DSI Registers: Difference between revisions
Jump to navigation
Jump to search
| Line 29: | Line 29: | ||
| 0x014 | | 0x014 | ||
| 4 | | 4 | ||
| bits[31:16]: <code>((HSW + HBP) * clocks_per_pixel) >> 1</code>, bits[15:0]: <code>(( | | bits[31:16]: <code>((HSW + HBP) * clocks_per_pixel) >> 1</code>, bits[15:0]: <code>(((HSW + HBP + hact) * clocks_per_pixel) >> 1) + 1</code> | ||
|- | |- | ||
| 0x030 | | 0x030 | ||
Revision as of 19:00, 9 February 2018
MMIO Interfaces
| Name | Physical address |
|---|---|
| SceDsi0Reg | 0xE5050000 |
| SceDsi1Reg | 0xE5060000 |
Registers
| Offset | Size | Description |
|---|---|---|
| 0x004 | 4 | bits[1:0]: Video mode (0 = Progressive, 0b11 = Interlaced) |
| 0x00C | 4 | bits[28:16]: vtotal, bits[12:0]: (vtotal + 1) >> 1
|
| 0x014 | 4 | bits[31:16]: ((HSW + HBP) * clocks_per_pixel) >> 1, bits[15:0]: (((HSW + HBP + hact) * clocks_per_pixel) >> 1) + 1
|
| 0x030 | 4 | bits[31:16] = VSW
|
| 0x050 | 4 | Interrupts ack/clear (read = triggered interrupts, write = clear interrupt) |
| 0x054 | 4 | Interrupt enable mask (bit 1 = some interrupt) |
| 0x410 | 4 | DSI Command read FIFO status (bit 5 = Read FIFO empty) |
| 0x430 | 4 | DSI Command read FIFO |
| 0x500 | 4 | DSI Command FIFO |
| 0x510 | 4 | Another command FIFO (used to write the packet for command reads) |
| 0x838 | 4 | DSI auto clock configuration (1 = only HS clock, 0 = auto gate when data in LP) |