DMAC
43 Performance Monitor
44 USB2 Device DMAC
45 Sub LCD
46 DMAC6
47 USB0 Host EHCI
48 USB0 Host OHCI
49 USB2 Host EHCI
50 USB2 Host OHCI
51 USB0 Device DMAC
52 Reserved (USB1 Device DMAC1 in ES1/ES2)
53 Reserved (USB1 Device DMAC2 in ES1/ES2)
54 Reserved (USB1 Device DMAC3 in ES1/ES2)
55 USB1 Device DMAC
56 Reserved (USB2 Device DMAC1 in ES1/ES2)
57 Reserved (USB2 Device DMAC2 in ES1/ES2)
58 Reserved (USB2 Device DMAC3 in ES1/ES2)
59 SD/HSMMC0
60 SD/HSMMC1
61 SD/HSMMC2
62 SD/HSMMC3
63 Memory Stick

Clear TA error

In old System Software versions (e.g. 0.920 - pre-ES3, so this may no longer be valid), there exists inside the bus error module a function named BusErrorClearTA which works the following way.

First, choose a bus/XBar that will serve as start point (MainXBar for ES2). Second, recursively build a list of all TAs connected to this start point. Repeat the process for all TAs that are busses or XBars. Third, walk the obtained tree. Check the STATUS of all TAs. If an error is present, repeat the procedure recursively (if bus/XBar) then clear the error.

To detect an error, check if bit 0x01000_0000ull is present in STATUS To clear the error, simply write 0x01000_0000ull to STATUS.

NOTE: old System Software versions do not have informations about IAs, but only TAs. This could explain the routine's name, but also means this procedure may also work/be needed on IA side.

Miscellaneous

The memory system is able to distinguish if a transaction is originating from ARM Secure state or Non-Secure state because ARM Cortex-A9 processors with Security Extensions have a bit indicating whether the access is Secure or Non-Secure added to all memory system transactions.

Attempting to perform a DMAC memcpy() from Secure to Non-Secure LPDDR0 region results in a NS bus error. The current hypothesis is that all devices on the Kermit bus diagram that have an IA are treated as ARM NS.

Retrieved from "http://wiki.henkaku.xyz/index.php?title=Memory_System&oldid=21410"