Linux Driver Status: Difference between revisions
No edit summary |
|||
Line 11: | Line 11: | ||
|- | |- | ||
| Framebuffer | | Framebuffer | ||
| style="background-color:# | | style="background-color:#ffeec9;" | 25% | ||
| High | | High | ||
| [[IFTU Registers]] | | [[IFTU Registers]] |
Revision as of 14:13, 17 September 2020
This page has the status for driver bringup for Vita Linux and is a good place to start with for people who want to contribute. The priority is determined as follows: high - required for a usable environment, med - required to be livable on it, low - not needed but would be nice to have, extra - not needed at all but bonus points for anyone who gets it working.
Devices
Device | Status | Priority | Links | Notes |
---|---|---|---|---|
Framebuffer | 25% | High | IFTU Registers | Uses pre-configured framebuffer by bootloader |
PMU | 0% | Med | Pervasive SN99057 | |
GPIO | 0% | Med | GPIO Registers | LEDs mostly |
UART | 50% | High | UART Registers UART Console | Console, debugging |
DSI | 0% | High | DSI Registers | Display interface |
CSI | 0% | Low | CSI Registers | Camera interface |
I2S | 0% | Med | I2S Registers | Audio |
I2C | 0% | Med | I2C Registers | PMIC, camera, accelerometer, OLED brightness, clockgen, HDMI control |
SPI | 0% | Med | SPI Registers | Syscon, accelerometer, OLED, touchscreen, touchpad? |
Touch | 0% | Med | SPI | |
Motion | 0% | Low | SPI, some ST chip | |
SDIO | 0% | High | SceSdif [1] | eMMC, GC, Wifi/BT uses this. Standard SD interface. |
MSIF | 0% | Low | MSIF Registers SceMsif SceSblSsMgr | MemoryStick |
WLAN/BT | 0% | Med | Marvell 88W878S-BKB2, SDIO interface | |
eMMC | 0% | High | SDIO interface, standard chip | |
Gamecard | 0% | Med | Game Card | SDIO interface, extra auth (can be disabled and use sd2vita) |
Memory Card | 0% | Low | Memory Card | MSIF interface, extra auth |
GPU | 0% | Med | GPU | SGX543MP4+ |
USB | 0% | Med | EHCI | Ethernet, Audio codec, accessories |
UDC | 0% | Low | UDC SceUdcd | Connecting to host PC |
PSP | 0% | Extra | PSP Emulator | Custom MIPS |
Codec | 0% | Extra | Venezia | Toshiba MeP based |
Plan
Start with the low level interfaces (SPI, I2C, etc). Those are relatively simple. Some might even have standard controller interface (like SDIO). The hardest is probably USB (unless the interface is standard). Then you can implement the devices on top of the interfaces. A lot of the devices seem to use standard chips (WLAN, motion, touch, etc) so we may get them "for free".
For power management, we need sleep/resume first. Would be great is we can use the dynamic clocking features to save battery but that's low priority. Battery fuel gauge is through a standard chip over I2C interface.
Framebuffer might be the hardest. Seems to be a custom interface. If we can find any open source device that uses a similar controller, it would make things a lot easier.