Ernie
Jump to navigation
Jump to search
Ernie is the codename for the Syscon chip. The Syscon is for exemple responsible for handling button input (including power button), reading/writing to non-volatile storage (NVS) for storing system flags (mostly encrypted and signed). For example IDU flag is stored in NVS. Syscon is also responsible for maintaining the physical address to the resume buffer during Suspend. Communication between Kermit and Syscon is mainly through SPI (see SceSyscon) but there are also some GPIO pins connecting the two. The chip model is NEC/Renesas uPD79F0109 and is likely custom designed for Sony.
Boot Process
The following is logged from boot. The timestamp is in seconds (the starting time is irrelevant). The arrow at the start indicates direction: '>' means Kermit to Syscon (MOSI) and '<' means Syscon to Kermit (MISO). Then there is a 2 byte command id or response code, followed by a flag byte (response only), the payload, a checksum byte, and an (response only) unknown byte. Please note that the packets are listed in transfer order but this may not represent the logical order of the packets. It is currently unknown what the logical order should be, but one can guess that a response is "close to" a request.
First some version information seems to be sent from Syscon to Kermit. This is same for cold boot and resume boot. The last response indicates the type of boot where 0xFF80 is resume and 0xFF14 is regular boot.
< [2.048118000000000] 0x0004, flags=00, payload=[0D 06 00 01 | ....], chk=0xE1, unk=0x00 > [2.048118000000000] 0x0001, payload=[ | ], chk=0xFD < [2.048659583333333] 0x0004, flags=00, payload=[00 60 40 00 | .`@.], chk=0x55, unk=0x00 > [2.048659583333333] 0x0005, payload=[ | ], chk=0xF9 < [2.049330083333333] 0x0004, flags=00, payload=[32 30 31 32 31 31 30 38 31 37 30 34 | 201211081704], chk=0x92, unk=0x00 > [2.049330083333333] 0x0002, payload=[ | ], chk=0xFC < [2.054004333333333] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x30 > [2.054004333333333] 0x0080, payload=[12 00 | ..], chk=0x6A < [2.058172916666666] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x30 > [2.058172916666666] 0x0000, payload=[ | ], chk=0xFE < [2.062716333333333] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x30 > [2.062716333333333] 0x0080, payload=[12 00 | ..], chk=0x6A < [2.111457750000000] 0x0004, flags=00, payload=[14 FF | ..], chk=0xE4, unk=0x32
Next some encrypted session is established. A 8 byte nonce is sent from Syscon (it appears random for each boot, cold or warm). Encrypted data from this point on always differs each boot.
> [2.111457750000000] 0x0010, payload=[ | ], chk=0xEE < [2.133389000000000] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0xFF > [2.133389000000000] 0x00A0, payload=[30 00 00 0B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0.......................................], chk=0xFB < [2.150567250000000] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0xFF > [2.150567250000000] 0x0000, payload=[ | ], chk=0xFE < [2.155149500000000] 0x0024, flags=00, payload=[30 01 00 0B 00 00 00 00 A4 B0 EF 23 D6 9A 3A 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0..........#..:.........................], chk=0x5F, unk=0x00 > [2.155149500000000] 0x00A0, payload=[30 00 00 0B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0.......................................], chk=0xFB < [2.163572000000000] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x01 > [2.163572000000000] 0x00A0, payload=[30 02 00 0B 01 00 00 00 6C 7F E0 79 AA 03 4B B0 96 B7 42 F0 BC F8 62 7A 35 27 53 68 3D 0D ED A7 13 F2 32 77 46 2D 54 F8 | 0.......l..y..K...B...bz5'Sh=.....2wF-T.], chk=0x9B < [2.189271166666667] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x01 > [2.189271166666667] 0x0000, payload=[ | ], chk=0xFE < [2.193866583333334] 0x0024, flags=00, payload=[30 03 00 0B 00 00 00 00 7A 44 6E C8 F5 FA 35 CB 9B E9 E6 A0 B6 5C 85 1D FB A8 89 5C 9C 04 0B 29 34 59 55 EB 1D 98 AB 83 | 0.......zDn...5......\.....\...)4YU.....], chk=0xC6, unk=0x00 > [2.193866583333334] 0x00A0, payload=[30 02 00 0B 01 00 00 00 6C 7F E0 79 AA 03 4B B0 96 B7 42 F0 BC F8 62 7A 35 27 53 68 3D 0D ED A7 13 F2 32 77 46 2D 54 F8 | 0.......l..y..K...B...bz5'Sh=.....2wF-T.], chk=0x9B
Some more data is exchanged. Up until this point all the plaintext payloads appear to be the same from coldboot and warmboot.
< [2.202246333333334] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x03 > [2.202246333333334] 0x088E, payload=[01 22 | ."], chk=0x43 < [2.206411750000000] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x03 > [2.206411750000000] 0x0000, payload=[ | ], chk=0xFE < [2.217062666666667] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x03 > [2.217062666666667] 0x0000, payload=[ | ], chk=0xFE < [2.221620916666667] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x03 > [2.221620916666667] 0x088E, payload=[01 22 | ."], chk=0x43 < [2.229805500000000] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x03 > [2.229805500000000] 0x1082, payload=[80 04 08 | ...], chk=0xDD < [2.233887583333333] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x03 > [2.233887583333333] 0x0000, payload=[ | ], chk=0xFE < [2.238363416666667] 0x0024, flags=00, payload=[FF FF FF FF 01 FF FF FF | ........], chk=0xD7, unk=0x44 > [2.238363416666667] 0x1082, payload=[80 04 08 | ...], chk=0xDD < [2.246473916666667] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0xFF
Now, there appears to be a branch. The next sequence only shows up for cold boots.
> [2.246473916666667] 0x1082, payload=[A0 04 01 | ...], chk=0xC4
< [2.250555000000000] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0xFF
> [2.250555000000000] 0x0000, payload=[ | ], chk=0xFE
< [2.255030833333334] 0x0024, flags=00, payload=[FF | .], chk=0xD9, unk=0x00
> [2.255030833333334] 0x1082, payload=[A0 04 01 | ...], chk=0xC4
< [2.259176583333333] 0x0004, flags=00, payload=[01 01 13 00 | ....], chk=0xE0, unk=0xFF
> [2.259176583333333] 0x1100, payload=[ | ], chk=0xED
< [2.263720583333333] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x01
> [2.263720583333333] 0x00D0, payload=[30 00 00 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0.......................................], chk=0xC7
< [2.267827000000000] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x01
> [2.267827000000000] 0x0000, payload=[ | ], chk=0xFE
< [2.278339666666667] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x01
> [2.278339666666667] 0x0000, payload=[ | ], chk=0xFE
< [2.282830833333333] 0x0024, flags=00, payload=[30 01 00 0F 00 00 00 00 E1 CA 65 96 BB 7E 81 7A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0.........e..~.z........................], chk=0x97, unk=0x00
> [2.282830833333333] 0x00D0, payload=[30 00 00 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0.......................................], chk=0xC7
< [2.291023500000000] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x01
> [2.291023500000000] 0x00D0, payload=[30 02 00 0F 01 00 00 00 4E D7 C0 7C D5 E8 BB D7 3E 9E 43 7B B2 E3 4D 81 23 C8 C4 BF B8 4D 9B 25 0A 3D C7 45 E6 0D 23 43 | 0.......N..|....>.C{..M.#....M.%.=.E..#C], chk=0x38
< [2.295129250000000] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x01
> [2.295129250000000] 0x0000, payload=[ | ], chk=0xFE
< [2.305641750000000] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x01
> [2.305641750000000] 0x0000, payload=[ | ], chk=0xFE
< [2.310132916666667] 0x0024, flags=00, payload=[30 03 00 0F 00 00 00 00 5B 3E 5C 5F 11 F9 E4 6A 85 0D 1E 06 9E F9 33 25 9B 95 55 21 39 48 FC 55 C7 BF A7 E4 32 AD FC 65 | 0.......[>\_...j......3%..U!9H.U....2..e], chk=0x55, unk=0x00
> [2.310132916666667] 0x00D0, payload=[30 02 00 0F 01 00 00 00 4E D7 C0 7C D5 E8 BB D7 3E 9E 43 7B B2 E3 4D 81 23 C8 C4 BF B8 4D 9B 25 0A 3D C7 45 E6 0D 23 43 | 0.......N..|....>.C{..M.#....M.%.=.E..#C], chk=0x38
< [2.318358166666667] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x03
> [2.318358166666667] 0x00D0, payload=[30 04 00 0F 00 00 00 00 52 8D 6D BC 90 C9 00 EE FA CA 47 63 10 D1 4A E5 5A FD BB 91 3A 6C DA EF 64 CA 71 01 4A A9 D5 31 | 0.......R.m.......Gc..J.Z...:l..d.q.J..1], chk=0x4B
< [2.322464250000000] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x03
> [2.322464250000000] 0x0000, payload=[ | ], chk=0xFE
< [2.332976833333333] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x03
> [2.332976833333333] 0x0000, payload=[ | ], chk=0xFE
< [2.337468000000000] 0x0024, flags=00, payload=[30 05 00 0F 00 00 00 00 52 8D 6D BC 90 C9 00 EE FA CA 47 63 10 D1 4A E5 5A FD BB 91 3A 6C DA EF 64 CA 71 01 4A A9 D5 31 | 0.......R.m.......Gc..J.Z...:l..d.q.J..1], chk=0xF5, unk=0x00
> [2.337468000000000] 0x00D0, payload=[30 04 00 0F 00 00 00 00 52 8D 6D BC 90 C9 00 EE FA CA 47 63 10 D1 4A E5 5A FD BB 91 3A 6C DA EF 64 CA 71 01 4A A9 D5 31 | 0.......R.m.......Gc..J.Z...:l..d.q.J..1], chk=0x4B
< [2.345696333333333] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x05
Then another set of shared sequence. Some differences in the warmboot responses though. On line 18,
FF BF FF 74
becomes
FF FF FF 74
. On line 12, the
00 00 00 00
becomes the address of the resume buffer (ex
F0 1E 1F 41
).
> [2.345696333333333] 0x00D2, payload=[20 7A 3E 7B 31 DE FC 3A 11 5F 64 E7 AB A4 EC 17 | .z>{1..:._d.....], chk=0x77
< [2.349790333333333] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x05
> [2.349790333333333] 0x0000, payload=[ | ], chk=0xFE
< [2.360448916666666] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x05
> [2.360448916666666] 0x0000, payload=[ | ], chk=0xFE
< [2.364930250000000] 0x0024, flags=00, payload=[9D 0B BC 4D BA 66 40 2C 63 BE F3 79 D0 31 26 1E 47 3A 64 DE 68 2F AE E2 8A B6 F0 27 37 46 89 16 0E 71 04 FA BF C9 4A A1 DF 4B EF D3 3D 0D 39 CD | ...M.f@,c..y.1&.G:d.h/.....'7F...q....J..K..=.9.], chk=0x11, unk=0x00
> [2.364930250000000] 0x00D2, payload=[20 7A 3E 7B 31 DE FC 3A 11 5F 64 E7 AB A4 EC 17 | .z>{1..:._d.....], chk=0x77
< [2.373236666666667] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x0B
> [2.373236666666667] 0x0090, payload=[0C 00 04 | ...], chk=0x5B
< [2.377318583333333] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x0B
> [2.377318583333333] 0x0000, payload=[ | ], chk=0xFE
< [2.381794416666667] 0x0024, flags=00, payload=[00 00 00 00 | ....], chk=0xD5, unk=0x66
> [2.381794416666667] 0x0090, payload=[0C 00 04 | ...], chk=0x5B
< [2.385879750000000] 0x0004, flags=00, payload=[40 00 | @.], chk=0xB7, unk=0x00
> [2.385879750000000] 0x0800, payload=[ | ], chk=0xF6
< [2.386382583333333] 0x0004, flags=00, payload=[FF BF FF 74 | ...t], chk=0xC4, unk=0x66
> [2.386382583333333] 0x0100, payload=[ | ], chk=0xFD
< [2.386871833333333] 0x0004, flags=00, payload=[10 00 00 00 | ....], chk=0xE5, unk=0x66
> [2.386871833333333] 0x0003, payload=[ | ], chk=0xFB
< [2.387380083333333] 0x0000, flags=3F, payload=[ | ], chk=0xBE, unk=0x00
> [2.387380083333333] 0x0006, payload=[ | ], chk=0xF8
< [2.481997666666667] 0x0000, flags=80, payload=[ | ], chk=0x7D, unk=0x00
> [2.481986333333333] 0x00D2, payload=[30 14 F4 B8 84 89 81 AB 3D 07 66 DE AE B6 D3 24 | 0.......=.f....$], chk=0x10
< [2.514678500000000] 0x0020, flags=00, payload=[ | ], chk=0xDD, unk=0x00
> [2.514678500000000] 0x0000, payload=[ | ], chk=0xFE
< [2.519163916666667] 0x0020, flags=00, payload=[1A 1F BC 74 AA 16 59 D6 5C E7 FF 5B E0 85 B2 C8 39 2D D6 95 98 2F B7 4B 71 64 34 D7 8D 2C 94 A1 91 CB 73 D7 8D E1 D0 07 E6 1E 0F DA E7 51 BC 69 | ...t..Y.\..[....9-.../.Kqd4..,....s..........Q.i], chk=0x3C, unk=0x00
> [2.519163916666667] 0x00D2, payload=[30 14 F4 B8 84 89 81 AB 3D 07 66 DE AE B6 D3 24 | 0.......=.f....$], chk=0x10
< [2.527551416666667] 0x0000, flags=80, payload=[ | ], chk=0x7D, unk=0x1F
> [2.527540083333333] 0x088E, payload=[02 29 | .)], chk=0x3B
< [2.531619416666667] 0x0000, flags=00, payload=[ | ], chk=0xFD, unk=0x1F
> [2.531619416666667] 0x0000, payload=[ | ], chk=0xFE
< [2.542392416666666] 0x0020, flags=00, payload=[ | ], chk=0xDD, unk=0x1F
> [2.542392416666666] 0x0000, payload=[ | ], chk=0xFE
< [2.546867583333333] 0x0020, flags=00, payload=[ | ], chk=0xDD, unk=0x1F
> [2.546867583333333] 0x088E, payload=[02 29 | .)], chk=0x3B
Then, the two boot paths diverge completely (also note the time jump). It is suspected that at this point the kernel is started up on coldboot, and the kernel resumes for warmboot. For cold boot only, we see the beginning init sequence again, which is likely done in SceSyscon.
< [3.322105750000000] 0x0000, flags=00, payload=[0D 06 00 01 | ....], chk=0xE5, unk=0x16 > [3.322105750000000] 0x0001, payload=[ | ], chk=0xFD < [3.326563916666667] 0x0000, flags=00, payload=[32 30 31 32 31 31 30 38 31 37 30 34 | 201211081704], chk=0x96, unk=0x85 > [3.326552583333333] 0x0002, payload=[ | ], chk=0xFC < [3.331090666666667] 0x0000, flags=80, payload=[ | ], chk=0x7D, unk=0x30 > [3.331079333333333] 0x0080, payload=[12 00 | ..], chk=0x6A < [3.331576333333333] 0x0020, flags=00, payload=[ | ], chk=0xDD, unk=0x30 > [3.331576333333333] 0x0080, payload=[12 00 | ..], chk=0x6A < [3.332068833333333] 0x0000, flags=00, payload=[10 00 00 00 | ....], chk=0xE9, unk=0x31 > [3.332068833333333] 0x0004, payload=[ | ], chk=0xFA < [3.332541666666667] 0x0000, flags=00, payload=[00 FF 04 00 | ....], chk=0xF6, unk=0x31 > [3.332541666666667] 0x0103, payload=[ | ], chk=0xFA < [3.336980333333333] 0x0000, flags=00, payload=[10 00 00 00 | ....], chk=0xE9, unk=0x31 > [3.336980333333333] 0x0003, payload=[ | ], chk=0xFB ...
Packet checksum
The checksum byte of the packet is calculated as the binary negation of the sum of the packet (including the 2 bytes of the command id and the byte for the length). The checksum calculation can be implemented as follows:
void syscon_calc_checksum(unsigned char packet[32], int length)
{
int i;
unsigned char hash = 0;
for (i = 0; i < 3 + length; i++)
hash += packet[i];
packet[3 + length] = ~hash;
}
Commands
Commands are listed in the order seen in cold boot. The numbers in the captured packets indicate the assumed order with some unused packets filtered out (they appear to be resent). The ordering and grouping are assumed and may contain errors.
CMD 0x0001
Gets some device specific version. Maybe chipset revision? Can also be seen in the packet header in Syscon Update. Also sent at kernel boot.
SEND 1 > [2.881037083333333] 0x0001, payload=[ | ], chk=0xFD RESP 1 < [2.881037083333333] 0x0004, flags=00, payload=[0D 06 00 01 | ....], chk=0xE1, unk=0x71
SEND 23 > [4.167151583333333] 0x0001, payload=[ | ], chk=0xFD RESP 23 < [4.167151583333333] 0x0000, flags=00, payload=[0D 06 00 01 | ....], chk=0xE5, unk=0x32
CMD 0x0005 - Get Hardware Configuration
Gets Hardware Configuration. Can be obtained using sceSysconGetHardwareInfoForDriver or sceSysconGetHardwareInfo2ForDriver.
Can also be seen in the packet header in Syscon Update.
SEND 2 > [2.881578833333333] 0x0005, payload=[ | ], chk=0xF9 RESP 2 < [2.881578833333333] 0x0004, flags=00, payload=[00 60 40 00 | .`@.], chk=0x55, unk=0x71
CMD 0x0002
Gets syscon version string. Likely refers to hardware version. Also sent at kernel boot.
SEND 3 > [2.882249083333333] 0x0002, payload=[ | ], chk=0xFC RESP 3 < [2.882249083333333] 0x0004, flags=00, payload=[32 30 31 32 31 31 30 38 31 37 30 34 | 201211081704], chk=0x92, unk=0x00
SEND 24 > [4.171598000000000] 0x0002, payload=[ | ], chk=0xFC RESP 24 < [4.171598000000000] 0x0000, flags=00, payload=[32 30 31 32 31 31 30 38 31 37 30 34 | 201211081704], chk=0x96, unk=0xF7
CMD 0x0080
Unknown. Sends data 0x0012 on 3.60. Does not get return data. Also sent at kernel boot.
SEND 4 > [2.895635416666666] 0x0080, payload=[12 00 | ..], chk=0x6A RESP 4 < [2.886923416666667] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x30 RESP 4 < [2.891092083333333] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x30 RESP 4 < [2.895635416666666] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x30
SEND 25 > [4.176620750000000] 0x0080, payload=[12 00 | ..], chk=0x6A RESP 25 < [4.176123750000000] 0x0000, flags=80, payload=[ | ], chk=0x7D, unk=0x30 RESP 25 < [4.176620750000000] 0x0020, flags=00, payload=[ | ], chk=0xDD, unk=0x30
CMD 0x0010
Boot type indicator. 0xFF14 on cold boot. 0xFF80 on resume boot.
SEND 5 > [2.950546416666667] 0x0010, payload=[ | ], chk=0xEE RESP 5 < [2.950546416666667] 0x0004, flags=00, payload=[14 FF | ..], chk=0xE4, unk=0x32
CMD 0x00A0
Runs twice. Appears to contain a 8 byte inner header. First packet sends all zeros and gets back a 8 byte random response. This is likely a nonce or challenge. This likely establishes an encrypted session. Encrypted data differs on each boot. There does not appear to be data transferred using the established session.
SEND 6 > [2.994470666666667] 0x00A0, payload=[30 00 00 0B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0.......................................], chk=0xFB RESP 6 < [2.972471333333333] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0xFF RESP 6 < [2.989889500000000] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0xFF RESP 6 < [2.994470666666667] 0x0024, flags=00, payload=[30 01 00 0B 00 00 00 00 CA 71 11 BA 86 87 EF 0D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0........q..............................], chk=0x66, unk=0x00 SEND 7 > [3.033187750000000] 0x00A0, payload=[30 02 00 0B 01 00 00 00 92 45 B4 A5 49 15 CE F2 39 0E 9E 4C BF FA 19 E6 5D CF BA 5A 6E C3 7C ED 2A 6D 4E 79 84 28 1C 2A | 0........E..I...9..L....]..Zn.|.*mNy.(.*], chk=0x97 RESP 7 < [3.002893083333333] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x01 RESP 7 < [3.028592333333334] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x01 RESP 7 < [3.033187750000000] 0x0024, flags=00, payload=[30 03 00 0B 00 00 00 00 12 77 A5 98 67 F7 38 9B B4 54 48 FE 84 82 CF 84 41 42 87 A2 EA D1 CF 9C 5B D1 2A 3F 1E 50 B9 3D | 0........w..g.8..TH.....AB......[.*?.P.=], chk=0x0A, unk=0x00
CMD 0x088E
Unknown. Sends data 0x2201 on 3.60 and does not get a response.
SEND 8 > [3.061354583333333] 0x088E, payload=[01 22 | ."], chk=0x43 RESP 8 < [3.041713500000000] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x03 RESP 8 < [3.046148250000000] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x03 RESP 8 < [3.056796250000000] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x03 RESP 8 < [3.061354583333333] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x03
CMD 0x1082
Unknown. Seems to get data from NVM? Looks like 2-byte index/offset followed by 1 byte length. Could be used to fetch boot-time flags or something.
SEND 9 > [3.078212500000000] 0x1082, payload=[80 04 08 | ...], chk=0xDD RESP 9 < [3.069790250000000] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x03 RESP 9 < [3.073736583333333] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x03 RESP 9 < [3.078212500000000] 0x0024, flags=00, payload=[FF FF FF FF 01 FF FF FF | ........], chk=0xD7, unk=0x77 SEND 10 > [3.094879833333333] 0x1082, payload=[A0 04 01 | ...], chk=0xC4 RESP 10 < [3.086322916666667] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0xFF RESP 10 < [3.090404000000000] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0xFF RESP 10 < [3.094879833333333] 0x0024, flags=00, payload=[FF | .], chk=0xD9, unk=0x00
CMD 0x1100
Unknown. Could be syscon firmware version.
SEND 11 > [3.099025500000000] 0x1100, payload=[ | ], chk=0xED RESP 11 < [3.099025500000000] 0x0004, flags=00, payload=[01 01 13 00 | ....], chk=0xE0, unk=0xFF
CMD 0x00D0
Some encrypted transfer that looks close to Syscon#CMD 0x00A0 in format. Different on each boot.
SEND 12 > [3.122679833333333] 0x00D0, payload=[30 00 00 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0.......................................], chk=0xC7 RESP 12 < [3.103569583333333] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x01 RESP 12 < [3.107676166666667] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x01 RESP 12 < [3.118188666666667] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x01 RESP 12 < [3.122679833333333] 0x0024, flags=00, payload=[30 01 00 0F 00 00 00 00 9F CC 4A 69 73 E9 C0 5A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | 0.........Jis..Z........................], chk=0xDD, unk=0x00 SEND 13 > [3.150031916666667] 0x00D0, payload=[30 02 00 0F 01 00 00 00 98 6D 3A 1E C5 B1 E9 AF 54 65 55 91 3B DF 2B A8 0F AD B0 73 A0 A2 0F EE 5D 0A AF 41 A5 6D 32 20 | 0........m:.....TeU.;.+....s....]..A.m2.], chk=0xF4 RESP 13 < [3.130872500000000] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x01 RESP 13 < [3.134978166666667] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x01 RESP 13 < [3.145539833333333] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x01 RESP 13 < [3.150031916666667] 0x0024, flags=00, payload=[30 03 00 0F 00 00 00 00 F5 19 C0 67 09 80 C6 DB 58 8D FB E1 86 22 D1 00 DA BB D2 AF AA 51 F9 57 7C 56 92 0A 94 D6 60 4D | 0..........g....X....".......Q.W|V....`M], chk=0xF0, unk=0x00 SEND 14 > [3.177452416666667] 0x00D0, payload=[30 04 00 0F 00 00 00 00 87 4E 59 41 22 98 F8 62 BD B4 C8 4F 4C 0A 81 90 47 1E 1E 70 D6 51 57 42 E5 EC 07 A2 D4 CF E5 02 | 0........NYA"..b...OL...G..p.QWB........], chk=0x9A RESP 14 < [3.158257166666667] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x03 RESP 14 < [3.162363250000000] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x03 RESP 14 < [3.172875666666667] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x03 RESP 14 < [3.177452416666667] 0x0024, flags=00, payload=[30 05 00 0F 00 00 00 00 87 4E 59 41 22 98 F8 62 BD B4 C8 4F 4C 0A 81 90 47 1E 1E 70 D6 51 57 42 E5 EC 07 A2 D4 CF E5 02 | 0........NYA"..b...OL...G..p.QWB........], chk=0x44, unk=0x00
CMD 0x00D2
This command is used twice during boot and also quite often after boot. Data is different on each boot. Encrypted session using key from handshake above. Second transaction seems to be the firmware version data written during the update process. Likely firmware version check is done here.
SEND 15 > [3.204733083333333] 0x00D2, payload=[32 78 88 CF 3E 63 56 19 75 3A 0A 2D F3 49 63 E2 | 2x..>cV.u:.-.Ic.], chk=0xA4 RESP 15 < [3.185595250000000] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x05 RESP 15 < [3.189740333333333] 0x0004, flags=00, payload=[ | ], chk=0xF9, unk=0x05 RESP 15 < [3.200251666666666] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x05 RESP 15 < [3.204733083333333] 0x0024, flags=00, payload=[D3 57 9B F2 A2 45 E2 7A 2A FC 84 12 97 8E 23 5F C8 AB FB 58 97 EC DE 20 94 0A 78 28 C6 EE C5 45 18 29 00 F4 56 22 53 AF 24 47 8E FF B1 5C DA 2F | .W...E.z*.....#_...X......x(...E.)..V"S.$G...\./], chk=0x4C, unk=0xFF
SEND 21 > [3.359112250000000] 0x00D2, payload=[1C 0B 9E FF FB 68 90 4B FD C2 05 CD D8 67 4D D0 | .....h.K.....gM.], chk=0x2D RESP 21 < [3.321934500000000] 0x0000, flags=80, payload=[ | ], chk=0x7D, unk=0x00 RESP 21 < [3.354626666666667] 0x0020, flags=00, payload=[ | ], chk=0xDD, unk=0x00 RESP 21 < [3.359112250000000] 0x0020, flags=00, payload=[6C B4 26 F3 CD 32 D3 3E 6F 80 F2 0F 68 F7 E2 96 58 DB 2F BB AB A6 98 DD 26 14 DD 61 12 E4 55 BA BB 32 1D 1F 75 D5 D1 4C 7E 4A 19 42 E5 B0 C6 AB | l.&..2.>o...h...X./.....&..a..U..2..u..L~J.B....], chk=0x84, unk=0xFF
CMD 0x0090
This fetches the saved resume buffer paddr. Kernel sets this before suspending and this value is passed to the resume function. See Suspend. The format is 2 byte index and 1 byte length. There are likely other data stored at other indexes.
SEND 16 > [3.221743166666667] 0x0090, payload=[0C 00 04 | ...], chk=0x5B RESP 16 < [3.213273166666667] 0x0004, flags=80, payload=[ | ], chk=0x79, unk=0x57 RESP 16 < [3.217267333333333] 0x0024, flags=00, payload=[ | ], chk=0xD9, unk=0x57 RESP 16 < [3.221743166666667] 0x0024, flags=00, payload=[F0 0E 1F 41 | ...A], chk=0x77, unk=0x45
CMD 0x0800
Unknown.
SEND 17 > [3.225828583333334] 0x0800, payload=[ | ], chk=0xF6 RESP 17 < [3.225828583333334] 0x0004, flags=00, payload=[40 00 | @.], chk=0xB7, unk=0x41
CMD 0x0100
Unknown. Likely related to indicating if this is a cold or warm boot. On warm boot, the data returned is FF FF FF 74.
SEND 18 > [3.226331500000000] 0x0100, payload=[ | ], chk=0xFD RESP 18 < [3.226331500000000] 0x0004, flags=00, payload=[FF BF FF 74 | ...t], chk=0xC4, unk=0x45
CMD 0x0003
Unknown.
SEND 19 > [3.226820750000000] 0x0003, payload=[ | ], chk=0xFB RESP 19 < [3.226820750000000] 0x0004, flags=00, payload=[10 00 00 00 | ....], chk=0xE5, unk=0x45
CMD 0x0006
Unknown.
SEND 20 > [3.227328833333333] 0x0006, payload=[ | ], chk=0xF8 RESP 20 < [3.227328833333333] 0x0000, flags=3F, payload=[ | ], chk=0xBE, unk=0x00
CMD 0x088E
Unknown. Appears to be the last command sent before a time-jump (likely indicating completion of early-boot). Might be some status indicator to tell Syscon that we're done.
SEND 22 > [3.386554833333333] 0x088E, payload=[02 29 | .)], chk=0x3B RESP 22 < [3.367488416666667] 0x0000, flags=80, payload=[ | ], chk=0x7D, unk=0xB4 RESP 22 < [3.371567833333333] 0x0000, flags=00, payload=[ | ], chk=0xFD, unk=0xB4 RESP 22 < [3.382079833333334] 0x0020, flags=00, payload=[ | ], chk=0xDD, unk=0xB4 RESP 22 < [3.386554833333333] 0x0020, flags=00, payload=[ | ], chk=0xDD, unk=0xB4
CMD 0x0004
Unknown. Likely happens after initial boot.
SEND 26 > [4.177113250000000] 0x0004, payload=[ | ], chk=0xFA RESP 26 < [4.177113250000000] 0x0000, flags=00, payload=[10 00 00 00 | ....], chk=0xE9, unk=0x31
CMD 0x0103
Unknown. Likely happens after initial boot. Might be get Wakeup factor.
SEND 27 > [4.177586083333333] 0x0103, payload=[ | ], chk=0xFA RESP 27 < [4.177586083333333] 0x0000, flags=00, payload=[00 FF 04 00 | ....], chk=0xF6, unk=0x31