SceExcpmgr

SceExcpmgr is a kernel module that sets up exception handling and a version exists in both worlds. In non-secure world, after the kernel is booted up, the exception handlers pointed to by VBAR all jump into code in this module.

Module

This module exists in both non-secure and secure world. The non-secure world SELF can be found in os0:kd/sysmem.skprx.

Known NIDs

Version	Name	World	Privilege	NID
1.69	SceExcpmgr	Non-secure	Kernel	0xBBCA9AB6
1.69	SceExcpmgr	Secure	Kernel	0x93332B9A

Libraries

This module only exports kernel libraries.

Known NIDs

Version	Name	World	Visibility	NID
1.69	SceExcpmgrForKernel	Non-secure	Kernel	0x4CA0FDD5
1.69	SceExcpmgrForTZS	Secure	Kernel	0x8F526F35

SceExcpmgrForKernel

sceKernelRegisterPriorityExceptionHandlerForKernel

Version	NID
3.60	0x03499636

Installs an exception handler.

int sceKernelRegisterPriorityExceptionHandlerForKernel(int excpcode, int priority, void *function);

The function must be ARM and not thumb, and the allowed priority values are from 0 to 7 (including them).

Where excpcode can be:

• Reset: excpcode = 0
• Undefined Instruction: excpcode = 1
• Supervisor Call: excpcode = 2
• Prefetch Abort: excpcode = 3
• Data Abort: excpcode = 4
• Not used: excpcode = 5
• IRQ interrupt: excpcode = 6
• FIQ interrupt: excpcode = 7

Exceptions

SVC

The Syscalls interface is defined in non-secure kernel as:

Register	Value
R0	First argument
R1	Second argument
R2	Third argument
R3	Fourth argument
R12	Syscall number

On return, R1-R3 and R12 are cleared to 0x0 or 0xDEADBEEF to prevent any data leaks. All user pointers passed to syscalls are accessed with ARM instructions LDRT and STRT for hardware forced permission checks. Syscalls 0x0 - 0xFF are likely a "fastcall" interface that do not mask interrupts or set the DACR, however currently are no such fastcalls defined. Syscalls 0x100 - 0xFFF are made with IRQ interrupts masked and DACR set to 0xFFFF0000 (to prevent access to certain memory domains). Any other syscall numbers are invalid.

System calls are handled in "system" mode defined in ARMv7 (mode 0b11111).

User exported functions loaded by SceKernelModulemgr are exported as syscalls. The number assigned to the syscall are randomized with respect to each library but not within a library. That means, for example, two functions exported by a library will always be some syscall number apart even though that number will change on each boot.

There is no SVC in secure world because all code in secure world is running as kernel.

SMC

The SMC interface for making a non-secure kernel call to secure-kernel is:

Register	Value
R0	First argument
R1	Second argument
R2	Third argument
R3	Fourth argument
R12	Secure service number

The SMC interface is very similar to SVC from userland to non-secure kernel. The SMC handler and MVBAR is set up in secure world by SceExcpmgrForTZS. 0x0 - 0xFF are fast service calls. 0x100 - 0xFFF are normal service calls ran with IRQs masked.

Secure services are ran in ARM system processor mode (0b11111) in the secure world.

SMC calls are registered by SceIntrmgrForTZS.

SMC calls

Number	Arguments	Notes
0x101	int smc_set_sce_shared_memory_block_s(unsigned int paddr, unsigned int size);
0x103	int smc_disable_virtual_ranges(void);	Disables the virtual ranges: 0x40000000-0x40100000, 0x50000000-0x51000000 and 0x51000000-0x52000000 to the context with PID 0x10007.
0x10F	int smc_ple_flush_kill_and_l1_dcache_clean_invalidate_all(void);	Flushes (and kills if there is activity) the PLE (Preload Engine) and then cleans and invalidates all the L1 Dcache.
0x114	int smc_bus_freq_op(int operation, unsigned int freq);	op = 0: Set bus frequency, op = 1: Get bus frequency, op = 2: Set GPU Xbar frequency, op = 3: Get GPU Xbar frequency
0x117	int smc_cdram_enable(void);	Seems to enable the CDRAM (by using the SceEmcTop registers).
0x118	CDRAM related	Seems to enable something CDRAM related.
0x119	CDRAM related	Seems to disable something CDRAM related.
0x11A	int smc_reset_device(int type, int unk);	Reset device (check [1] for more info).
0x11D	int smc_mips_set_memory_bank_start_paddr(int bank, unsigned int paddr);	Valid banks 0-7, and paddrs: 0x20000000-0x2FFFFFFF and 0x42800000-0x7FFFFFFF.
0x120	int smc_mips_get_memory_bank_start_paddr(int bank);	Valid banks 0-7.
0x12D	int smc_sbl_sm_sched_proxy_invoke(int priority, uintptr_t paddr, unsigned int num_pairs, int id);	Used by sceSblSmSchedProxyInvoke.
0x12E	int smc_sbl_sm_sched_proxy_wait(int id, int idx);	Used by sceSblSmSchedProxyWait.
0x12F	int smc_sbl_sm_sched_proxy_get_status(int id, int idx);	Used by sceSblSmSchedProxyGetStatus.
0x130	SBL SM Sched related
0x133	int smc_sbl_sm_sched_call_func(int id, int unk, uintptr_t cmd_paddr);	Used by sceSblSmSchedCallFunc. cmd_paddr is paddr(SceSblSmschedCallFuncCommand) | 1.
0x134	SBL SM Sched related
0x135	SBL SM Sched related
0x136	SBL SM Sched related
0x137	SBL SM Sched related
0x138	SBL SM Sched related
0x139	SBL SM Sched related
0x13A	SBL SM Sched related. Interrupt Cry2Arm set enable.
0x13B	SBL SM Sched related. Interrupt Cry2Arm clear enable.
0x13C	SBL SM Sched related. Waits polling.
0x168	int smc_0x168_dmac(int index, int value);	SceDmacmgrDmac related. Writes value to SceDmacmgrDmacN + 0x100.
0x169	int smc_0x169_dmac(int index, int value);	SceDmacmgrDmac related. Writes value to SceDmacmgrDmacN + 0x104.
0x16A	int smc_l2_write_control_register(int value);	Flushes and invalidates the entire L2 Cache (Clean and Invalidate by Way with way = 0xFFFF, offset 0x7FC), then performs an L2 Cache Sync (offset 0x730), and finally writes value to the L2 Control Register (offset 0x100).
0x16B	int smc_l2_write_auxiliary_control_register(int value);	Writes value to the L2 Auxiliary Control Register (offset 0x104).

Aborts

On development units, data and prefetch aborts can handle BKPT instruction for software breakpoints. SceDebug uses this to handle usermode breakpoints. There is no built-in support for BKPT in kernel code.

SceSysmem uses data aborts with the LDRT and STRT instructions to implement user pointer checking. When LDRT/STRT throws a MMU data exception because of an invalid access and the exception came from the sceKernelMemcpyUserToKernel or sceKernelMemcpyKernelToUser (or related functions), the data abort handler will resume execution.

IRQ

IRQs are only handled in non-secure world. An IRQ in secure world is fatal. See SceKernelIntrMgr.

FIQ

FIQs are only handled in secure world because of the bit set in the SCR. Because of this, it is likely that secure devices such as the F00D Processor use FIQs to communicate with the Cortex A9 cores. See SceKernelIntrMgr.