SceLowio: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
Line 669: Line 669:
<source lang="C">
<source lang="C">
// pSize should take values: 0x8500, 0x8580
// pSize should take values: 0x8500, 0x8580
int sceDsiQeuryResolutionSizeForDriver(SceSize *pSize);</source>
int sceDsiQeuryResolutionSizeForDriver(SceSize *pResSize);</source>


== SceIftuForDriver ==
== SceIftuForDriver ==

Revision as of 22:59, 6 April 2020

Module

Known NIDs

Version Name World Privilege NID
1.69 SceLowio Non-secure Kernel 0x19E0E42F
3.65 SceLowio Non-secure Kernel 0xEE520DFD

Libraries

Known NIDs

Version Name World Visibility NID
1.69 ScePervasiveForDriver Non-secure Kernel 0xE692C727
1.69 SceGpioForDriver Non-secure Kernel 0xF0EF5743
1.69 ScePwmForDriver Non-secure Kernel 0xECEAE2D0
1.69 SceI2cForDriver Non-secure Kernel 0xE14BEF6E
1.69 SceGrabForDriver Non-secure Kernel 0x81C54BED
1.69 SceCdramForDriver Non-secure Kernel 0xC8CD941E
1.69 SceDsiForDriver Non-secure Kernel 0xEC897883
1.69 SceIftuForDriver Non-secure Kernel 0xCAFCFE50
1.69 SceCsiForDriver Non-secure Kernel 0xD85C8E44

ScePervasiveForDriver

?get_kermit_revision?

Version NID
0.990-3.60 0x714EEFB7

Returns <= 0 if Kermit revision is below 2.0. 

int get_kermit_revision(void);

scePervasiveCecClockOutEnableForDriver

Version NID
0.940-3.60 0x26B51075

scePervasiveCecClockOutDisableForDriver

Version NID
0.940-3.60 0xD185D235

scePervasiveCameraBusClockSelectForDriver

Version NID
0.940-3.60 0x589D0291 
// bus_clock can be either 2 (DOWN) or 5 (UP)
int scePervasiveCameraBusClockSelectForDriver(int bus_clock);

ScePervasiveForDriver_18DD8043

Version NID
3.60 0x18DD8043

Turns off the clock (&= ~mask) of the device (UART) at offset 0x120 + 4 * device with mask = 1. 

int ScePervasiveForDriver_18DD8043(int uart_bus);

ScePervasiveForDriver_243D0E78

Version NID
3.60 0x243D0E78 
int ScePervasiveForDriver_243D0E78_get_dsi_clock_info(int pixelclock, int info0[2], int info1[2]);

scePervasiveIftuDsiClkGateDisableForDriver

Version NID
0.940-3.60 0x25AE181E

Temp name was ScePervasiveForDriver_25AE181E_dsi_clock_disable. 

int scePervasiveIftuDsiClkGateDisableForDriver(int bus, int value);

ScePervasiveForDriver_2F195C97

Version NID
3.60 0x2F195C97

Turns on the clock (|= mask) of the device (GPIO) at offset 0x100 with mask = 1. 

int ScePervasiveForDriver_2F195C97(void);

scePervasiveRemovableMemoryGetCardInsertStateForDriver

Version NID
3.60 0x551EEE82 
int scePervasiveRemovableMemoryGetCardInsertStateForDriver(void);

ScePervasiveForDriver_64ABE589

Version NID
3.60 0x64ABE589 
int ScePervasiveForDriver_64ABE589_msif_clock(int clock);

ScePervasiveForDriver_731A097D

Version NID
3.60 0x731A097D

Puts the device (GPIO) at offset 0x100 in reset (|= mask) with mask = 1. 

int ScePervasiveForDriver_731A097D(void);

ScePervasiveForDriver_788B6C61

Version NID
3.60 0x788B6C61

Puts the device (UART) at offset 0x120 + 4 * device in reset (|= mask) with mask = 1. 

int ScePervasiveForDriver_788B6C61(int uart_bus);

ScePervasiveForDriver_78C34032

Version NID
3.60 0x78C34032

Puts the device at offset 0x100 (GPIO) out of reset (&= ~mask) with mask = 1. 

int ScePervasiveForDriver_78C34032(void);

ScePervasiveForDriver_7B16F900

Version NID
3.60 0x7B16F900

Puts the device (SPI) at offset 0x104 + 4 * device in reset (|= mask) with mask = 1. 

int ScePervasiveForDriver_7B16F900(int device);

ScePervasiveForDriver_81A155F1

Version NID
3.60 0x81A155F1

Returns the SceLowio's mapped ScePervasiveMisc virtual address. 

void *ScePervasiveForDriver_81A155F1(void);

ScePervasiveForDriver_8BAB45F8

Version NID
3.60 0x8BAB45F8

Changes UART baudrate. (There are 7 UART devices). Check SceUartClkgenReg. for more info. 

int ScePervasiveForDriver_8BAB45F8(int uart_device, int baudrate);

ScePervasiveForDriver_91C80C41

Version NID
3.60 0x91C80C41 
int ScePervasiveForDriver_91C80C41_set_dsi_bus_pixelclock(int bus, int pixelclock);

ScePervasiveForDriver_8A85E36B

Version NID
3.60 0x8A85E36B

Puts the device at offset 0x10 (? GpuEs4 related (Secure)) out of reset (&= ~mask) with mask = 1. 

int ScePervasiveForDriver_8A85E36B(void);

ScePervasiveForDriver_A7CE7DCC

Version NID
3.60 0xA7CE7DCC

Puts the device (UART) at offset 0x120 + 4 * device out of reset (&= ~mask) with mask = 1. 

int ScePervasiveForDriver_A7CE7DCC(int uart_bus);

ScePervasiveForDriver_A7E64C6F

Version NID
3.60 0xA7E64C6F

Puts the device at offset 0x30 (Venezia) out of reset (&= ~mask) with mask = 1. 

int ScePervasiveForDriver_A7E64C6F(void);

ScePervasiveForDriver_A85BF98A

Version NID
3.60 0xA85BF98A

Turns off the clock (&= ~mask) of the device (SPI) at offset 0x120 + 4 * device with mask = 1. 

int ScePervasiveForDriver_A85BF98A(int device);

scePervasiveIftuDsiClkGateEnableForDriver

Version NID
0.940-3.60 0xBC42C72F

Temp name was ScePervasiveForDriver_BC42C72F_dsi_clock_enable. 

int scePervasiveIftuDsiClkGateEnableForDriver(int bus, int value);

ScePervasiveForDriver_DFD96BFC

Version NID
3.60 0xDFD96BFC

Turns on the clock (|= mask) of the device (SPI) at offset 0x104 + 4 * device with mask = 1. 

int ScePervasiveForDriver_DFD96BFC(int device);

scePervasiveIftuDsiResetEnableForDriver

Version NID
0.940-3.60 0xE3FC1C8D

Temp name was ScePervasiveForDriver_E3FC1C8D_dsi_reset_enter. 

int scePervasiveIftuDsiResetEnableForDriver(int bus, int value);

ScePervasiveForDriver_E4B145AE

Version NID
3.60 0xE4B145AE

Puts the device (SPI) at offset 0x104 + 4 * device out of reset (&= ~mask) with mask = 1. 

int ScePervasiveForDriver_E4B145AE(int device);

ScePervasiveForDriver_EB176898

Version NID
3.60 0xEB176898

Turns off the clock (&= ~mask) of the device (GPIO) at offset 0x100 with mask = 1. 

int ScePervasiveForDriver_EB176898(void);

ScePervasiveForDriver_EFD084D8

Version NID
3.60 0xEFD084D8

Turns on the clock (|= mask) of the device (UART) at offset 0x120 + 4 * device with mask = 1. 

int ScePervasiveForDriver_EFD084D8(int uart_bus);

scePervasiveIftuDsiResetDisableForDriver

Version NID
0.940-3.60 0xFFB43AC2

Temp name was ScePervasiveForDriver_FFB43AC2_dsi_reset_exit. 

int scePervasiveIftuDsiResetDisableForDriver(int bus, int value);

SceGpioForDriver

If bus is 0, the SceGpio0Reg registers are used, and if bus is 1, the SceGpio1Reg registers are used.

ksceGpioQueryIntr

Version NID
3.60 0x010DC295 
int ksceGpioQueryIntr(int bus, int port);

ksceGpioSetPortMode

Version NID
3.60 0x372022A4 
int ksceGpioSetPortMode(int bus, int port, int mode);

ksceGpioSetIntrMode

Version NID
3.60 0xBBEA1DDC 
int ksceGpioSetIntrMode(int bus, int intr, int mode);

sceGpioPortSetForDriver

Version NID
0.990-3.60 0xD454A584 
int sceGpioPortSetForDriver(int bus, int port);

sceGpioPortClearForDriver

Version NID
0.990-3.60 0xF6310435 
int sceGpioPortClearForDriver(int bus, int port);

ksceGpioAcquireIntr

Version NID
3.60 0x35AAD77A 
int ksceGpioAcquireIntr(int bus, int intr);

ScePwmForDriver

         ScePwmForDriver_0374213C: 0x0374213C
         ScePwmForDriver_13161CCC: 0x13161CCC
         ScePwmForDriver_22C17D24: 0x22C17D24
         ScePwmForDriver_514773B1: 0x514773B1
         ScePwmForDriver_99911920: 0x99911920

SceI2cForDriver

Types

typedef struct SceI2cDebugHandlers {
	unsigned int size;
	void (*write_start)(int bus, int device, unsigned char *buffer, int size);
	void (*write_error)(int bus, int error, int result);
	void (*read_start)(int bus, int device, unsigned char *buffer, int size);
	void (*read_error)(int bus, int error, int result);
	void (*write_read_start)(int bus, int write_device, unsigned char *write_buffer, int write_size);
	void (*write_read_error)(int bus, int error, int result);
} SceI2cDebugHandlers;
Version NID Name
3.60 0x0A40B7BF int sceI2cTransferWriteRead(int bus, unsigned int write_dev_id, const void *write_buffer, int write_size, unsigned int read_dev_id, void *read_buffer, int read_size);
3.60 0x30CF9469
3.60 0x76D277AB sceI2cReset(int bus);
3.60 0x9CF8F3D6 sceI2cInit(int bus);
3.60 0xA2C7CE62 int sceI2cSetDebugHandlers(int bus, SceI2cDebugHandlers *debug_handlers)
3.60 0xCA94A759 int sceI2cTransferWrite(int bus, unsigned int device_address, const void *buffer, unsigned int size);
3.60 0xD1D0A9A4 int sceI2cTransferRead(int bus, unsigned int device_address, void *buffer, unsigned int size);
3.60 0xE449AC6E

SceGrabForDriver

         SceGrabForDriver_072B8D93: 0x072B8D93
         SceGrabForDriver_188BBCC8: 0x188BBCC8
         SceGrabForDriver_1F292554: 0x1F292554
         SceGrabForDriver_379130B2: 0x379130B2
         SceGrabForDriver_5F36ABC4: 0x5F36ABC4
         SceGrabForDriver_B22EE8BC: 0xB22EE8BC
         SceGrabForDriver_E9C25A28: 0xE9C25A28
         SceGrabForDriver_F13C63DD: 0xF13C63DD

SceCdramForDriver

         SceCdramForDriver_0657FC1B: 0x0657FC1B
         SceCdramForDriver_2D728EBF: 0x2D728EBF
         SceCdramForDriver_3EFA7540: 0x3EFA7540

SceDsiForDriver

sceDsiStopMasterForDriver

Version NID
0.940-3.60 0x114D1413

Temp name was ksceDsiDisableHead. 

int sceDsiStopMasterForDriver(int master);

ksceDsiDcsRead

Version NID
3.60 0x3FB0DF1F 
int ksceDsiDcsRead(int head, unsigned short param, void *buff, unsigned int size);

MIPI DSI DCS Read (0x06)

ksceDsiGetPixelClock

Version NID
3.60 0x4DF9E924 
int ksceDsiGetPixelClock(int head);

sceDsiStartMasterForDriver

Version NID
0.940-3.60 0x5BE5AA9B

Temp name was ksceDsiEnableHead. 

int sceDsiStartMasterForDriver(int master);

SceDsiForDriver_6F8029A1

Version NID
3.60 0x6F8029A1 
int SceDsiForDriver_6F8029A1(int head);

Returns the current Vcount, read from ((*(u32 *)(SceDsiReg + 0x4C) >> 16) & 0x1FFF) - 1.

sceDsiStopDisplayForDriver

Version NID
0.940-3.60 0x7640F607 
int sceDsiStopDisplayForDriver(int head);

sceDsiSetDisplayModeForDriver

Version NID
3.60 0x78E6E3CF

Temp name was ksceDsiSetLanesAndPixelSize. 

int sceDsiSetDisplayModeForDriver(int head, int lanes, int pixelsize);

For head == 0 (OLED/LCD), lanes must be 2 and pixelsize 24.

For head == 1 (HDMI), lanes can be 2 or 3 and pixelsize can be 24 or 30.

SceDsiForDriver_8610B795

Version NID
3.60 0x8610B795 
int SceDsiForDriver_8610B795(int head, int mul, int div);

Sets internal struct member struct[head].unk1C = mul * struct[head].unk18 / div.

ksceDsiGenericShortWrite

Version NID
3.60 0x89C00D2F 
int int ksceDsiGenericShortWrite(int head, int param0, int param1, int param2);

Performs a MIPI DSI Generic Short Write, no parameters (0x03), MIPI DSI Generic Short Write, 1 parameter (0x13) or MIPI DSI Generic Short Write, 2 parameters (0x23) depending on the whether parami is negative or not (bit 31 set).

ksceDsiSetVic

Version NID
3.60 0x97BFEA76 
int ksceDsiSetVic(int head, int vic);

ksceDsiGenericReadRequest

Version NID
3.60 0x98120684 
int ksceDsiGenericReadRequest(int head, int param, void *buff, unsigned int size);

Performs a MIPI DSI Generic Read Request, no parameters (0x04), or MIPI DSI Generic Read Request, 1 parameter (0x14) depending on the whether param is negative or not (bit 31 set).

ksceDsiGetVicResolution

Version NID
3.60 0xB3A70C05 
int ksceDsiGetVicResolution(int vic, int *width, int *height);

ksceDsiDcsShortWrite

Version NID
3.60 0xBA6BC89F 
int ksceDsiDcsShortWrite(int head, unsigned short param0, int param1);

If param1 is negative (bit 31 set), MIPI DSI DCS Short Write, no parameters (0x05) is performed. MIPI DSI DCS Short Write, 1 parameter (0x15) is performed otherwise.

sceDsiStartDisplayForDriver

Version NID
0.940-3.60 0xC2E85919 
int sceDsiStartDisplayForDriver(int master, unsigned int control);

SceDsiForDriver_F2921E29

Version NID
3.60 0xF2921E29 
int SceDsiForDriver_F2921E29(int head, unsigned int unk);

sceDsiQeuryResolutionSizeForDriver

Version NID
0.940-3.60 0xFA9E2DC5 
// pSize should take values: 0x8500, 0x8580
int sceDsiQeuryResolutionSizeForDriver(SceSize *pResSize);

SceIftuForDriver

typedef struct SceIftuFrameBuf {
	unsigned int pixelformat;
	unsigned int width; /* Aligned to 16 */
	unsigned int height; /* Aligned to 8 */
	unsigned int leftover_stride; /* (pitch - aligned_w) * bpp */
	unsigned int leftover_align; /* if YCbCr: (width >> 1) & 0xF [chroma align?] */
	unsigned int paddr0;
	unsigned int paddr1;
	unsigned int paddr2;
} SceIftuFrameBuf; /* size = 0x20 */

typedef struct SceIftuPlaneState {
	SceIftuFrameBuf fb;
	unsigned int unk20; // always 0?
	unsigned int src_x; // in (0x10000 / 960) multiples ?
	unsigned int src_y; // in (0x10000 / 544) multiples ?
	unsigned int src_w; // seems to be width downscale in fixed point 16.16: (src_width * 0x10000) / dst_width
	unsigned int src_h; // seems to be height downscale in fixed point 16.16: (src_height * 0x10000) / dst_height
	unsigned int dst_x;
	unsigned int dst_y;
	unsigned int dst_w;
	unsigned int dst_h;
	unsigned int vtop_padding;
	unsigned int vbot_padding; /* h - aligned_h */
	unsigned int hleft_padding;
	unsigned int hright_padding; /* w - aligned_w */
} SceIftuPlaneState; /* size = 0x54 */

typedef struct SceIftuCscParams {
	unsigned int post_add_0; /* 10-bit integer */
	unsigned int post_add_1_2; /* 10-bit integer */
	unsigned int post_clamp_max_0; /* 10-bit integer */
	unsigned int post_clamp_min_0; /* 10-bit integer */
	unsigned int post_clamp_max_1_2; /* 10-bit integer */
	unsigned int post_clamp_min_1_2; /* 10-bit integer */
	unsigned int ctm[3][3]; /* S3.9 fixed point format */
} SceIftuCscParams; /* size = 0x3C */

typedef struct SceIftuConvParams {
	unsigned int size;
	unsigned int unk04;
	SceIftuCscParams *csc_params1; // +0x08
	SceIftuCscParams *csc_params2; // +0x0C
	unsigned int csc_control; // +0x10
	unsigned int unk14;
	unsigned int unk18;
	unsigned int unk1C;
	unsigned int alpha;
	unsigned int unk24;
} SceIftuConvParams; /* size = 0x28 */

sceIftuEnableForDriver

Version NID
0.940-3.60 0x0D7C02F7

Temp name was SceIftuForDriver_0D7C02F7_plane_enable. 

int sceIftuEnableForDriver(unsigned int plane);

SceIftuForDriver_0FCBF457

Version NID
3.60 0x0FCBF457

Set plane CSC (Color Space Conversion) information. 

int SceIftuForDriver_0FCBF457_set_plane_csc2(unsigned int plane, SceIftuCscParams *param);

SceIftuForDriver_357EAE24

Version NID
3.60 0x357EAE24

Sets plane alpha value. Only planes 1 and 3 support alpha blending. Supported alpha values are 0-0x100 where 0x100 is no transparency (alpha blending disable). 

int SceIftuForDriver_357EAE24_set_plane_alpha(unsigned int plane, int alpha);

sceIftuSetInputFrameBufferForDriver

Version NID
0.940-3.60 0x7CE0C4DA

Setups a plane or fb? 

int sceIftuSetInputFrameBufferForDriver(unsigned int index, SceIftuPlaneState *plane_state, int flags, int sync);

sceIftuConvertForDriver

Version NID
0.940-3.60 0x67E37EFC

Temp name was sceIftuCscForDriver.

Performs colorspace conversion (by using SceIftu2Reg). 

int sceIftuConvertForDriver(SceIftuFrameBuf *dst_fb, SceIftuPlaneState *src_plane_state, SceIftuConvParams *conv_params);

sceIftuSetMergeSettingForDriver

Version NID
0.940-3.60 0xAF19FD85

Temp name was SceIftuForDriver_AF19FD85_set_global_blending_control. 

int sceIftuSetMergeSettingForDriver(unsigned int plane, int control);

sceIftuDisableForDriver

Version NID
0.940-3.60 0xC11F30B3

Temp name was SceIftuForDriver_C11F30B3_plane_disable. 

int sceIftuDisableForDriver(unsigned int plane);

SceIftuForDriver_D64F4C6B

Version NID
3.60 0xD64F4C6B

Set plane CSC (Color Space Conversion) information. 

int SceIftuForDriver_D64F4C6B_set_plane_csc(unsigned int plane, SceIftuCscParams *param);

sceIftuSetOutputFormatForDriver

Version NID
0.940-3.60 0xE6EE2C6B

Set plane SRC_WIDTH and SRC_HEIGHT values (in fixed point 16.16). 

int sceIftuSetOutputFormatForDriver(unsigned int plane, int src_width_hi, unsigned int src_height_hi, int src_width_lo, int src_height_lo);

SceCsiForDriver

         SceCsiForDriver_10545393: 0x10545393
         SceCsiForDriver_2AFEA1B0: 0x2AFEA1B0
         SceCsiForDriver_4AE39F26: 0x4AE39F26
         SceCsiForDriver_A1D1805D: 0xA1D1805D
         SceCsiForDriver_B508822B: 0xB508822B
         SceCsiForDriver_FC165297: 0xFC165297
Retrieved from "http://wiki.henkaku.xyz/index.php?title=SceLowio&oldid=13652"