UDC
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
There is a USB client on handheld PS Vita devices. It uses a proprietary multi-connector on the OLED (PCH-1XXX) units and a micro-USB on the LCD (PCH-2XXX) units.
PCH-1XXX Pinout
Because of the existence of the USB Ethernet adaptor, there exists a way to use the port in host mode probably through USB OTG or something similar.
Teardown of PS Vita OLED dock here.
| Pin | Name | Description |
|---|---|---|
| 1 | Power? | N/C on cables and DevKit USB Ethernet adaptor, but connected on TestKit USB Ethernet adaptor. Goes to SN99057 pins 31-32. |
| 2 | Power? | Same net as pin 1 |
| 3 | Dock Analog Ground (TRRS Pin 3) | For stereo audio output |
| 4 | Dock Right Channel Audio (TRRS Pin 2) | To audio codec IC |
| 5 | Dock Left Channel Audio (TRRS Pin 1) | To audio codec IC |
| 6 | Syscon UART RX | See UART Console |
| 7 | Syscon UART TX | See UART Console |
| 8 | Syscon UART CTS | See UART Console |
| 9 | Syscon UART RTS | See UART Console |
| 10 | Audio? | To audio codec IC. Not seen used anywhere. |
| 11 | Accessory Enable/OTG | Digital signal. Pull-down to GND on dock. To Syscon (C11). Connected on USB Ethernet adaptor. Pulling to ground with pin 12 enables host usb mode. ADC sense? |
| 12 | Dock TRRS Pin 4 | Digital signal. To Syscon (F9). Connected on USB Ethernet adaptor. |
| 13 | ? | To Syscon (G4). Not seen used anywhere. |
| 14 | GND 1 | GND on PS Vita and USB Ethernet adaptor. N/C on charging cable and dock. |
| 15 | Outputs 2.5v on retail when MultiCn is in host mode | To large ceramic chip. 125K pull-down. |
| 16 | GND 2 | GND on PS Vita. N/C on USB Ethernet adaptor and charging cable. Small cap to USB GND on dock. |
| 17 | VCC | +5V VDC |
| 18 | VCC | Same net as pin 17 |
| 19 | GND 3 | GND on PS Vita and charging cable. N/C on USB Ethernet adaptor. Large cap to USB GND on dock. |
| 20 | D- | USB Data |
| 21 | D+ | USB Data |
PCH-2XXX Pinout
Port is a standard micro-USB Type B. USB OTG is also supported in hardware and software, as there is an Ethernet adaptor containing a micro-USB 2.0 type B connector as well (there exists a rare PTEL-20xx TestKit Ethernet Adapter: https://i.ibb.co/HDNHNDx/image0.jpg)
The "CBPS" also managed to get USB OTG working and was able to mount a USB drive via VitaShell.
| Pin | Name | Description |
|---|---|---|
| 1 | VCC | +5V VDC |
| 2 | D- | USB Data |
| 3 | D+ | USB Data |
| 4 | ID | USB OTG |
| 5 | GND | Ground |