SceSysmem is a kernel module that acts as the heart of the kernel. It exports multiple libraries for different functionalities (one of the few modules that do so). SceSysmem is the first module that is loaded in the kernel load sequence and its libraries are imported by almost all other modules. See Memory for more details on the memory subsystem.
Module
This module exists in both non-secure and secure world. The non-secure world SELF can be found in os0:kd/sysmem.skprx. It also can be found in the Boot Image.
Known NIDs
| Version |
Name |
World |
Privilege |
NID
|
| 1.69 |
SceSysmem |
Non-secure |
Kernel |
0xB93950C6
|
| 3.60 |
SceSysmem |
? |
Kernel |
0x3380B323
|
| 3.61 |
SceSysmem |
Non-secure |
Kernel |
0x3380B323
|
| 1.69 |
SceSysmem |
Secure |
Kernel |
0x502BE0E5
|
Libraries
This module only exports kernel libraries.
Known NIDs
Memory Block Type
The type parameter indicates what kind of memory to allocate. Here is a mapping of type flags to ARM MMU flags. Higher bits are used for other options including where to allocate from. Not all flag values are valid, there is a table of valid types in the kernel. You cannot, for example, allocate RWX memory.
| Mask |
Value |
Description
|
| 0x10000 |
0x10000 |
Global. nG bit NOT set
|
| 0xFF00 |
0x800 |
B bit set. Sharable device memory.
|
| 0xFF00 |
0x2000 |
TEX[2] and TEX[0] bit set. Outer cache Write-back, Write-Allocate. Inner cache non-cachable.
|
| 0xFF00 |
0x4000 |
TEX[2] and B bit set. Outer cache non-cachable. Inner cache Write-back, Write-Allocate
|
| 0xFF00 |
0x8000 |
TEX[0] bit set. S bit unset. Outer and inner non-cachable. Not sharable.
|
| 0xFF00 |
0xD000 |
TEX[0] bit set. C,B bits set. Outer and inner Write-back, Write-Allocate.
|
| 0xFF |
0x4 |
AP[2:0] = 5, XN=1. Privileged RO, User NA.
|
| 0xFF |
0x5 |
AP[2:0] = 5. Privileged RX, User NA.
|
| 0xFF |
0x6 |
AP[2:0] = 1, XN=1. Privileged RW, User NA.
|
| 0xFF |
0x7 |
AP[2:0] = 1. Privileged RWX, User NA. (Never used)
|
| 0xFF |
0x50 |
AP[2:0] = 7. Privileged RX, User RX.
|
| 0xFF |
0x60 |
AP[2:0] = 3, XN=1. Privileged RW, User RW.
|
| 0xFF |
0x40 |
AP[2:0] = 7, XN=1. Privileged RO, User RO.
|
| Mask |
Value |
Name
|
| 0x0F000000 |
0x09000000 |
SceKernelUserCdram
|
| 0x0F000000 |
0x0A000000 |
SceKernelUserShared
|
| 0x0F000000 |
0x0B000000 |
SceKernelUserIO
|
| 0x0F000000 |
0x0C000000 |
SceKernelUserMain
|
| 0x0F000000 |
0x0D000000 |
SceKernelUserUncache
|
| 0x0F000000 |
0x0E000000 |
SceKernelUserCDialog
|
| 0x0F000000 |
0x0F000000 |
SceKernelUserCDialogNC
|
SceSysmemForKernel
sceKernelAllocMemBlockForKernel
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0xC94850C9
|
| 1.69
|
secure
|
0x402EB970
|
typedef enum SceKernelAllocMemBlockAttr {
SCE_KERNEL_ALLOC_MEMBLOCK_ATTR_HAS_PADDR = 0x00000002U,
SCE_KERNEL_ALLOC_MEMBLOCK_ATTR_HAS_ALIGNMENT = 0x00000004U,
SCE_KERNEL_ALLOC_MEMBLOCK_ATTR_HAS_MIRROR_BLOCKID = 0x00000040U,
SCE_KERNEL_ALLOC_MEMBLOCK_ATTR_HAS_PID = 0x00000080U,
SCE_KERNEL_ALLOC_MEMBLOCK_ATTR_HAS_PADDR_LIST = 0x00001000U
} SceKernelAllocMemBlockAttr;
struct SceKernelAllocMemKernelBlockOpt_old {
uint32_t size; // 0x34
uint32_t unk;
uint32_t attr;
uint32_t unk2;
uint32_t paddr;
uint32_t align;
uint32_t unk3[3];
uint32_t processid;
uint32_t unk4[3];
};
// specific to 3.60
typedef struct SceKernelAllocMemBlockKernelOpt {
SceSize size; //!< sizeof(SceKernelAllocMemBlockKernelOpt)
SceUInt32 field_4;
SceUInt32 attr; //!< OR of SceKernelAllocMemBlockAttr
SceUInt32 field_C;
SceUInt32 paddr;
SceSize alignment;
SceUInt32 field_18;
SceUInt32 field_1C;
SceUInt32 mirror_blockid;
SceUID pid;
SceKernelPaddrList *paddr_list;
SceUInt32 field_2C;
SceUInt32 field_30;
SceUInt32 field_34;
SceUInt32 field_38;
SceUInt32 field_3C;
SceUInt32 field_40;
SceUInt32 field_44;
SceUInt32 field_48;
SceUInt32 field_4C;
SceUInt32 field_50;
SceUInt32 field_54;
} SceKernelAllocMemBlockKernelOpt;
int sceKernelAllocMemBlockForKernel(const char *name, int32_t type, uint32_t vsize, struct SceKernelAllocMemKernelBlockOpt *pOpt);
The interface is the same as the user version of this call, however more types can be specified and more options are in the pOpt argument.
To allocate a kernel RW block of memory, specify type = 0x6020D006.
To allocate a block of memory with a specific physical address, specify type = 0x20100206 or type = 0x20100806, pOpt->attr = 2, and pOpt->paddr = physical address.
To allocate a block of memory that is kernel executable, specify type = 0x1020D005.
To allocate a block of memory that is physically contiguous, specify type = 0x30808006, pOpt->attr = 0x200004 and an alignment to pOpt->alignment.
To allocate a block of memory inside the CDRAM, specify type = 0x40404006.
pOpt->attr bitmask
| Bitmask
|
Uses
|
| 0x00000001
|
field_C
|
| 0x00000002
|
paddr
|
| 0x00000004
|
alignment
|
| 0x00000008
|
field_18
|
| 0x00000010
|
field_1C
|
| 0x00000020
|
??
|
| 0x00000040
|
mirror_blockid
|
| 0x00000080
|
pid
|
| 0x00001000
|
paddr_list
|
| 0x00002000
|
field_2C
|
| 0x00010000
|
field_30
|
Unrestricted Write for Process
Unrestricted memcpy to the virtual address space for process pid. Both dst and src must be in the address space of pid but src must also be accessible in the address space of the caller. This is normally used for resolving stubs in module loads.
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x30931572
|
int unrestricted_memcpy_for_pid(int pid, void *dst, void *src, size_t len);
sceKernelFindClassByNameForKernel
| Version
|
World
|
NID
|
| 3.60
|
Non-secure
|
0x62989905
|
int sceKernelFindClassByNameForKernel(const char name, SceClass **class);
SceSysmemForDriver
sceKernelMemcpyKernelToUser
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x6D88EF8A
|
int sceKernelMemcpyKernelToUser(uint32_t uaddr, const void *kaddr, uint32_t len);
sceKernelMemcpyUserToKernel
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0xBC996A7A
|
int sceKernelMemcpyUserToKernel(void *kaddr, uint32_t uaddr, uint32_t len);
sceKernelMemcpyUserToKernelForPid
| Version
|
World
|
NID
|
| 3.60
|
non-secure
|
0x605275F8
|
int sceKernelMemcpyUserToKernelForPid(int pid, void *kaddr, uint32_t uaddr, uint32_t len);
Same as above, but copies from the specified process.
strncpyKernelToUser
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x80BD6FEB
|
int strncpyKernelToUser(uint32_t uaddr, const void *kaddr, uint32_t maxlen);
strncpyUserToKernel
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0xDB3EC244
|
int strncpyUserToKernel(void *kaddr, uint32_t uaddr, uint32_t maxlen);
strnlenUserSrc
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0xB429D419
|
int strnlenUserSrc(uint32_t uaddr, uint32_t maxlen);
get_paddr
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x8D160E65
|
| 3.60
|
?
|
0x8D160E65
|
| 1.69
|
secure
|
0x1DEADF6C
|
int get_paddr(void *vaddr, void **result);
This will write the physical address for a virtual address vaddr to memory pointed to by result. Returns <0 on error, values >=0 indicate success.
sceKernelGetPaddrList
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0xE68BEEBD
|
typedef struct SceKernelAddrPair {
uint32_t addr;
uint32_t length;
} SceKernelAddrPair;
typedef struct SceKernelPaddrListReq {
uint32_t size; // 0x14
uint32_t output_buffer_size;
uint32_t unk;
uint32_t ret_count;
SceKernelAddrPair *output_buffer;
} SceKernelPaddrListReq;
input.addr = vaddr;
input.length = length;
int sceKernelGetPaddrList(SceKernelAddrPair *input, SceKernelPaddrListReq *req);
This function takes in two parameters: an array of length 2 specifying the virtual address and the size of the block of memory and a request information. The function will write into output_buffer an array of addr_pair that encompasses the block of memory specified in the input. req->ret_count will contain the number of entries written. If output_buffer is null, it will just write the count.
sceKernelGetMemBlockBaseForDriver
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0xA841EDDA
|
int sceKernelGetMemBlockBaseForDriver(int blkid, void **base);
sceKernelFindMemBlockByAddrForDriver
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x8A1742F6
|
int sceKernelFindMemBlockByAddrForDriver(void *base, int);
Remap Block
| Version
|
World
|
NID
|
| 1.05
|
non-secure
|
0x8d332ae1
|
| 1.69
|
non-secure
|
0xDFE2C8CB
|
int sysmem_remap(int blkid, int type);
This is used to remap RW memory as RX. To do this, first allocate a memory block of type 0x1020D006. After you are done writing, call this with type set to 0x1020D005.
Create Heap Pool
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x9328E0E8
|
typedef struct {
int size; // 28
int flags; // usually 0x1
int unk;
int unk;
int block_type;
int unk;
int unk;
} pool_arg_t;
int heap_pool_create(const char *name, int size, pool_arg_t *opt); // opt can be NULL
The heap pool is thread safe.
Destroy Heap Pool
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0xD6437637
|
int heap_pool_destroy(int pool_uid);
sceKernelAllocHeapMemoryForKernel
| Version |
World |
NID
|
| 1.69 |
non-secure |
0x7B4CB60A
|
| 3.60 |
? |
0x7B4CB60A
|
void* sceKernelAllocHeapMemoryForKernel(SceUID uid, SceSize size);
sceKernelAllocHeapMemory2ForKernel
| Version |
World |
NID
|
| 3.60 |
? |
0xB415B5A8
|
same as sceKernelAllocHeapMemoryForKernel but does not set unk2 to 0
void* sceKernelAllocHeapMemory2ForKernel(SceUID uid, SceSize size, void* unk2);
sceKernelAllocHeapMemory3ForKernel
| Version |
World |
NID
|
| 3.60 |
? |
0x49D4DD9B
|
same as sceKernelAllocHeapMemoryForKernel but does not set unk2 to 0
void* sceKernelAllocHeapMemory3ForKernel(SceUID uid, SceSize size, void* unk2);
sceKernelAllocHeapMemoryFromGlobal1ForKernel
| Version |
World |
NID
|
| 3.60 |
? |
0x7750CEA7
|
same as sceKernelAllocHeapMemoryForKernel but uses global uid
void* sceKernelAllocHeapMemoryFromGlobal1ForKernel(SceSize size);
sceKernelAllocHeapMemoryFromGlobal2ForKernel
| Version |
World |
NID
|
| 3.60 |
? |
0x0B4ED16A
|
same as sceKernelAllocHeapMemoryForKernel but does not set unk2 to 0 and uses global uid
void* sceKernelAllocHeapMemoryFromGlobal2ForKernel(SceSize size, void *unk);
Free from Heap Pool
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x3EBCE343
|
int heap_pool_free(int pool_uid, void *ptr);
Map User to Kernel
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x7D4F8B5F
|
| 3.60
|
?
|
0x7D4F8B5F
|
Permission is either "1" for read only, no execute or "2"/"3" for read write, no execute. Type is either 0, 1, or 17 and affects the block type. 0 is default. This will allocate kernel memory starting at kernel_page. To get the same memory as the user pointer, add the kernel_offset. kernel_size is how much is allocated.
//this signature is for 1.69
int map_user_to_kernel(int permission, int type, void *user_buf, int size, void **kernel_page, int *kernel_size, int *kernel_offset);
//this signature is for 3.60 - now allows to give a name
int map_user_to_kernel(char *name, int permission, int type, void *user_buf, int size, void **kernel_page, int *kernel_size, int *kernel_offset);
Map User to Kernel Default
| Version
|
World
|
NID
|
| 3.60
|
?
|
0x278BC201
|
assigns type 0
int map_user_to_kernel_default(char *name, int permission, void *user_buf, int size, void **kernel_page, int *kernel_size, int *kernel_offset);
Map User to Kernel Default 2
| Version
|
World
|
NID
|
| 3.60
|
?
|
0x0091D74D
|
assigns type 0
int map_user_to_kernel_default_2(int unk0, char *name, int permission, void *user_buf, int size, void **kernel_page, int *kernel_size, int *kernel_offset);
Switch TTB to PID
Changes the TTBR to point to the tables for a given PID.
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x6F2ACDAE
|
| 3.60
|
non-secure
|
N/A
|
int switch_ttb(int pid);
Write to RO for PID
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x571D2739
|
int write_to_ro(int pid, void *dst, const void *src, int size);
Write to RX for PID
Same as write to RO but does a cache flush.
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x30931572
|
int write_to_rx(int pid, void *dst, const void *src, int size);
Find Int for PID
Looks for an integer in user space.
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x8334454F
|
int find_int(int pid, void *haystack, int needle, int size);
strnlen for PID
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x9929EB07
|
int user_strnlen(int pid, char *ptr, int size);
strncpy for PID
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x75AAF178
|
int user_strncpy(int pid, char *dst, const char *kern_src, int size);
memcpyk2u unchecked for PID
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0xFED82F2D
|
int user_memcpyk2u(int pid, void *dst, const void *kern_src, int size);
memcpyk2u checked for PID
This will not crash on invalid user pointers, but instead return error.
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x6B825479
|
int user_safe_memcpyk2u(int pid, void *dst, const void *kern_src, int size);
memcpyu2u for PID
| Version
|
World
|
NID
|
| 1.69
|
non-secure
|
0x8E086C33
|
int user_memcpyu2u(int pid, void *dst, const void *src, int size);
create_event
| Version
|
NID
|
| 3.60
|
0x56A13E90
|
SceUID create_event(SceClass *cls, const char *name, SceObjectBase **obj);
Increase references to pages
| Version
|
NID
|
| 3.60
|
0xBC0A1D60
|
int SceSysmemForDriver_BC0A1D60(int perm, const void *addr, unsigned int size);
Decrease references to pages
| Version
|
NID
|
| 3.60
|
0x22CBE925
|
int SceSysmemForDriver_22CBE925(int perm, const void *addr, unsigned int size);
ksceKernelAllocMemBlockExt
| Version
|
NID
|
| 3.60
|
0xD44F464D
|
int ksceKernelAllocMemBlockExt(const char *name, int type, unsigned int size, SceKernelAllocMemBlockKernelOpt *opt, SceKernelPaddrList *out_paddr_list);
sceKernelFindMemBlockForDriver
| Version
|
NID
|
| 3.60
|
0x9C78064C
|
int sceKernelFindMemBlockForDriver(int flags, void *base, SceSize size);
SceSysmemForDriver_98C15666
| Version
|
NID
|
| 3.60
|
0x98C15666
|
int SceSysmemForDriver_98C15666(SceUID uid, SceKernelAddrPair *addrpair)
Returns the paddr and size (addrpair) of the memblock if it's physically continuous.
SceSysmem
The SceSysmem library is responsible for both low-level and high-level memory management. There are functions for allocating raw blocks of memory (similar to Linux sbrk) as well as functions for maintaining a heap-like structure (similar to malloc) for kernel, however SceLibKernel implements a proper heap and that is used for user code.
sceKernelGetMemBlockInfoByRange
| Version |
NID
|
| 1.69 |
0x6F3DB4
|
sceKernelSyncVMDomain
| Version |
NID
|
| 1.69 |
0x19D2A81A
|
sceKernelRemapMemBlock
| Version |
NID
|
| 1.69 |
0x3B29E0F5
|
sceKernelGetMemBlockInfoByAddr
| Version |
NID
|
| 1.69 |
0x4010AD65
|
sceKernelMapMemBlock
| Version |
NID
|
| 1.69 |
0x7B763A21
|
sceKernelGetSubbudgetInfo
| Version |
NID
|
| 1.69 |
0x832B4A65
|
sceKernelGetFreeMemorySize
| Version |
NID
|
| 1.69 |
0x87CC580B
|
sceKernelOpenMemBlock
| Version |
NID
|
| 1.69 |
0x8EB8DFBB
|
sceKernelOpenVMDomain
| Version |
NID
|
| 1.69 |
0x9CA3EB2B
|
sceKernelFindMemBlockByAddr
| Version |
NID
|
| 1.69 |
0xA33B99D1
|
sceKernelFreeMemBlock
| Version |
NID
|
| 1.69 |
0xA91E15EE
|
sceKernelCloseMemBlock
| Version |
NID
|
| 1.69 |
0xB680E3A0
|
sceKernelGetMemBlockBase
| Version |
NID
|
| 1.69 |
0xB8EF5818
|
sceKernelAllocMemBlock
| Version |
NID
|
| 1.69 |
0xB9D5EBDE
|
sceKernelPartialMapMemBlock
| Version |
NID
|
| 1.69 |
0xC0A59868
|
sceKernelPartialUnmapMemBlock
| Version |
NID
|
| 1.69 |
0xCA99929B
|
sceKernelCloseVMDomain
| Version |
NID
|
| 1.69 |
0xD6CA56CA
|
sceKernelAllocMemBlockForVM
| Version |
NID
|
| 1.69 |
0xE2D7E137
|
sceKernelUnmapMemBlock
| Version |
NID
|
| 1.69 |
0xEE30D976
|
SceDipsw
SceCpu
This library provides wrapper for much ARM CP15 co-processor access as well as low level support of spinlocks and other synchronization primitives.
SceSysclib
The C standard library for use in the kernel only. (User code have SceLibKernel, which confusingly is user-only code). Include standard string functions (no insecure variants like strcpy).
strcmp
| Version
|
NID
|
| 1.69 (non-secure)
|
0x0B33BC43
|
strncmp
| Version
|
NID
|
| 1.69 (non-secure)
|
0x12cee649
|
strstr
| Version
|
NID
|
| 1.69 (non-secure)
|
0x1304A69D
|
rshift
| Version
|
NID
|
| 1.69 (non-secure)
|
0x1D89F6C0
|
memcpy
| Version
|
NID
|
| 1.69 (non-secure)
|
0x40c88316
|
strchr
| Version
|
NID
|
| 1.69 (non-secure)
|
0x38463759
|
memset2
| Version
|
NID
|
| 1.69 (non-secure)
|
0x502B000D
|
memmove
On 1.69, this seems to be implemented incorrectly.
| Version
|
NID
|
| 1.69 (non-secure)
|
0x6CC9C1A1
|
strrchr
| Version
|
NID
|
| 1.69 (non-secure)
|
0x7F0E0835
|
strncat
| Version
|
NID
|
| 1.69 (non-secure)
|
0xA1D1C32C
|
strtol
| Version
|
NID
|
| 1.69 (non-secure)
|
0xAB77C5AA
|
snprintf
| Version
|
NID
|
| 1.69 (non-secure)
|
0xAE7A8981
|
sceKernelStackCheckFail
| Version
|
NID
|
| 1.69 (non-secure)
|
0xb997493d
|
strnlen
| Version
|
NID
|
| 1.69 (non-secure)
|
0xCD4BD884
|
strlen
| Version
|
NID
|
| 1.69 (non-secure)
|
0xCFC6A9AC
|
memcmp
| Version
|
NID
|
| 1.69 (non-secure)
|
0xF939E83D
|
SceDipsw
sceKernelCheckDipsw
| Version |
NID
|
| 1.69 |
0x1C783FB2
|
sceKernelClearDipsw
| Version |
NID
|
| 1.69 |
0x800EDCC1
|
sceKernelSetDipsw
| Version |
NID
|
| 1.69 |
0x817053D4
|
SceDipswForDriver
ksceKernelCheckDipsw
| Version |
NID
|
| 3.60 |
0xA98FC2FD
|
ksceKernelClearDipsw
| Version |
NID
|
| 3.60 |
0xF1F3E9FE
|
ksceKernelSetDipsw
| Version |
NID
|
| 3.60 |
0x82E45FBF
|
SceUartForKernel
SceUartForKernel_41973874
| Version |
NID
|
| 3.60 |
0x41973874
|
int ksceUartWrite(int device, unsigned char data);
SceUartForKernel_38DB7629
| Version |
NID
|
| 3.60 |
0x38DB7629
|
Returns the number of words available to read from the read FIFO.
int ksceUartReadAvailable(int device);
SceUartForKernel_9BBF1255
| Version |
NID
|
| 3.60 |
0x9BBF1255
|
int ksceUartRead(int device);
SceUartForKernel_A9C74212
| Version |
NID
|
| 3.60 |
0xA9C74212
|
It initializes the clock generator registers for the device.
The default baud rate is 115200 for devices 0-5 and 250000 for the device 6.
int ksceUartInit(int device);
SceCpu
sceKernelCpuId
| Version |
NID
|
| 1.69 |
0x2704CFEE
|
SceCpuForKernel
void SceCpuForKernel_1BB2BB8D(void); // BPIALLIS, Branch predictor invalidate all (IS)
void SceCpuForKernel_264DA250(void); // ICIALLUIS, Instruction cache invalidate all (PoU, IS)
void SceCpuForKernel_2F3BF020(void); //DCISW, Data cache invalidate by set/way (all the cache)
void SceCpuForKernel_470EAE1E(int mva); //DCIMVAC, Data cache invalidate by MVA (PoC)
void SceCpuForKernel_4C4C7D6B(void); //BPIALL, Branch predictor invalidate all
void SceCpuForKernel_583F30D1(void *addr, unsigned int size); //DCIMVAC, Data cache invalidate by MVA (PoC)
void SceCpuForKernel_6BA2E51C(void *addr, unsigned int size); // DCCIMVAC, Data cache clean and invalidate by MVA (PoC)
void SceCpuForKernel_73A30DB2(void); // DCCSW, Data cache clean by set/way (all the cache)
void SceCpuForKernel_76DAB4D0(void); // DCCISW, Data cache clean and invalidate by set/way (all the cache)
void SceCpuForKernel_AEE0B489(void); //ICIALLU, Instruction cache invalidate all (PoU)
void SceCpuForKernel_C5C1EE4E(void *addr, unsigned int size); // DCCMVAC, Data cache clean by MVA (PoC)
void SceCpuForKernel_C8E8C9E9(int mva); //DCCIMVAC, Data cache clean and invalidate by MVA (PoC)
void SceCpuForKernel_F4C7F578(void *addr, unsigned int size); // ICIMVAU, Instruction cache invalidate by MVA (PoU)
void SceCpuForKernel_F7159B55(int mva); // DCCMVAC, Data cache clean by MVA (PoC)
Unrestricted Write for Kernel
Unrestricted memcpy by first setting the DACR register to 0xFFFF0000 and then doing a memcpy.
| Version
|
NID
|
| 1.69
|
0x8C683DEC
|
int unrestricted_memcpy_for_kernel(void *dst, void *src, size_t len);
get_paddr_2
| Version |
World |
NID
|
| 3.60 |
? |
0x67343a07
|
int get_paddr_2(int maskPAR, void *vaddr, void **result);
get_paddr_3
| Version |
World |
NID
|
| 3.60 |
? |
0x2a46e800
|
int get_paddr_3(void *vaddr, void **result);
SceCpuForKernel_D0D85FF8
| Version |
NID
|
| 3.60 |
0xD0D85FF8
|
int invalidate_unknown_coprocessor_cache(void);
SceCpuForDriver
SceCpuForDriver_BF82DEB2_lock
| Version |
NID
|
| 1.60 |
0xBF82DEB2
|
int SceCpuForDriver_BF82DEB2_lock(int *addr);
SceCpuForDriver_D6ED0C46_unlock
| Version |
NID
|
| 1.60 |
0xD6ED0C46
|
int SceCpuForDriver_D6ED0C46_unlock(int *addr);
These two functions implement a simple mutual exclusive access on a resource addr using LDREX/STREX.
SceCpuForDriver_D32ACE9E_lock_int
| Version |
NID
|
| 3.35 |
0xD32ACE9E
|
int SceCpuForDriver_D32ACE9E_lock_int(int *addr);
SceCpuForDriver_7BB9D5DF_unlock_int
| Version |
NID
|
| 3.35 |
0x7BB9D5DF
|
void SceCpuForDriver_7BB9D5DF_unlock_int(int *addr, int prev_state);
Same as the pair above, but while mutex is held, interrupts are disabled. Used like this:
int prev_state = SceCpuForDriver_D32ACE9E_lock_int(mutex);
// do work
SceCpuForDriver_7BB9D5DF_unlock_int(mutex, prev_state);
SceCpuForDriver_4C38CE4D_lock_int_2
| Version |
NID
|
| 3.35 |
0x4C38CE4D
|
SceCpuForDriver_9EC91017_unlock_int_2
| Version |
NID
|
| 3.35 |
0x9EC91017
|
Same as the pair above, but stores 0x80000000 as the addr value instead of LR.
SceCpuForDriver_821FC0EE_disable_irq
| Version |
NID
|
| 1.60 |
0x821FC0EE
|
int SceCpuForDriver_821FC0EE_disable_irq(void);
Disables irq (but not fiq) and returns previous interrupt bit status (so either 0 or 0x80).
SceCpuForDriver_F5BAD43B_restore_irq
| Version |
NID
|
| 1.60 |
0xF5BAD43B
|
void SceCpuForDriver_F5BAD43B_restore_irq(int previous_state);
Restores previous irq state, pass either 0 or 0x80.
SceCpuForDriver_5E4D5DE1_get_multproc_id_reg
| Version |
NID
|
| 1.50 |
0x5E4D5DE1
|
Return the CPU ID of the current core.
SceSysclibForKernel
SceSysclibForDriver
__aeabi_idiv
| Version |
NID
|
| 3.60 |
0x2518CD9E
|
__aeabi_uidiv
| Version |
NID
|
| 3.35 |
0xA9FF1205
|
__aeabi_uidivmod
| Version |
NID
|
| 3.35 |
0xA46CB7DE
|
__aeabi_ldivmod
| Version |
NID
|
| 3.60 |
0x7554ab04
|
memcpy
| Version |
NID
|
| 1.60 |
0x40C88316
|
memset
| Version |
NID
|
| 1.60 |
0x0AB9BF5C
|
strchr
| Version |
NID
|
| 3.35 |
0x38463759
|
strncmp
| Version |
NID
|
| 1.60 |
0x12CEE649
|
memcmp
| Version |
NID
|
| 3.60 |
B5A4D745
|
timing constant memcmp
SceSysrootForKernel
sceSysrootGetSelfInfoForKernel
| Version |
NID
|
| 3.60 |
0xF10AB792
|
typedef struct self_info_pair
{
uint32_t size; // 0x0C
char* elf_data;
uint32_t elf_size;
} self_info_pair;
int sceSysrootGetSelfInfoForKernel(int index, self_info_pair* state);
| Index |
SELF
|
| 0 |
gcauthmgr_sm.self
|
| 1 |
rmauth_sm.self
|
| 2 |
encdec_w_portability_sm.self
|
SceSysrootForKernel_CC85905B
| Version |
NID
|
| 3.60 |
0xCC85905B
|
Returns the exception vectors base address. The address of the exception vectors for the CPU i is: SceSysrootForKernel_CC85905B() + 0x40 * i.
sceSysrootGetSysrootBufferForKernel
| Version |
NID
|
| 3.60 |
0x9DB56D1F
|
Returns pointer to Sysroot buffer.
void *sceSysrootGetSysrootBufferForKernel(void);
sceSysrootGetSysbaseForKernel
| Version |
NID
|
| 3.60 |
0x3E455842
|
sceSysrootGetProcessTitleIdForPidForKernel
| Version |
NID
|
| 3.60 |
0xEC3124A3
|
int sceSysrootGetProcessTitleIdForPidForKernel(SceUID pid, char *titleid, size_t len);
sceSysrootIsAuCodecIcConexantForKernel
| Version |
NID
|
| 3.60 |
0x46E72428
|
int sceSysrootIsAuCodecIcConexantForKernel(void);
sceSysrootIsBsodRebootForKernel
| Version |
NID
|
| 3.60 |
0x4373AC96
|
int sceSysrootIsBsodRebootForKernel(void);
sceSysrootIsExternalBootModeForKernel
| Version |
NID
|
| 3.60 |
0x89D19090
|
int sceSysrootIsExternalBootModeForKernel(void);
sceSysrootIsManufacturingModeForKernel
| Version |
NID
|
| 3.60 |
0x55392965
|
int sceSysrootIsManufacturingModeForKernel(void);
sceSysrootIsSafeModeForKernel
| Version |
NID
|
| 3.60 |
0x834439A7
|
int sceSysrootIsSafeModeForKernel(void);
sceSysrootIsUpdateModeForKernel
| Version |
NID
|
| 3.60 |
0xB0E1FC67
|
int sceSysrootIsUpdateModeForKernel(void);
sceSysrootIsUsbEnumWakeupForKernel
| Version |
NID
|
| 3.60 |
0x79C9AE10
|
int sceSysrootIsUsbEnumWakeupForKernel(void);
sceSysrootUseInternalStorageForKernel
| Version |
NID
|
| 3.60 |
0x50FE3B4D
|
int sceSysrootUseInternalStorageForKernel(void);
sceSysrootGetNidNameForKernel
| Version |
NID
|
| 3.60 |
0x0B79E220
|
int sceSysrootGetNidNameForKernel(unsigned int nid, const char **name);
SceSysrootForKernel_FF9F80FF
| Version |
NID
|
| 3.60 |
0xFF9F80FF
|
int SceSysrootForKernel_FF9F80FF(SceUID pid, const void *addr, unsigned int *info); // info[0] = 0x3C
Returns export info at address for pid (contains module, lib and NID and their names).
SceKernelUtilsForDriver
sceAesDecrypt1ForDriver
Decrypt with AES.
| Version |
NID
|
| 1.69 |
0xD8678061
|
| 3.60 |
0xD8678061
|
int sceAesDecrypt1ForDriver(void *ctx, const unsigned char* src, unsigned char* dst);
sceAesDecrypt2ForDriver
| Version |
NID
|
| 3.60 |
0xE39CD272
|
int sceAesDecrypt2ForDriver(void *ctx, const unsigned char* src, unsigned char* dst);
sceAesEncrypt1ForDriver
Encrypt with AES. There are two functions that are the same on 1.69.
| Version |
NID
|
| 1.69 |
0xC2A61770
|
| 3.60 |
0xC2A61770
|
int sceAesEncrypt1ForDriver(void *ctx, const unsigned char* src, unsigned char* dst);
sceAesEncrypt2ForDriver
Encrypt with AES. There are two functions that are the same on 1.69.
| Version |
NID
|
| 1.69 |
0x302947B6
|
| 3.60 |
0x302947B6
|
int sceAesEncrypt2ForDriver(void *ctx, const unsigned char* src, unsigned char* dst);
sceAesInit1ForDriver
This sets up the AES engine. ctx is a 960 byte buffer (int 1.69). blocksize and keysize is the security in bits. 128/196/256 are supported values.
| Version |
NID
|
| 1.69 |
0xF12B6451
|
| 3.60 |
0xF12B6451
|
last arg to subroutine is 0
int sceAesInit1ForDriver(void *ctx, int blocksize, int keysize, const unsigned char* key);
sceAesInit2ForDriver
| Version |
NID
|
| 3.60 |
0xEDA97D6D
|
last arg to subroutine is 1
int sceAesInit2ForDriver(void *ctx, int blocksize, int keysize, const unsigned char* key);
sceAesInit3ForDriver
| Version |
NID
|
| 3.60 |
0x72408E29
|
last arg to subroutine is 2
int sceAesInit3ForDriver(void *ctx, int blocksize, int keysize, const unsigned char* key);
sceDeflateDecompressForDriver
| Version |
NID
|
| 3.60 |
0x8AF1FAD4
|
sceDeflateDecompressPartialForDriver
| Version |
NID
|
| 3.60 |
0x3D74CCDF
|
sceGzipDecompressForDriver
| Version |
NID
|
| 3.60 |
0x367EE3DF
|
| Version |
NID
|
| 3.60 |
0xCD3AE08F
|
sceGzipGetCompressedDataForDriver
| Version |
NID
|
| 3.60 |
0x63619124
|
sceGzipGetInfoForDriver
| Version |
NID
|
| 3.60 |
0xFFC6A10F
|
sceGzipGetNameForDriver
| Version |
NID
|
| 3.60 |
0xF901FD3E
|
sceGzipIsValidForDriver
| Version |
NID
|
| 3.60 |
0xD8FAEFD4
|
sceHmacSha1DigestForDriver
| Version |
NID
|
| 3.60 |
0x29A28957
|
int sceHmacSha1DigestForDriver(const unsigned char* key, int key_len, const unsigned char* data, int data_len, unsigned char* digest);
sceHmacSha224DigestForDriver
| Version |
NID
|
| 3.60 |
0x7F2A7B99
|
int sceHmacSha224DigestForDriver(const unsigned char* key, int key_len, const unsigned char* data, int data_len, unsigned char* digest);
sceHmacSha256DigestForDriver
| Version |
NID
|
| 3.60 |
0x83EFA1CC
|
int sceHmacSha256DigestForDriver(const unsigned char* key, int key_len, const unsigned char* data, int data_len, unsigned char* digest);
sceMt19937GlobalInitForDriver
| Version |
NID
|
| 3.60 |
0xD428CC2A
|
sceMt19937GlobalUninitForDriver
| Version |
NID
|
| 3.60 |
0x875B2A1C
|
sceMt19937InitForDriver
| Version |
NID
|
| 3.60 |
0x4C9A5730
|
sceMt19937UIntForDriver
| Version |
NID
|
| 3.60 |
0x92AEDFBC
|
sceSfmt19937FillArray32ForDriver
| Version |
NID
|
| 3.60 |
0x2B30548B
|
sceSfmt19937FillArray64ForDriver
| Version |
NID
|
| 3.60 |
0x49B41540
|
sceSfmt19937GenRand32ForDriver
| Version |
NID
|
| 3.60 |
0xBBE4701A
|
sceSfmt19937GenRand64ForDriver
| Version |
NID
|
| 3.60 |
0x45DEAAD6
|
sceSfmt19937InitByArrayForDriver
| Version |
NID
|
| 3.60 |
0x33AE1203
|
sceSfmt19937InitGenRandForDriver
| Version |
NID
|
| 3.60 |
0xAB48C3CA
|
sceSha1BlockInitForDriver
| Version |
NID
|
| 3.60 |
0xE4390FFA
|
int sceSha1BlockInitForDriver(void* ctx);
sceSha1BlockResultForDriver
| Version |
NID
|
| 3.60 |
0x48F24106
|
int sceSha1BlockResultForDriver(void* ctx, unsigned char* digest);
sceSha1BlockUpdateForDriver
| Version |
NID
|
| 3.60 |
0x478A6F3C
|
int sceSha1BlockUpdateForDriver(void* ctx, const unsigned char* data, int size);
sceSha1DigestForDriver
| Version |
NID
|
| 3.60 |
0x87DC7F2F
|
int sceSha1DigestForDriver(unsigned char *data, int size, unsigned char* digest);
sceSha224BlockInitForDriver
| Version |
NID
|
| 3.60 |
0xC762EA6D
|
int sceSha224BlockInitForDriver(void* ctx);
sceSha224BlockResultForDriver
| Version |
NID
|
| 3.60 |
0xFBF2A442
|
int sceSha224BlockResultForDriver(void* ctx, unsigned char* digest);
sceSha224BlockUpdateForDriver
| Version |
NID
|
| 3.60 |
0x7556E611
|
int sceSha224BlockUpdateForDriver(void* ctx, const unsigned char* data, int size);
sceSha224DigestForDriver
| Version |
NID
|
| 3.60 |
0x9EA9D4DC
|
int sceSha224DigestForDriver(unsigned char *data, int size, unsigned char* digest);
sceSha256BlockInitForDriver
| Version |
NID
|
| 3.60 |
0xD909FA2C
|
int sceSha256BlockInitForDriver(void* ctx);
sceSha256BlockResultForDriver
| Version |
NID
|
| 3.60 |
0x4899CD4B
|
int sceSha256BlockResultForDriver(void* ctx, unsigned char* digest);
sceSha256BlockUpdateForDriver
| Version |
NID
|
| 3.60 |
0x236A9097
|
int sceSha256BlockUpdateForDriver(void* ctx, const unsigned char* data, int size);
sceSha256DigestForDriver
| Version |
NID
|
| 3.60 |
0xA773A6A8
|
int sceSha256DigestForDriver(unsigned char *data, int size, unsigned char* digest);
sceZlibDecompressForDriver
| Version |
NID
|
| 3.60 |
0x900148DB
|
sceZlibGetCompressedDataForDriver
| Version |
NID
|
| 3.60 |
0x01EB6C45
|
sceZlibGetInfoForDriver
| Version |
NID
|
| 3.60 |
0x5B9BCD75
|
SceZlibForDriver
zlib compression library.
| Firmware |
zlib version
|
| 1.60 |
1.2.5
|
inflate
| Version |
NID
|
| 1.60 |
0xE4F34A68
|
deflate
| Version |
NID
|
| 1.60 |
0xE859D60F
|
deflateReset
| Version |
NID
|
| 1.60 |
0x68CFEA45
|
crc32
| Version |
NID
|
| 1.60 |
0xE0CE06C0
|
adler32
| Version |
NID
|
| 1.60 |
0x98619620
|
inflateSetDictionary
| Version |
NID
|
| 1.60 |
0x7B16DBD6
|
SceKernelSuspendForDriver
Libraries can register callbacks for handling suspend/resume related events.
sceKernelSuspendRegisterCallbackForDriver
| Version |
NID
|
| 1.69 |
0x04C05D10
|
| 3.60 |
0x04C05D10
|
typedef struct {
uint32_t size; // 24
uint32_t unk1;
uint32_t unk2;
uint32_t unk3;
uint32_t unk4;
uint32_t unk5;
} suspend_args_t;
typedef int (suspend_callback_t)(int resume, int eventid, suspend_args_t *args, void *opt);
int sceKernelSuspendRegisterCallbackForDriver(const char *name, suspend_callback_t *callback_func, void *opt);
Registers a function for handling suspend/resume. resume is 0 if we are currently suspending and 1 if we are currently resuming. opt is passed from the registration. Registration
adds an entry to a linked list and returns the block id for the new entry.
Unregister
| Version |
NID
|
| 1.69 |
0xDD61D621
|
int suspend_unregister(int id);
Call with the id returned from suspend_register_callback to remove the entry from the linked list and free the memory.
Make Callback
| Version |
NID
|
| 1.69 |
0xD4622EA8
|
int suspend_make_callback(int resume, int eventid, suspend_args_t *args, int stop_on_error);
This will go through the linked list and call each callback. If stop_on_error is set, then the first callback that returns a negative value will stop the call chain and return the block id of the callback that broke the chain. Otherwise, this function will invoke each callback and return zero.
Reset auto-suspend timer
| Version |
NID
|
| 3.60 |
0xE0489831
|
int reset_autosuspend_timer(int unk);
SceQafMgrForDriver
Provides many device permission checks including Vita model checks, running app privilege checks, and so on.
ScePmMgrForDriver
scePmGetBootTypeIndicatorBit2ForDriver
| Version |
World |
NID
|
| 3.60 |
non-secure |
0x2AC815A2
|
gets data using ksceKernelGetSysrootBuffer
int scePmGetBootTypeIndicatorBit2ForDriver(char* result);
scePmGetBootTypeIndicatorBit2_2ForDriver
| Version |
World |
NID
|
| 3.60 |
non-secure |
0xBD1F193B
|
gets data using ksceKernelGetSysrootBuffer
int scePmGetBootTypeIndicatorBit2_2ForDriver(char* result);
SceSblAIMgrForDriver
SceProcEventForDriver
SceSysrootForDriver
SceSysrootForDriver_930B1342
| Version
|
World
|
NID
|
| 3.60
|
non-secure
|
0x930B1342
|
int sceSysrootInitI2c?(void);
SceDebugLed
SceDebugLedForDriver
SceDebugForKernel
SceDebugForKernel_82D2EDCE
| Version |
NID
|
| 3.60 |
0x82D2EDCE
|
Print character.
int SceDebugForKernel_82D2EDCE(int character);
SceDebugForKernel_E783518C
| Version |
NID
|
| 3.60 |
0xE783518C
|
Returns pointer to current debug print char handler.
void *SceDebugForKernel_E783518C(void);
SceDebugForKernel_E6115A72
| Version |
NID
|
| 3.60 |
0xE6115A72
|
Set debug print char handler.
int SceDebugForKernel_E6115A72(int (*func)(void *arg, char c), void *args);
SceDebugForKernel_082B8D6A
| Version |
NID
|
| 3.60 |
0x082B8D6A
|
Print kernel exception information
//name can be:
//UNDEF - ?
//PABT - Prefetch Abort
//DABT - Data Abort
//NEST - ?
int SceDebugForKernel_082B8D6A(void *unk, void *ctx, int index, char *name);
SceDebugForDriver
SceSysmemForTZS
SceSysmemForTZS_0028E26C
| Version
|
World
|
NID
|
| 1.69
|
Secure
|
0x0028E26C
|
int sceKernelAllocMemBlockForPidForTZS(int pid, const char *name, SceKernelMemBlockType type, int size, SceKernelAllocMemBlockKernelOpt *optp);
SceSysrootForTZS
SceSysrootForTZS_29C1049E
| Version
|
World
|
NID
|
| 1.69
|
secure
|
0x29C1049E
|
Get sysroot buffer.