GPIO Registers: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 86: | Line 86: | ||
| ? | | ? | ||
|} | |} | ||
It seems each of the 5 Interrupt enable/clear registers correspond to the 5 <code>GpioGate[i]</code> Interrupt IDs in [[Interrupts#Registered_Interrupts]]. | |||
== GPIO Bus 0 ports == | == GPIO Bus 0 ports == |
Revision as of 06:39, 27 May 2021
MMIO Interfaces
Name | Physical address |
---|---|
SceGpio0Reg | 0xE20A0000 |
SceGpio1Reg | 0xE0100000 |
Registers
Offset | Size | Description |
---|---|---|
0x00 | 4 | Port mode (1=out, 0=in) (1 bit each port) |
0x04 | 4 | Port read (1=low, 0=high?) (1 bit each port) |
0x08 | 4 | Port set (1 bit each port) |
0x0C | 4 | Port clear (1 bit each port) |
0x14 | 4 | Interrupt mode (2 bits each port) for interrupts 0-15 |
0x18 | 4 | Interrupt mode (2 bits each port) for interrupts 16-31 |
0x34 | 4 | Port read latched? (1=low, 0=high?) (1 bit each port) |
0x38 | 4 | Interrupt status/clear? (1 bit each port) |
0x3C | 4 | Interrupt status/clear? (1 bit each port) |
0x40 | 4 | Interrupt status/clear? (1 bit each port) |
0x44 | 4 | Interrupt status/clear? (1 bit each port) |
0x48 | 4 | Interrupt status/clear? (1 bit each port) |
Interrupt mode bits
Value | Mode |
---|---|
0 | ? |
1 | ? |
2 | ? |
3 | ? |
It seems each of the 5 Interrupt enable/clear registers correspond to the 5 GpioGate[i]
Interrupt IDs in Interrupts#Registered_Interrupts.
GPIO Bus 0 ports
Port | Description |
---|---|
0 | OLED/LCD |
1 | unk |
2 | unk |
3 | Syscon related (output) |
4 | Syscon related (input) |
5 | UDCD (USB Device Controller Driver) related |
6 | Game Card reader LED |
7 | PS Button Blue LED (only blue ?? no red?) |
8 | unk |
9 | Camera |
10 | unk. Used in 0.996 SceEnumWakeUp. |
11 | unk. Used in 0.996 SceEnumWakeUp. |
12 | UDCD (USB Device Controller Driver) related |
13 | HDMI related (input) |
14 | unk |
15 | HDMI related (output) |
16 | GPO 0 (General Purpose Output - DevKit LED 0) |
17 | GPO 1 (General Purpose Output - DevKit LED 1) |
18 | GPO 2 (General Purpose Output - DevKit LED 2) |
19 | GPO 3 (General Purpose Output - DevKit LED 3) |
20 | GPO 4 (General Purpose Output - DevKit LED 4) |
21 | GPO 5 (General Purpose Output - DevKit LED 5) |
22 | GPO 6 (General Purpose Output - DevKit LED 6) |
23 | GPO 7 (General Purpose Output - DevKit LED 7) |
24 | UDCD (USB Device Controller Driver) related |
25 | unk |
26 | unk |
27 | Motion related |
28 | Motion related |
29 | SDIF related |
30 | 3G Modem related |
31 | unk |
GPIO Bus 1 ports
Port | Description |
---|---|
7 | LCD related. Backlight? |
Interrupt mode used by PSVita OS
Bus | Port | Interrupt mode | Description |
---|---|---|---|
0 | 4 | 3 | Syscon input |