Boot Sequence: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
Tags: mobile edit mobile web edit
Tags: mobile edit mobile web edit
Line 11: Line 11:


=== Secure Kernel ===
=== Secure Kernel ===
The bootloader decompressed the [[ARZL]] secure kernel, loads it and sets up the VBAR and MVBAR. It then decompresses the [[ARZL]] non-secure bootloader and sets NS in SCR and jumps into non-secure bootloader. See [[Secure Bootloader]] for more information.
The bootloader decompresses the [[ARZL]] secure kernel, loads it and sets up the VBAR and MVBAR. It then decompresses the [[ARZL]] non-secure bootloader and sets NS in SCR and jumps into non-secure bootloader. See [[Secure Bootloader]] for more information.


=== SceKblForKernel ===
=== SceKblForKernel ===

Revision as of 22:15, 13 August 2018

The Vita main application processor is a Cortex A9 MPcore. It implements ARM TrustZone for execution in both a non-secure world and a sandboxed Secure World.

Boot Process

Boot ROM

It is likely that the F00D processor (MeP Core) is the actual secure boot device rather than the ARM CPU. The F00D processor likely is Toshiba MEP based and is the first secure device ("first loader") to start on the Vita. Once it starts it likely maps the eMMC and directly reads in the second_loader.enp or second_loader.enp_ from the eMMC. This is in the native load format of the F00D bootrom. There are likely 2 layers of encryption. First it decrypts the per-console layer that was added during the install. After that it will decrypt the factory-encrypted layer then begin execution.

The second_loader is primarily responsible for preparing the ARM processor. It initializes DRAM and decrypts slb2 kernel_boot_loader.self into DRAM. It also writes the ARM exception vector and some boot context information to the 32KB scratch buffer (mirror mapped to 0x00000000 on ARM). The kernel_boot_loader.self contains both the secure world bootloader and kernel, as well as the non-secure boot loader. At this point the kprx_auth_sm.self and prog_rvk.srvk are both loaded into DRAM.

Finally, the second_loader resets itself with a pointer to the secure_kernel.enp or enp_. F00D processor then restarts and loads the secure_kernel.enp in and again decrypts the per-console layer that was added by the install, and the factory layer. At this point the F00D processor secure kernel is prepared and it resets the ARM CPU at 0x00000000 (F00D scratch buffer). This triggers the ARM secure boot process to begin.

Secure Kernel

The bootloader decompresses the ARZL secure kernel, loads it and sets up the VBAR and MVBAR. It then decompresses the ARZL non-secure bootloader and sets NS in SCR and jumps into non-secure bootloader. See Secure Bootloader for more information.

SceKblForKernel

The non-secure bootloader contains an embedded and likely stripped version of SceSysmem, SceKernelModulemgr, SceSblSmschedProxy, and some core drivers. The non-secure bootloader sets up the eMMC device (again) and loads os0:psp2bootconfig.skprx.

ScePsp2BootConfig

This kernel module does not export any libraries. It only has a module init function that has a hard coded list of core kernel modules (ex: sysmem.skprx) which are loaded with calls back into SceKblForKernel. Once the core initialization is done, the next module to run is SceSysStateMgr.

SceSysStateMgr

This kernel module also does not export any libraries. Its init function first loads all the bootfs modules. Then it decrypts os0:psp2config_vita.skprx or os0:psp2config_dolce.skprx and parses the System Configuration Script to load the remaining modules and finally either SceSafemode or SceShell or ScePsp2Swu or ScePsp2Diag.

Boot Partition

The boot partition is SLB2 formatted. It contains entries these files:

Name Earliest Known Version Comments
kernel_boot_loader.self 1.05 This could be the non-secure bootloader SceKblForKernel
kprx_auth_sm.self 1.05 Used by F00D Processor to decrypt SELFs
prog_rvk.srvk 1.05 SCE encrypted revocation data of some sort.
second_loader.enp 1.05 Possibly the secure bootloader
second_loader.enp_ 1.69 Related to second_loader.enp in some way, likely for encryption
secure_kernel.enp 1.05 Possibly the secure kernel ARZL compressed and loaded into memory by ROM.
secure_kernel.enp_ 1.05 Related to secure_kernel.enp in some way, likely for encryption

System Configuration Script

os0:psp2config.skprx once decrypted is a UTF-8 text file that is parsed by SceSysStateMgr. It is a very simple script format.

If "manufacturing mode" is enabled, then it is possible to load psp2config.skprx from sd0: (not present in any production device or devkits) or ux0:. However, the files must still be signed and encrypted SELFs. In "manufacturing mode" with the default boot config, if sd0:psp2diag.self or ux0:psp2diag.self exists (and are valid signed & encrypted SELFs), then it will be launched. If "development mode" is enabled (note that this does not necessarily mean PDEL or devkit), then psp2config.skprx can be a plaintext file instead.

Comments

Comments start out with #, as an example, here's the header of 1.69 psp2config.skprx

#
# PSP2 System Configuration for Release
#
# [NOTICE]
# 
# This configuration is only for kernel_boot_loader_release.self.
#

Conditionals

Conditionals start with if and end with endif. There are certain conditional constants defined in SceSysStateMgr. A table of known conditionals is below.

Name Description
MANUFACTURING_MODE Unknown. Depends on some condition set on boot by some bootloader
EXTERNAL_BOOT_MODE Unknown. Depends on some condition set on boot by some bootloader
UPDATE_MODE Set by SceSyscon when an update is about to be performed.
USB_ENUM_WAKEUP Unknown. Could be CMA connection while device is turned off.
KERMIT_REV_ES1_X Unknown. Hardware revision related.
KERMIT_REV_ES2_X Unknown. Hardware revision related.
KERMIT_REV_ES3_X Unknown. Hardware revision related.
KERMIT_REV_ES4_X Unknown. Hardware revision related.
UD0_EXIST Does the ud0: Partition exist?
DEMO_MODE Is the Vita a IDU flagged?
SAFE_MODE Some flag from boot indicates device should enter safe mode.
DEVELOPMENT_MODE SceSblACMgr is called to check if device is a development device.

Example:

if SAFE_MODE
spawn	os0:ue/safemode.self
end
endif

Load

load path will load the kernel module at path.

tload path possibly stands for "test load." Possibly used in development units to load to module to dedicated devkit RAM.

Example:

load	os0:kd/ngs.skprx

Spawn

spawn path will spawn an app and continue processing the script in the background.

spawnwait path will spawn an app and wait for it to exit before continuing processing the script.

appspawn path param is used to spawn vs0:vsh/shell/shell.self. Specify a paramater to pass.


Known param constants:

Name Description
SHELL_BUDGET_ID Unknown.

Example:

if UPDATE_MODE
if UD0_EXIST
spawn ud0:PSP2UPDATE/psp2swu.self
else
spawn ur0:PSP2UPDATE/psp2swu.self
endif
end
endif

Include

include path will include and process a config script located at path.

Example:

include	ur0:temp/bcfg2.txt

End

end will end script processing

Ignore Error

Any line that starts with - will not fail the boot sequence if the line fails. For example, you can specify an optional module to load such that boot continues if the module does not exist or errors on load.

Boot Debug Checkpoint Codes

During the boot sequence, the various bootloaders will update a GPIO register specifying the progress into boot. This can be used to debug where in the boot process something fails.

GPIO

The GPIO registers are registered at 0xE20A000C (turn off bits) and 0xE20A0008 (turn on bits). On PDEL units, this maps to the LED lights.

Known Codes

Code Location Description
72 ? ?
84 ? ?
85 ? ?
86 ? ?
96 ? ?
129 Secure Kernel Loader Core 0 (secure world) pre-init complete
130 Secure Kernel Loader Secure world interrupts registered (?)
131 Secure Kernel Loader Serial console ready, boot message printed
132 Secure Kernel Loader Some device init
133 Secure Kernel Loader Some co-processor init. Starting point for other cores.
134 Secure Kernel Loader MMU enabled, VBAR/MVBAR set up
135 Secure Kernel Loader Nothing since 134
136 Secure Kernel Loader Boot setup complete, secure kernel loading begin
137 Secure Kernel Loader Secure kernel loaded. About to load NS KBL at 0x51000000
138 Secure Kernel Loader Secure kernel loaded. About to resume context at 0x1F000000. Or undefined instruction exception.
139 Secure Kernel Loader SVC exception (should not happen, error)
140 Secure Kernel Loader Prefetch abort exception
141 Secure Kernel Loader Data abort exception
142 Secure Kernel Loader IRQ exception (should not happen, error)
143 Secure Kernel Loader FIQ exception (should not happen, error)
161 NS Kernel Loader Core 0 (non-secure world) pre-init complete
162 NS Kernel Loader Some interrupts registered (?)
163 NS Kernel Loader Serial console ready, boot message printed (if enabled)
164 NS Kernel Loader Some buffer is initialized to device addresses
165 NS Kernel Loader Some co-processor init. Starting point for other cores.
166 NS Kernel Loader MMU enabled, VBAR set up
167 NS Kernel Loader Nothing since 166
168 NS Kernel Loader Boot setup complete, NS kernel loading begin
169 NS Kernel Loader Kernel pre-init (setup stacks, interrupts, etc) done. Right before first external loading.
170 NS Kernel Loader Undefined instruction exception
171 NS Kernel Loader SVC exception (should not happen, error)
172 NS Kernel Loader Prefetch abort exception
173 NS Kernel Loader Data abort exception
174 NS Kernel Loader IRQ exception (should not happen, error)
175 NS Kernel Loader FIQ exception (should not happen, error)

Suspend and Resume

Upon suspension, context is written to memory and a syscon command is issued to save the context pointer as well as other information (for example, if it should restart into update mode). When resuming, the boot process is the same as cold boot up until the secure kernel loader. After secure kernel loads, instead of decompressing and jumping to the non-secure kernel loader, it restores the saved context and returns to the kernel resume code.