IFTU Registers

From Vita Development Wiki
Jump to navigation Jump to search

MMIO Interfaces

Name Physical address
SceIftu0RegA (OLED FB) 0xE5020000
SceIftu0RegB 0xE5021000
SceIftuc0Reg 0xE5022000
SceIftu1RegA (HDMI FB) 0xE5030000
SceIftu1RegB 0xE5031000
SceIftuc1Reg 0xE5032000
SceIftu2Reg 0xE5040000

Registers

IftuRegs

Offset Size Description
0x000 4 Control register: bit 0 = enable?, bit 2 = ??, bit 3 = ??
0x004 4 CRTC mask: bit 0 = enable scanout to engine/CRTC of OLED/LCD, bit 1 = enable scanout to engine/CRTC of HDMI
0x040 4 Interrupts (read = triggered interrupts, write = clear interrupt)
0x050 4 Interrupt enable. bit 0 = first plane, bit 1 = second plane
0x08C 4 Alpha value (transparency) from 0x00 to 0xFF
0x0A0 4 Alpha control: (bit 0 = disable alpha blending)
0x100 4 CSC Control. bit 0 = enable CSC
0x104 4 CSC unknown
0x108 4 CSC unknown
0x10C 4 CSC rr
0x110 4 CSC rg
0x114 4 CSC rb
0x118 4 CSC gr
0x11C 4 CSC gg
0x120 4 CSC gb
0x124 4 CSC br
0x128 4 CSC bg
0x12C 4 CSC bb
0x130 4 CSC unknown
0x134 4 CSC unknown
0x138 4 CSC rr
0x13C 4 CSC rg
0x140 4 CSC rb
0x144 4 CSC gr
0x148 4 CSC gg
0x14C 4 CSC gb
0x150 4 CSC br
0x154 4 CSC bg
0x158 4 CSC bb
0x15C 4 CSC related
0x160 4 CSC related
0x164 4 CSC related
0x168 4 CSC related
0x180 4 Some flags
0x200 + n * 0x100 + 0x00 4 Physical address
0x200 + n * 0x100 + 0x04 4 Unknown
0x200 + n * 0x100 + 0x24 4 Scanout source X (in (0x100000 / 960) multiples)
0x200 + n * 0x100 + 0x28 4 Scanout source Y (in (0x100000 / 544) multiples)
0x200 + n * 0x100 + 0x40 4 Pixelformat (0x10 = A8B8G8R8)
0x200 + n * 0x100 + 0x44 4 Buffer width (aligned to 16)
0x200 + n * 0x100 + 0x48 4 Buffer height (aligned to 8)
0x200 + n * 0x100 + 0x4C 4 Control register. bit 0 = disable plane?
0x200 + n * 0x100 + 0x54 4 Leftover stride
0x200 + n * 0x100 + 0x58 4 ??
0x200 + n * 0x100 + 0x60 4 Vertical front porch
0x200 + n * 0x100 + 0x64 4 Vertical back porch
0x200 + n * 0x100 + 0x68 4 Horizontal front porch
0x200 + n * 0x100 + 0x6C 4 Horizontal back porch
0x200 + n * 0x100 + 0xA0 4 Destination pixelformat
0x200 + n * 0x100 + 0xA4 4 Destination width
0x200 + n * 0x100 + 0xA8 4 Destination height
0x200 + n * 0x100 + 0xC0 4 Scanout source width (in (0x100000 / 960) multiples)
0x200 + n * 0x100 + 0xC4 4 Scanout source height (in (0x100000 / 544) multiples)
0x200 + n * 0x100 + 0xC8 4 Scanout destination X
0x200 + n * 0x100 + 0xCC 4 Scanout destination Y
0x200 + n * 0x100 + 0xD0 4 Scanout destination width
0x200 + n * 0x100 + 0xD4 4 Scanout destination height

IftucRegs (control registers?)

Offset Size Description
0x00 4 Control register. bit 0 = enable engine.
0x04 4 Plane control register. bit 0 = enable alpha blending, bit 2 = enable first plane, bit 4 = enable second plane.
0x10 + i * 0x8 + 0x00 4 bit 0 = Use the first (offset 0x2XX) or second (offset 0x3XX) configuration
0x10 + i * 0x8 + 0x04 4 ??
0x20 4 Alpha control register. bit 2 = enable alpha blending.

Where i can be 0 or 1 for RegA or RegB.