Difference between revisions of "DSI Registers"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 20: | Line 20: | ||
! Description | ! Description | ||
|- | |- | ||
| − | | rowspan= | + | | rowspan=20 style="text-align: center;" | RGB output |
| 0x004 | | 0x004 | ||
| 4 | | 4 | ||
| Line 76: | Line 76: | ||
| 4 | | 4 | ||
| bits[28:16]: <code>((vtotal + 1) >> 1) + (VSW + VBP) - 8</code>, bits[15:0]: <code>(VSW + VBP) - 8</code> | | bits[28:16]: <code>((vtotal + 1) >> 1) + (VSW + VBP) - 8</code>, bits[15:0]: <code>(VSW + VBP) - 8</code> | ||
| + | |- | ||
| + | | 0x048 | ||
| + | | 4 | ||
| + | | bits[7:0]: pending interrupts or some counter ?? | ||
|- | |- | ||
| 0x04C | | 0x04C | ||
Revision as of 13:56, 13 July 2019
MMIO Interfaces
| Name | Physical address |
|---|---|
| SceDsi0Reg | 0xE5050000 |
| SceDsi1Reg | 0xE5060000 |
Registers
| Engine | Offset | Size | Description | |||
|---|---|---|---|---|---|---|
| RGB output | 0x004 | 4 | bits[1:0]: Video mode (0 = Progressive, 0b11 = Interlaced) | |||
| 0x008 | 4 | bits[31:0]: (htotal * clocks_per_pixel) >> 1
| ||||
| 0x00C | 4 | bits[28:16]: vtotal, bits[12:0]: (vtotal + 1) >> 1
| ||||
| 0x010 | 4 | bits[31:0]: 0x10001
| ||||
| 0x014 | 4 | bits[31:16]: ((HSW + HBP) * clocks_per_pixel) >> 1, bits[15:0]: (((HSW + HBP + hact) * clocks_per_pixel) >> 1) + 1
| ||||
| 0x01C | 4 | bits[28:16]: VSW + VBP - 1, bits[12:0]: ((vtotal + 1) >> 1) - VFP
| ||||
| 0x020 | 4 | bits[28:16]: VSW + VBP + ((vtotal - 1) >> 1), bits[12:0]: vtotal - VFP + 1
| ||||
| 0x024 | 4 | bits[31:16]: (HSW * clocks_per_pixel) >> 1, bit[0]: 1
| ||||
| 0x02C | 4 | bits[31:0]: 0x10001
| ||||
| 0x030 | 4 | bits[28:16]: VSW, bits[15:0]: (htotal * clocks_per_pixel) >> 1
| ||||
| 0x034 | 4 | bits[28:16]: (vtotal + 1) >> 1, bits[15:0]: ((htotal * clocks_per_pixel) >> 2) + 1
| ||||
| 0x038 | 4 | bits[28:16]: VSW + ((vtotal + 1) >> 1), bits[15:0]: (htotal * clocks_per_pixel) >> 2
| ||||
| 0x03C | 4 | bits[31:0]: 1
| ||||
| 0x040 | 4 | bits[28:16]: ((vtotal + 1) >> 1) + (VSW + VBP) - 8, bits[15:0]: (VSW + VBP) - 8
| ||||
| 0x048 | 4 | bits[7:0]: pending interrupts or some counter ?? | ||||
| 0x04C | 4 | bits[31:16]: current Vcount, bits[15:0]: ??
| ||||
| 0x050 | 4 | Interrupts ack/clear (read = triggered interrupts, write = clear interrupt) | ||||
| 0x054 | 4 | Interrupt enable mask (bit 1 = some interrupt) | ||||
| 0x05C | 4 |
| ||||
| 0x060 | 4 |
| ||||
| RGB-to-DSI PHY Rx | 0x410 | 4 | DSI_STATUS. DSI Command read FIFO status (bit 5 = Read FIFO empty) | |||
| 0x414 | 4 | DSI_INT. Some sort of status. Ready/busy? | ||||
| 0x430 | 4 | DSICMD_RXFIFO. DSI Command read FIFO | ||||
| RGB-to-DSI PHY Tx | 0x500 | 4 | DSI_CONFW?. DSI Command FIFO | |||
| 0x504 | 4 | DSI_RESET?. DSI Command FIFO packet size (in multiples of 32b) | ||||
| 0x508 | 4 | |||||
| 0x50C | 4 | DSI_INT_CLR | ||||
| 0x510 | 4 | Another command FIFO (used to write the packet for command reads) | ||||
| 0x51C | 4 | Transfer control. bit[0]: Transfer direction (0 = read, 1 = write). Seems to be some kind of SPI/I2C interface | ||||
| Clocking | 0x804 | 4 | ||||
| 0x810 | 4 | |||||
| 0x814 | 4 | |||||
| 0x818 | 4 | |||||
| 0x81C | 4 | |||||
| 0x820 | 4 | |||||
| 0x824 | 4 | |||||
| 0x828 | 4 | |||||
| 0x82C | 4 | |||||
| 0x830 | 4 | |||||
| 0x834 | 4 | |||||
| 0x838 | 4 | DSI auto clock configuration (1 = only HS clock, 0 = auto gate when data in LP) | ||||
| 0x83C | 4 | |||||
| 0x900 | 4 | |||||
| 0x904 | 4 | |||||
| 0x908 | 4 | |||||
| 0x90C | 4 | |||||
| 0x940 | 4 | |||||
| 0x944 | 4 | |||||
| 0x948 | 4 | |||||
| 0x94C | 4 |