Game Card: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
(Created page with "Game card is a standard MMC card. Pinout is different, however it complies with MMC card.")
 
No edit summary
Line 1: Line 1:
Game card is a standard MMC card. Pinout is different, however it complies with MMC card.
Game card is a standard MMC card. Pinout is different, however it complies with MMC card.
[[File:Gamecard_pinout.png]]
== Card initialization ==
Card initialization consists of two steps:
*Standard MMC initialization.
*Custom CMD56 initialization.
CMD56 is a command that is used to transfer vendor specific data from host to card and back to host.
Second step is crucial and is required to be done before host tries to read any data from the card for example with CMD17.
== Standard MMC initialization ==
This step is performed by SceSdif.
Part1: Card identification (SD, MMC, SDIO)
* 40 00 00 00 00 95 - CMD0 - GO_IDLE_STATE
* 48 00 00 01 AA 87 - CMD8 - SEND_IF_COND
* 45 00 00 00 00 5B - CMD5 - IO_SEND_OP_COND
* 77 00 00 00 00 65 - CMD55 - APP_CMD
Part2: Card initialization
* 40 00 00 00 00 95 - CMD0 - GO_IDLE_STATE
* 41 40 FF 80 00 0B - CMD1 - SEND_OP_COND
* 42 00 00 00 00 4D - CMD2 - ALL_SEND_CID
* 43 00 01 00 00 7F - CMD3 - SET_RELATIVE_ADDR
* 49 00 01 00 00 F1 - CMD9 - SEND_CSD
* 47 00 01 00 00 DD - CMD7 - SELECT_CARD
* 46 03 AF 01 00 43 - CMD6 - SWITCH (ERASE_GROUP_DEF)
* 48 00 00 00 00 C3 - CMD8 - SEND_EXT_CSD
* 50 00 00 02 00 15 - CMD16 - SET_BLOCKLEN
* 46 03 B9 01 00 2F - CMD6 - SWITCH (HS_TIMING)
* 46 03 B7 01 00 2D - CMD6 - SWITCH (BUS_WIDTH 4)
== Custom CMD56 initialization ==
This step is performed by SceSblGcAuthMgr.
Initialization consists of 20 packets total.
There are 10 request and 10 response packets.
Each packet is sent or received with CMD56.

Revision as of 18:53, 21 January 2017

Game card is a standard MMC card. Pinout is different, however it complies with MMC card.

Gamecard pinout.png


Card initialization

Card initialization consists of two steps:

  • Standard MMC initialization.
  • Custom CMD56 initialization.

CMD56 is a command that is used to transfer vendor specific data from host to card and back to host. Second step is crucial and is required to be done before host tries to read any data from the card for example with CMD17.

Standard MMC initialization

This step is performed by SceSdif.

Part1: Card identification (SD, MMC, SDIO)

  • 40 00 00 00 00 95 - CMD0 - GO_IDLE_STATE
  • 48 00 00 01 AA 87 - CMD8 - SEND_IF_COND
  • 45 00 00 00 00 5B - CMD5 - IO_SEND_OP_COND
  • 77 00 00 00 00 65 - CMD55 - APP_CMD

Part2: Card initialization

  • 40 00 00 00 00 95 - CMD0 - GO_IDLE_STATE
  • 41 40 FF 80 00 0B - CMD1 - SEND_OP_COND
  • 42 00 00 00 00 4D - CMD2 - ALL_SEND_CID
  • 43 00 01 00 00 7F - CMD3 - SET_RELATIVE_ADDR
  • 49 00 01 00 00 F1 - CMD9 - SEND_CSD
  • 47 00 01 00 00 DD - CMD7 - SELECT_CARD
  • 46 03 AF 01 00 43 - CMD6 - SWITCH (ERASE_GROUP_DEF)
  • 48 00 00 00 00 C3 - CMD8 - SEND_EXT_CSD
  • 50 00 00 02 00 15 - CMD16 - SET_BLOCKLEN
  • 46 03 B9 01 00 2F - CMD6 - SWITCH (HS_TIMING)
  • 46 03 B7 01 00 2D - CMD6 - SWITCH (BUS_WIDTH 4)

Custom CMD56 initialization

This step is performed by SceSblGcAuthMgr.

Initialization consists of 20 packets total. There are 10 request and 10 response packets. Each packet is sent or received with CMD56.