SPI Registers

From Vita Development Wiki
Revision as of 20:20, 28 May 2021 by Xerpi (talk | contribs)
Jump to navigation Jump to search

MMIO Interfaces

Name Physical address
SceSpi0Reg (SceSyscon) 0xE0A00000
SceSpi1Reg (SceMotionDev) 0xE0A10000
SceSpi2Reg (SceOled, SceLcd) 0xE0A20000

Registers

Offset Size Name Description
0x00 4 SPI_RXDATA Read FIFO
0x04 4 SPI_TXDATA Write FIFO
0x08 4 SPI_CTL Configuration
0x0C 4 SPI_INTCTL Interrupt control?
0x10 4 SPI_ST Start transfer (write 0b1), cancel transfer(write 0b0), transfer busy (reads bit0 = 0)?
0x14 4 SPI_DMACTL ??
0x18 4 ?? Start transfer (bit 0 or 1), transfer direction (bit 0 or 1)?
0x24 4 SPI_TC Flags?
0x28 4 SPI_RXFIFO_STATUS Number of available bytes to read from the RX FIFO
0x2C 4 SPI_TXFIFO_STATUS Number of pending bytes in the write the TX FIFO (maximum = 0x7F)

Notes

Registers seem to be very similar to https://github.com/torvalds/linux/blob/master/drivers/spi/spi-sun4i.c