System controller
Module
| Version |
World |
Privilege
|
| 1.69-3.60 |
Non-secure |
Kernel
|
Libraries
Known NIDs
| Version |
Name |
World |
Visibility |
NID
|
| 1.69-3.60 |
SceSysconForDriver |
Non-secure |
Kernel |
0x60A35F64
|
Types
#define SCE_KERNEL_ERROR_SYSCON_ERROR 0x80250000
#define SCE_SYSCON_ERROR_INVALID_SIZE 0x80250001
#define SCE_SYSCON_ERROR_INVALID_ARGUMENT 0x80250002
#define SCE_SYSCON_ERROR_INVALID_POINTER 0x80250003
#define SCE_SYSCON_ERROR_INVALID_STATUS 0x80250004
#define SCE_SYSCON_ERROR_NOT_INTR_ALLOWED 0x80250005
#define SCE_SYSCON_ERROR_TX_SIZE_TOO_LONG 0x80250006
#define SCE_SYSCON_ERROR_ILLEGAL_SIZE 0x80250100
#define SCE_SYSCON_ERROR_ILLEGAL_STATUS 0x80250101
#define SCE_SYSCON_ERROR_NOEXEC 0x80250102
#define SCE_SYSCON_ERROR_INVALID_FLAGS 0x80250105
// for Ernie error code
// 0x802502XX. Returned with 0x80250200 | rx[3], where rx is the returned data by Syscon
typedef struct SceSysconPacket {
struct SceSysconPacket *next; // 0x00
u32 status; // Lower 16 bits contain flags
SceUID semaId; // 0x08
u32 index; // Out: returns to which packet list the packet was inserted into
u8 tx[32]; // tx[0..1] = cmd, tx[2] = size
u8 rx[32]; // rx[0..1] = cmd?, rx[2] = size?
void *tx_extra;
u8 *rx_extra;
u32 rx_extra_size;
u32 rx_offset;
int (*callback)(SceSysconPacket *packet, void *argp);
void *argp;
u32 time;
u32 unk2[5];
} SceSysconPacket; /* size 0x80 */
typedef enum SceSysconControl {
SCE_SYSCON_CTRL_UP = 0x1,
SCE_SYSCON_CTRL_RIGHT = 0x2,
SCE_SYSCON_CTRL_DOWN = 0x4,
SCE_SYSCON_CTRL_LEFT = 0x8,
SCE_SYSCON_CTRL_TRIANGLE = 0x10,
SCE_SYSCON_CTRL_CIRCLE = 0x20,
SCE_SYSCON_CTRL_CROSS = 0x40,
SCE_SYSCON_CTRL_SQUARE = 0x80,
SCE_SYSCON_CTRL_SELECT = 0x100,
SCE_SYSCON_CTRL_LTRIGGER = 0x200,
SCE_SYSCON_CTRL_RTRIGGER = 0x400,
SCE_SYSCON_CTRL_START = 0x800,
SCE_SYSCON_CTRL_PSBUTTON = 0x1000,
SCE_SYSCON_CTRL_POWER = 0x4000,
SCE_SYSCON_CTRL_VOLUP = 0x10000,
SCE_SYSCON_CTRL_VOLDOWN = 0x20000,
SCE_SYSCON_CTRL_HEADPHONE = 0x8000000
} SceSysconControl;
Flags (passed to sceSysconCmdExecForDriver, etc), also lower bits of status:
| Flags |
Meaning
|
| 0x1 |
Some kind of priority that helps to select to which packet list the packet is inserted into.
|
| 0x100 |
Do not insert packet checksum (at tx_buf[2 + len]), where len = tx_buf[2]. And don't memset the rest of the buffer to -1 (memset(tx_buf + len + 3, -1, 29 - len)) if len < 29.
|
| 0x400 |
When set, use rx_extra to receive the data. rx_extra_size must be greater than 32.
|
| 0x800 |
When set: use tx_extra instead of tx for sending data. The size is contained in tx_extra[2] and must be smaller or equal to 253. When cleared: use tx and the size is contained in tx[2], which has to be smaller or equal 29.
|
SceSysconForDriver
sceSysconErnieShutdownForDriver
| Version |
NID
|
| 0.931-3.60 |
0x94AB13CC
|
#define ERNIE_SHUTDOWN_SHUTDOWN 0
#define ERNIE_SHUTDOWN_REBOOT 1
int sceSysconErnieShutdownForDriver(int mode);
sceSysconPowerCtrlKermitResetForDriver
| Version |
NID
|
| 0.931-3.60 |
0x14B99945
|
Executes SMC 0x11A: return sceSysconSetPowerMode(2, 0);
int sceSysconPowerCtrlKermitResetForDriver(void);
sceSysconBatteryExecBLCommandForDriver
| Version |
NID
|
| 0.990-3.60 |
0x74B2AB55
|
int sceSysconBatteryExecBLCommandForDriver(int ctx);
sceSysconBatteryReadBLCommandForDriver
| Version |
NID
|
| 0.990-3.60 |
0x448DAFF1
|
int sceSysconBatteryReadBLCommandForDriver(int ctx, int unk1, int unk2, void *buf, SceSize size);
sceSysconBatterySetBLCommandForDriver
| Version |
NID
|
| 0.990-3.60 |
0xE4F29744
|
int sceSysconBatterySetBLCommandForDriver(int ctx, int unk, void *src, SceSize size);
sceSysconBatteryStartBLModeForDriver
| Version |
NID
|
| 0.990-3.60 |
0x2CEF078E
|
int sceSysconBatteryStartBLModeForDriver(void);
sceSysconBatteryStopBLModeForDriver
| Version |
NID
|
| 0.990-3.60 |
0xE4AE7852
|
int sceSysconBatteryStopBLModeForDriver(void);
sceSysconBatterySWResetForDriver
| Version |
NID
|
| 0.990-3.60 |
0x87DA378D
|
int sceSysconBatterySWResetForDriver(void);
SceSysconForDriver_ACEE1C70
| Version |
NID
|
| 3.60 |
0xACEE1C70
|
related to battery, called by ScePowerForDriver_0D56C601.
SceSysconForDriver_4A184B7C
| Version |
NID
|
| 3.60 |
0x4A184B7C
|
related to battery, called by ScePowerForDriver_627A89C6.
sceSysconIsLowBatteryInhibitUpdateRebootForDriver
| Version |
NID
|
| 3.60 |
0x1A0C140F
|
used by scePowerIsLowBatteryInhibitUpdateReboot
int sceSysconIsLowBatteryInhibitUpdateRebootForDriver(unk);
sceSysconIsLowBatteryInhibitUpdateDownloadForDriver
| Version |
NID
|
| 3.60 |
0x1E3130EE
|
used by scePowerIsLowBatteryInhibitUpdateDownload
int sceSysconIsLowBatteryInhibitUpdateDownloadForDriver(unk);
sceSysconGetManualChargeModeForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x4FEC564C
|
int sceSysconGetManualChargeModeForDriver(int *piMode);
sceSysconCtrlManualChargeModeForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0xC6A2C9EF
|
int sceSysconCtrlManualChargeModeForDriver(int mode);
sceSysconGetLogInfoForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x701535FC
|
typedef struct SceSysconLogInfo { // size is 8 on FW 3.60
uint8_t unk_0[8];
} SceSysconLogInfo;
int sceSysconGetLogInfoForDriver(SceSysconLogInfo *pInfo);
sceSysconLogStartForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x4E55CF5E
|
int sceSysconLogStartForDriver(void);
sceSysconLogStartWaitingForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x9C0B1E61
|
int sceSysconLogStartWaitingForDriver(void);
sceSysconLogReadDataForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x487D97F3
|
int sceSysconLogReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconGetTemperatureLogForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x3B354824
|
sceSysconClearTemperatureLogForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x3843D657
|
sceSysconGetUsbDetStatusForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0xEF810687
|
sceSysconGetBaryonTimestampForDriver
| Version |
NID
|
| 3.60 |
0x4D588A0A
|
A temp name was sceSysconGetTimeStampForDriver, derived from PSP.
Returns the timestamp of latest installed Syscon FW patch, formatted as YYYYMMDDhhmm. This comes from a string stored in Syscon FW under another format: $Date:: YYYY-MM-DD hh:mm:ss +0900#$
Example: $Date:: 2013-12-13 15:52:05 +0900#$ in Syscon FW becomes 201312131552 in Syscon command 2.
// pTimestamp will point to a buffer of size 0x10 bytes, containing a string of size 13 (12: length + 1: terminal character)
int sceSysconGetBaryonTimestampForDriver(char *pTimestamp);
sceSysconCtrlHdmiCecPowerForDriver
| Version |
NID
|
| 0.931-3.60 |
0x62155962
|
Sets the pin CDC Hot Plug Detect (HPD) state of the HDMI bridge (AD80244 / ADV7533).
int sceSysconCtrlHdmiCecPowerForDriver(SceBool enable_HDMI_CDC_HPD_pin);
SceSysconForDriver_3FDD29D6
| Version |
NID
|
| 0.931-3.60 |
0x3FDD29D6
|
int SceSysconForDriver_3FDD29D6(int a1, SceBool use_flag);
sceSysconCtrlRMRPowerForDriver
| Version |
NID
|
| 3.60 |
0x710A7CF0
|
Temp name was sceSysconCtrlMsPowerForDriver.
int sceSysconCtrlRMRPowerForDriver(int enable_power);
SceSysconForDriver_7F198FA2
| Version |
NID
|
| 0.931-3.60 |
0x7F198FA2
|
Used by ScePower when setting a device clock frequency.
/* device:
0:
1: SetSysClockFrequency, SetDmac5ClockFrequency, SetBusClockFrequency, SetCameraBusClockFrequency
2: SetArmClockFrequency
3: SetGpuClockFrequency, SetVipClockFrequency
4: SetGpuClockFrequencyInternal, SetGpuXbarClockFrequency, SetCompatClockFrequency
unk: 0x8A - (something got from ScePervasiveForDriver)
*/
int SceSysconForDriver_7F198FA2(SceUInt32 device, SceUInt32 unk);
sceSysconSetPowerModeForDriver
| Version |
NID
|
| 0.940-3.60 |
0x8A95D35C
|
Temp name was sceSysconResetDeviceForDriver.
int sceSysconSetPowerModeForDriver(int type, int mode);
It issues SMC #0 with r12 = 0x11A.
The mode argument is usually set to 0x2 or sometimes 0x8002 (which seems to correspond to some request by the UDC and BT drivers).
The type argument determines what to do.
Real define names are like: "SCE_SYSCON_POWERMODE_MODE_STANDBY".
| Type |
Description |
Syscon command
|
| 0 |
Power off |
{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
| 1 |
Suspend (low-power state) |
{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
| 2 |
Cold reset |
{0x01, 8, 1, 0}
|
| 3 |
?Reset to update mode? |
{0xC1, 0, 2, 0}
|
| 4 |
?Reset to update mode? |
{0xC1, 0, 2, 1}
|
| 5 |
Hibernate |
{0xC2, 0, 2, 0x5A}
|
| 16 |
?? |
{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
| 17 |
Soft reset (suspend and immediately resume) |
{0xC0, 0, 5, type, (~mode) & 0xFF, (~mode >> 8) & 0xFF, (mode >> 16) & 0xFF}
|
sceSysconEnableHibernateIOForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 0.990-3.60 |
0x4946538A
|
int sceSysconEnableHibernateIOForDriver(int a1);
sceSysconWaitReadyForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x55DF1C9B
|
Temp name was sceSysconWaitInitializedForDriver.
int sceSysconWaitReadyForDriver(void);
sceSysconCmdSyncForDriver
| Version |
NID
|
| 0.931-3.60 |
0x6E517D22
|
int sceSysconCmdSyncForDriver(SceSysconPacket *packet, int noWait);
sceSysconCmdExecForDriver
| Version |
NID
|
| 0.931-3.60 |
0x9ADDCA4A
|
int sceSysconCmdExecForDriver(SceSysconPacket *packet, unsigned int flags);
sceSysconCmdExecAsyncForDriver
| Version |
NID
|
| 0.931-3.60 |
0xC2224E82
|
int sceSysconCmdExecAsyncForDriver(SceSysconPacket *packet, u32 flags, int (*callback)(SceSysconPacket *, void *), void *argp);
sceSysconCtrlSdPowerForDriver
| Version |
NID
|
| 3.60 |
0xBE1ADE4F
|
Enables/disables GameCard reader.
Used by SceSdstor.
int sceSysconCtrlSdPowerForDriver(int enable_power);
sceSysconCtrlWirelessPowerForDriver
| Version |
NID
|
| 0.990 |
0x4FBDA504
|
| 3.60 |
not present
|
sceSysconCtrlWirelessPower2ForDriver
| Version |
NID
|
| 0.940 |
not present
|
| 3.60 |
0xA2E85DB9
|
sceSysconCtrlWirelessPowerDownForDriver
| Version |
NID
|
| 0.990 |
0xDF8C6D2D
|
| 3.60 |
not present
|
SceSysconForDriver_C0F215B7
| Version |
NID
|
| 0.940 |
not present
|
| 3.60 |
0xC0F215B7
|
Gets something (a byte).
int SceSysconForDriver_C0F215B7(void);
sceSysconVerifyConfigstorageScriptForDriver
| Version |
NID
|
| 3.60 |
0xCC6F90A8
|
This function is not used by the OS and anyway it would always return error because it calls a command that is not implemented in Syscon FW.
int sceSysconVerifyConfigstorageScriptForDriver(int a1, void *pScript, SceSize size);
sceSysconLoadConfigstorageScriptForDriver
| Version |
NID
|
| 3.60 |
0x89C5CFD6
|
The OS uses this function to change between modes: IDU mode, Show Mode, no mode. This works by spoofing or rewriting KBL Param#Hardware Info. This is reboot persistent.
int sceSysconLoadConfigstorageScriptForDriver(int a1, void *pScript, SceSize size);
sceSysconBeginConfigstorageTransactionForDriver
| Version |
NID
|
| 0.990-3.60 |
0xA4968B8C
|
int sceSysconBeginConfigstorageTransactionForDriver(void);
sceSysconCommitConfigstorageTransactionForDriver
| Version |
NID
|
| 0.990-3.60 |
0x7B9B3617
|
int sceSysconCommitConfigstorageTransactionForDriver(void);
sceSysconEndConfigstorageTransactionForDriver
| Version |
NID
|
| 0.990-3.60 |
0xFCC3E8EE
|
int sceSysconEndConfigstorageTransactionForDriver(void);
sceSysconSetDebugHandlersForDriver
| Version |
NID
|
| 0.990-3.60 |
0xF245CD6F
|
/** A set of debug handlers for syscon, that you can set in sceSysconSetDebugHandlersForDriver(). */
typedef struct SceSysconDebugHandlers {
/** Structure size (probably, unused). */
s32 size;
/** Callback ran right before running a packet, with a pointer to it passed as the first argument. */
void (*start)(SceSysconPacket *packet);
/** Callback ran right after finishing running a packet, with a pointer to it passed as the first argument. */
void (*end)(SceSysconPacket *packet);
} SceSysconDebugHandlers;
int sceSysconSetDebugHandlersForDriver(SceSysconDebugHandlers *debug_handlers);
sceSysconGetBatteryCalibDataForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x9ADC9936
|
int sceSysconGetBatteryCalibDataForDriver(int *piData1, int *piData2, int *piData3, int *piData4);
sceSysconGetTouchpanelDeviceInfoForDriver
| Version |
NID
|
| 0.990-3.60 |
0xF492E69E
|
typedef struct SceKernelTouchpanelDeviceInfo {
uint16_t FrontVendorID;
uint16_t FrontFwVersion;
uint16_t BackVendorID;
uint16_t BackFwVersion;
} SceKernelTouchpanelDeviceInfo;
int sceSysconGetTouchpanelDeviceInfoForDriver(SceKernelTouchpanelDeviceInfo *pInfo);
sceSysconGetTouchpanelDeviceInfo2ForDriver
| Version |
NID
|
| 0.940 |
not present
|
| 0.990-3.60 |
0x030D447F
|
This is a guessed name.
Returns extended panel info.
typedef struct SceKernelTouchpanelDeviceInfo2 {
uint16_t FrontVendorID;
uint16_t FrontFwVersion;
uint16_t FrontUnk1;
uint8_t FrontUnk2;
uint8_t FrontUnk3;
uint16_t unused1;
uint16_t BackVendorID;
uint16_t BackFwVersion;
uint16_t BackUnk1;
uint8_t BackUnk2;
uint8_t BackUnk3;
uint16_t unused2;
} SceKernelTouchpanelDeviceInfo2;
int sceSysconGetTouchpanelDeviceInfo2ForDriver(SceKernelTouchpanelDeviceInfo2 *pInfo);
sceSysconGetHardwareInfoForDriver
| Version |
NID
|
| 0.931-3.60 |
0xCBD6D8BC
|
Returns Ernie HW info. See KBL Param#Hardware Info.
int sceSysconGetHardwareInfoForDriver(void);
sceSysconGetHardwareInfo2ForDriver
| Version |
NID
|
| 3.60 |
0x965C68C3
|
//"hwinfo = 0x%08x, id = 0x%llx, hwtype = 0x%08x"
typedef struct SceKernelHardwareInfo2 {
int hwinfo;
uint64_t id; // unsure
int hwtype; // unsure
} SceKernelHardwareInfo2;
int sceSysconGetHardwareInfo2ForDriver(SceKernelHardwareInfo2 *pInfo);
sceSysconGetBaryonVersionForDriver
| Version |
NID
|
| 0.931-3.60 |
0xFF86F4C5
|
On PSVita it is Ernie Version not Baryon Version.
int sceSysconGetBaryonVersionForDriver(void);
SceSysconForDriver_0D0B6D25
| Version |
NID
|
| 3.60 |
0x0D0B6D25
|
Maybe exits Syscon DownLoader mode.
int SceSysconForDriver_0D0B6D25(void);
SceSysconForDriver_4BC63A40
| Version |
NID
|
| 3.60 |
0x4BC63A40
|
SceSysconForDriver_EBE3262C
| Version |
NID
|
| 1.03-3.60 |
0xEBE3262C
|
In SceSblPostSsMgr, used just after sceSysconGetBaryonVersionForDriver.
Return some Syscon Mode information. Bit 6 (from right) is Syscon DownLoader Mode flag. Bit 3 (from right) is some flag.
int SceSysconForDriver_EBE3262C(void);
sceSysconGetErnieDLVersionForDriver
| Version |
NID
|
| 0.931-3.60 |
0xD2F456DC
|
Runs syscon command 0x1100.
void sceSysconGetErnieDLVersionForDriver(int *pVersion);
sceSysconGetBatteryVersionForDriver
| Version |
NID
|
| 0.931-3.60 |
0x68E0031E
|
Battery IC name: if HWinfo > 7 "Abby" else "Bert".
int sceSysconGetBatteryVersionForDriver(int *HWinfo, int *FWinfo, int *DFinfo);
sceSysconGetManufacturesStatusForDriver
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x3E09A1F4
|
In theory, this function should only be called when Product Mode is already set.
int sceSysconGetManufacturesStatusForDriver(int *piStatus);
SceSysconForDriver_9DA2A5AB
| Version |
NID
|
| 3.60 |
0x9DA2A5AB
|
Used by scePowerGetBatteryLifeTime and other ScePower functions.
int SceSysconForDriver_9DA2A5AB(void);
sceSysconVsReadDataForDriver
| Version |
NID
|
| 0.931-3.60 |
0x299B1CE7
|
Temp name was sceSysconReadCommandForDriver.
Calls syscon command 0x90.
Used by SceRtc.
// size: On FW 3.60, must be between 0 and 0x18. On FW 0.931, must be 2, 4 or 8.
// offset: Must be between 0 and 0xFF.
// offset + size must not exceed 0x100
int sceSysconVsReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconVsWriteDataForDriver
| Version |
NID
|
| 0.931-3.60 |
0xE26488B9
|
Temp name was sceSysconSendCommandForDriver.
Calls syscon command 0x91.
Used by SceRtc and ScePower.
// size: On FW 3.60, must be between 0 and 0x18. On FW 0.931, must be 2, 4 or 8.
// offset: Must be between 0 and 0xFF.
// offset + size must not exceed 0x100
int sceSysconVsWriteDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconNvsSetRunModeForDriver
| Version |
NID
|
| 0.931-3.60 |
0x81A6060D
|
Used by sceSblNvsReadDataForKernel and sceSblNvsWriteDataForKernel.
// mode: 0 before read/write
int sceSysconNvsSetRunModeForDriver(int mode);
sceSysconNvsSetUnkModeForDriver
| Version |
NID
|
| 0.931-3.60 |
0x2EC6D55D
|
// mode: unk
int sceSysconNvsSetUnkModeForDriver(int mode);
sceSysconNvsReadDataForDriver
| Version |
NID
|
| 0.931-3.60 |
0xACAFA2B8
|
Used by sceSblSsNvsReadDataForKernel and sceSblSsGetNvsDataForDriver.
int sceSysconNvsReadDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconNvsWriteDataForDriver
| Version |
NID
|
| 0.931-3.60 |
0x10C9657A
|
Used by sceSblSsNvsWriteDataForKernel and sceSblSsSetNvsDataForDriver.
int sceSysconNvsWriteDataForDriver(SceUInt32 offset, void *buffer, SceSize size);
sceSysconGetMultiCnInfoForDriver
| Version |
NID
|
| 3.60 |
0x1503D6A0
|
sceSysconSetMultiCnPortForDriver
| Version |
NID
|
| 0.940-3.60 |
0x8AAB6308
|
// port: 0: for JIG mode, 0x10000: for normal mode
int sceSysconSetMultiCnPortForDriver(int port);
SceSysconForDriver_9CA6EB70
| Version |
NID
|
| 1.03-3.60 |
0x9CA6EB70
|
Sends value using Syscon command 0x89E. Does nothing on prototype models with motherboards IRT-001 and older.
Related to LED.
int SceSysconForDriver_9CA6EB70(SceBool state);
sceSysconCtrlLEDForDriver
| Version |
NID
|
| 0.931-3.60 |
0x04EC7579
|
#define STATE_ON 1
#define STATE_OFF 0
#define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue)
int sceSysconCtrlLEDForDriver(int device, SceBool state);
sceSysconCtrlDolceLEDForDriver
| Version |
NID
|
| 0.931 |
not present
|
| 3.60 |
0x727F985A
|
This is a guessed name.
#define STATE_ON 0
#define STATE_BLINK_SLOW 1
#define STATE_BLINK_FAST 2
int sceSysconCtrlDolceLEDForDriver(SceUInt32 state);
sceSysconConfigLEDForDriver
| Version |
NID
|
| 3.60 |
0x6F586D1A
|
This is a guessed name.
#define DEVICE_UNK 0x40 // maybe PS button or CP power LED or maybe color (blue)
// unk: SceLedConfig.unk_4
int sceSysconConfigLEDForDriver(int device, SceUInt32 unk);
sceSysconCtrlAccPowerForDriver
| Version |
NID
|
| 0.940-3.60 |
0x8D1D97E8
|
int sceSysconCtrlAccPowerForDriver(SceBool enable);
sceSysconCtrlDeviceResetForDriver
| Version |
NID
|
| 0.990-3.60 |
0x40FF3898
|
sceSysconJigOpenPortForDriver
| Version |
NID
|
| 0.940-3.60 |
0x44A173F5
|
int sceSysconJigOpenPortForDriver(void);
sceSysconJigClosePortForDriver
| Version |
NID
|
| 0.940-3.60 |
0x483FAE05
|
int sceSysconJigClosePortForDriver(void);
sceSysconJigSetConfigForDriver
| Version |
NID
|
| 0.940-3.60 |
0xD24BF916
|
int sceSysconJigSetConfigForDriver(char a1, char a2);
sceSysconCtrlHostOutputViaDongleForDriver
| Version |
NID
|
| 0.990-3.60 |
0xDECCB2B4
|
Connect / disconnect PSVita SLIM Jig Host.
int sceSysconCtrlHostOutputViaDongleForDriver(SceBool enable);
receive_pm_sm_jig_msg_from_syscon
| Version |
NID
|
| 0.940-3.60 |
0x3C80B529
|
int receive_pm_sm_jig_msg_from_syscon(SceUInt32 offset, SceSize size, void *buf);
send_pm_sm_jig_msg_to_syscon
| Version |
NID
|
| 0.940-3.60 |
0x7BFBA09E
|
send_pm_sm_stop_to_syscon
| Version |
NID
|
| 0.990-3.60 |
0x933D813F
|
Used just after send_pm_sm_jig_msg_to_syscon or when it fails before.
int send_pm_sm_stop_to_syscon(int a1, int a2, int a3);
sceSysconIduModeSetForDriver
| Version |
NID
|
| 3.60 |
0x956D07CB
|
sceSysconIduModeClearForDriver
| Version |
NID
|
| 3.60 |
0x34574496
|
sceSysconShowModeSetForDriver
| Version |
NID
|
| 3.60 |
0x6D65B70F
|
sceSysconShowModeClearForDriver
| Version |
NID
|
| 3.60 |
0x8D7724C0
|
sceSysconIsDownLoaderModeForDriver
| Version |
NID
|
| 3.60 |
0x9ADD60D2
|
sceSysconIsDealDownLoaderModeForDriver
| Version |
NID
|
| 0.990-3.60 |
0xB7BCC638
|
sceSysconSetAlarmCallbackForDriver
| Version |
NID
|
| 3.60 |
0x32418370
|
sceSysconSetWlanCallbackForDriver
| Version |
NID
|
| 0.990 |
0x4DEB8712
|
| 3.60 |
not present
|
This is a guessed name.
Looks like sceSysconSetAlarmCallbackForDriver.
sceSysconSetLowBatteryCallbackForDriver
| Version |
NID
|
| 3.60 |
0x3F0DB7C0
|
sceSysconSetThermalAlertCallbackForDriver
| Version |
NID
|
| 3.60 |
0x773B8126
|
sceSysconUpdaterSetSegmentForDriver
| Version |
NID
|
| 0.931-3.60 |
0x9B00BC7F
|
// segment_no: a 8bit value
int sceSysconUpdaterSetSegmentForDriver(SceUInt32 segment_no);
sceSysconUpdaterLoadSegmentForDriver
| Version |
NID
|
| 0.931-3.60 |
0x356B9696
|
// pSegment: the encrypted segment to load
// unk: maybe segment_no
// size: usually 0x400
int sceSysconUpdaterLoadSegmentForDriver(void *segment, int unk, SceSize size);
sceSysconUpdaterLoadSegment2ForDriver
| Version |
NID
|
| 0.931-3.60 |
0x734544E4
|
// pSegment: the encrypted segment to load
// unk: maybe segment_no
// size: usually 0x400
int sceSysconUpdaterLoadSegment2ForDriver(void *segment, int unk, SceSize size);
sceSysconUpdaterCalcChecksumForDriver
| Version |
NID
|
| 0.931-3.60 |
0xD27C3D80
|
Computes checksum to use with sceSysconUpdaterExecProgrammingForDriver. It does not call any Syscon command.
int sceSysconUpdaterCalcChecksumForDriver(void *data, SceSize size, int *checksum);
sceSysconUpdaterExecProgrammingForDriver
| Version |
NID
|
| 0.931-3.60 |
0x69AD76E4
|
Executes programming, i.e writes segments on Syscon EEPROM.
// checksum: value got from sceSysconUpdaterCalcChecksumForDriver
int sceSysconUpdaterExecProgrammingForDriver(int checksum);
sceSysconUpdaterSetRunModeForDriver
| Version |
NID
|
| 0.931-3.60 |
0xB487C2FB
|
// mode: 0x72BA (0.931-3.60), 0x9A54 (0.931-0.3.60), 0x152E (3.60), 0x3665 (3.60), 0xC5E7 (3.60),
int sceSysconUpdaterSetRunModeForDriver(int mode);
sceSysconUpdaterExecFinalizeForDriver
| Version |
NID
|
| 0.931-3.60 |
0xC7747A63
|
// digest: sha1 of decrypted concatenated segments, comes from Syscon Update package packet type 0x20
// size: usually 0x14 (sha1 size)
int sceSysconUpdaterExecFinalizeForDriver(void *digest, SceSize size);
SceSysconForDriver_CBA836FF
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0xCBA836FF
|
Sends a 0x18-byte buffer to Syscon command 0x1185. This Syscon command 0x1185 seems to be unimplemented in recent Syscon FWs: it does not do anything.
// size: must be 0x18
int SceSysconForDriver_CBA836FF(void *pBuf, SceSize size);
snvs_read
| Version |
NID
|
| 1.03-3.60 |
0xEBDF88B9
|
Used in SceSblPostSsMgr to read data from SNVS with pm_sm command 8. Also used in SceSblUpdateMgr with update_service_sm commands 0xB0002 and 0xC0002.
// in_size: 0x10
// out_size: 0x30
int snvs_read(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);
snvs_write
| Version |
NID
|
| 1.03-3.60 |
0x63683B9B
|
Used in SceSblPostSsMgr to write data to SNVS with pm_sm command 8. Also used in SceSblUpdateMgr with update_service_sm commands 0xB0002 and 0xC0002.
// in_size: 0x30
// out_size: 0x10
int snvs_write(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);
syscon_update_command_0xD00002
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x4D03754A
|
Calls Syscon command 0xD0.
Used in SceSblUpdateMgr with update_service_sm command 0xD0002.
// in_buf: buffer that embeds input data, usually 0xD0002 command request + 8
// in_size: usually 0x28
// out_buf: buffer to receive result, usually 0xD0002 command request + 0x30
// out_size: usually 0x28
int syscon_update_command_0xD00002(void *in_buf, SceSize in_size, void *out_buf, SceSize out_size);
SceSysconForDriver_D7F5A797
| Version |
NID
|
| 0.931-3.60 |
0xD7F5A797
|
Used only by ScePower.
int SceSysconForDriver_D7F5A797(void);
SceSysconForDriver_B9EA2FA8
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0xB9EA2FA8
|
Used only by SceUsbServ.
int SceSysconForDriver_B9EA2FA8(void);
SceSysconForDriver_C562AF3A
| Version |
NID
|
| 0.931-3.60 |
0xC562AF3A
|
Only used by ScePower.
If Ernie version is greater than 0x70503 it calls syscon command 0x900 else syscon command 0x802.
pOut value comes from Syscon. Only 4 bytes are copied to pOut.
int SceSysconForDriver_C562AF3A(SceUInt32 *pOut);
SceSysconForDriver_901D6CD4
| Version |
NID
|
| 0.931-3.60 |
0x901D6CD4
|
Sets a flag used internally by SceSyscon.
Used by SceCtrl, ScePower.
int SceSysconForDriver_901D6CD4(int enable);
sceSysconGetControlsInfoForDriver
| Version |
NID
|
| 0.931-3.60 |
0x145F59A4
|
This is a guessed name.
See Boot Controls Info.
Runs syscon command 0x100.
int sceSysconGetControlsInfoForDriver(SceUInt32 *pCtrl);
SceSysconForDriver_76272CB9
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0x76272CB9
|
Gets a 4 byte value.
Runs syscon command 0x120.
int SceSysconForDriver_76272CB9(SceUInt32 *unk);
SceSysconForDriver_86BAAF7D
| Version |
NID
|
| 0.940-3.60 |
0x86BAAF7D
|
Returns a 8-bit value casted to 32-bit for convenience.
Used by SceRtc.
int SceSysconForDriver_86BAAF7D(void);
SceSysconForDriver_D7BEFF8B
| Version |
NID
|
| 0.931-3.60 |
0xD7BEFF8B
|
Gets Syscon power on time in seconds.
Calls Syscon command 0x11.
int SceSysconForDriver_D7BEFF8B(SceUInt32 *puiTime);
SceSysconForDriver_3168F3AF
| Version |
NID
|
| 0.931-3.60 |
0x3168F3AF
|
Calls Syscon command 0x12.
// FW 0.931
int SceSysconForDriver_3168F3AF(SceUInt32 *pResult);
// FW 3.60
int SceSysconForDriver_3168F3AF(SceUInt32 *pResult, SceUInt32 *pResult2);
SceSysconForDriver_BA09F171
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 3.60 |
0xBA09F171
|
Calls Syscon command 0x13.
int SceSysconForDriver_BA09F171(SceUInt32 *pResult, SceUInt32 *pResult2);
SceSysconForDriver_9B6A6F64
| Version |
NID
|
| 0.931-3.60 |
0x9B6A6F64
|
Calls Syscon command 0x81.
Sets current Syscon power on time in seconds. The set value can be get with #SceSysconForDriver_D7BEFF8B.
Used by SceRtc. Set to 0 just before setting Current Tick, to reset syscon power on time.
int SceSysconForDriver_9B6A6F64(SceUInt32 time);
SceSysconForDriver_51164951
| Version |
NID
|
| 0.931-3.60 |
0x51164951
|
Calls Syscon command 0x82. On Syscon version < 0x90907, 4 bytes are sent to Syscon, whilst on Syscon version >= 0x90907, 5 bytes are sent to Syscon.
Used by SceRtc.
The set value can be get with SceSyscon#SceSysconForDriver_3168F3AF.
// a1: seen value: 0xffffffff during Syscon Init
// a2: some 8-bit flag, seen value: 0 during Syscon Init
// FW 0.931
int SceSysconForDriver_51164951(int a1);
// FW 3.60
int SceSysconForDriver_51164951(int a1, int a2);
SceSysconForDriver_373ECF8A
| Version |
NID
|
| 0.931-0.940 |
not present
|
| 0.931-3.60 |
0x373ECF8A
|
Calls Syscon command 0x83.
Sends 2 bytes of data to Syscon.
int SceSysconForDriver_373ECF8A(SceUInt32 unk);
Commands used by function
It seems like the command format is as follows: (direction << 8) | cmd_id, where direction = 1 means write to syscon, and direction = 0 means read from syscon.
| Commands used
|
NID
|
Description
|
| 0x0
|
0x0D0B6D25
|
|
| 0x1
|
module_start
|
sceSysconGetBaryonVersionForDriver. Used during SysconInit.
|
| 0x2
|
module_start
|
sceSysconGetBaryonTimestampForDriver. Returns 12-byte string followed by at least 2-byte memory leak. Used during SysconInit.
|
| 0x3
|
module_start
|
sceSysconGetSleepFactor. Used during SysconInit.
|
| 0x4
|
|
|
| 0x5
|
0xCBD6D8BC
|
sceSysconGetHardwareInfoForDriver
|
| 0x6
|
|
|
| 0x10
|
0xCF5B2F2F
|
sceSysconGetWakeupFactorForDriver
|
| 0x11
|
0xD7BEFF8B
|
??
|
| 0x12
|
0x3168F3AF
|
??
|
| 0x13
|
0xBA09F171
|
??
|
| 0x14
|
0x93075DD1
|
??
|
| 0x15
|
0x3E09A1F4
|
sceSysconGetManufacturesStatusForDriver
|
| 0x80
|
module_start
|
?? used at SysconInit
|
| 0x81
|
0x9B6A6F64
|
|
| 0x82
|
0x51164951
|
|
| 0x83
|
0x373ECF8A
|
|
| 0x84
|
0x2659535C
|
|
| 0x85
|
0x4295D497
|
|
| 0x86
|
0x701535FC
|
sceSysconGetLogInfoForDriver
|
| 0x87
|
0x4E55CF5E
|
sceSysconLogStartForDriver
|
| 0x88
|
0x487D97F3
|
sceSysconLogReadDataForDriver
|
| 0x89
|
0x9C0B1E61
|
sceSysconLogStartWaitingForDriver
|
| 0x90
|
0x299B1CE7
|
sceSysconVsReadDataForDriver
|
| 0x91
|
0xE26488B9
|
sceSysconVsWriteDataForDriver
|
| 0xA0
|
second_loader
|
See Ernie Secure.
|
| 0xB0
|
0x058941D7
|
??
|
| 0xB1
|
0xDF8C6D2D
|
sceSysconCtrlWirelessPowerDownForDriver
|
| 0xB2
|
0xDECCB2B4
|
sceSysconCtrlHostOutputViaDongleForDriver
|
| 0xB3
|
0x33B5CDB3
|
??
|
| 0xB4
|
0xF6D4DDC4
|
??
|
| 0xB5
|
0x00AE3AEB
|
|
| 0xB6
|
0x0D300158
|
|
| 0xB7
|
0x91EF4EC3
|
??
|
| 0xC0
|
|
|
| 0xC1
|
0x94AB13CC
|
sceSysconErnieShutdownForDriver
|
| 0xD0
|
|
|
| 0xD1
|
|
|
| 0xD2
|
second_loader, SNVS functions
|
See Ernie Secure. SNVS RW.
|
| 0xD3
|
|
|
| 0x100
|
0x145F59A4
|
sceSysconGetControlsInfoForDriver
|
| 0x103
|
0x1503D6A0
|
sceSysconGetMultiCnInfoForDriver
|
| 0x120
|
0x76272CB9
|
??
|
| 0x130
|
module_start
|
?? used during SysconInit
|
| 0x131
|
0xF99BC858
|
?? Added on a FW higher than 2.50.
|
| 0x181
|
0xCFCEE733
|
|
| 0x190
|
0x8AAB6308
|
sceSysconSetMultiCnPortForDriver
|
| 0x1B0
|
0xE7893732
|
|
| 0x380
|
0xF492E69E
|
sceSysconGetTouchpanelDeviceInfoForDriver
|
| 0x38A
|
0xA1F1B973
|
??
|
| 0x390
|
0x030D447F
|
sceSysconGetTouchpanelDeviceInfo2ForDriver
|
| 0x392
|
0x48ED8981, 060E55C1
|
|
| 0x393
|
0x9A28BEEF, 0x8874EF45
|
used in SceSblUpdateMgr
|
| 0x3A9
|
0x010F95D9
|
|
| 0x3AB
|
0x357CC9D9
|
|
| 0x3AC
|
0x3664E2C0
|
??
|
| 0x3AF
|
0xB8F4F4E3
|
|
| 0x3B9
|
0x42E599AC
|
|
| 0x3BB
|
0xCCA56A16
|
|
| 0x3BC
|
0x2E6D97CD
|
??
|
| 0x3BF
|
0x240A604E
|
|
| 0x3C2
|
0x5946B29B, 0x10327C64
|
used in SceSblUpdateMgr
|
| 0x480
|
0xD01E64FC
|
??
|
| 0x481
|
0x9A7858B6
|
??
|
| 0x800
|
0xA2FE9BF9
|
?? related to Ernie#CMD_0x0800 Get USB Info
|
| 0x802
|
0xC562AF3A
|
??
|
| 0x803
|
0x03F11220
|
??
|
| 0x805
|
0xEF810687
|
sceSysconGetUsbDetStatusForDriver
|
| 0x806
|
0xE7F5D3DC
|
Reboots Vita?
|
| 0x807
|
0x253CC522
|
??
|
| 0x820
|
0x727F985A
|
sceSysconCtrlDolceLEDForDriver. PSTV LED on
|
| 0x821
|
0x727F985A
|
sceSysconCtrlDolceLEDForDriver. PSTV LED blink slow
|
| 0x822
|
0x727F985A
|
sceSysconCtrlDolceLEDForDriver. PSTV LED blink fast
|
| 0x840
|
0x4FEC564C
|
sceSysconGetManualChargeModeForDriver
|
| 0x841
|
0x3C3B949C
|
??
|
| 0x842
|
0x1C29C00E
|
??
|
| 0x843
|
0x730E4725
|
??
|
| 0x880
|
0xA039B563
|
??
|
| 0x881
|
0x9BF78047
|
??
|
| 0x884
|
0x3FDD29D6
|
??
|
| 0x885
|
0x79E6DD8B
|
??
|
| 0x886
|
0x62155962
|
sceSysconCtrlHdmiCecPowerForDriver
|
| 0x887
|
0x063425AE
|
maybe sceSysconCtrlMotionSensorPowerForDriver
|
| 0x888
|
0xBE1ADE4F
|
sceSysconCtrlSdPowerForDriver
|
| 0x889
|
0x8D1D97E8
|
sceSysconCtrlAccPowerForDriver
|
| 0x88A
|
0x4FBDA504, 0xA2E85DB9
|
sceSysconCtrlWirelessPowerForDriver, sceSysconCtrlWirelessPower2ForDriver
|
| 0x88B
|
0x5A614349
|
??
|
| 0x88C
|
0xB872E904
|
??
|
| 0x88D
|
0xDD16ABD9
|
??
|
| 0x88E
|
0x7F198FA2
|
maybe related to clock frequency. see Ernie#CMD_0x088E
|
| 0x88F
|
0x40FF3898
|
sceSysconCtrlDeviceResetForDriver ?UsbEtherSmsc and WlanBt related?
|
| 0x890
|
0x285594F8
|
??
|
| 0x891
|
0x04EC7579
|
sceSysconCtrlLEDForDriver
|
| 0x892
|
0x596B17B7
|
ScePower related
|
| 0x893
|
0x2A4B0437
|
ScePower related
|
| 0x899
|
0x5CDDA14D
|
SceHpremote related
|
| 0x89A
|
0x59DC5938
|
SceUdcd and ScePower related
|
| 0x89B
|
0x710A7CF0
|
sceSysconCtrlRMRPowerForDriver
|
| 0x89C
|
0xB1F88B11
|
SceUsbServ related
|
| 0x89D
|
0x6F586D1A
|
sceSysconConfigLEDForDriver
|
| 0x89E
|
0x9CA6EB70
|
ScePower related
|
| 0x89F
|
0xCB41B531
|
??
|
| 0x8A0
|
0x9070F139
|
ScePower related
|
| 0x8A1
|
0x00A65FC1
|
??
|
| 0x8A2
|
0x0826BA07
|
??
|
| 0x8A3
|
0xB841C141
|
??
|
| 0x8A4
|
91D3B7A3
|
??
|
| 0x8B0
|
0x4946538A
|
sceSysconEnableHibernateIOForDriver
|
| 0x8C0
|
0xC6A2C9EF
|
sceSysconCtrlManualChargeModeForDriver
|
| 0x8C5
|
0x3274A925
|
SceUsbServ and SceUsbEtherSmsc related
|
| 0x8C6
|
0xDFB024C4
|
SceSblUpdateMgr related
|
| 0x8C7
|
0x87FF8041
|
??
|
| 0x8C8
|
0x7BFA95DA
|
??
|
| 0x8C9
|
0x451C1662
|
??
|
| 0x8CA
|
0x79074DE4
|
??
|
| 0x8CB
|
0x7D25F6D2
|
??
|
| 0x8CC
|
0xD2ADABCA
|
??
|
| 0x8CE
|
0x3B354824
|
sceSysconGetTemperatureLog
|
| 0x8CF
|
0x3843D657
|
sceSysconClearTemperatureLog
|
| 0x8D0
|
0xF87679EE
|
??
|
| 0x900
|
0xC562AF3A
|
??
|
| 0x901
|
0x03F11220
|
??
|
| 0x902
|
0xAD0A8275
|
??
|
| 0x903
|
0x26F9D729
|
?? Added on a FW higher than 2.50.
|
| 0x904
|
0x9ADC9936
|
sceSysconGetBatteryCalibDataForDriver
|
| 0x980
|
0x68E0031E
|
sceSysconGetBatteryVersionForDriver
|
| 0x981
|
0x9070F139
|
ScePower related
|
| 0x982
|
0x00A65FC1
|
??
|
| 0x983
|
0x0826BA07
|
??
|
| 0x984
|
0xB841C141
|
??
|
| 0x985
|
0x91D3B7A3
|
??
|
| 0x989
|
0x87DA378D
|
sceSysconBatterySWResetForDriver
|
| 0x98A
|
0xF93CF833
|
??
|
| 0x98B
|
0xE1885F68
|
??
|
| 0x98C
|
0xCD73079D
|
??
|
| 0x9B0
|
0x2CEF078E
|
sceSysconBatteryStartBLModeForDriver
|
| 0x9B1
|
0xE4AE7852
|
sceSysconBatteryStopBLModeForDriver
|
| 0x9B2
|
0xE4F29744
|
sceSysconBatterySetBLCommandForDriver
|
| 0x9B3
|
0x74B2AB55
|
sceSysconBatteryExecBLCommandForDriver
|
| 0x9B4
|
0x448DAFF1
|
sceSysconBatteryReadBLCommandForDriver
|
| 0xA82
|
0x7BAFE083
|
??
|
| 0x1080
|
0x81A6060D
|
sceSysconNvsSetRunModeForDriver
|
| 0x1081
|
0x2EC6D55D
|
sceSysconNvsSetUnkModeForDriver
|
| 0x1082
|
0xACAFA2B8
|
sceSysconNvsReadDataForDriver
|
| 0x1083
|
0x10C9657A
|
sceSysconNvsWriteDataForDriver
|
| 0x1100
|
0xD2F456DC
|
sceSysconGetErnieDLVersionForDriver
|
| 0x1101
|
|
|
| 0x1180
|
0x9B00BC7F
|
sceSysconUpdaterSetSegmentForDriver
|
| 0x1181
|
0x356B9696, 0x734544E4
|
sceSysconUpdaterLoadSegmentForDriver, sceSysconUpdaterLoadSegment2ForDriver
|
| 0x1182
|
0x69AD76E4
|
sceSysconUpdaterExecProgrammingForDriver
|
| 0x1183
|
0xB487C2FB
|
sceSysconUpdaterSetRunModeForDriver
|
| 0x1184
|
0xC7747A63
|
sceSysconUpdaterExecFinalizeForDriver
|
| 0x1185
|
0xCBA836FF
|
SceSysconForDriver_CBA836FF
|
| 0x1310
|
0x351946B0
|
??
|
| 0x1382
|
0xA4968B8C
|
sceSysconBeginConfigstorageTransactionForDriver
|
| 0x1383
|
0xFCC3E8EE
|
sceSysconEndConfigstorageTransactionForDriver
|
| 0x1384
|
0x7B9B3617
|
sceSysconCommitConfigstorageTransactionForDriver
|
| 0x1385
|
0x89C5CFD6
|
sceSysconLoadConfigstorageScriptForDriver
|
| 0x1386 (not implemented in Syscon FW)
|
0xCC6F90A8
|
sceSysconVerifyConfigstorageScriptForDriver
|
| 0x1392
|
0xFD65FFCB
|
??
|
| 0x1393
|
0x02350352
|
??
|
| 0x1394
|
0x7DE84CE3
|
??
|
| 0x2080
|
0x44A173F5
|
sceSysconJigOpenPortForDriver
|
| 0x2081
|
0x483FAE05
|
sceSysconJigClosePortForDriver
|
| 0x2082
|
0xD24BF916
|
sceSysconJigSetConfigForDriver
|
| 0x2083
|
|
|
| 0x2084
|
|
|
| 0x2085
|
|
|
Callbacks
All the following exports have this function prototype: int sceSysconSet*Callback(void (*func)(int enable, void *argp), void *argp);.
Maybe we will find more same as on PSP: SilverSpring's PSP Syscon callbacks enum.
| NID |
Function |
Description
|
| 0x129EA022 |
?? |
??
|
| 0x14730196 |
?? |
??
|
| 0x2D471528 |
?? |
??. Set by ScePower. Very similar to SYSCON_CB_LOW_BATTERY.
|
| 0x32418370 |
sceSysconSetAlarmCallbackForDriver |
SYSCON_CB_ALARM. Set by ScePower.
|
| 0x3F0DB7C0 |
sceSysconSetLowBatteryCallbackForDriver |
SYSCON_CB_LOW_BATTERY. Set by ScePower.
|
| 0x773B8126 |
sceSysconSetThermalAlertCallbackForDriver |
SYSCON_CB_THERMAL_ALERT. Set by ScePower.
|
| 0x80D6E061 |
?? |
??. Set by ScePower.
|
| 0x9F8340FF |
?? |
??
|