GPIO Registers: Difference between revisions

From Vita Development Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 69: Line 69:
| 0x38
| 0x38
| 4
| 4
| Gate 0 interrupt status/clear (1 bit each port)
| Gate 0 interrupts status/clear (1 bit each port)
|-
|-
| 0x3C
| 0x3C
| 4
| 4
| Gate 1 interrupt status/clear (1 bit each port)
| Gate 1 interrupts status/clear (1 bit each port)
|-
|-
| 0x40
| 0x40
| 4
| 4
| Gate 2 interrupt status/clear (1 bit each port)
| Gate 2 interrupts status/clear (1 bit each port)
|-
|-
| 0x44
| 0x44
| 4
| 4
| Gate 3 interrupt status/clear (1 bit each port)
| Gate 3 interrupts status/clear (1 bit each port)
|-
|-
| 0x48
| 0x48
| 4
| 4
| Gate 4 interrupt status/clear (1 bit each port)
| Gate 4 interrupts status/clear (1 bit each port)
|}
|}



Revision as of 08:08, 27 May 2021

MMIO Interfaces

Name Physical address
SceGpio0Reg 0xE20A0000
SceGpio1Reg 0xE0100000

Registers

Offset Size Description
0x00 4 Port mode (1=out, 0=in) (1 bit each port)
0x04 4 Port read (1=low, 0=high?) (1 bit each port)
0x08 4 Port set (1 bit each port)
0x0C 4 Port clear (1 bit each port)
0x14 4 Interrupt mode (2 bits each port) for interrupts 0-15
0x18 4 Interrupt mode (2 bits each port) for interrupts 16-31
0x1C 4 Gate 0 interrupts enable (1 bit each port)
0x20 4 Gate 1 interrupts enable (1 bit each port)
0x24 4 Gate 2 interrupts enable (1 bit each port)
0x2C 4 Gate 3 interrupts enable (1 bit each port)
0x30 4 Gate 4 interrupts enable (1 bit each port)
0x34 4 Port read latched? (1=low, 0=high?) (1 bit each port)
0x38 4 Gate 0 interrupts status/clear (1 bit each port)
0x3C 4 Gate 1 interrupts status/clear (1 bit each port)
0x40 4 Gate 2 interrupts status/clear (1 bit each port)
0x44 4 Gate 3 interrupts status/clear (1 bit each port)
0x48 4 Gate 4 interrupts status/clear (1 bit each port)

Each of the 5 gates correspond to the 5 GpioGate[i] Interrupt IDs in Interrupts#Registered_Interrupts.

Interrupt mode bits

Value Mode
0 High level-sensing mode
1 Low level-sensing mode
2 Rising edge detection mode
3 Falling edge detection mode

GPIO Bus 0 ports

Port Description
0 OLED/LCD
1 unk
2 unk
3 Syscon related (output)
4 Syscon related (input)
5 UDCD (USB Device Controller Driver) related
6 Game Card reader LED
7 PS Button Blue LED (only blue ?? no red?)
8 unk
9 Camera
10 unk. Used in 0.996 SceEnumWakeUp.
11 unk. Used in 0.996 SceEnumWakeUp.
12 UDCD (USB Device Controller Driver) related
13 HDMI related (input)
14 unk
15 HDMI related (output)
16 GPO 0 (General Purpose Output - DevKit LED 0)
17 GPO 1 (General Purpose Output - DevKit LED 1)
18 GPO 2 (General Purpose Output - DevKit LED 2)
19 GPO 3 (General Purpose Output - DevKit LED 3)
20 GPO 4 (General Purpose Output - DevKit LED 4)
21 GPO 5 (General Purpose Output - DevKit LED 5)
22 GPO 6 (General Purpose Output - DevKit LED 6)
23 GPO 7 (General Purpose Output - DevKit LED 7)
24 UDCD (USB Device Controller Driver) related
25 unk
26 unk
27 Motion related
28 Motion related
29 SDIF related
30 3G Modem related
31 unk

GPIO Bus 1 ports

Port Description
7 LCD related. Backlight?

Interrupt mode used by PSVita OS

Bus Port Interrupt mode Description
0 4 3 Syscon input