SceOled

Module

Known NIDs

Version	Name	World	Privilege	NID
1.69	SceOled	Non-secure	Kernel	0x5410837A

Libraries

Known NIDs

Version	Name	World	Visibility	NID
1.69	SceOledForDriver	Non-secure	Kernel	0x60C7478A

Resources

TODO: move to OLED.

• Datasheets:
  • AMS495QA04 (very useful: hardware + driver API): File:AMS495QA04 Ver2.0 20121113 201509238327.pdf
  • AMS495QA01 (hardware, not very useful): File:AMS495QA01 datasheet.pdf
• Baremetal OLED usage: https://github.com/xerpi/vita-baremetal-sample/blob/master/src/oled.c
• Linux driver of a similar screen: http://elixir.free-electrons.com/linux/latest/source/drivers/gpu/drm/panel/panel-samsung-ld9040.c#L37
• Some interesting paper explaining how the gamma lookup table is generated: http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=1343918
• DCS documentation: https://www.tonylabs.com/wp-content/uploads/MIPI_DCS_specification_v1.02.00.pdf

Types

enum SceOledError {
    SCE_OLED_ERROR_INVALID_BRIGHTNESS_VALUE = 0x803F0A02,
    SCE_OLED_ERROR_INVALID_READY_STATUS = 0x803F0A03,
    SCE_OLED_ERROR_NOT_READY = 0x803F0A04,
    SCE_OLED_ERROR_INTERNAL = 0x803F0A05
};

enum SceOledStatus {
    SCE_OLED_STATUS_NOT_READY = 0,
    SCE_OLED_STATUS_READY = 1,
    SCE_OLED_STATUS_ERROR = 2
};

struct SceOledCmd {
    unsigned char cmd,
    unsigned char size,
    unsigned char buf[size]
}

A cmd_queue is a contiguous array of SceOledCmd of different sizes. To get the next SceOledCmd of a queue, do:

struct SceOledCmd *cur_cmd = ...
struct SceOledCmd *next_cmd = &(cur_cmd->buf) + cur_cmd->size;

if (next_cmd->cmd == 0 || next_cmd->cmd == 255) {...} // End of queue

Available commands

Cmd	Size	Buf	Description
178	1	Unknown	Unknown
249	1 or 22	Unknown, for example <0x01, 0xCFBE9F9F, 0xCBC2C9D7, 0xDEE3E1BB, 0xFAD3D0D6, 0x002FE6ED, 0x2F> (Little-Endian)	Change Brightness

SceOledForDriver

sceOledWaitReadyForDriver

Version	NID
3.60	0x0CC6BCB4

int sceOledWaitReadyForDriver();

Waits until the OLED has been initialized.

SceOledForDriver_26F9EEA8

Version	NID
3.60	0x26F9EEA8

int SceOledForDriver_26F9EEA8_oled_disable(void);

Disables the OLED by clearing the GPIO bus 0 port 0.

SceOledForDriver_2F0C4B67

Version	NID
3.60	0x2F0C4B67

int SceOledForDriver_2F0C4B67_send_cmd(u8 cmd, void *buffer, int size);

Sends a command to the OLED (via SPI).

sceOledGetBrightnessForDriver

Version	NID
3.60	0x43EF811A

int ceOledGetBrightnessForDriver();

Get the wide brightness value (0-65536).

sceOledDisplayOnForDriver

Version	NID
3.60	0x4C7836C7

int sceOledDisplayOnForDriver();

sceOledGetDisplayColorSpaceModeForDriver

Version	NID
3.60	0x4F8A1D4A

int sceOledGetDisplayColorSpaceModeForDriver(void);

SceOledForDriver_6B1E0B52

Version	NID
3.60	0x6B1E0B52

int SceOledForDriver_6B1E0B52_oled_enable(void);

Enables the OLED by setting the GPIO bus 0 port 0.

SceOledForDriver_9F4ABDDC

Version	NID
3.60	0x9F4ABDDC

int SceOledForDriver_9F4ABDDC_is_disabled(void);

Returns the OLED status by reading the GPIO bus 0 port 0.

sceOledDisplayOffForDriver

Version	NID
3.60	0xBC84602E

int sceOledDisplayOffForDriver();

SceOledForDriver_C9D5987C

Version	NID
3.60	0xC9D5987C

int SceOledForDriver_C9D5987C_get_DDB(unsigned short *supplier_id, unsigned short *supplier_elective_data);

Returns the Device Descriptor Block (DDB), read with MIPI DSI command read_DDB_start (0xA1).

sceOledSetDisplayColorSpaceModeForDriver

Version	NID
3.60	0xDABBD9D3

int sceOledSetDisplayColorSpaceModeForDriver(int mode);

SceOledForDriver_E30604CC

Version	NID
3.60	0xE30604CC

int SceOledForDriver_E30604CC_dispatch_cmd_list(void);

Dispatches the OLED cmd list (using ksceOledForDriver_2F0C4B67).

sceOledSetBrightnessForDriver

Version	NID
3.60	0xF9624C47

int sceOledSetBrightnessForDriver(unsigned int brightness);

Set the brightness (brightness needs to be in the range 0-65536). 0 means screen turned off, 1 means screen dimmed (like if you wait for a long time without touching your screen).

The brightness has actually 17 different values: 1 special value for brightness=0, and 16 different values for the rest (real_value=brightness/4096).