Hardware Timers

The PSVita system embeds 8 Word timers (SceWT0 to SceWT7) and 6 Longrange timers (SceLT0 to SceLT5). The timers are counters incremented every ?microsecond?, can generate an interrupt when a certain value is reached or simply increase forever.

Most timers are managed by SceSystimer.

Available timers

The Address column indicates the physical address at which the interface for a timer is located.

Each timer interface takes 0x1000 bytes.

List of timers

Name	Address	Interrupt ID	Usage
SceLT0 / SceSystimerLongrangeTimer0	0xE20B1000	0x88	Available for SceSystimer
SceLT1 / SceSystimerLongrangeTimer1	0xE20B2000	0x89	Available for SceSystimer
SceLT2 / SceSystimerLongrangeTimer2	0xE20B3000	0x8A	Available for SceSystimer
SceLT3 / SceSystimerLongrangeTimer3	0xE20B4000	0x8B	Available for SceSystimer
SceLT4 / SceSystimerLongrangeTimer4	0xE20B5000	0x8C	Available for SceSystimer
SceLT5	0xE20B6000	0x8D	Used by SceKernelThreadMgr as CPU timer
SceWT0 / SceSystimerWordTimer0	0xE20B7000	0x80	Available for SceSystimer
SceWT1 / SceSystimerWordTimer1	0xE20B8000	0x81	Available for SceSystimer
SceWT2 / SceSystimerWordTimer2	0xE20B9000	0x82	Available for SceSystimer
SceWT3 / SceSystimerWordTimer3	0xE20BA000	0x83	Available for SceSystimer
SceWT4 / SceSystimerWordTimer4	0xE20BB000	0x84	Available for SceSystimer
SceWT5 / SceSystimerWordTimer5	0xE20BC000	0x85	Available for SceSystimer
SceWT6 / SceSystimerWordTimer6	0xE20BD000	0x86	Available for SceSystimer
SceWT7 / SceTimerForUsleep	0xE20BE000	0x87	Used by Tzs SceKernelIntrMgr for usleep - ?may be accessible in Secure state only?

Word Timers

Timers with 32-bit counters.

typedef volatile _SceWordTimer {
    SceUInt32 unk0; // Value at which an interrupt is triggered?
    SceUInt32 unk4; // Current value of the timer counter?
    SceUInt32 unk8; // Configuration register?
    SceUInt32 unkC; // Another counter?
    SceUInt32 unk10; // Unused?
    SceUInt32 unk14; // Write 0x3 to clear interrupt?
    
    // Unused?
    SceUInt32 unk18;
    SceUInt32 unk1C;
    SceUInt32 unk20;
} SceWordTimer;

Long Timers

Timers with 64-bit counters.

typedef volatile _SceLongTimer {
    SceKernelSysClock unk0;  // Current value of the timer counter?
    SceKernelSysClock unk8;  // Value at which an interrupt is triggered?
    SceKernelSysClock unk10; // Another counter?
    SceUInt32 unk18; // Write 0x3 to clear interrupts?
    SceUInt32 unk1C; // Configuration register?
    SceUInt32 unk20; // Unused
} SceLongTimer;

NOTE: on the PSVita CPU, 64-bit accesses are not guaranteed to be atomic. This can lead to issues when reading the timer if the low word of a counter is about to overflow. To ensure the readings from a timer are accurate, use code similar to the following code:

//Return value should hopefully be optimized into registers
SceKernelSysClock readCounter(volatile SceKernelSysClock* pTimerCounter) {
   SceKernelSysClock ctr;
   SceUInt32 ctrHi;
   do {
       ctr.hi = pTimeCounter->hi; //Read high word first
       ctr.lo = pTimeCounter->lo; //Read low word next
       ctrHi = pTimeCounter->hi;  //Read high word again to make sure no overflow happened
    } while (timerVal.hi != timerValHi); //Try again if high word changed while reading low word

    return ctr;
}

Configuration register

TODO

Bit 0x1 seems to be the "enable" bit