GPIO Registers
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
MMIO Interfaces
Name | Physical address |
---|---|
SceGpio0Reg | 0xE20A0000 |
SceGpio1Reg | 0xE0100000 |
Registers
Offset | Size | Description |
---|---|---|
0x00 | 4 | Port mode (1=out, 0=in) (1 bit each port) |
0x04 | 4 | Port read (0=low, 1=high) (1 bit each port) |
0x08 | 4 | Port set (1 bit each port) |
0x0C | 4 | Port clear (1 bit each port) |
0x10 | 4 | Port enable? (1 bit each port) |
0x14 | 4 | Interrupt mode (2 bits each port) for interrupts 0-15 |
0x18 | 4 | Interrupt mode (2 bits each port) for interrupts 16-31 |
0x1C | 4 | Gate 0 interrupts mask (disable) (1 bit each port) |
0x20 | 4 | Gate 1 interrupts mask (disable) (1 bit each port) |
0x24 | 4 | Gate 2 interrupts mask (disable) (1 bit each port) |
0x28 | 4 | Gate 3 interrupts mask (disable) (1 bit each port) |
0x2C | 4 | Gate 4 interrupts mask (disable) (1 bit each port) |
0x34 | 4 | Port read latched? (0=low, 1=high?) (1 bit each port). Used to read when port is configured as output. |
0x38 | 4 | Gate 0 interrupts status/clear (1 bit each port) |
0x3C | 4 | Gate 1 interrupts status/clear (1 bit each port) |
0x40 | 4 | Gate 2 interrupts status/clear (1 bit each port) |
0x44 | 4 | Gate 3 interrupts status/clear (1 bit each port) |
0x48 | 4 | Gate 4 interrupts status/clear (1 bit each port) |
Each of the 5 gates correspond to the 5 GpioGate[i]
Interrupt IDs in Interrupts#Registered_Interrupts.
Interrupt mode bits
Value | Mode |
---|---|
0 | High level-sensing mode |
1 | Low level-sensing mode |
2 | Rising edge detection mode |
3 | Falling edge detection mode |
GPIO Bus 0 ports
Port | Description |
---|---|
0 | OLED/LCD |
1 | unk |
2 | unk |
3 | Syscon related (output) |
4 | Syscon related (input) |
5 | UDCD (USB Device Controller Driver) related |
6 | Game Card reader LED |
7 | PS Button Blue LED (only blue ?? no red?) |
8 | unk |
9 | Camera |
10 | unk. Used in 0.996 SceEnumWakeUp and in SceCamera. |
11 | unk. Used in 0.996 SceEnumWakeUp and in SceCamera. |
12 | UDCD (USB Device Controller Driver) related |
13 | HDMI related (input) |
14 | unk |
15 | HDMI related (output) |
16 | GPO 0 (General Purpose Output - DevKit LED 0) |
17 | GPO 1 (General Purpose Output - DevKit LED 1) |
18 | GPO 2 (General Purpose Output - DevKit LED 2) |
19 | GPO 3 (General Purpose Output - DevKit LED 3) |
20 | GPO 4 (General Purpose Output - DevKit LED 4) |
21 | GPO 5 (General Purpose Output - DevKit LED 5) |
22 | GPO 6 (General Purpose Output - DevKit LED 6) |
23 | GPO 7 (General Purpose Output - DevKit LED 7) |
24 | UDCD (USB Device Controller Driver) related |
25 | unk |
26 | unk |
27 | Motion related |
28 | Motion related |
29 | SDIF related |
30 | 3G Modem related |
31 | unk |
GPIO Bus 1 ports
Port | Description |
---|---|
7 | LCD related. Backlight? |
Interrupt mode used by PSVita OS
Bus | Port | Interrupt mode | Description |
---|---|---|---|
0 | 4 | 3 | Syscon input |