IFTU Registers

From Vita Development Wiki
Jump to navigation Jump to search

MMIO Interfaces

Name Physical address
SceIftu0RegA (OLED/LCD FB) 0xE5020000
SceIftu0RegB 0xE5021000
SceIftuc0Reg 0xE5022000
SceIftu1RegA (HDMI FB) 0xE5030000
SceIftu1RegB 0xE5031000
SceIftuc1Reg 0xE5032000
SceIftu2Reg 0xE5040000

Registers

SceIftu0RegA, SceIftu0RegB, SceIftu1RegA, SceIftu0RegB (plane registers)

Offset Size Description
0x000 4 Control register: bit 0 = enable?, bit 2 = ??, bit 3 = ??
0x004 4 CRTC mask: bit 0 = enable scanout to engine/CRTC of OLED/LCD, bit 1 = enable scanout to engine/CRTC of HDMI
0x040 4 Interrupts (read = triggered interrupts, write = clear interrupt)
0x050 4 Interrupt enable. bit 0 = first plane, bit 1 = second plane
0x054 4 ??
0x058 4 ??
0x08C 4 Alpha value (transparency) from 0x00 to 0xFF
0x0A0 4 Alpha control: (bit 0 = disable alpha blending)
0x100 4 CSC Control. bit 0 = enable CSC
0x104 4 CSC unknown
0x108 4 CSC unknown
0x10C 4 CSC rr, S3.9 fixed point format
0x110 4 CSC rg, S3.9 fixed point format
0x114 4 CSC rb, S3.9 fixed point format
0x118 4 CSC gr, S3.9 fixed point format
0x11C 4 CSC gg, S3.9 fixed point format
0x120 4 CSC gb, S3.9 fixed point format
0x124 4 CSC br, S3.9 fixed point format
0x128 4 CSC bg, S3.9 fixed point format
0x12C 4 CSC bb, S3.9 fixed point format
0x130 4 CSC post-multiplication add (fb plane 0), 10-bit int
0x134 4 CSC post-multiplication add (fb planes 1 and 2), 10-bit int
0x138 4 CSC rr, S3.9 fixed point format
0x13C 4 CSC rg, S3.9 fixed point format
0x140 4 CSC rb, S3.9 fixed point format
0x144 4 CSC gr, S3.9 fixed point format
0x148 4 CSC gg, S3.9 fixed point format
0x14C 4 CSC gb, S3.9 fixed point format
0x150 4 CSC br, S3.9 fixed point format
0x154 4 CSC bg, S3.9 fixed point format
0x158 4 CSC bb, S3.9 fixed point format
0x15C 4 CSC post-multiplication clamp range max (fb plane 0), 10-bit int
0x160 4 CSC post-multiplication clamp range min (fb plane 0), 10-bit int
0x164 4 CSC post-multiplication clamp range max (fb planes 1 and 2), 10-bit int
0x168 4 CSC post-multiplication clamp range min (fb planes 1 and 2), 10-bit int
0x180 4 Some flags (bilinear filter)
0x200 + n * 0x100 + 0x00 4 Source plane 0 physical address
0x200 + n * 0x100 + 0x04 4 Source plane 1 physical address
0x200 + n * 0x100 + 0x08 4 Source plane 2 physical address
0x200 + n * 0x100 + 0x40 4 Source pixelformat (0x10 = A8B8G8R8)
0x200 + n * 0x100 + 0x44 4 Source width (aligned to 16)
0x200 + n * 0x100 + 0x48 4 Source height (aligned to 8)
0x200 + n * 0x100 + 0x4C 4 Control register. bit 0 = disable plane
0x200 + n * 0x100 + 0x54 4 Source leftover stride, ((pitch - aligned_width) * bpp)
0x200 + n * 0x100 + 0x58 4 Source leftover align, if YCbCr: (width >> 1) & 0xF (Chroma align?)
0x200 + n * 0x100 + 0x60 4 Framebuffer vertical top padding
0x200 + n * 0x100 + 0x64 4 Framebuffer vertical bottom padding
0x200 + n * 0x100 + 0x68 4 Framebuffer horizontal left padding
0x200 + n * 0x100 + 0x6C 4 Framebuffer horizontal right padding
0x200 + n * 0x100 + 0x80 4 Destination plane 0 physical address
0x200 + n * 0x100 + 0x84 4 Destination plane 1 physical address
0x200 + n * 0x100 + 0x88 4 Destination plane 2 physical address
0x200 + n * 0x100 + 0xA0 4 Destination pixelformat
0x200 + n * 0x100 + 0xA4 4 Destination width
0x200 + n * 0x100 + 0xA8 4 Destination height
0x200 + n * 0x100 + 0xB4 4 Destination leftover stride, ((pitch - aligned_width) * bpp)
0x200 + n * 0x100 + 0xB8 4 Destination leftover align, if YCbCr: (width >> 1) & 0xF (Chroma align?)
0x200 + n * 0x100 + 0xC0 4 Scanout source width in 16.16 fixed point ratio of the destination width
0x200 + n * 0x100 + 0xC4 4 Scanout source height in 16.16 fixed point ratio of the destination width
0x200 + n * 0x100 + 0xC8 4 Scanout destination X
0x200 + n * 0x100 + 0xCC 4 Scanout destination Y
0x200 + n * 0x100 + 0xD0 4 Scanout source X in 4.4 fixed point
0x200 + n * 0x100 + 0xD4 4 Scanout source Y in 4.4 fixed point

SceIftuc0Reg, SceIftuc1Reg (control registers)

Offset Size Description
0x00 4 Control register. bit 0 = enable engine.
0x04 4 Plane control register. bit 0 = enable alpha blending, bit 2 = enable first plane, bit 4 = enable second plane.
0x10 4 RegA configuration selector: bit 0 = Use the first (offset 0x2XX) or second (offset 0x3XX) configuration
0x14 4 RegA unk
0x18 4 RegB configuration selector: bit 0 = Use the first (offset 0x2XX) or second (offset 0x3XX) configuration
0x1C 4 RegB unk
0x20 4 Blending control register. bit 1 = additive blending. bit 0 = subtractive blending.

Pixelformats

Format Value
BGR565 0x01
RGB565 0x02
BGRA5551 0x04
RGBA5551 0x08
BGRX8888 0x10
RGBX8888 0x20
BGRA1010102 0x40
RGBA1010102 0x80
BGRP 0x100
RGBX8888_MULT 0x1000
BGRX8888_MULT 0x2000
RGBA1010102_MULT 0x4000
RGBA1010102_MULT 0x8000
NV12 0x10000
YCBCR420 0x20000
YCBCR422 0x200000