Cmep basics
Jump to navigation
Jump to search
Calling convention
- $1 = arg0
- $2 = arg1
- $3 = arg2
- $4 = arg3
Unmodified by callee: $5, $6, $7, $8.
Clobbered by callee: $9, $10, $11, $12.
Configuration
Note: These registers were dumped with a Secure Module exploit. Some options are read/write so it might differ.
$cfg
0xF00004AA
$ccfg
0x5B105B08
$rcfg
0x01000100
$opt
0x03FD0201
This register is read-only.
- CBS = 00: coprocessor data bus width 32-bit
- DBS = 00: DSP data bus width 32-bit
- 0
- HWE = 0: hardware engine off
- DIV = 1: 32-bit divide instruction on
- MUL = 1: multiply instruction on
- BIT = 1: bit manipulation instruction on
- SAT = 1: saturation instruction on
- CLP = 1: clip instruction on
- MIN = 1: min/max instruction on
- AVE = 1: average instruction on
- ABS = 1: abs instruction on
- 0
- LDZ = 1: leading zero instruction on
- BIS = 00: bus interface width is 32-bit
- LBS = 00: local bus interface width is 32-bit
- 0
- TCN = 010: 2 timer/counter channels
- 0
- VL64 = 0: 64-bit VLIW off
- VL32 = 0: 32-bit VLIW off
- COP = 0: coprocessor off
- 0
- DSP = 0: DSP off
- UCI = 0: UCI off
- DBG = 1: DBG on